MP Fund 2024-25, Construction of Bus Shelter Market Near in Polur Town Panchayat

Amount

Earthwork excavating and depositing on bank with in initial lead & lift for all loose soil, sub soil, black cotton soil, murram gravelly soil, hard re earth, shales, except hadr rock requiring blasting, etc., Complete as per SS 20 B. for foundation.

Cement Concrete 1:4:8 ( One Cement Four sand and Eigte aggregate ) using 40 mm ISS HBG metal, including cost and conveyance of materials to site, labour charges for mixing, laying, finishing, compacting, curing etc.complete.

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Reinforcement Cement Concrete 1:1/2:3 (One cement, One & Half sand, Three aggregate ) using 20 mm guage machine broken hard broken granite stone jelly for all RCC including cost conveyance and all labour charges etc. complete.

Collection supply of Well Gravel from approved quarry and filling the same in layer by layer, each layer not execeeding 15cm thick, including cost and conveyance of sand to site and labour charges for for filling, watering, tamping etc. complete

Brickwork in cement mortar 1:5 ( one cement and five sand ), mix using well burned new country bricks, including cost and conveyance of all materials to site, labour charges for mixing, laying, finishing, symaltaneously pointing with same morter, watering etc.complete.

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Dadooing the wall glazed tiles of size 305mm x 200mm x 6mm size of approved make and quality and colour 1set in cement mortor 1:2 (one cement and two sand) over 10mm base layer plastering and pointing with white cement neatly as directed.

Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulated SC .unsheathed cu.conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box and 5 Amps F.T switch with painting of suitable colour for open PVC light point/ Fan point (For Electronic Regulator)5 point per coil) SD 25

Light Point

Fan Point

Supply and Fixing Stailess Steel Bench Work

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Writing Name board work by using enamal paint and cost and matrials conveying charge etc. complete complying with standard specification .