S.I.T.C of Air conditioning arrangement

Amount

Sub Head 1 : Ductable Air Conditioner Unit

Supply & Delivery of Ceiling Suspended Ductable type Split Airconditioners having Microprocessor Based Control System and the following specification

Capacity - 8.5 Tonnage (upto +1 TR acceptable)

Rated Cooling Capacity - 102000 BTU/Hr.

No of IDU - 1 No

Air-flow / IDU - 3400 CFM

No of ODU - 1 or 2 Nos.

Compressor - 2 Nos Scroll Compressor

Refrigerent - R 410A

Condenser & Cooling Coil : Copper coil

Power Supply : 415V, 50 Hz, 3 Ph AC (with applicable tolarance)

Make - Carrier / Voltas / Blue Star / Mitsubishi Electric / Hitachi / Trane / YORK / DIAKIN

Supply & Delivery of Ceiling Suspended Ductable type Split Airconditioners having Microprocessor Based Control System and the following specification

Capacity - 11 Tonnage (upto +1 TR acceptable)

Rated Cooling Capacity - 132000 BTU/Hr.

No of IDU - 1 No

Air-flow / IDU - 4400 CFM

No of ODU - 1 or 2 Nos.

Compressor - 2 Nos Scroll Compressor

Refrigerent - R 410A

Condenser & Cooling Coil : Copper coil

Power Supply : 415V, 50 Hz, 3 Ph AC (with applicable tolarance)

Make - Carrier / Voltas / Blue Star / Mitsubishi Electric / Hitachi / Trane / YORK / DIAKIN

Installation Testing and Commissioning of Ductable Split AirConditioners by making scaffolding arrangement as per site condition, Supply of necessary Refrigerant, connecting Control & power cabling & other necessary materials to complete the job.

8.5 TR Ceiling Suspended Ductable type Split AC

11 TR Ceiling Suspended Ductable type Split AC

Sub Head 2 : Refrigerent Piping

Supply and fixing of following sizes of refrigerant pipe made out of hard drawn copper including accessories, jointing/brazing etc duly insulated with Class-O nitrile tubular rubber sections to prevent condensation with suitable adjustable type hanger supports etc complete as required.

28.60 mm 1.00 mm thick with 19mm thick insulation

22.20 mm 1.00 mm thickwith 19mm thick insulation

15.90 mm 1.00 mm thickwith 19mm thick insulation

12.70 mm 0.80 mm thickwith 19mm thick insulation

Supply & Installation of 6mm Nitrile Rubber insulated PVC / HDPE pipes of following sizes with fitting, accessories, bends, elbows, tees, flanges, U-trap, wall sleeves, hangers, supports, anchors etc for draining condensate water from indoor unit to the nearest drain point.

32 mm Dia

40 mm Dia

50 mm Dia

Sub-Head 3 - Ducting

Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal ( Make-Tata Steel/Sail/Jindal ) rectangular/ round ducting complete with neoprene rubber gaskets,elbows,splitter dampers, vanes, hangers, supports etc as per approved drawings and specifications of following sheet complete as required

Duct tharmal insulation by supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class “O”) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

Supplying & fixing of acoustic insulation inside ducting with 10mm thick open cell nitrile rubber(class O) of density 140Kg / Cum-160 Kg / Cum insulation with bolts nuts GI washers etc as required.

Supply & fixing of underdeck insulation with 50mm thick TF quality Expanded polysterene slab complete with all accessories, required materials etc. [Make - Beardsell/ Astha/ Thermowell]

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications

Supply, installation, testing and commissioning of Flexible Canvas Connection as per direction of the EIC.

Supplying, fixing, testing & commissioning of fresh air provision as per direction of the EIC incl. filter, damper, bird screen etc complete as required.

Sub Head 2 : Room Air Conditioner Hi-wall split

Supply & Delivery of Hi-wall Split Air Conditioner having following specification. Cooling Capacity(BTU/Hr) - 18000 BTU/Hr ISEER - As per 3 Star/2018-19 of BEE/BIS IS compliance - IS 1391 Refrigerant - R410A/R32 Compressor - Rotary/Scroll Evaporator & Condensor Coil : Copper Operating Outdoor Temparature = 50ºC and above

Power Supply - 230V,50Hz ( +Tolerrance as per applicable standard) The scope of work is also includes supply of following (i) Necessary refrigeration copper line with nitrial rubber insulation - 3 mtr (ii) necessary copper cable (FRLS type - make : Finolex/RR Kable/Polycab/Havells/Gloster) - 3mtr [Make: Mitsubishi Electric / General / SHARP]

Installation, Testing & Commissioning of Indoor & Outdoor unit of above Hi wall split AC machine after making hole in wall etc as per direction of EIC including Supply of required Refrigerant, S&F of necessary fixing arrangement for indoor and 40 x 40 x 5 mm MS angle iron frame for outdoor unit, duly painted, laying and making connection of refrigeration pipe, power cable, drain pipe etc as per direction of the EIC.

S&F of additional following items for length exceeding 3 mtr for complete installation and commissioning of aboove AC machines.

(i) Supply & Fixing of extra refrigerant pipe with insulation foam insulation (as requisite dia)

(ii) 3 core PVC insulated FRLS grade copper cable (Make : Finolex / RR Kable / Polycab / Havells / Gloster)

Supply & Fixing of PVC drain pipe (make approved by EIC)

Sub-Head 4-- Misceleneous Items

Supply, fabrication & fixing 3 Nos. M.S. u-channel of 6mm thick of size (100 mm x 40 mm x 40mm) of 1 mtr length for making platform for installation of outdoor unit of ductable packaged split AC incl. drilling 2 Nos. holes in each channel including cutting holes the wall & grouting the same with Cement concrete (1:11/2 :3) etc. fabricated with horizontal angle of 50mm x 50mm X 6mm 6mm of 2 Mtr length including supporting angle 50mm x 50mm x 6mm

in each platform in outer edge for transmitting the load centrally through 2Nos.(50mm x 50mm x6mm) Angle inserted into the exiting wall. The platform should be baricated with verticle angle of 25mm x 25mm x 6mm of 1 mtr. length, abricated on the surface of each Horizontal channel & Angles & interconneed by 25mm x 25mm x 5mm MS patti. Area of platform is 3Mtr. x 1 Mtr.

Supply, laying and termination of 1.1 kv grade following size PVC insulated PVC sheathed unarmoured Copper Cable (Make:-Finolex / RR Kable / Polycab / Havells / Gloster)

3C X 2.5 SqMM

3C X 4 SqMM

3C X 6 SqMM

4C X 2.5 SqMM

4C X 4 SqMM

Supply & Fixing in position boxing for indoor unit suction & return air arrangement with frame work of aluminium hollow section of size 50mmx25mm (2 mm thick) combined with aluminium corners of size 38mm x 25mm suspended by Al hollow tube section of size 38mm x 25mm, 25mm x 25mm powder coated wall angle with aluminium composit panel of thickness 3 mm comprising of protective flim, polyester coating, primer, aluminium foil,

adhesive flim, polyethylene core againwith one layer adhesive flim, aluminium bottom coating and finally service coating as per manufactures specification finished with aluminium screw and silicon esalent including inside acoustic insulation with 10mm thick open cell nitrile rubber(class O) of density 140Kg / Cum-160 Kg / Cum insulation and suitable arrangement for grill fixing complete in all respect as per direction of the EIC.

Terms and condition

The Agency must procure the materials from the Manufacturer / OEM or from their authorised sales channel so that the standard warranty / support of the Manufacturer / OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer / OEM or from their authorized sales channel and standard warranty / support should be sent from the e-mail of the Manufacturer / OEM / authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution, of work / submission of bill. If any refurbished material is supplied and installed, penal action will be taken as per existing rules

CARRION AIR COOLING

GITANJALI ELECTRONICS AND ELECTRICALS

Lyric International