SPECIAL REPAIRS OF BLDG NO.P-331, ORs MD ACCN AT BANA SINGH ENCLAVE AND SPL REPAIR TO BLDG NO.P-480 OF 227 FD WKSP COY EME UNDER AGE B/R-II AND AGE E/M OF GE (SOUTH) DELHI CANTT-10

Amount

Roughening surfaces of old concrete floor/wall by picking, sweeping clean and washing down with water to remove dust, etc and brushing and applying neat cement slurry with 3.0 Kg of cement per sq metre complete all as specified and as directed.

M&L for light shade ceramic tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, as in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for light shade ceramic tiles 8 to 9 mm thick (square/rectangular) polished, area of each tile not exceeding 0.36 sqm, as in skirting etc. laid over and including 10mm thick cement plaster in CM 1:4 as in bedding layer set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for joint free glazed ceramic coloured tiles of size 450x300x7mm thick in vertical surface laid over and incuding as in bedding layer set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Dismantling stone slabs and tiles of any discription or thickness in floors, aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for granite (of any type) work, 20 mm thick (table rubbed and polished) in steps,jambs,pillars, window-cills, cooking platforms and like laid over and including 20mm thick screed bed cement screed bed in CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for machine cut pre-polished kota stone slab flooring 18-20mm thick laid over and includng 20mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

M&L for pre-polished kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid over and including 20mm thick cement cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Demolition of reinforcement cement concrete of any discription and in any position, including cutting of reinforcement from adjoining RCC component to faciliate demolition complete all as specified and as directed. Note - All scaffolding & T&P up to three/four storey building required for demolition/dismantling of RCC shall be part of this item .

M&L for brick work with sub class `B' bricks straight or curved on plan exc. 6mtr mean radius built in cement mortor 1:6 complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks strainght or curved on plan to any radius in half thick in CM 1:4 brick wall built in cement mortor complete all as specified and as directed.

Taking up or down steel tubing and connections, 15 mm bore of pipe complete all as specified and as directed.

All as per Srl item No.14 above, but 20 mm bore of pipe complete all as specified and as directed.

S&F 15 mm bore GI tubes, medium grade galvanised, with all fittings and fixed complete to walls and ceilings or laid floors or concealed complete all as specified and as directed.

All as per Srl item No.16 above, but 20 mm bore of pipe complete all as specified and as directed.

Cutting chases or making holes, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and as directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F ball brass valves, high pressure, with of PTMT with epoxy coated aluminium rod & high desity plastic ball ascrewed for iron pipe of 20mm bore and fixed complete all as specified and as directed.

S&F in repairs gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20 mm bore complete all as specified and as directed.

S&F PVC connections 450mm long with brass unions at both ends suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs 15 mm angle valve/ stop valves, cast copper alloy , chromium palted, fancy type screwed down high pressure with crutch and butter fly handles , screwed with iron pipes or for union complete all as specified and as directed.

S&F in repairs bib tap (quarter turn), brass chromium plated fancy type, long body with flange screwed down, screwed for iron pipe 15 mm bore complete all as specified and as directed.

S&F in repairs mixing valve 15 mm dia, CP brass fancy including joints to steel pipe or unions for centre hole wash hand basin, including fittings complete all as specified and as directed.

S&F in repairs chromium plated grating with 100mm dia of approved make includingh fixing with 1:4 CM to floor/ nahni trap etc. complete all as specified and as directed.

S&F in repairs grating doom 125mm dia with waste hole of PTMT (minimum weight 40 gms) etc. complete all as specified and as directed.

S&F in repairs brass chromium plated overhead shower rose 125mm dia, with revolving joint and shower rod to fixed to 15mm bore pipe complete all as specified and as directed.

S&F brass chromium plated tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass CP complete all as specified and as directed.

S&F in repairs stainless steel sinks without drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including necessary screed bedding in cement mortar(1:4) on to dwarf wall or including fixing cantilever brackets as per site requirement and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F brass chromium plated health faucet alongwith 1.00 to 1.50 meter SS flexible connection pipe suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white fixed in repair,including sheet cover of closed pattern with flat bottom and mild steel chromium plated or aluminiumised hinging device complete all as specified and as directed.

S&F in repairs, PVC valveless , syphonic action type flushing cisterns 10 ltrs capacity , low level , white, with inlet ball valves , float and handle including brackets and pvc flush pipe 32 mm dia for low level complete all as specified and as directed.

S&F in repairs vitreous china wash basin, white, flat back, size 550 x 400mm, including necessary waste pipe and coupling, brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

All as per Srl item No.37 above, but exceeding 1.50 sqm and not exc. 4.00 sqm each complete all as specified and as directed.

Taking down shutter of any descreption exc. 1.00 sqm but not exc. 2.00 sqm each complete all as specified and as directed.

All as per Srl item No.39 above, but n.exc 1.00 Sqm each complete.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed.

S&F factory made solid PVC chowkhat/ door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet and edges will be painted to match with printed PVC sheet reinforced with 19 mm x 19mm MS square tube of 19 gauge including rubber gasket, PVC fastners, screws, brackets, and shown on drawing as per SSR part-II (2020) complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain printed moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S&F 35 mm thick Factory made IInd class hardwood plain,framed paneled shutters (any numbe of panels) with lock rail and panel of 9mm BWP commercial ply with commercial veneering on both faces size of rail and stile as per IS-1003 (part) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35 mm thick factory made IInd class hard wood glazed and Skelton shutters (three panels) open rebated and prepared to receive glass/ gauge etc. divided into squares edges of framing plain, chamfered or rounded mitered and rebated sash bar any number with cut or mitered beads for securing glass/ gauge etc. size of members of shutters complete all as specified and as directed.

S&F stainless steel butt hinges, size 100 mm complete complete all as specified and as directed.

S&F stainless steel barrel tower bolts, 150 mm long complete all as specified and as directed.

S&F stainless steel handles, 150 mm long complete all as specified and as directed.

S&F stainless steel sliding door bolts 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cms width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

M&L for powder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness (section no. 20831 of JINDAL) and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick (section no. 20737 of JINDAL) section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperature 1.4mm and fixed with steel wire stapples 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified and as directed.

S&F fabricated aluminum window with powder coated anodized aluminum frame of section 63.5mm x 38.10mm x1.5mm thick, shutter with section 47.62mm x 44.45mm x 1.5mm thick including aluminum anodized “D “ handle, hinges, peg stays, tower bolts, etc including jointing cleats for fixing builder's hardware fittings & stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples including necessary fittings/fixture /aluminum snap beads complete all as specified and as directed. Notes for Srl item Nos.52 to 54:- 1. Measurement shall be taken clear opening ie out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. 2. The rate quoted by the tenderer are deemed to be included all fitting, fixture, glass pane, GI wire etc. complete and noting extra shall be paid in this account.

M&L for preparation of new steel surfaces of any description not otherwise described over 10 cms width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed.

M&L for 18mm thick wood plastic composites (WPC) board, fixed with screws as in cupboard/ wardrobe/ almirah shutter including all necessary fittings and fixtures like nickle plated clip hinges, knobs etc. complete all as specified and as directed. Notes:- (a) Pattern & design of WPC board to be decided by GE. (b) Items like cupboard knobs, and CP plate clip hinges deemed to be included in the quoted rate.

S&F in repairs drapery curtain rods, stainless steel 25 mm dia of approved quality with decorative wooden finish and two number brackets fixed in brick/concrete wall and same finished knobs on each end of curtain rod including 8 Nos (min) match up rings etc. complete all as specified and as directed.

Dismantling wrought iron or mild steel/ cast iron work of any description complete all as specified and as directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, welded or forged into spikes, framed guard bars, window frames, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work fixed in position including holdfasts or screws confirming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.63mm nominal dia or wire and sqm average width or aperature 1.40mm, fixed with tinned tacks or galvanised wire staples to doors/steel windows complete all as specified and as directed.

M&L for welding in repairs exc 2.5 cm but not exc. 5.0 cm in length thickness of metal be welded exc 6mm but n.exc 9mm complete all as specified and as directed.

S&F MS stainless steel peg set of five fixing with wall complete all as specified and as directed.

S&F in repairs kitchen plate rack with four shelves made out of stainless steel sheet 1 mm thick overall size 750mm x 750mm x 250mm complete all as specified and as directed.

S&F in repairs stainless steel barrel tower bolts, 150 mm long complete all as specified and as directed.

S&F in repairs stainless steel handles, 150 mm long complete all as specified and as directed.

S&F in repairs stainless steel sliding door bolts 250mm long with hasp, staple (bolt type) fixing clips of sheet cast, fixing bolts complete all as specified and as directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, concrete surface etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering with ready mix plaster on faces of brick or concrete surface, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 10mm thick rendering with ready mix plaster on concrete surfaces of ceiling, chajja,etc finished even and smooth complete all as specified and as directed. Notes for Srl item Nos.71 & 72 :- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast / Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE) 2. The readymix plaster shall be procured directly from the manufacturer or their authorised dealer.

M&L for preparation of newly plastered surfaces of wall and applying 1 to 2 mm thick wall care putty on whole surfaces to achieve smooth, even and uniform surface including grinding with sand paper and levelling of surface and applying two coat of oil bound distemper on white or tinted over existing prepared putty base surface complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of walls and applying two coat of cement based paint over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plasered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed.

M&L for complete removal of existing treatment from internal surfaces of wall by electrically operated grinder, washing and filling of holes with filler material and applying 1 to 2 mm thick wall care putty in two layers on whole wall surface including grinding with sand paper and levelling the surface and than applying two coat of oil bound distemper on white or tinted surface over existing prepared putty based surface complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying two coats of white wash complete all as specified and as directed.

M&L for preparation of old surface of ceiling and applying one coats of white wash complete all as specified and as directed.

Cutting of vegetable plant (girth not exceeding 300mm) from roof, terrace, chajjas etc digging out the roots and making good the surface in PCC 1:2:4, type B-1 with surfaces finished to match complete including scaffolding etc. complete all as specified and as directed.

Dismantling of brick tiles (laid flat or on edge) on roof surface.laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of mud in roof, any thickness, including plastering and leeping upto two storey bldg including necessary scaffolding arrangement complete (whether full thickness removed or only a part there of) and removing rubbish from cantonment area or complete all as specified and as directed.

M&L for cutting out craks to V-section in existing roof or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

M&L for Cement concrete 1:2:4, type B-0, using 12.5mm graded stone aggregate avg 50 mm thick as in roof pedding, finished even and smooth without using extra cement, including 10 mm thik plaster on top concrete surface up to three stories bldgs complete all as specified and as directed.

M&L for Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:-

(a) Applying oil bound bituminous primer at the rate of 0.30 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated.

(b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 30/40 confirming to IS-73 (Grade S-35).

(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, (weight not less than 160 gm/Sqm) with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface.

(d) Preperation of surfaces and applying two coats of aluminium paint on top of roof surfaces.

Make of APP: "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE.

Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectiveness of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or in lieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.

M&L for cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate in roof kerbs or mud stop rounded or chamfered on edge etc. complete all as specified and as directed.

Demolition of cement concrete in floors of any description and in any postion complete all as specified and as directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and as directed.

S&F 110 mm dia UPVC pipes Type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and as directed.

S&F 75 mm dia UPVC pipes Type 'B', single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and as directed.

S&F 75mm UPVC (SWR) bends type ‘B’ (any radius) complete all as specified and as directed.

S&F 100mm UPVC (SWR) bends type ‘B’ (any radius) complete all as specified and as directed.

S&F in repairs UPVC ‘P’ or ‘S’ trap including jointing with solvent cement, dia of outlet 100mm complete all as specified and as directed.

S&F 75mm UPVC (SWR) branch piece, single (single Y) equal or unequal provided with oval access doors complete all as specified and as directed.

S&F in repairs UPVC floor/ nahani trap including jointing with solvent cement, dia of outlet 75mm complete all as specified and as directed.

S&F in repairs 125mm x 100mm salt glazed stone ware gully traps square & round mouthered trap 'P' including case iron grating and fixed, including necessary excavation and earthwork, concrete in bed, surrounds, kerbs etc., and jointing to drains in CM 1:1 complete all as specified and as directed.

Taking down rain water pipe (any size) or pattern incl all fittings, head shoes, bends swan necks etc incl cleaning or re-fixing or removal to store(measured overall as fixed along the centre line over fittings and accessories complete all as specified and as directed.

S&F 110 mm UPVC pipes Type 'A', single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to walls complete all as specified and as directed.

S&F 110mm UPVC (SWR) Bends/Tee type ‘A’ (any radius) complete all as specified and as directed.

S&F holder bat clamps 100mm bore out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

All as per Srl item No.99 above, but 75mm bore complete all as specified and as directed.

Demolition of cement concrete (un reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for cement concrete 1:3:6, type C-2, using 40mm graded stone aggregate in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed.

M&L for 60mm thickness machine pressed pre-cast concrete interlocking paver block any size and shape confirming to IS 15658-2006, M-30 grade with grey cement and no pigment, laid over and including 40mm thick sand cushion and including joints filled with sand complete all as specified and as directed.

M&L for udaipur green marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 20mm thick screed bed in cement mortar (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed.

S&F 100mm UPVC (SWR) branch piece, single (single Y) equal or unequal provided with oval access doors complete all as specified and as directed.

M&L for providing and injecting chemical chlorpyrifos emulsifiable for post constructional anti termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes complete all as specified and as directed.

M&L for anti termite treatment of soil under existing floors using chemical chlorpyrifog emulsifiable concentrate @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar (1:2) to match the existing floors complete all as specified and as directed.

S&F 6mm thick glass corner shelf fancy type with railing and fittings complete of size 25cmx25cm of best quality (as per sample approved by Engr-in-charge) complete all as specified and as directed.

S&F brass chromium plated soap dish 150mmx150mm, of any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

M&L for 15mm thick rendering with ready mix plaster on brick or concrete surfaces finished even and smooth without using extra cement mixed with by adding permeability reducing polymer @ 250gm/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturer's recommendations including all levelling the surface, curing etc. complete all as specified and as directed. Note:- water proofing compound to be measured separately.

M&L for preparation of new plastered wall surfaces and applying two coats of distemper oil emulssion, white or tinted over one coat of primer complete all as specified and as directed.

M&L for providing and applying a bond coat of Latex: Water : cement - 1:4:6 with latex consumption @100gm/sqm on the brick wall surface by brush as per manufacturer's recommendations including curing complete all as specified and as directed.

M&L for chipping of spelled and loose concrete and cleaning rust from reinforcement by sand blasting, scrubbing down concrete surfaces with wire brushes cleaning with water allowed to dry applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of a layer of epoxy adhesive on complete exposed surfaces of concrete and provide gunniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1:2 with OPC 43 grade cement mixed with polycrete admixture @ 2% by weight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs, chajjas, fins, facias, parapets, columns and beams etc complete including necessary scaffolding, shuttering necessary chased to brick work or RCC members at any height upto full height of buildings including removing of small trees shrubs etc. complete all as specified and as directed. Note:- Steel mesh to be welded with the existing reinforcement. The cost of welded mesh is deemed to be included in the unit rate quoted.)

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins , arches , pillars, etc. of any description complete all as specified and as directed.

M&L for brick work with sub class 'B' Bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 as in manholes/drain etc. complete all as specified and as directed.

M&L for complete removal of existing treatment on walls by electrical grinder/ sand paper/ steel patti thereafter prepartion of walls by filling of holes and cracks with wall care putty, specified for external surface as required area of surface and applying two coats of Cement base paint complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint comp complete all as specified and as directed.

M&L for preparation of old Steel surfaces of any description not otherwise described over 10 cms width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners 12.5mm dia. 40mm long and including Powder coated anodised aluminium snap grid frame size 605 x 605 mm and 2-3 mm thick for false ceiling complete all as specified and as directed.

S&F acoustic gypsum perforated board 12 mm thick of size 600x600 mm fixed in ceiling or laid/ inserted to Aluminium snap grid complete all as specified and as directed.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and complete all as specified and as directed.

S&F in repairs Steel window with side hung shutters incl projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded with one shop coat of red oxide primer, and two coat of synthetic enamel paint complete all as specified and as directed.

S&F in repairs for Steel window or ventilator fixed type with glazing bars complete all as specified and as directed.

S&F roller blind curtain/ Canvas including all aceesories required to make it functional complete all as specified and as directed.

M&L for Vitrified Ceramic tiles double charged (light shade), 10 mm thick (square/Rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and as directed.

M&L for vitrified ceramic tiles double charged (light shade) 10 mm thick (Square/Rectangular) area of each tile not exceeding 0.36 sqm as in skirting laid over and including 10mm thick cement plaster in CM (1:4), set and jointed in neat cement slurry at the rate of 3 kg per sqm and pointed in white/coloured cement to match the shade of tiles complete all as specified and as directed.

S&F 18/19mm thick Wood plastic composite (WPC) board solid in cupboard with shelf and shutter full size fitted under or above including all necessary fittings and fixtures like nickle plated clip hinges, knobs, channels etc. complete all as specified and as directed. Note : The rate quoted by the tenderer are inclusive of necessary fitting/fixtures like cup board, knob etc.

Supply, fabricating and fixing aluminium door powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each) and two aluminium tower bolts of 200mm size for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces complete all as specified and as directed. Notes:- (a) Measurement shall be taken for clear opening i.e. out to out of door frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be incl in the above quoted rates and no extra shall be paid.

Taking down carefully the old U/S Copper point wiring (light, fan, socket or power) complete Fitting such as switch, ceiling roses, pendants, socket, regulators, all type light Fitting, security light Ding Dong Bell etc. and making good disturbed surfaces of walls including necessary touch up with the adjoining surface of disturbed area i.e. with OBD/colour wash/white wash as the existing finish complete all as specified and as directed.

M&L for point wiring complete with single core multi strand copper conductor 1.5 Sqm nominal area PVC insulated FRLS 1100 Volts grade electrical cable in and including concealed PVC conduit medium grade and Modular sunken pressed steel terminal box 2 mm thick required size including modular plate and modular flush box in different module with all accessories including 1.5 Sqm single core with multi strand copper conductor PVC unsheathed cable earth and connected to earth dolly complete all as specified and as directed. Note :- The rate is inclusive cutting/chasing and making good disturbed surface with CM 1:3 and same surface finishs with the adjoining surface of disturbed area with OBD/Colour wash/white wash etc. complete. One light /fan/Bell point/security light controlled by one way switch

All as per Srl item No.134 above, but one socket outlet 5 Amps on same board with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing.

All as per Srl item No.134 above, but one socket outlet 5 Amps on independent board with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing.

All as per Srl item No.134 above, but one socket outlet 15 Amps on independent board with cables 2.5 Sqmm size for phase and neutral and 2.5 Sqmm for earthing.

All as per Srl item No.134 above, but one AC point on independent board with cables 4 Sqmm size for phase and neutral and 4 Sqmm for earthing.

All as per Srl item No.134 above, but one light point controlled by two 2-way switch 230 volts with cables 1.5 Sqmm size for phase and neutral and 1.5 Sqmm for earthing.

S&F Switch Modular type switch, 6 Amp, 1-way SP switch with finger proof terminal complete all as specified and as directed.

S&F modular type 2/3 pin combined shuttered type 6A socket complete all as specified and as directed.

S&F Switch Modular type switch, 6 Amp, 2-way SP switch with finger proof terminal complete all as specified and as directed.

S&F Switch Modular type switch, 16 Amp, 1-way SP switch with finger proof terminal complete all as specified and as directed.

S&F modular type 2/3 pin combined shuttered type 16 A socket complete all as specified and as directed.

S&F AC modular box with mcb 20 Amps complete all as specified and as directed.

S&F ceiling rose complete all as specified and as directed.

S&F electric bell ding dong AC, 230 volts single phase complete all as specified and as directed.

S&F Bell push modular type 1M 5/6 Amp complete all as specified and as directed.

S&F in repairs surface mounting LED Integrated Aluminum Batten luminaries Polycarbonate co-extrusion tube for Not less than 18 Watt LED light housing. Fixture should have minimum system lumen of 2000lm & minimum efficiency at system level >=115lumens/Watt, life of fixture 50K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240V AC An operating voltage Range of 140-270V including all connection up to ceiling rose complete all as specified and as directed.

S&F in repairs surface mounting LED Integrated Aluminum Batten luminaries Polycarbonate co-extrusion tube for Not less than 09 Watt LED light housing. Fixture should have minimum system lumen of 1000 lm& minimum efficiency at system level >=115lumens/Watt, life of fixture 50K Hrs, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240 V AC. An operating voltage Range of 140-270V including all connection up to ceiling rose complete all as specified and as directed.

S&F in repairs not less than 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and as directed.

S&F in repairs inverter LED lamp 12 Watt rechargeable for home, cool daylight, Base complete all as specified and as directed.

S&F in repairs round shape 12 watt 220 volts AC surface type with 1100 lumen output, efficiency not less than 100 lumen/watt, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and as directed.

S&F in repairs decorative wall light mounting suitable for LED Lamp upto 15 Watt complete all as specified and as directed.

S&F in repairs 45 Watt security light high efficiency long life LED module with LENS type LED package mounted on MCPCB, Fixture should have minimum efficiency at system level >=110 lumens/Watt, integral SMPS based constant current electronic LED driver with THD<10% surge voltage protection of > 5.0 KV, CRI>80, PF>0.95,CCT 4000-6500K and other safety tests as per IS:15885( part-2/sec-13),IP 66 protection high efficiency polycarbonate cover with integrated lens housed in pressure die cast aluminim alloy heat sink for effective thermal management strudiness excellent corrosion resistance separate optical and control gear compartment & Top opening for easy maintanance suitable for side entry wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible copper cunductor cable of appropriate size and 1.5m long bracket having 40mm diameter light grade GI pipe including GI clamp nuts bolts & washers with two coats of synthetic enemal paint over a coat of oxide primer complete all as specified and as directed.

S&F in repairs recessed/surface mounting 36 watt 2' x 2' flat LED panel fitting with soft light and glare free symetrical ilumination suitable for RCC/POP ceiling supplied with wedge bracket to fix in existing ceiling in replacement of existing old unsv CFL fitting any type from ceiling of common areas and making good disturbed surface/POP ceiling to match and getting electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and as directed.

M&L for opening of hole through out the wall as suitable for exhaust fan of size 300mm sweep and fixing of nut-bolts with 4" anchor fastner of suitable size and making food the disturbed surface and all as per site requirement complete all as specified and as directed. Note : The rates are inclusive for hole opening civil work, MS fastener bolt of 8mm dia and 100mm (minimum) long for fixing of exhaust fan and MS fastner clamps strip 38 mm wide and 5mm thick (min) to hold exhaust fan.

S&F Exhaust fan 300 mm sweep, 900 RPM, metallic body including metalic blade, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 1.5 sqmm for connection from ceiling rose to fan including taking down and to be deposit in AGE E/M Store complete all as specified and as directed.

S&F in repairs Wall mounted fan 400 mm sweep single phase with remote control all acessories complete all as specified and as directed. Note:- Old unsv wall mounting fan to be deposited in AGE E/M store yard.

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with remote control, Brush Less Direct Current (BLDC) Motor, Class of insulation : B, 3 Nos Blade, 30 cm long down road, 2 Nos canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 220 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%, with electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise=75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and as directed including taking down old ceiling fan and depositing to MES store yard.

S&F in repairs of VTPN DB 4 Way double door vertical type for fixing MCCB 4 pole up to 250 Amps as incomer and MCBs as outgoing with metal door and IP-43 protections and connecting complete all as specified and as directed.

S&F in repairs of MCCB thermal magnetic electric release, fixed type, 4 pole, 100 Amps, 415 Volts with repeturing capacity 25 KA including electrical connection with incomer with appropriate size of aluminium lugs and insulation packing complete all as specified and as directed.

S&F in repairs SPN 12 Way double door mettalic DB conforming to IEC 61439-3 suitable for flush/surface mounting having 100 A copper busbar fully shrouded neutral bar earth bar wire set & cable ties for cable management pre fiited sheet etc. Having IK 09 & IP 43 protection complete all as specified and as directed.

M&L in repairs MCB SPN 'B' curve 63 Amps 240 Volts, 10 KA complete all as specified and as directed.

M&L in repairs MCB SP 'B' curve 06 to 32 Amps 240 Volts 10 KA complete all as specified and as directed.

M&L in repairs MCB SP 'B' curve 63 Amps 240 Volts 10 KA complete all as specified and as directed.

S&F in repairs for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC 1:2:4, type B-1, Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick 1:2:4, type B-1, using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI Pipe light grade for watering complete all as shown in drg and connected to earth test point including testing complete all as specified and as directed.

M&L for Earth continuity conductor or main earthing lead fixed on wall/ceiling in batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and as directed.

S&F water storage heater, 5 star, Glass lined enamel coated incoloy heating element, Digital temperature display, Feather touch buttons, Shock resistant injection moulded ABS body, IPX4 waterproof technology, Tank design is suitable to withstand 8 bar pressure (Geyser) of capacity 25 litre, AC, electric, 230 volt, complete, 3 core lead, including PRCD Plug top, safety valve, including electric and water connection and making good to disturbed surface including taking down existing water storage heater complete all as specified and as directed. Note : Existing geyser to be taken down from wall and deposit to the AGE E/M store Yard.

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm, 450/1100 Volts grade on & including PVC Conduit 25 mm medium grade complete with conduit accessories and copper cable 6 sqmm continuous earth wire complete all as specified and as directed. (Two runs of cable with 01 earth wire shall be measured as one length) Note:- The rate is inclusive of taking down old submain wiring, making good the disturbed surface and same surface finished with the adjoining surface of disturbed area ie with OBD/colour wash/white wash etc. and wall care putty where ever required.

Taking down and re-fixing single phase static energy meter in meter box in and including its connection complete and mounting on existing wall surface including necessary connections of incoming and out going cables complete all as specified and as directed.

S&F in repairs Sheet metal enclosure of size 350 x300 x 150 mm suitable for mounting Single phase electric meter fabricated from 2mm thick CRCA sheet with anti corrosive dust and vermin proof including taking down meter and refix after completion of wiring work including connection with 6 Sqmm wire from DB to Meter. Note:- The meter cover shall have a fully transparent window. The window shall be of transparent, high grade UV stabilized engineering plastic for easy reading of all the displayed values/parameters and observation of operation indicator. The window shall preferably be an integral part of meter cover all as specified and directed.

M&L for excavation of existing LT cable of any size and taking it out from the loop floor/protection pipe and including incomer electrical connection in 4P MCCB of VTPN with suitable size of thimble complete with returning filling and make good of excavated surface / floor complete all as specified and as directed.

S&F in repairs cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core complete all as specified and as directed.

Excavating in trenches n.exc 1.5 mm wise and n.exc 1.5 m in depth for laying under ground cable n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning and filling including spreading, levelling, watering and well ramming inlayers n.exc 25cm thick in hard/dense soil/Soft loose soil complete all as specified and as directed.

Removing excavated material (soil) to a distance n.exc 50 m where directed at a lever not exc 1.5m above the starting point complete all as specified and as directed.

M&L for sand filling under floors or in foundatins includng watering and consolidation/trenches below and around under ground cables for cushioning of calbes etc. complete all as specified and as directed.

Supply and laying in replacement Bricks common burnt clay building bricks 'B' sub class A designation 75, size 230mmx115mmx75mm complete all as specified and as directed.

Supply and laying High density polyethylene(HDPE) pipes of pressure rating 6kgf/sq.cm (IS marked) and laid in trenches/under roads/ in drains/fixed to poles/walls of size 50 mm dia complete all as specified and as directed.

Note :- The contract sum shall be after deducting the amount of credit shown in Sch of Credit of this tender

Chaudhary Constructions

A N BUILDERS

M/S.M.S.Devi.Const.Co

A R construction

verma enterprises

P R Constructions

The new hut furnitures

M/s SAAR ENGINEERS