Renovation work of existing Green-houses Chamber at ICAR-CRRI Cuttack

Amount

Renovation work of existing Green-houses Chamber” at ICAR-NRRI Cuttack

The transgenic green house of size 32’ x 25’x13’:10’ (LxWxH c:s) with four chamber size of 12.5’x12.5’and corridor size of 25’ x6’ requires the renovation of HMI Control Panel for 4 Chamber Control which has Control system which can monitor and Temperature, Humidity, and light, it maintains chamber climate by optimum controlling of chamber equipment’s like cooling fan, heaters, ventilation, internal screen lights etc. It is also including switching system for operating chamber equipment with suitable relays, contractors, and safety devices. The specific conditions and requirements for this renovation of HMI control panel is as follows, • 7”/10” HMI with Feather buttons, Data logging Feature, PLC system with inbuilt analog module for sensor connection, Multi- Set point programming, Multistage cooling /heating control • Sensor for Temperature & RH: Range: Range 0-50 °C and 0- 100%., Type: 4- 20 mA, Sensor for Light Sensor: Range: 0- 20 KLUX, Type: 4-20 mA. OUTPUTS: • Light Control: Control Cycle: ON/ OFF, multiple stages, Accuracy: ±10 sec/day, Temperature controller: Cooling Control: • Control type: PID, Multiple stage control, Temp. Range: 0.1 to 59.9°C., Accuracy: ±1°C., Hysteresis: 0.4°C Heaters Control: • Control Type: ON/OFF, Multiple stages, Temp. Range: 0.1 to 59.9°C., Hysteresis: 0.4°C Humidity Control • Control type: ON/OFF, Range: 50% to 90%. (Real RH: ±2%. ±1 digit (at 45%). Temperature Range: Temperature range of 25ºC to 40 ºC ± 1ºC.

a. The Lighting system also requires renovation with 8 Light (2 Light Each Chamber) 250-watt LED Light source with following specifications, • Light Source : LED • Spectrum : Full Spectrum • Measured PPF : 545 μmol/s • Input Power : 386W • LED Efficacy : 2.8umol/J • Input Voltage : 100-220V AC • Fixture Dimensions : 615 X 180 X 80 (L x B x H) • Recommended Height : 18" above Grow Bed • Thermal Design : Passive • Dimming : 1-10V • Light Spread : 120*/45* • Expected Lifetime : L90>50,000Hrs • Power Factor :>0.9 b. The corridor also requires the LED 20-watt Light for corridor

Cooling System for 4 Chamber: a. Air conditioner units will be provided, which are responsible to maintain the required temperature range 25ºC to 40ºC ± 1ºC (2-ton AC - qty 8)2 AC for Each 4 Chamber b. 2 Tonn AC Repairing qty 4

Cladding a. Complete Cladding Change of Existing Structure size 32’ x25’ 6mm Polycarbonate Sheet PC sheet. Aluminum Section, Plate Rubber with other fitting accessories, change for chamber. b. External Shading: Green shading net change for roof fix. c. False Ceiling for 4 Chamber (Each Chamber size 12.5’ x12.5’): False ceiling on roof Existing frame work, made of Anodized/ powder coated Aluminum T/Angle sections suspended from roof structure. d. Gutter: 25’ Long, 248mm wide and 1.5mm thick molding hot galvanized steel plate with fitting accessories qty 2set

Ultra fogging system qty 4 (1 set each chamber) Ultra Fogging system by micro-Fogger 15 microns Ultrafine fogging system with SS nozzles, hi - pressure pump, screen filter, polymer water tank and accessories. RO System for micro fogging & ultra-fogging

Door &Ventilation a. Door Repairing. Qty 7(4 Sliding door & 3 Openable door) b. Ventilation: Sliding Window type ventilation size 2’x2’ (HxW) made By PC (Polycarbonate sheet) sheet with sliding c. Painting: Wall Painting work for existing wall

Heater 2.4 kw (1 Heater for Each Control Chamber) Electric heat blower system 2.4 KW. Complete uniform heat circulation system has been given in this heat, so that the heat can be blown in the complete area. Qty-4

Electric wiring for entire facility: All wires will be of copper and desired load and switches (Anchor/Hovels) imported make, extra switches also provided as standby, each feature has own electric line MCB (Anchor/Hovels) and will be under ground in PVC pipe complete set with A grade work. complete set.

Saveer Biotech Limited (BID ID -3182103)