Estimate for Repairing and Renovation of Kothi No 10 under Sub Divisional officer of Rajasthan Feeder Mechanical Sub Division, WRD Ferozepur

Finishing walls with cement based soluble exterior paint such as snowecem, robbiacem etc. on old work one coat to give an even shade

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats on old distempered work when shade is changed

Scraping White wash and colour wash

Repairs to plaster in patches of Area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to thedumping ground within 50 metres lead With cement mortar 1:4 (1 cement: 4 sand) Taking area 2.5 sqm

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications

Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Factory manufactured Solid door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position 35mm Thick

Cost of aluminum fittings complete for doors, windows such as tower bolts, handIes,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300mm x 16mm