Electrical Installation Works and Repairing of Mortuary Cooler Plant

Amount

PART-A (E.I WORKS)

S&F 4 Way, 415V, 16-32A per way, Horizontal TPN MCBDB with SS enclosure double-door with IP-42/43 protection with one no 63 Amps Four Pole Isolators as incomer and 12 nos.16-32Amps SPMCBs('C' Curve,10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire andneutral link & provision for earthing attachment. (Make-Legrand/ L&T/ Seimens)

S&F (2+10 way)double-door SPN MCB Distribution Board with IP-42/43 protection, with one no 40 Amps DP Isolators as Incommer and 10 nos. 16-32 Amps SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. (Make-Legrand/ L&T/ Seimens)

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make- Polycab/ Havells/ Finolex) in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Legrand-Arteor/Crabtee-Amare) fixed on Modular GI switch board complete with 2 no. suitable size “Ph & N” copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed}(Average run 8 mtr).

Do..do..do..to 6A 3 pin Modular type plug socket & switch(Legrand-Arteor/Crabtee-Amare) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works.

a) On Board

b) Avg. run 3 mtr.

S & F 240 V, 16 A, 3 pin Modular type plug socket with 16A Modular type switch (Legrand-Arteor/Crabtee-Amare), without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl.S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

S & F Industrial Plug & Socket board with 415 V, 30A, TPN & Earth Metal Industrial Plug socket & 30A Industrial top incl.S&F 32 A TPN/FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection

S&F MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting

S&F 240V, Modular Socket (2 Module) type fan regulator (Step type) (Legrand-Arteor/Crabtee-Amare) on existing Modular GI switch board with top cover plate incl. making necy. connections etc

Supplying and fixing 240 V, 70 Watt, 1200 mm Sweep, 370 RPM ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. (Make-Orient, Model- SUMMER BREEZE, Coloure-White)

S&F of 250 volt, 50 Hz, 300 mm, Sweep 1420 r.p.m. exhaust fan after making hole in wall and making good damages and smooth cement finish etc. and providing necessary length of PVC insulated wire and making connection for exhaust of dia. 12" incl. fixing Al. louver shutter on wall with necessary bolts & nuts.

S&F 240 volt. 4 Ft. Long 18/20 Watt Single LED Tube Light fittings with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) EI conduit, “L” type (125mmx 125mm) 6mm thick and 25mm with MS clamps incl. S & F 3x 1.5 sq mm copper wire of 1.10 Mtr. length. & necessary connection as required. (Make-Philips, Cat No.-TMC 501 P 1xT-LED 22W P3241 & Cat No.- MAS LEDtube 1200mm 18W865 T8 I – 2100lm)

Supplying 240 volt. 9/10 watt LED Lamps. (Make-Philips, Ace Saver)

Supplying and fixing LED bulk head ceiling fitting on wall /ceiling by screws etc. (Make-Philips, Cat No.-WT202W LED6S NW PSU S2 PC)

Supplying and Drawing 1.1 KV single core stranded 'FR PVC insulated & unsheathed single core stranded copper wire (Make- Polycab/ Havells/ Finolex) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required incl. cutting channel of 40 mm x 40 mm/ 43 mm x 43 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works.

i) 2 x 1.5 Sq. mm. + 1 x 1.5 Sq. mm.(through 19 mm dia pipe)

ii) 2 x 4 Sq.mm. + 1 x 2.5 Sq.mm.(through 19 mm dia pipe)

iii) 2 x 6 Sq. mm. + 1 x 4 Sq. mm.(through 19 mm dia pipe)

iv) 4 x 6 Sq.mm. + 2 x 4 Sq.mm.(through 2 nos 19 mm dia pipe)

v) 4 x 16 Sq. mm. + 2 x 10 Sq. mm.(through 2 nos 25 mm dia pipe)

Supplying & Laying of 2 core 6 sq mm Al. armoured XLPE cable (Make- Polycab/Havells/Finolex) after cutting floor/pavement/ wall/ and making holes incl., embedding the cable at an average depth of 75 mm as below and mending good the damages to original finish incl.removing the rubbish.

Supplying and fixing following size compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables.

i) 4 core 25 sqmm.

ii) 2 core 6 sq.mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.

i) 4 core 25 sqmm.

ii) 2 core 6 sq.mm

Supplying & fixing following size medium gauge GI Pipe (TATA ISI-Medium)Protection with necessary fittings and jointing metarials as required.

i) 25 mm dia.

S & F 415V,TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make- L&T/Legrand/Siemens)

Supply & erection of 2 Mtr. long 80 mm dia G.I. pipe pole (ISI - Medium) with pole cap & base plate in C.C. (6:3:1) foundation of dimension 600 x 600 x 750 mm having on the roof of the building after chiping of the roof incl. 3 mm thick net cemented finish and providing G.I. earth bolt after making drilled hole etc. on pole incl. two coats of aluminum paint over one coat of RO primer as per G.S.

S & F single bracket type arm fabricated header with 100mm dia G.I. pipe of 10" length welded with 1.5 m long 40mm dia. G.I. pipe at an angle of 15 deg with horizontal plane incl. S / F nuts, bolts washer, etc incl. two coats of aluminum paint over one coat of RO primer as per G.S.

S &F 200 x 150 x 100mm CI water proof looping cable box having hinged CI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. wherenecy. incl. painting

S&F of 240 volt automatic timer box with suitable size copper wire internal wiring & necessary connection & consisting of followings item(Make L&T)

i) 6 Way SPN MCB DB (L&T, Cat. No.-DBSPN006SD)

ii) Digital time switch (L&T, Cat. No.-AUTS02DIG00)

iii) 40 A DP Power Contactor (L&T MU-2P Contactor, Cat No.-CS90118NOOO)

iv) 40A DP MCB Isolator (L&T, Cat. No.-BF204000)

v) 25 A DP MCB Changeover switch for by passing the Timer Control (L&T, Cat No.-AUC00202500)

vi) Indicating lamp Red 415V (L&T, Cat. No.-CS94810DOOO)

vii) Inter connection by suitable size copper conductor (Havells/ Finolex/ Polycab)

S & F 240 Volt, 30 watt, LED street light fittings complete with all accessories. (Make- Crompton Greaves, Cat No.- LSTS-30-CDL)

S & F 240 Volt, 60 watt, LED street light fittings complete with all accessories. (Make- Crompton Greaves, Cat No.- LSTP-60-CDL)

Earthing with 50 mm dia GI pipe(I.S.I-M) 3.64 mm thick x 3.04 Mts.long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S &F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

PART-B (repairing of Mortuary Cooler Plant)

S & Installation of 415V, 3 phase 5HP 1440 RPM 50C/S floor mounted induction Motor (Make : Crompton Greaves / Becon / Kirloskar) necessary motor pulley & key mounted on CC base foundation fabricated MS channel structure made of 50 mm x 100mm x 50mm x 6mm thick and nut, bolt, washer, with epoxy painting etc. including civil work as required as per direction of E.I.C.

S & F of 250 volt, 50 Hz, Sweep 1420 r.p.m. following sizes exhaust fan after making a iron structure and fixing on iron structure etc. and providing necessary length of PVC insulated wire and making connection for exhaust of following dia. incl. supply & fixing AL louver shutter on wall with necessary bolts & nuts etc as per GS.

(i) 15''(inch.).

(ii) 18''(inch).

Providing 6 mm thick reinforced wired glass sheet laid of the floor and 3 sides wall inside the chamber. (Approx- 72 Sq. Ft.)

Insulating 6 body mortuary chamber of size 9 ft. X 8 ft x 5 ft (L x W x H) by 4 inch thick high density thermocol duly pasted with bitumen on 05 sides including s & f necessary wooden frame work finally finished with ½ inch thick sand, cement plastering with wire net duly fixed with nuts, bolts, washers, ‘U’ hooks etc. as per direction of EIC.

S & F of door frame at the back of the mortuary chamber attached to plant room made of 5" x 4" Sal wood for fixing the new doors in proper position as per direction of EIC.

S & F of 1 sets door frame at the front of the 6 body mortuary chamber made of 5" x 4" Sal wood for fixing the new doors in proper position as per direction of EIC.

S & F of 4 inch thick good quality insulated back side door provided in the back of the mortuary chamber attached to plant room, made of sal wood and water proof ply wood with gasket and also providing thermo call insulation covered with 22 SWG GI sheet as per direction of E.I.C.

Cost of inter locking system from panel board to all refrigerant system such as solenoid valve, H.P. & L.P. switch thermostat switch compressor motor etc. including supply & fixing suitable size of copper wires and all other accessories including connection as per direction of E.I.C.

Supply and installation of mortuary tray matching with mortuary chamber each having approx dimension 22'' (inch) x 84'' (inch) fabricated of 20 SWG stainless steel fixed on 3/4'' (inch) O.D. stainless steel pipe frame complete with 4 nos. brass wheel rigidly fixed with M.S. angle by including stainless steel handle on both sides & painting the iron plant with Epoxy paint as per direction of E.I.C.

S & installation of 2 tier self Structure of 75 mm x 75 mm x 6 mm M.S. angle / suitable for necessary nuts, bolts and washers etc. as per direction of E.I.C.

S & installation of open type compressor (Make freeze king / kirloskar / Smoking / Sea bird) 3-5 ton capacity with necessary fly wheel suitable for use M22 Refrigerant Mounted on CC base founding (Use Anti Vibration pad) fabricated MS – ‘U’ channel structure made of 50mm x 100mm x 50mm x 6mm thick and nut, bolt, washer, with Epoxy painting etc. as per direction of E.I.C. for conversion of cooling system from R12 to R22 including civil work as required as per direction of E.I.C.

Supply & installation of Air cooled condenser made of 3/8” inch or 5/8” inch (28SWG) O.D. Copper pipe (4 row) 3/8” inch or 5/8” inch ‘U’ bend aluminium “Fins’ complete with 16 gauge G.I. Frame with 4 nos. blower fan housing (15” inch x 4 nos) including supply and providing structure made by necessary M.S. angle & flat iron etc. including painting with epoxy paint suitable for operation on R22 refrigerant as required to change existing system including civil work as required as per direction of E.I.C.

Supply & installation of Cooling coil made of 3/8” inch or 5/8” inch (22SWG) O.D. Copper pipe (4 row) 3/8” inch or 5/8” inch ‘U’ band aluminium “Fins’ complete with 16 gauge G.I. Frame with 4 nos. blower fan housing (15” inch x 2 nos) including supply and providing structure made by necessary M.S. angle & flat iron etc. including painting with epoxy paint suitable for operation on R22 refrigerant as required to change existing system as per direction of E.I.C.

S & installation of ‘V’ Belt size as per compressor required and as per direction of E.I.C.

S & installation of “Expansion Valve” for R-22/R-134A/R404 refrigerant as per direction of E.I.C.

S & installation of “Solenoid valve” dia 3/8” or 5/8” as per direction of E.I.C.

S & installation of LP Switch as per direction of E.I.C.

S & installation of HP Switch as per direction of E.I.C.

Supply, installation & Fabrication of “Copper pipe line” (Hard pipe) size as per compressor for required suction & Discharge liquid line including hand shut off valve necessary vibration pipe and all jointing kits, fittings from compressor to cooling coil with condenser coil including pipe line mounting arrangement made by M.S. angle, flat iron, paint with epoxy paint etc. as per direction of E.I.C.

S & installation of “Digital thermometer” with thermostat switch and built in Microprocessor.

S & installation of “Dryer” with filter

Supply & charging of refrigerant Gas

S & F 440 V , 6 amp-12 amp DOL startar as per sample.

S & F 440 V , single phase preventor as per sample.

Testing & Commissioning of the hole installation of Refrigreant system with all joints,valve etc. incl. leak testing,flushing at diff. time by dry N2 Gas as per direction of EIC.

Dismantling the existing damage roof of Mortury Plant and washing the plant by Detto, phenyl and other chemical incl. remove the garbage as per direction of EIC.

NOTE:- The Rates to be Quoted by the Bidder should be Inclusive of all Taxes

GITANJALI ELECTRONICS AND ELECTRICALS

INDIAN SERVICE