Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.4 LAccepted-AOC NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹36.2 L+₹73,577.60 (2.08%)Rejected-Finance | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹36.3 L+₹85,898.55 (2.42%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹79,000
Closing Date
8 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH and RH KIRKEE
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Kirkee Pune 411003
RENOVN OF BATHROOMS AND TOILETS OF BLDG NO P 33 PROVN OF ONE TOILET BLOCK PROVN OF KITCHEN SINK AND PLATE RACK IN BLDG NO P 3 P 12 P 13 AND P 14 PROVN OF THREE PHASE ELECTRIC SUPPLY FOR SLIDING R4 SANGVI MAIN GATE AT AUNDH UNDER GE MH AND RH KIRKEE
2022_MES_536139_3
8268/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH and RH KIRKEE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE MH and RH KIRKEE
₹79,000
1 Oct 2022
20 Aug 2022
10 Sept 2022
20 Aug 2022
8 Sept 2022
27 Aug 2022
20 Aug 2022 - 1 Sept 2022
Amount
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises all as specified and directed by Engr-in-Charge.
M & L for 25 mm thick PCC M-15 grade (nominal mix) using 12.5 graded stone aggregate as in base of floors complete all as specified and as directed by Engineer-in-Charge.
M&L for Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick in CM 1:4 screed bed or bedding layer in CM 1:4 for laying floor finishes all as specified and directed.
M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 all as specified & directed.
M&L Coloured Glazed ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm / 450 x 300 x 7mm thick, on vertical surfaces such as skirting, dados etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10mm thick rendering as in backing coat in CM 1:4 complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.
M & L for 75mm PCC M-7.5 grade (nominal mix) using 40 mm graded stone aggregates as in sub base of floor complete.
Demolition of brick work, PCC block mansonry or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.
M&L for Pre-cast cement concrete block masonry of PCC 1:3:6 Type C1 using 20mm graded stone aggregate with solid blocks straight or curved on plan , exc 6m mean radius and exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
Demolition of RCC (Reinforcement cut as reqd to facilitate to demolition) etc with diamond cutter complete all as specified and directed by Engineer-in-Charge
Dismantling of old Granite / stone slab of any description and any thickness.
M & L for 20mm thick Granite slab machine cut in laid over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including screed bed 15mm thick in CM 1:4 complete.
M & L for 20mm thick Granite slab machine cut in dado/skirting over cement screed and jointed with grey cement slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 10mm thick as in backing coat in CM 1:4 complete.
All as per item No 13 above here in before but 20 mm thick Machine cut Cudappah stone in floor or in any position of any colour and shape as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.
Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for complete removal of existing treatment of old surfaces and applying two coats of cement base paint including preparation of surface & including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15mm thick on internal surfaces in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement ) all as specified and directed
M & L for applying three coat of white wash on wall including preparation of newly plastered surfaces complete all as specified and directed.
M & L for applying one coat of white wash on Ceiling including preparation of old surfaces with putty in hole or uneven surfaces complete all as specified and directed.
Taking down chowkats and frame n.exc 1.5 Sqm incl shutter with out taking off shutters from frame all as specified and directed by Engr-in-Charge.
Taking down chowkats and frame exc 1.5 Sqm and n. exc 4.0 sqm incl shutter with out taking off shutters from frame and removing from site specified and directed by Engr-in-Charge
S&F 105x60 mm Pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with one shop coat of red oxide primer complete, as specified, supplied and fixed all as specified and directed by Engr-in-Charge.
M&L for PCC M-10 grade (nominal mix) using 12.5 mm graded stone aggregate in door and windows frames, any size, single or double rebated, including arrangement for fixing of hinges and fixtures as required
S & F 35mm thick factory made second class hard wood plain, framed, panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated all as directed.
S & F Aluminium, anodised, barrel tower bolts of extruded section 150mm long complete.
S & F Aluminium, anodised, barrel tower bolts of extruded section 200 mm long complete.
S & F Aluminium handles, cast type, anodised size 150 mm long complete.
S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.
S&F Solid PVC door frame of size 50mm X47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing.
S & F stainless steel Butt hinges 75 mm long, medium weight, cold rolled steel complete.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed.
S & F Aluminium, anodised, barrel tower bolts of extruded section 125mm long complete all as specified and directed.
S & F Aluminium handles, cast type, anodised size 125 mm long complete.
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded with a shop coat of red oxide primer complete all as specified and as directed.
S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded with a shop coat of red oxide primer complete all as specified and as directed (for mosquito proof shutter)
S &F mild steel work in framed work such as grills framed guard bars, gratings, ladders etc with ends of bars shouldered and / or riveted or forged into spikes and similar work.
S& F 3mm thick sheet glass ordinary quality n.exc 0.5sqm each pane fixed with oil putty complete.
S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to new steel window with nut bolt,fixed complete all as specified and directed.
Supply & fix sheet glass, ordinary quality, 3 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
S & F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised steel wire staples complete all as specified and as directed.
M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide, primer complete all as specified.
M&L for applying two coats of synthetic enamel paint on primed steel surface over 10 cm width or girth complete all as specified.
M & L for preparation of old steel surfaces exc 10 cm width or girth and applying one coats of synthetic enameled paint complete all as specified.
S&F aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator all as directed by Engr-in-Charge.
Cutting chases, pinning in concrete block or slab, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth.
Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required.
Taking up or down 20 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required.
Taking up or down 25 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required.
Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and directed by Engr-in-Charge.
All as per serial item No.52 above but except steel tubing.
Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and directed by Engr-in-Charge.
Supplying & fixing to walls and ceiling 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and directed by Engr-in-Charge.
Supplying & laying in trenches 40 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and directed by Engr-in-Charge.
S&F in repair rotational moulded polyethylene triple layer water storage tanks of capacity 2000ltr hoisted and fixed in position including 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and directed. Note : Unit rates is deemed to be included the cost for removing old tank of any description.
S&F Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe and fixed in repair.
S & F in repairs 40mm dia bore Gun metal, globe or gate valves with Iron wheel head, screwed both ends for Iron pipes and fixed.
S & F in repair stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed - bore dia of pipe 15 mm.
S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, fixed in repairs.
S & F in Chromium plated shower roses with or without swivel joints, 125mm size, including fixing to steel pipe or union, fixed in repairs
S&F 15mm dia fancy type Bib taps chromium plated cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repairs vitreous china wash hand basin white size 550x450mm/560x410 oval type excluding taps waste chain but including brackets cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.
S & F CP,15mm bore push cock, screwed for iron pipe and fixed.
S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe).
S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete M-15 grade (nominal mix) using 230mm graded stone aggregrate complete including making good to floor.
Supply and fix in repairs PVC flushing cistern 10 ltrs capacity valveless, syphonic action type including inlet, ball valve, float, handle and brackets etc.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white excluding flushing cistern but including bolts, Flush pipe, seat cover and connection to drain (or out going pipe) and to flushing pipe, anti-syphonage pipe etc. complete, all as specified and directed.
S & F 32 mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipes or connections including necessary packing union and cap.
Supply and fixing in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete al as specified and directed by Engineer in Charge.
S&F in repairs two way bib tap 15mm chromium plated complete.
S&F in repair health faucet chromium plated fixing to 15 mm bore pipe.
S&F in repair toilet paper roll holder.
S&F in repairs towel ring chromium plated of approved make.
S & F in repair, 110mm thick PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints laid/fixed on wall etc complete.
S & F in repair, 75mm thick PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints fixed on wall complete.
M & L 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement
M & L 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement
S&F in repair,PVC (SWR) bends any radius,for 110mm dia pipe.
S&F in repair PVC (SWR) branch piece, double (double Y), equal or unequal for 110mm dia pipe.
M & L For PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
M & L for PCC M-7.5 grade (nominal mix) uisng 40mm graded aggregate as in filling, mass concrete, for sunkun floor or any other type of flooring.
M & L for providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious inection grouting at leakage point using Cebex 100 plasticised expandiv grouting admiture ,application of polymer modified vatta at slab wall junction using Nitoband SBR latex screed modificer cum bonding agent and application of two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including all tools and tcckles as per manufacturer's specification
S&F Pre Polished Chequered cement concrete tiles glossy and rubburised finish colour 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors including 15mm thick screed bed in CM 1:4 under tiles incl all as specified and directed by Engineer-in Charge.
Surface dressing n. exc. 15 cm deep in hard / dense soil complete all as specified and as directed.
Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or shafts, well , cesspits, manhole, pier holes, laying UG cable etc, and getting out in hard / dense soil.
Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or shafts, well , cesspits, manhole, pier holes, laying UG cable not exc 1.5m in depth and getting out in soft / lose soil.
Returning, filling, incl spreading levelling, watering and well ramming in layers not exc 25cm all as specified and directed by Engr-in-Charge.
Removing excavated material to distance not exc 50m and depositing where as directed at a level not exc 1.5m above the starting point.
M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
M&L for Hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces.
M&L for 75mm thick PCC M-10 grade (nominal mix) using 40mm graded stone aggregate as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement.
Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for rendering 10mm thick in CM 1:4 finished even & smooth without using extra cement as in ceiling complete all as specified and directed
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
S&F aluminium anodised, barrel tower bolts 150mm long of ex- truded section and fixed
S&F 150 mm alluminium handle cast type anodised .
S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and/or ri-veted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0.
M & L for RCC M25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span.
M & L for RCC M25 (Design Mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like.
M & L for RCC M25 (Design Mix) as in chajjas.
M & L for RCC M25 (Design Mix) as in columns, pillars, piers, post and struts.
M & L for RCC M25 (Design Mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per Item No 107 here-in-before but 6 to 8mm dia bar.
All as per item No.107 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders.
M & L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished curved surfaces of concrete complete all as specified and as directed.
M&L for non-skid ceramic coloured tiles (400 x 400 mm) x 7mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed or bedding layer in cement mortar 1:4.
M&L 100mm dia CI Nahani trap, with grating including jointing to waste pipe fixed in cement concrete M-15 grade (nominal mix) using 20 mm graded stone aggregate.
S & F PVC valveless, syphonic action type flushing cistern, 10 litre capacity low level, white with inlet, ball valve, float and handle including brackets.
S&F 20mm Gun metal, glove or gate valve with iron wheel head, screwed both ends for iron pipe and fixed.
S&F vitreous china wash basin white, flat back of size 450 x 300mm, excluding taps, waste chain & plug & porcelein stopper but including brackets, cutting for and pinning in ends of brackets including waste coupling and waste pipe all as directed Make: S2040124 of CERA/Hindware/Somany.
S&F in brass CP towel rail, 20mm dia,600mm long including brass CP brackets complete.
S&F for glass shelf assembly with chromium plated brass screw and cup washers all as specified and directed
Supply and fix 500 liters capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.
S&F 20mm ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed.
Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft loose soil.
M&L 75mm thick PCC M-10 grade (nominal mix) using 40 mm graded stone aggregate as in sub base all as specified.
S&F Machine pressed precast concrete interlocking paver block with grey cement and pigments of any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 Grade layed over & including sand cushioning not less than 25mm thick complete.
M&L for providing PCC M-15 grade (nominal mix) using 12.5 mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed.
M & L for applying APP (Atactic Poly Propylene) bitumen membrane 3mm thick APP modified weight not less than 3.60 Kg/Sqm reinforced with non woven polyester fibre of weight 160 gms/sqm as center core and without multiple layers of polyethylene, finished on top and bottom with 7 micron thick flammable polyethylene, applied by thermo fusion using LPG torch on the bottom portion of the membrane, after applying a coat of bituminous primer 0.40Kg/Sqm over roof ( An overlap of 100mm & 150mm shall be provided on sides and ends respectively ) all as per manufacturers instructions.
M&L for PCC M-10 grade (nominal mix) using 40mm graded stone aggregate as in bed to drain pipe including packing under haunching against sides of pipe after laying in trenches for 150 mm dia RCC pipe including testing complete.
M&L RCC pipes class NP-2 with socketed ends laid and jointed complete with rubber ring joints of 150mm dia. Note :- Laying of sewage line in running sewage water & temporary diversion /plugged of existing sewage line & bailing of sewage water is the responsibility of contractor and the rate for the same is deemed to be included in the unit rate quoted.
S & F 100 mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors
S&F 100mm bore cast iron (sand cast pipes) soil, waste and vent pipes, in any length with or without ears, with cement joints,fixed to walls
S&F 100mm CI bends (any radius) diminishes pieces or tapers.
S&F 75mm cast iron cowl complete.
M&L for reinforced cement concrete M-15 grade (nominal mix) using 20mm graded aggregate as in slabs supported on walls, beams etc for manhole etc.
M&L for PCC M-10 grade (nominal mix) using 20 mm graded stone aggregate as in coping, haunching etc complete.
M&L for PCC M-7.5 grade (nominal mix) using 40mm graded agg as in bed to drain pipes including forming cradles for 150mm pipe.
M&L on site Hume pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC M-7.5 grade below foundation, vent shaft, connection etc, complete for 10 users, conventional type. Complete all as shown on drawing No TD No CEPZ/91/TD/47M Sheet 1/1
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 495 mm x 420 mm bowl size 410 mm x 330 x 160 mm all as specified and directed.
S&F plate rack made of stainless steel 1mm thick and overall size 750mm x 600mm x 250mm securing with nails or screw in wall of any description complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of walls, floors, etc.
M & L for point wiring with 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in and including PVC concealed conduit including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete and also making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistanded copper conductor FRLS cable 1100 V grade as earth wire including concealed MS terminal box ISI marked of suitable size / 3 mm thick hylam sheet on MS terminal for housing switch, socket, regulators etc complete for the following:-
One light point controlled by one one switch
One Fan point controlled by one switch
One 5 pin 6 Amps socket outlet on independent board.
One 5 pin 6 Amps socket outlet on same board.
S & F switch piano type 230 Volts single pole one way 6 Amps all as specified and directed by Engr-in-Charge.
S & F switch socket outlet 230Volts 5 Pin 6 Amps flush type all as specified and directed.
S & F socket outlet 5 pin 6 Amps shuttered flush type all as specified and directed by Engr in charge.
S & F PVC ceiling rose / Angle Holder / Batten Holder surface type three terminals type all as specified and directed by Engr in charge.
Taking down unserviceable conventional fitting and S&F wall mounted high quality indoor batten LED tube light with PVC housing, LED tube rod 20 Watt with T-8 LED Batten type with integral electronic driver 20 W, colour temprature 6500 K (4'), operating lifte 50000 hrs, lumen 1800-3000, diffused connecting with three core flexible copper wire from connector to ceiling rose/ Angle Holder as per existing site requirement as directed by Engineer in charge.
M & L for sub main wiring but using two single core muiltistranded PVC insulated copper conductor FRLS cable of size 4 sqmm 1100 volt grade drawn into PVC concealed conduit including 4 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling / cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface, including taking down the existing u/s submain wiring complete all as specified and directed by Engineer in Charge. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth cable and one run of PVC conduit shall be measured as one unit length.
S & F distribution board factory made SPN 8 way in 240 Volt, double door metal type suitable for fixing MCBs as out going and including SPN MCB 32 Amps as main incoming all as specified & Directed. Note: cost of MCBs will be measured and paid seperately, but including taking down the existing unserviceable DB, making suitable cutting in walls & matching with adjacent surfaces complete all as directed by Engineer in Charge.
S & F MCB DP 32 Amps 'B' series 10 KA with two positin DIN Rail clamp including taking down the existing unserviceable MCB DP complete all as specified and directed by Engineer in charge.
S & F MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN rail clamp including taking down the existing u/s MCB SP complete all as specified and directed by Engineer in charge.
S & F PVC blank plate suitable for MCB DB complete all as specified and directed by Engineer-in-charge.
Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.
M & L for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried inground or drawn inconduit/ pipe or fixed to poles or any other indicated suituation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire, including taking down the existing u/s earth continuity conductor complete all as specified and directed by Engineer-in-charge.
Supply and fixing LED lights fitting 1x20W, 220V AC decorative box type, holder including Led tube rod connecting up wit three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engineer-in-charge.
S & F LED light fiting mirror type with high output diffuser 2 feet, 10 Watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F LED street light fitting 35 Watt 230 V AC outdoor type with pressure die cast aluminim hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistance including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and Fixing distribution board factory made SPN 4 way in, 240 Volt, Double door metal type suitable provision for fixing MCBs as out going and factory made sunken to wall including make good MCB TPN 40 Amps as main incoming all as specified & directed. Note: MCBs shall be measured and paid seperately under relevant item of this BOQ.
Supply and Fixing Amp rating 240 V, 10KA 'C' curve miniature circuit breaker (MCB) of current carrying capacity SPN 32 Amp in the MCB DB complete with connecting testing and commissioning complete all as specified & directed.
Supply and Fixing Amp rating 240 V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp in the MCB DB complete with connecting testing and commissioning. complete all as specified & directed.
Supply and laying reinforced precast concrete cable cover class LV, type 2, flat of size 250mm x 150mm x 40mm size for cable protection.
Supply and laying GI tubing light grade 40mm bore, ISI marked, for cable protection in trenches/ walls all as specified and as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core. Complete all as specified and directed by Engineer-in-charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core. Complete all as specified and directed by Engineer-in-charge.
Supplying & laying in trenches 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 conforming to IS 1239 (Part-2): 2011 complete all as specified and directed by Engr-in-Charge.
Cutting existing GI pipes 25 mm including threading as required and insertaion of after taking down old existing GI pipes 25mm in position including excavation relaying and filling and relaying, rofilling the same complete all as specified and directed by Engr-in-charge
M&L for distrubtion board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection. Triple pole and neutral 415 V, flush to wall complete including taking down old one all as specified and directed by Engr-in-Charge.
M&L for triple pole & neutral 415 V 'C' curve 10 KA 63 Amps capacity IP 20 complete all as specified and directed.
M&L for riddle earth cushioning to under ground cable in trenches/ existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling running.
M&L for single pole 6 Amps 240 Volts 'B' curve 6 KA IP 20 complete all as specified and directed.
M&L for submain wiring in PVC conduit with two runs 2.5sq mm and one runs of 2.5 sqmm for earth continuity1100 volt grade PVC insulated unsheathed FRLS grade copper conductor cable single core multistandard ISI marked (IS 694) drawn through and including 1.5 sqmm PVC rigid conduit heavy grade ISI maked (IS 9537 Part III ) including accessories such as bends, support etc complete including taking down existing submain wiring all as specified and directed by Engr-in-Charge. Note : Two runs of 2.5 Sqmm PVC cable and one run of 2.5 Sqmm earth cable 1 run of PVC conduit shall be measured as one unit length.
Supply and fix Gunmetal Gate Valve (Brass insert) of 25 mm dia complete all as specified and directed by Engineer-in-charge.
s.k.engineers
Aishwarya Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .