Composite School Gyarai Block Moth Janpad Jhansi me Peyjal Hetu Solar Tanki ke adhisthapan ka karya. Under scheme B.V.N. 2025-26

Earth work in excavation by mechanical means (Hydraulic excavator)/manual menas over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer in charge dsr 2.6.1

Providing and laying in position cement concrete of specified grade excluding the cost of centerring and shuttering - All work up to plinth level 1:4:8 (1 cement :4 coarse sand (zone-III) derived form natural sources : 8 graded stone aggregate 40 mm nominal size dsr 4.1.8

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 )1 cement :1.5 coarse sand (zone-III) derived form natural sources :3 graded stone aggregate 20 mm nominal size derived from natural sources) sunshade SLAB DSR 5.3

M.S. work in R.C.C. up to two floor lvl steel reinforcement for R.C.C. work including straightening, cutting, beeding, placing in position and binding all completed DSR 5.22A.6

Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.1

Cement Concrete pavement with 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal sizw) including finishing complete DSR 11.7

15 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand) DSR 13.5.2

Steel work in built up tublar tursses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, elded and bolted including special shapped washers etc. complete (a) Electric resistance or induction butt welded DSR 10.16.3

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specification : Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture, DSR 2023, 13.48.3