Spl repair /Replacement of LT cables LT panels and Addn/Altr to Bldg No P-18 BC and Provn of car parking shed Adjacent to Bldg NO P-16 and Provn of RO plant in AD Regt under GE Bharatpur

Amount

Excavation in trenches, n. exc 1.5 Mtr wide and n. exc 1.5 Mtr in depth for foundation/laying of cable and getting out in soft/loose soi complete all as specified.

Removing of excavated soil to a distance n. Exc 50 Mtr and depositing where directed at a level n. Exc 1.5 Mtr above the starting point complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers n. Exc 25 cm thick complete all as specified.

Supply & spread unwashed dry river sand for sand cushioning and covering the under ground cable in trenches complete all as specified. (Note :- Punning thickness shall be measured.)

M&L for brick protection with sub Class`B` bricks old size laid dry, flat over cable perpendicular across the cable in trenches complete all as specified.

Supply, laying, testing & commissioning LT XLPE insulated armoured (heavy duty) electric cable with stranded aluminium conductor 1100 volts grade (ISI marked) & laid in trenches/pipes or fixed on pole of the following sizes:-

120 Sqmm 3.5 core

70 Sqmm 3.5 core

50 Sqmm 3.5 core

35 Sqmm 3.5 core

25 Sqmm 4 core

16 Sqmm 4 core

10 Sqmm 2 core

Boring of holes under road, pavement, hard standing by necessary machine for laying under ground pipe up 100mm dia complete all as specified. Note :- GI pipe shall be measured and paid separately.

Taking out old u/s pipe of any size

S & F for laying galvanised steel tubing light grade (ISI marked) for protection of under ground cable on poles/wallsor under road crossing of size 40mm bore complete all as specified.

S & F for laying galvanised steel tubing light grade (ISI marked) for protection of under ground cable on poles/walls or under road crossing of size 80mm bore complete all as specified.

Supply and fixing in replacement of Lithium base Energy efficient integrated Solar street light of 30/32 watt in Aluminium Die casting body / FRP Bpdy ,corrosion resistance,integrated PV panel Automatic dusk to input voltage 12.8V with suitable battery ,Driver efficiency .85%,PV module itself will be used to sense the ambient light to switch ON/OFF the Lamp,inbuilt MPPT charge controller,IP65,both PIR and fixed dimming available,4500 lumens (at full brightness) with grater than 150 lumen per watt,5700ANSI,cool white(5500K-6500K),CRI.70,moptical used, Metal core PCB,Low voltage cutoff ,high power LED,wide beam Angle(120 degree) LED Life 50000 hrs,weight less than 15 kg with GReen/Red indicator swith with suitable battery rating 12.8V-BIS standard of complete all as specified.

Supply, install, test and commissioning factory made THERMOPLASTIC CABLE JUNCTION BOXES IP 66/67 “weather proof”, with terminals for outdoor installation (with knockouts for cable entry) of size 205 x 255 x 112 mm depth with cable entry size of 10-25 sqmm with 4 pole termina capacity 63A each, glands including with flat iron clamps of size 25 x 4mm, nuts and bolts complete all as specified.

Taking out Old unserviciable Earthing of any size and any type,with aterial and labour for renewal of earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to galvanised GI strip of size 32 x 6 mm by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore galvanised iron medium grade and 40 mm bore galvanised iron light grade for earth strip protection including all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion.Note:-Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length.

Supply and fix Reverse Osmosis(RO) Plant of out put capacity of 500 Litres per hour complete with errection and commissioning and testing consisting of the following:- Make : - Ion Exchange Multi Grade Filter incorporating (a) F.R.P. Pressure vessel (b) Multi port valve (c) Initial charge of Media i.e. Peebles (d) Frontal P.V.C. pipe - work and Necessary valves Activated Carbon Filter incorporating (a) F.R.P. Pressure vessel (b) Multi port valve (c) Initial charge of Media i.e. Activated Carbon Granules (d) Frontal P.V.C. pipe - work and Necessary valves. Special Antiscalant Dosing System system incorporating (a) Dosing Pump , Type : Elecronic Diaphragm Doser (b) Dosing Solution Tank Micron Cartridge Filtration system incorporating (a) Micron Cartridge Filter (b) Micron Cartridge Filter Housing High Pressure Pump with motor. Type : Vertical Centrifugal Multi Stage

Reverse Osmosis Module incorporating (a) Reverse Osmosis Membranes (b) R.O. Pressure Tubes (c) Skid Mounted Control Panel (d) Interconnecting pipe-work and fittings. Interconnecting Advance Extra Strong P.V.C. pipe work with necessary valves and fittings T.D.S. Meter Flow Indicator Pressure Switch Pressure Gauges Electronic Control panel consists of :- (a) Over load Protection (b) Individual fault indicator (c) Amp. Meter (d) Volt Meter (e) Hour Meter (f) Hooter

Supply, install, testing & commissioning monoblock hrizontal open well submersible pump set 3 phase, 415V, 50 Hz copper wound with IP-68 protection with no need of priming/foot valve of capacity 5 HP with cast iron impeller and stainless steel shaft and head range 8-22 metres and discharge 90LPM complete all as specified.

Supply, install, testing & commissioning monoblock horizontal pump set electric driven,single phase, copper wound with 'B' class protection, Voltage range 180-240V, self priming of capacity 1 HP with brass impeller and carbon steel shaft and head range 3-42 metres and discharge 250-3300 LPH including PCC foundation complete all as specified.

Supply and fixing GI water tubing medium grade ISI marked with all fittings laid in trenches fixed on wall, floor of size 25 mm dia complete all as specified.

Supply and fixing GI water tubing medium grade ISI Marked with all fittings laid in trenches fixed on wall, floor of size 50 mm dia complete all as specified.

S&F rotational mounted polyetene water tank of (Cylindrical Verticle) with closed top) of 1000 Ltrs capacity hoisted and fixed in position including check nuts &nipples etc complete all as specified.

S&F Gun metal globe of gate valves with iron wheel head screwed both ends for iron pipe of following size:

25mm dia.

50mm dia.

Supply, installing, testing and commissioning factory made and tested (prototype having been CPRI type test certified), LT feeder pillar box (KIOSK), outdoor type and double door with buckled type bush hinges platform mounted, suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, having bus bar chamber with insulated copper bus bars 200 Amps rating installed on procelain insulators. The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet for outer sheet, 5mm thick bottom sheet & 1.2mm thick for inner sheet for individual compartment of MCCB's, bus bar, apron etc. Back side compartment with enclosure duly for space out going cables with extended bus bar/strips for out going MCCB's etc and 40 x 40 x 6mm thick angle iron frame work, externally powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type with aprons for cable entry with double door shutter and locking arrangement , intenal wiring with PVC insulated, solid copper conductor, FRLS cables, IS-694 marked of adequate size but not less than 4 Sqmm. The scope of work includes the following : In coming MCCB TPN 63 Amps rating and 25 kA rupturing capacity complete Out going (a) MCCB TPN 32 Amps rating and 25 kA rupturing capacity complete (b) MCB SPN 20 Amps rating and 25kA rupturing capacity complete (c) Indicator Lamps (d) Voltmeter 0 to 500V (e) Ammeter 0 to 63 Amps

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanized iron earth strip 32x6 mm as earthing lead by means of bolt ,nuts, check nuts and washer of galvanized iron or steel besides welding of all joints and including excavation and earthwork, G.I.pipe light grade 40mm bore for protection of G.I.strip from earth electrode to earth test point supplying and laying charcoal dust, common salt PCC 1:2:4 type CI chamber and MS angle iron frame 40x40x3mm RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm c/c both ways with MS handle 12 mm dia CI funnel and wire mesh, 20 mm dia GI pipe light graded for watering connected to LT panel/Plant incl testing complete all as specified and directed .NOTE: GI pipe 40 mm, GI earth strip 32x6 mm upto 7.5 mtr deemed included to be rate quoted by the contractor.)

Taking out water sample in two bottles for testing of bio and chemical each test as per ISO 10500 for bore well water and treated water complete all as specified.

S&F of DOL starter suitable for centrifugal pumping set 5 HP Capacity, 3 Phase including making connections complete all as specified.

S&F of DOL starter suitable for centrifugal pumping set 1 HP Capacity, Single Phase including making connections complete all as specified.

S&F in repair 15 mm bore stop angle valve, cast copper alloy, chromium plated, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified.

Taking down carefully copper/aluminium point wiring (light, fan, bell,socket or power) complete fittings such as switches, ceiling roses, pendents, holders,regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of wall, floor & ceiling etc complete all as specified.

Dismantling of old U/S sub main wiring and service wire of any size & make complete all as specified.

Dismantlingof old U/S rusted main switch/DB of any size capacity and make complete all as specified.

M&L point wiring complete with 1.5 Sqmm 02 x single core multistranded copper conductor of 1100 volts grade PVC pre insulated FRLS and unsheathed cable enclosed in rigid PVC conduit pipe size not less than 20mm dia with all PVC accessories such as Tee, bend, collar, elbow, square junction box etc fixed on the concealed surface of wall/ceiling by means of PVCsleevel/dash fastners with cadmium plated screws including suitable size SS / MS shunken/metal flush box for mounting of flush type/modular fittings like switches, sockets, fan regulator etc including 1.5 Sqmm PVC insulated but unsheathed copper earth continuity conductor (in green color) to common earth and connedcted to earth dolly complete all as specified and directed for the following :-

One light point controlled by one way switch.

One ceiling fan/wall fan/exhaust fan point controlled by one way switch.

One 3 pin 6 Amp socket point outlet on the same board with other switches

One 3 pin 6 Amp socket point outlet on the independent board

All as per item No 42 above but with multi stranded copper conductor cable 2.5 Sqmm size for 3 pin 16 Amps switch socket outlet on independent board including 2.5 Sqmm copper cable PVC insulated FRLS unsheathed copper continuous earth wire including connecting to common earth dolly complete all as specified.

S&F ceiling rose surface bakelite three terminal ISI marked including suitable size of PVC board complete all as specified.

S&F switch piano flush button single pole one way 6 Amps 230 volt grade complete all as specified.

S&F modular type Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type multi purpose flush type 230 volt complete all as specified.

S&F modular type switch, 15 Amp flush type, complete all as specified.

S&F modular socket 3 pin 15/16 Amps flush type, complete all as specified.

S & F Lamp holder, PVC/polycarbonate type with cord grip cap suitable for pendant fitings complete all as specified.

M&L submain wiring complete with 2X 4 Sqmm single core multi standred PVC insulated and sheathed cable FRLS copper conductor and one run of 4 Sqmm copper cable for earth continuity conductor and including rigid PVC conduit with all PVC accessories fixed on concealed surface complete all as specified.

Distribution board factory made and tested made of sheet metal enclosure powder coated suitable for mounting the MCB 240 volt of the following DBs.

4 way TPN with 200 amps rated busbar 415 volts (double door type).

S&F MCCB/MCB 415/240 volts fixed in DB's of the undermentioned type and rating complete all as specified. Note: Make of MCCB/MCB should be same of DB.

MCB TPN 63 Amps, 415 volts,Category- C curve, 10kA rapturing capacity complete all as specified. ( ISI marked IS-8828)

MCB SP 6-32 Amps, 240 volts,Category- C curve, 10kA rapturing capacity complete all as specified. ( ISI marked IS-8828)

Supply and fixing in repair LED 20 watt LED tubelight fitting retro fit type 4 feet long with replacable rod complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V, 50 Hz, complete all as specified.

S & F street light GI bracket of 0.6 mtr long made out of 40mm dia light grade GI pipe bend to shape of 120 degree end welded at required including 02 Nos MS clamp of FL 40 x 6mm including nuts bolts & washers complete necessary fixing arrangements on pole complete all as specified..

Supply & fix 35/36 watts LED street light fitings new generation energy saving ,environmental friendly ,long life,versatile pressure die cast aluminium IP66 with 10KV surge protection road way,luminaire with high power LED as light source and suitable drivers etc and connecting with 2 x 1 sq mm multistranded PVC insulated copper conductor from fittings to the ceiling rose and fixing tocomplete all as specified.

S&F exhaust fan of 250 mm sweep 900 rpm with suitable size of louvers , connecting wire PVC insulated twisted flexible 0.5 sqmm copper conductor including all standard accessories complete all as specified.

Demolition of Concrete in ground floors and pavings not exc 15cm thick( below or above ground floors) complete all as specified.

Taking out and Supply & laying LT XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of 10 sqmm 4 core sizes in trenches /passing through pipes/ on poles etc complete all as specified.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc Including all arrangments like scaffolding for working platform complete all as specified.

Rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces complete all as specified.

All as above item No 60 but oN other than fair faces of brick work or stone masonry faces in CM (1:6) finished even and smooth without using extra cement, complete all as specified.

M&L for dubbiing out average 10 mm thick in CM (1:4) on irregular face of walls complete all as specified.

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc including finishing the surface even and smooth without using extra cement complete all as specified.

M&L for preparation surface of new plastered walls a and applying two coats of exterior emulsion paint (weather proof anti algae) 100% acrylic emulsion paint over a coat of EXTERIOR WALL PRIMER complete all as specified.

M&L for Two coats of oil emulsion distempering white or tinted using hand oller , over 1mm thick wall care putty on Wall Surface after applying plaster of paris to all uneven surface including sand paper gentle rubbing to obtain smooth surfaces, complete all as specified.

M&L Preparation of newly plastered surfaces of wall & applying three coats of white wash complete all as specified.

M&L for Three coats of white wash on New plastered surfaces of Ceiling complete all as specified.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoin jambs pillars etc complete all as specified.

M&L Brick work with sub class 'B' old size bricks bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified.

All as Item No 69 above but except bricks complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiling to store and rubbish off the premisses

M&L Glazed ceramic Tiles,in verticle surface 350X250 X 7mm/ 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match the existing surface over and including 10 mm thick rendering in CM 1:4 complete all as specified.

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.09 sqm bur not exceeding 0.16 sqmm, over 15 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified.

M&L 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate in ,sub base complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dedo and pillar laid over cement screed 15 mm thick in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for 40 mm thick Sikandra stone jali decorative design of approved pattern by Eng-in-charge including all carving and moulding of corners fixed in cement mortar 1:4 to grooves of stone pillars application with colouring to match with colour of jali including fixing of stone jali for all corners & lift complete all as specified.

S&F stone pillars(post) of size 100x100 mm including engraving decorative design of approved pattern on two face and dome shape approved by GE , height of each post as per sikandra jali, ,making groove on two face of size 43x5 mm for fixing of sikandra Jali in CM 1:4 complete all as specified.

Providing and fixing 20 mm thick gang saw cut Granite of any colour and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade,also including the cost of cutting for fit the accessories , colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete all as specified.

Dismantling stone slabs in roofs, suspended floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified.

M&L for fixing of Chajja stone (of approved quality) of thikness 40mm, wherever required as per approved design, including cost of inserting/fixing of stone . Item includes cost of material , ,safety measures/ use of specified equipments for workers of building required to complete the work at 6m heights & including all leads complete all as specified.

Dismantling of wrought iron or mild steel work of any description & fixed in any position, complete all as specified.

Dismantling corrugated or semi corrugated Asbestos cement sheets in roof coverings complete all as specified.

M&L for sand stone slabs 7.5 cm thick in sun shades, lintel stone , shelves, cills, landings, cover stones, templates, etc. n. exc. 3 m in length, punched dressed on face and along exposed edges, self faced on other side and set in lime mortar 1:2 or cement mortar 1:4 complete all as specified.

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame). complete all as specified.

Taking down chowkats or frames exc. 1.5 sqm but not exc. 4 sqm each without taking off shutters from frames complete all as specified.

S & F powder coted Anodised Aluminium frame for door,windows,vantilators with one or more rebates including joining cleats for fixing etc complete all as specified.

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long 02 Nos suitable handle 01 Nos in each shutter complete all as specified .

S&F Sheet glass ordinary quality 5.5 mm thick and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified.

S&F 35 mm thick 2nd class hardwood( hollock ) (any number of panels) with panels of timber flat on both sides (feather edged) or veneered particle board medium density wood particle board with commercial face veneers, complete all as specified.

S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheeet reinforced with m.s. squre tube complete all as specified.

Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and shown SSR 2020 (Part-II) and Particular specification complete all as specified.

S&F Mild Steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc complete all as specified.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified.

S &FMild steel pressed bow handle oval type stove enameled black of size 150 mm (ISI marked) complete all as specified.

S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed. complete all as specified.

S&F 150 mm long mild steel barrel tower bolts stove enameled black with bright bolt (ISI marked) complete all as specified.

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified.

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified.

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified.

Painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of Zinc chrome primer including preparation of surfaces complete all as specified.

M&L for preparation of new or old untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. -

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any typecomplete all as specified and directed (also including the rate for disposal of building rubish/malba of dismantled or waste material collected after demolition of existing treatment & dumping for lead upto 1km for all lifts) complete all as specified.

M&L for pcc type -B-0 (1:2:4) in roof covering , benching , etc 40 mm thick finished even and smooth with out using extra cement complete all as specified.

M&L for screed bed or bedding layer of cement mortar 1:4, 15 mm thick for floor finished without using extra (mixed with WPC ) complete all as specified. (WPC shall be supplied and paird separetly)

Supply only water proofing compound ISI marked complete all as specified.

S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm and upper side of membrane thermally insulated with white mineral gravel finish, informaly embadded during manufacturing process shall only be used. It shall be laid by torch application,side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming IS:[email protected]/sqm & applied a Hot blown coat of bitumen layer spread over primer @ 2.0 Kg/Sqm complete all as specified.

Cutting holes exc 150 sqcm but n.exc 400 sq cm into or through brick walls, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified.

S & F Fe 410-W (Gde E-250)) quality B rolled mild steel in Joist channel, angle or tee,I fixed independently, without connecting plates etc (cut to ordinary lengths i.e, within 20mm of the length indicated) complete all as specified.

Dismantling of old U/S grating of any description or size and S&F MS chromium plated grating 100mm dia of weight not less than 50gm for floor trap / Nahani trap complete all as specified.

S&Fin repair of PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked of 75mm bore complete all as specified.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&Fin repair of PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, ISI marked of 110mm bore complete all as specified.

Demolition of plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified.

50 mm thick PCC 1:2:4 type B1(using 20mm graded stone aggregate) as in plinth protection over 75 mm thick brocken stone aggregate hard core over rammed earth complete all as specified.

S&F in repair new vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified.

S&F waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe 75cm longh for WHB complete all as specified.

S&F Fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe and fixed of 15 mm bore complete all as specified.

S&F in repairs Bib taps, Fancy type Chromium plated cast copper alloy with crutch or butterfly handle, screwed for iron pipe of 15 mm bore or for brass ferrule and fixed complete all as specified.

S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of polythelene of low or high density or PVC 32mm dia for LLFC complete all as specified.

M&L for PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified.

S&F for in repair Brass Chromium plated Towel rail of grip 600 mm complete all specified.

Dismantling existing water tank and S &F of Rotational moulded polyethylene water storage tanks 500 Ltr (cylinderical vertical with closed top)with ball brass valves,high pressure , with polythene float and flynut complete, hoisted and fixed in position complete all as specified. in SSR part - I .

Taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore

20 mm bore

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 630x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) and including provision of lime concrete bedding complete all as specified.

S & F in repair single piece -WC with UF soft close slim seat cover fixing accessories, Accessories set and cistern fittings size 370 x670 x 720mm S Trap-220mm complete all as specified (Make:-Jaquar Resistered design LYS-WHT-38851S220UFSMN or equivalent in Hindware perryware)

S& F for corner class shelf (with Bracket) Complete all as specified and as directed (Make :-Jaquar cat part No ACN-1173 or eqv in Perryware Hindware)

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar150mm complete all as specified

M&L for 150 mm bore reinforced cement concrete pipe , class NP-2 laid & jointed complete with collars in cm(1:1) with spun yarn & tested . complete all as specified

M&L for Plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore complete all as specified

Providing precast cement concrete in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain with plain fair faces, including chamfers weatherings throating etc. and setting in mortar complete with joints to match, type B-1(20mm graded aggregate) Set in CM1: 4 complete all as specified

S&F mild steel TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified

S& F Viterous china Table top Art basin with CP waste coupling 610mm x 375mmx 115 mm complete all as specified (Make :- Kerovit Catologue No : MYRA KB284 or in Perryware Hindware equivalent)

Providing and fixing in white vitreous china Large ISI Urinal SIze of 382x398x601 mm (Make Kerovit Catologue No :Rasso (isi) Model No-KS507 in Perryware ,Hindware equivalent )and sizes respectively with with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete all as specified

Excavating in post holes ( or similar holes ) each n. exc 0.5 Cum , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around , in layers n.exc 25 cm watering , removing surplues soil to a distance not exceeding 50mtr and making good surface complete all as specified

M&L For PCC 1:3:6 Type C2 using 40mm grade stone aggregate as in foundation complete all as specified

S & F of structural Mild steel tubes hot finished tubes work in built up tubular (round, square or rectangular hollow tubes etc.) trusses,purling ,rafter ,post etc., including cutting, hoisting,wlding ,grinding, fixing in position , welding and bolted with special shaped washers etc. complete also including cost of material ,fixtures ,labours cahrges & Machienery complete all as specified

S&F for chequred or plain MS plates, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment to grade Fe-410W E-250 quality complete all as specified

M&L preparations of newly steel surface and applying two coat of synthetic enamel paint over a coat of primer complete all as specified

Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

Material and labour for Cement concrete in foundations, filling and mass concrete type D2 1:4:8 using 40 mm graded stone aggregate . complete all as specified

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of primer with hand roller complete all as specified

M&L for surface excavation n.exc. (Not exceedings) 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n.exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified

M&L Cement Concrete Type D-2, 1:4:8 40mm graded aggregate 100mm Thick complete all as specified

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade (including 25 mm thick sand cushioning) complete all as specified

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified

KAVYA ENTERPRISES (BID ID -3157308)