WELCOME MAINTENANCE TO MARRIED ACCN INCLUDING REPAIR REPLACEMENT OF CERTAIN BR ITEMS SUCH AS PLUMBING JOINERIES SANITARY ITEMS FLOORING AND OTHER MISC ITEMS AT PHASE II ZONE A UNDER GEIRD EAST BANGALORE

Amount

Taking down cement Plaster of any description on brick walls, stone walls including racking out joints, hacking for key, scrubbing down with water remove dust, debries/ rubbish etc., complete all as specified and as directed.

M&L rendering 15mm thick in cement mortar 1:6 on brick walls or on concrete surfaces, plastered surfaces finished even and Smooth without using extra cement complete all as specified and as directed.

M&L rendering 5mm thick in cement mortar 1:3 on Concrete Surfaces as in Ceiling, etc., plastered surfaces finished even and Smooth, without using extra cement, complete all as specified and as directed.

M&L preparing new Plastered Surfaces of Walls and applying two Coats of Distemper Oil Emulsion over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces on ceiling and applying two coats of white wash etc complete all as specified and directed

Taking down chowkat or frame with shutter (without taking off shutter from the frames) exceeding 1.5 Sqm but not exceeding 4.0 Sqm etc complete all as specified and directed

Taking down chowkat or frame with shutter (without taking off shutter from the frames) not exceeding 1.5 Sqm and removing to store etc complete all as specified and directed

Taking down shutter of any description exc 1 Sqm ad n exc 2 sqm each etc complete all as specified and directed

Supply and fitted to chowkats 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc,. (without sash bars) edges of framing plain , chamfered or rounded, fitted with cut and mitred beads for securing glass etc, 35 mm thick shutter. Size of members of shutters as specified in SSR Part-I clause 8.20 (a) complete all as specified.

S&F in repairs double action spring hinges,150mm size mild steel with steel wire spring, stove enamelled black complete all as specified and as directed by the Engineer in charge.

S&F plain, framed, panelled shutter (any number of panels) of II nd class Hard wood 35 mm thick, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc

Supply and fix 100mm long butt hinges medium weight ,cold rolled mild steel including necessary welding if required .

Supply and fix in repair aluminium anodized barrel tower bolt 150mm long extruded section.

Supply and fix 150mm size aluminium anodized handle fabricated type anodised

Supply and fix in repairs 150mm size aluminium anodized handle fabricated type anodised

Supply and fix aluminium anodised barrel towel bolts of extruded section of length 200 mm all as specified and as directed.

Supply and fix in repairs aluminium anodised barrel towel bolts of extruded section of length 200 mm all as specified and as directed.

Supply and fix in repairs aluminium anodised barrel towel bolts of extruded section of length 150 mm all as specified and as directed.

S & F pressed steel door frames of size 105mm x 60 mm with one or more rebates manufactured out of 1.25 mm thick plain black mild steel sheet including necessary fixing lugs, hinges, lock strike plate etc all as specified and as directed.

M&L for PCC 1:3:6, type C1 (using 12.5 mm graded stone aggregate) for filling in pressed steel door frame.

Supply and fix aluminium alloy anodised sliding door bolt with hasp, staple extruded sections of length 300 mm, all as specified and as directed.

Supply and fix in repairs aluminium alloy anodised sliding door bolt with hasp, staple extruded sections of length 300 mm, all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS tube, supplying and fixing in opening as per specification and drawing.

S&F factory made solid PVC moulded door shutter with particle board core , 28 to 30 mm thick(styles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face and fixing in frame at site as per specification and drawing.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or aluminium wire staples complete all as specified and as directed by the Engineer in charge.

Supply and fix in repairs of Drapery Rod 20 mm dia, Decorative type complete all as specified and as directed.

Supply and fix in repairs of End Stopper, Decorative type and fixing Brackets for the Drapery Rod 20 mm dia. (One Set comprises of 2 No. of Decorative type End Stopper 2 No. of fixing Brackets) and fixed-in-repairs, complete all as specified and as directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or aluminium wire staples complete all as specified and as directed by the Engineer in charge.

S&F in repair ball catcher with 8 mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified

S & F in repairs stainless steel self closing auto hinges for cabinet shutter complete all as directed

S & F in repairs stainless steel telescopic channel ball bearing drawer channel 500 mm with loading capacity: 45Kgs complete all as directed

S&F in repairs 40mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electrogalvanised all as specified and directed

Supply and fix in repairs motice lock brass vertical type 4 levers 100 mm, all as specified and directed of make Godrej or equivalent

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring,shoe all as specified and as directed.

Supply and fix in repairs MS window handles(left/right) all as specified

Supply and fix rubber shoe fixed with MS /aluminium screw suitable for floor door stoper all as specified and directed

Supply and fixing in repairs brass Mortice latch with two levers( vertical type) heavy duty of make Godrej or equivalent

Material and labour for preparation of old white wash surfaces and applying one coat of white wash on wall complete all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 38 above, but one coat of white wash on ceiling.

Material and labour Washing, rubbing down and stopping of of old distempered wall surfaces and applying one coat of distemper oil emulsion on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No. 40 above, but two coats of oil bound distemper.

Material and labour Washing, rubbing down and stopping of distempered and painted surfaces of old distempered surfaces and applying one coat of distemper oil emulsion on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour Washing, rubbing down and stopping of distempered and painted surfaces of old distempered surfaces and applying two coat of distemper oil emulsion on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old wall surfaces and applying one coat of cement paint on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for preparation of surfaces of any description of old painted surfaces and applying one coat of plastic emulsion paint complete all as specified and as directed.

Complete removal of existing treatment of wall surfaces and finishing the surface with two or more coats of Birla/JK wall care putty to receive the good & smooth surfaces and applying two coats of plastic emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for applying two coats of 100% premium acrylic emulsion Paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004.Alkali&fungal resistance,dirt resistance exterior paint of required shade (company Depot tented) with silicon additives @ 1.43litre/10sqm weather proof emulsion paint over and including priming coat of exterior primer complete including removal of existing treatment and,filling minor cracks with necessary crack filler (DrFIXIT or Equivalent As approved)as per the manufacurer intructions complete all as specified and as directed by Engineer in charge.

Material and labour for applying one coat of 100% premium acrylic emulsion Painnt having VOC less than 50gm/litre and UV resistance as per IS 15489-2004.Alkalie&fungal resistance,dirt resistance exterior paint of required shade (company Depot tented) with silicon additives @ 1.43litre/10sqm weather proof emulsion paint over and including priming coat of exterior primer complete including preparation ,filling minor cracks with necessary crack filler (DrFIXIT or Equivalent As approved)as per the manufacurer instructions complete all as specified and as directed by Engineer in charge.

Material and labour for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 49 above, but two coats of synthetic enamel paint on wooden surfaces.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed by Engineer-in-Charge.

All as per Item Srl No 51 above, but two coats of synthetic enamel paint on steel surfaces.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete, drilled for fixing steel sheeting or other covering. doors etc to be prepared for hanging or sliding with and including either hooks and hinges of steel hanging door fittings and hanging, also fastening and fixing, wheels in bottom and necessary arrangements complete confirming to Fe 290 Gde E-165 with or with out frame work , fabrication and errection at at site, all as directed.

S&F in repair plain mild steel plain black 1.6mm thick sheets in door, gates etc, with necessary welding, drilling etc.

M&L Welded steel wire fabric supplied and fixed complete to wood or steel members weight nexc 4Kg per sqm.

S&F Bands, straps,supports or stays for rain water pipe,hold fast etc and similar articles conforming to Fe 290 GDE-e-165 etc

M&L for providing cement concrete type C1 1:3:6 (20mm graded aggregate) as in hold fast etc

M&L for preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

Supply and fix powder coated aluminium ( minimum thickness of powder coating 50 micron) section as in window, ventilation, glazed with aluminium shutter, one or more rebates including joining clips for fixing, glazing clips, rubber beading screwed and handle complete all as specified and directed by EIC including taking down old joinery etc.

S&F in repairs glass pane pin headed including removing loose or decayed putty sheet figured glass, pin head type and glazing with oil putty/rubber beading in square not exceeding 0.5 Sqm in each pane of 4 mm thick etc

Supply only Sheet glass 4mm thick , ordinary quality, in squares n exc 0.5 sq. m each pane

Supply and fixed in repair Harrison rails, mild steel, chromium plated 20 mm dia with fixing brackets, stops, rollers etc complete

Supply and fixed in repair stainless steel curtain rod 20mm dia complete all as directed

Supply and fix in repairs anodised brackets for curtain rod stainless steel curtain rod of 20mm dia all as specified and as directed.

Supply and fixed in repair Aluminium (Die cast) body door closer, hydraulically regulated designation No 3, univeral type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete.

Supply and fixing in repairs 5.5 mm thick sheet glass ordinary quality and glazing with oil putty/ glazing pins / spring clips/rubber beads in square exc 0.50 Sqm each in each pane including hacking out old broken glass all as specified and as directed.

Supply and fixed in repair solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers complete

Material and labour for grinding of old terrazzo/kota tile floor, skirting, marble / granite kitchen cooking plat form using machine with acrborandum of 220 to 350 grit and applying oxalic acid powder, machine fitted with hessain bobs and finally applied with wax polish complete all as specified.

Supply and fix in repairs venetian blinds vertical type 100 mm width with approved fablric and powder coated aluminium fittings such as top rails, metal weight nylon button loops etc to ,match with the top rail metal base complete all as specified and dircted

Material and labour Prelaminated particle board 18/19mm thick ,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed withnails to timber frame work as in shutters for kitchen shelves/cupboards including teak wood lipping 6mm thickfixed with nails fixed in repairs .

Material and labour Prelaminated particle board 18/19mm thick ,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed withnails to timber frame work as in pelmet boxes or in narrow width nexc 15cm each including teak wood lipping 6mm thickfixed with nails fixed in repairs .

Resecuring or easing & adjusting, without taking down but exc 1 sqm but not exc 2 sqm each

Resecuring or easing & adjusting, without taking down but exc exc 2 sqm each

S&F in repairs ball valve 20mm dia, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. capacity in litres exc 500 & n.exc 1000 complete all as specified

Rotational moulded polyethylene water storage tanks exc 250&nexc 500 litrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,including dismantling watertanks and removing to store all as specified.

Rotational moulded polyethylene water storage tanks exc 500&nexc 1000 litrs capacity (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I,including dismantling watertanks and removing to store all as specified.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 250 Ltrs but not exc 500 Ltrs all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc., of capacity exc 500 Ltrs but not exc 1000 Ltrs all as specified and as directed.

Supply and fix in repairs polyethylene water tank cover with hinges suitable up to 1000 Ltrs tanks, all as specified .

Supply and fix in repairs 15 mm CP cast copper alloy bib taps with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified

Supply and fixed in repair, long body bib tap without wall flange, foam flow, 15 mm dia chromium plated, fancy type, screwed down, screwed for iron pipe complete all as directed

Supply and fixing CP wall mixer 3-in-1 system including three joints to steel pipes, plugging and screwing to walls fixed in repairs complete all as specified and as directed. Make Jaguar CAT No. 7281 or Equivalent.

Supply and fix in repairs brass chromium plated bottle traps for WHB/urinal with inlet and outlet screwed for pipe including necessary packing union and cap 40 mm bore/suitable of trap.

Supply and fix in repairs 15 mm pillar tap,fancy type , cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe all as specified

Supply and fixed in repair Sink cock 15mm dia swan neck of CP Brass type with casted spout without foam flow complete all as specified

Supply and fix in repairs pillar tap of PTMT fancy type of 15 mm dia any colour high pressure screwed for iron pipe [Minimum weight for 15 mm – 120 gms] i all as specified in repair.

S&F in repairs15 mm fancy type chromium plated Stop valves, angle cock cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions complete

Supply and fix in repairs 15 mm dia stop valve of PTMT any colour high pressure screwed for iron pipe [Minimum weight for 15 mm – 90 gms] all as specified .

Supply and fix in repairs 15 mm dia of bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified .

M&L Waste fittings,32mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs

S&F in repairs 15 mm fancy type chromium plated with long shank Stop valves, angle cock cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle( concealed type ) screwed both ends for iron pipe or for unions complete

Supplying and fix in repairs PVC connection 15 mm size with PTMT nuts of length 450 mm, all as specified.

All as per item No : 96 here-in-before but 600mm lengths, all as specified and as directed.

Supply and fix in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern including jointing to squatt pattern closet and making good the floorcomplete all as specified

Supply and fix in repairs stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washer’s including cast iron cantilever brackets, connecting union etc over all size 915 mm x 460 mm with bowl size 410 x 330 x 160 mm.

Supply and fixed in repair PVC flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle etc complete . Make : Prayag/Commander

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps but including brackets, cutting for and pinning brackets or errecting stands /rockbolts to fixing all as specified .

Supply and fix in repairs water closet seat cover white or black colour closed pattern with flat bottom complete all as specified.

Supply and fix in repairs grating of 100 mm dia of stainless steel for floor trap etc,complete all as specified.

Supply and fix in repairs grating of 100 mm dia but with holes of stainless steel for floor trap etc,complete all as specified.

Material and labour for 15 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed.

Material and labour for 20 mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete including scafolding /jullah to work all as specified and as directed.(work shall carried out upto 5 storied building )

Supplying & laying in repairs of 16mm dia CPVC pipes SDR 11 fittings on walls/ ceiling or laying in floors complete including all fittings all as specified and as directed

All the same as per item No 107 here in before but 20mm dia CPVC pipes

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified

Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle,and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and as directed

Supply and fix steel ventilators with top hung shutters including hinges ,and steel peg stay complete all as specified and as directed

S&F Gun-metal, globe or gate valvesof 20 mm bore , with iron wheel head, screwed both ends for iron pipe and fixed in repairs

Supply and fix 40mm dia HDPE pipes of pressure rating 6 Kg / cm2 fixed to walls, ceilings or in floors, including taking down old HDPE pipe fixed in any position complete all as specified and as directed.

Supply and fix in repairs brass CP shower rose 125 mm with or without / swivel joints,as specified and as directed.

Supply and fixed in reapirs EWC vitreous china pan with 'S' or P trap white , including connection to drain or out going pipe and flushing pipe, antisyphonage pipe etc complete all as specified and directed , Make Jaquar or Jhonson/Cera as approved

Supply and fix in repairs 15 / 20 mm GI fittings like elbow, tee, socket, reducers,tank nipple like fittings fitted to existing line in repairs all as specified and as directed.

Supply and fix in repairs 15 / 20 mm CPVC fittings like elbow, tee, socket, reducers like fittings fitted to existing line in repairs all as specified and as directed.

S & F fancy type chromium plated 2 way bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed. Make: Jagur or equivalent

S&F in repairs Health faucet,(ABS Body)mid steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified.

Cutting screwing existing steel tubing of 15mm dia for addition/alterations pipes at any ht (max. : G+5 concept including provision of scaffolding to work ) etc complete all asspecified and as directed

Cutting screwing existing steel tubing of 20 mm dia for addition/alterations pipes at any ht (max. : G+5 concept including provision of scaffolding to work ) etc complete all asspecified and as directed

Taking up or down 15mm dia GI old tubing and conncetions including cleaning and re-fixing in new or old positionand at any ht (max. approx. G+5) to walls/chases/ceilings or laying in floors etc complete all as specified and as directed.

Taking up or down 20 mm dia GI old tubing and conncetions including cleaning and re-fixing in new or old positionand at any ht (max. approx. G+5) to walls/chases/ceilings or laying in floors etc complete all as specified and as directed.

Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and directed

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed

Supply and fix in repairs kitchen stand made out of stainless steel of size length 910mm x width 225mm x height 790mm ,make Prayag / Maruti or Equivalent complete all as specified and as directed

Supply and fix in repairs kicking plates any size of galvanised iron sheet 1mm thick fixed with galvanised screws complete as specified and directed

Supply and fix in repairs vitreous china water closet (Orissa pattern) of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti syphonage pipe and provision of concrete bedding etc complete all as specified and directed

S&F in repairs CP brassTubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repairs Cabinet mirror, moulding theremoset litron formaldehyde of plientil formaldehyde with chromium plated frame openable type and mirror colour white Make : Prayg / Commander

Supply and fixed in repairs corner shelves glass fitted with CP brackets and screws complete all as specified and directed

Supply only integral water proofing compound of approved make as directed

Supply only Oil putty of approved make as directed

Supply only Liquid waterproofing compound of approved make as directed

Repairs to internal water supply and sanitary fittings, blockage of water pipe lines , less pressure of water etc of day to day urgent repair works, Plumber to be provided to concern JE for attending urgent complaints complete all as specified and as directed by EIC. Plumber shall be provided every working day except sundays and holidays for attending and completing complaints on same day during working hours with necessary tools . Note : The quoted rate shall be included providing safety gadgets to be deployed worker as per govt norms and holidays as per labour laws in vouge. Minimum fair wages shall be maintained and to avoid any dispute in this regard.

Supply and fix in repairs Nipple PTMT suitable for 20 mm dia bore pipe in HDPE water tank ( Minimum weight 15mm-38gms/20mm-45 gms/25mm-65gms) complete as directed

Supply and fix in repairs Extension Nipple PTMT suitable for 15 mm dia bore pipe in HDPE water tank ( Minimum weight 15mm-18gms) complete as directed

Supply and fix 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed

Supply and fix110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes all as specified and as directed

Taking down existing PVC pipe of any description and re fixing in old or new location complete all as specified and as directed.

Supply and fix PVC (SWR) bends with access doors 110 mm dia of bore, including taking down old bends all as specified and as directed.

Supply and fix PVC (SWR) bends with access doors 75 mm dia of bore, including taking down old bends all as specified and as directed.

Supply and fix PVC (SWR) junction Tee with or with out access door single equal of bore 110 mm dia, , in repairs all as specified and as directed

Supply and fix PVC (SWR) bends with access door any radius 100 mm dia of bore, including taking down old bends all as specified and as directed.

Supply and fix PVC (SWR) branch with or without access door piece single equal of bore 110 mm dia, , in repairs all as specified and as directed

Supply fix in repairs PVC (SWR) floor trap of 75 mm dia plain with grating including jointing with solvent cement complete

Supply fix in repairs PVC (SWR) multi floor trap of 75 mm dia with grating including jointing with solvent cement complete

S & F in repairs PVC Clamps, bands,straps suports or stays for rainwater, ventilating pipes including bolts & nuts & securing ends of stays to wall or roof

Dismantling of floor or wall tiling including cement mortar bedding, and disposing of debris outside MD land all as specified and as directed.

Material and labour for glazed ceramic coloured tiles 300 x 200 x 7 mm /450x300x7mm on vertical surfaces such as skirting / dados including rendering 10 mm thick in CM 1:3 as in backing coat for fixing tiles complete all as specified and directed.

M&L for Non-skid ceramic tiles coloured 7 to 8mm thick in floors area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm ,in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L granite(of any type )tiles 20mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding polishing nosing/ rounding edgescomplete,including 15mm thick CM 1:6 screed bed complete all as specified and as directed

Material and labour for vitrified ceramic coloured tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick CM 1:6 screed bed complete all as specified and directed

Demolition of PCC of any description and in any position as in sunken floor/PCC bed including removal debries upto a distance of 500 meter from the building all as specified and directed by Engr-in-Charge.

M&L for cement concrete type D2 1:4:8 using 40 mm graded aggregate as in lean concrete as in sunken floor complete all as specified

M&L for 30 mm thick cement concrete type B-1, 1:2:4 using 20mm graded aggregate complete all as specified.

M&L for 75 mm thick cement concrete type B2, 1:2:4 ,using 40mm graded aggregate, finishing cement concrete surface even and smooth without using extra cement complete all as specified.

Material and Labour for applying silicon sealant in the gaps of windows in repairs all as specified and as directed by Engineer in charge.

Material and Labour in repairs for fixing rubber beading for Aluminium windows all as specified and as directed by Engineer in charge.

Supply and fix in repairs suitable brass spindle all as specified for repair of Bib Tap, Stop Valve,angle cock etc.

Supply and fix in repairs syphon kit as required for low level flushing cistern all as specified

Supply and fix in repairs syphon kit washer for flushing cistern all as specified

Supply and fix in repairs PVC waste pipe of 32 mm dia all as specified

Cleaning accessable or non accessable roof upto G+5 storied building and cleaning the RCC roof with wire brushes , removal of tree root,caked mud etc sweeping with brooming and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and removal of debbries from the site premises as directed by EIC all as specified and directed

Material and labour for welding in repairs to steel windows / ventilators /doors/gate/small articles exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded nexc 6mm including cutting out decayed members of the joinery,replacing of damaged builders hardware etc and refixing the same with necessary material (repalcement of glass pane if shall be measured and paid seperately)any length and thickness of metal to be welded as per site requirement ,painting touchup etc complete all as specified and as directed (Work up to the height of seven stories building)

M/S SIRI BUILDERS

yuvan constructions

Solar Electricals and Electronics

Sreyas Enterprises

KARTHIK INCORPORATE

Lucky Enterprises