Construction of Anganwadi Centre at Stakna.

Amount

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil :

Dumping of Stone Including Cost of stone

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

column pillars piers abutment.

suspended floor roofs landings

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo- Mechanically treated bars.)

Providing and laying stabilized mud block wall having two leaves interlocked with ties at 900mm Horizontally and 450 mm Vertically, leaving air cavity of 3" between two wall leaves.

CEMENT PLASTER (IN FINE SAND) 15mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Supplying, fitting and fixing 8mm thick Laminated wooden Flooring Work with plank size not Iess than 1200 mm X 190 mm (with tongue-groove locking arrangement) having 0.2mm thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) over a 2 mm thk underlayer polyurethene foam on polythene sheet 250 micron, over a smooth, flat, hard subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction & satisfaction of Engineer in charge. Cost of Laminate Floor Accessories only (Skirting ,End edge, T- moulding,Reducer) shall have to be added separately, wherever required

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) .Dark shade using ordinary cement.

Providing wood work in frames of doors, (Double Glazed) windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood

Providing and fixing panelled or panelled and glazed shutters(Double Glazed) for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). 35mm Second Class Kail Wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood

5 mm thick glass pane (weighing not less than 12 kg/sqm) (Double Glazed).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete :

Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineerin?charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. (For Bathroom & Kitchen- Including Both Hot and Cold Supply from tank and Solar Water Heater Respectively) PN-16 pipe , 25mm OD(SDR-7.4

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge.Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 32mm OD(SDR-7.4

Providing and fixing PPR Unions PPR Union 32mm

PPR Union 25mm

Providing and fixing water closet squatting pan (indian type W.C. pan) with 10 LITRE PVC CISTERN cistern with fittings,C.I./M.S. brackets 40 mm diameter flush bend with fittings and clamps,overflow arrangement with speicals and mosquito proof coupling of aproved municipal design complete including painting of fittings and brackets,cutting and making good the wall and floors wherevere required

Providing and fixing wash basin with CI MS bracket, 15mm CP brass pillar taps , 32mm CP brass waste of standard pattern incl. paintings of fittings and brackets cutting and making good the walls wherever req. White viterous china wash basin size 600x480mm with single 15mm CP brass pillar taps

Kitchen sink with drain board Size 510 x 1040 bowl depth 178 mm

Providing and fixing mirrior of superior glass (of approved quality) and of req. shape and size with plastic moduleframe of approved make and shade with 6mm thick hard board backing. Rectangular shape 1500x450 mm

Providing and fixing PTMT soap Dish Holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms

Providing and fixing toilet paper holder CP brass

Providing and fixing PVC soil waste and vent pipes. 100mm dia

Providing and fixing PVC soil waste and vent pipes.75mm dia

Providing and fixing plain bend of req degree 100mm dia

Providing and fixing plain bend of req degree 75mm dia

Providing and fixing double equal junction of req. degree access door with fiting complete job. PVC 100mm dia

Providing and fixing double equal junction of req. degree access door with fiting complete job. PVC 75mm dia

Providing and fixing PVC collar of req dia complete job 100mm dia

Providing and fixing PVC collar of req dia complete job 75mm dia

Providing and fixing PVC waste pipe for sink or wash basin incl. PVC waste fittings complete Flexible pipe 32mm dia

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing gyeser of req. capacity incl. fixing with all fixture complete job.25ltr

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tan

Gtae Valve- 32mm

Tank Nipple

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone

Wooden Shingstak - plain design

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Carriage of material by MT from source to site of work, incl. loading, unloading complete job. Cement & Steel--------30KM

Sand--------10KM

Stone Agg--------10KM

Stone -------6KM

M/S MOHD HUSSAIN

M/S ANGCHOK MATHO CONSTRUCTION

M/S STANZIN YOULOW

TASHI TSERING