Renovation of Seed Test Laboratory and Quality Control (Fertilizer First Floor) Laboratory in Campus of Krishi Bhawan Kanke Road, Ranchi

Amount

Dismantling patent stone floor including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75 A brick work in C.M. (1: 4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

waterproofing for old land new roof slab providing and laying water proofing treatment on roof slab by applying two component factory designed ready to use acrylic modified flexible materials applied with brush,roller or spray for water proofing coating as per manufacturer specification with foolwing items. a)surface prepaation-providing and cleaning of concrete surface to remove dust oil grease including removal of existing loose paint/coating and cement (b)Ist coat-Applying Ist coat of two compnent acrylic modified ready to use flexible component mataerials on surface salurated dry roof and side wall of parapet wall upto 600mm by brush or roller after Ist coat of application 45 grm of Fibre glass cloth to lay when the first layersis-do- will be maseured.(C) 2nd coat to apply the 2nd coat of two compounent anylic modified ready use-do-(d)Protection of treapled surface with PCC-The treated surfaace should be covred with 25mm to 50mm PCC of M20 grade(1:1.5:3) with proper slope(1:120) towards the rain outlet in of 2mtx2mt keeping 6mm gap between the paned joint-do-(e) Grgove of PCC surface should be filled with polysulphide -do-all complete job as per direction of E/I.

covering of trreated surface with P.C,C .Providng 50mm thick cemet concrete M20(1:1.5:3)maintaing slope in alternate 2mtx2mt panels with approved quality of stone chips of 20mm to 6mm sizie graded and cleaned sand of F.M 2.5 to3 includig screening,shuttering and mixing cement concretein mixer with admixture of integral water proffing and placing in position,skirting curing,taxes and royalty all complete as per buidings specification and direction of e/I.panels that has been left should be casted next day.there should be 6mm gap between panels Brand sika plastocrate plus,MYK proof WP 10,FOSROC CONPLASTX421 ICX dR.fIXIT PIDIPROOF lW+-do-all complete job(old surface)

Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .

Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. completeHot finished welded type tubes

Supplying of M.S Plate 10mm thick including all complete job as per direction of E/I.

Supplying, fitting and fixing 20mm dia M.S. Bar 1 meter long holding down bolt with nuts washers 100 X100 X6mm plate fitted and fixed with cement concrete (1:24) as per approved design all complete as per building specification and direction of E/I.

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required.

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns.using self driling/selftapping screws complee Ridges plain(500-600mm)

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18microns.using self driling/selftapping screws complee Gutter (600mm over all girth)

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture spintone cosmos / Hexa or equivalent of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33

mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture (Spintone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T section shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing alumiunum work for door ,windows ,ventilators and partitions with extruded built up standard tubular sections, appropriate z sections and other sections of approved make conforming to IS:733 and IS:1285,fixed with dash fasteners of required dia and size including necessary filling up the gaps at junctions,i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight ,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling C.P. brass/stainless steel screws .all complete as per architectural drawings and the directions of Engineer-in-charge.Glazing and paneling to be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 4.0mm thickness(weight not less than 10kg/sqm)

Providing and fixing glazing in aluminium door, windows ,ventilator shutters and partitions etc with EPDM rubber/neoprene gasket etc complete as per the architectural drawings and the directions of E/I.(cost of aluminium snap beading shall be paid in basic item) with float glass panes of 5.0mm thickness(weight not less than 12.50kg/sqm)

Providing and fixing in 12mm thick prelaminataed particle boaard flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I type II,in panelling fixed in aluminium doors,windows shutters and kpartiton frames with C.P.brass/stainless steel screws etc complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both side and balancing lamination on other side .

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Supplying, fitting and fixing 32mm , thick good quality well dressed and well seasoned sal wood fully paneled shutter in doors and window with 20mm, thick panels with one side plain and other side chamfered with aluminium fittings such as hinges, sliding door, bolts, tower bolts, handled or rings, hooks and eyes, cleats, sand blocks as per schedule, taxes and royalty all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Supplying fitting and fixing M.S.Grill made of 20x6mm M.S.flat as per approved design and drawing properly fabricated with joints continous fillet welded and finished smooth carriage of grill to work site,hoisting as per building specification and direction of E/I(where materials to not supplied by the deptt)

Providing two coats of synthetic enamel paint over a coat of red oxidized paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over old wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly , scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Extra for cleaning the old surface by scrapping the entire old white wash or colour wash including cost of scaffolding all complete as per direction of E/I.

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer,over the plastered wall suface to prrepare the surface even and smooth complete.job as per direction of E/I.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.

Providing &Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone patter with anti algae and Uv resistace properties to be aapplied as intermediate fiish in desired pattern @ 43.04 kg/s10 sqm to form film of 1-1.15mm thickess after scrapping and propperly cleanig the surace to remove loose particles from the plaster surface,followed by top coating with premium acrylic smooth exterior paint with silicoe additives of required shade by two or more cots @ 1.43 litre/10sqm,complete as the direction of E/I.

providing Tor steel reinforcement of 10mm,12mm,16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.(10mm dia )

Centering and shuttering including strutting, propping etc. and removal of form forSuspended floors, roofs, landings, balconies and access platform

Providing 150mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Taking down C.A. Of G.C.I. Sheet in roofs with ridges including stacking the serviceable materials within 15M. Lead and disposal of unserviceable materials with all leads as per direction of E/I.

Providing 12mm thick water proof cement plaster(1:3)with clean coaorse sand F.M 1.5with integrfal waater proofing compound liquid @125ml per bag cement inclujding screening,curing with all leads and lift of water ,scaffolding as peer building specification and direction of E/I. Brand-Sika,plastocrate plush,MYK proof WP 10,Fosrroc-conplastx4211C.Dr Fixit pidiipoof LW+or equivalent.

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.

With "A" grade white 15X15cm Tiles.

Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms, vanity counters facials and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4(1 cement:4 coarse sand) with joints treated with white cement ,mixed with matching pigment, epoxy touch ups ,including rubbing, curing etc. complete at all levels.(Green marble)

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.

Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mmthick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointingwith white cement mortar 1:2 (1 white cement : 2 marble dust) with anadmixture of pigment to match the marble shade (To be secured to thebacking by means of cramps, which shall be paid for separately) Raj Nagar plain white marble/udaipur green marble/zebra black marble(area of slab over 0.50 sqm)

Providing edge moulding to 18mm thick marble stone counters venities etc.including maching polishing to edge to give hight gloss finish etc complete as per design approved by E/I.Marble work

Providing and laying rectified glazed ceramic wall tiles300x300mm (thickness to be specified by the manufacturer) of Ist quality conforming to IS:15622 of approved make in colours such as white,Ivory,Grey,Fume,Red Brown ,laid on 20mm thick bed of cement mortar 1:4(1cement:4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion(i)single socketed pipes.

110mm diameter

Carriage of materials from nearest approved sources of supply including loading into trucks and unloading from trucks and stacking properly at work site as directed by the E/I.

sand lead 8K.M.

chips lead 22K.M.

Brick lead 8K.M(1K+7P)

Wiring for light/fan point/exhaust fan point/call bell Point with 1.5 sq.mm FRPVC insulated copper Conductor single core cable in surface/recessed PVC conduct with Modular type switchmodular plate, Suitable size G.I Box etc. as required.

group C

Wiring for light / Power plug with 2×4 sq mm FRPVC in insulated copper conductor single core cable in surface / recessed PVC conduit along with 1 nos 4 sqmm. FR PVC insulated copper conductor single core cable for loop earthing as required .

Wiring for circuit/submain wiring along with wiring with the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5sqmm+1x1.5sqmm earth wire

2x2.5sqmm+1x2.5sqmm earth wire

4x6sqmm+2x6.0sqmm earth wire

Supplying anf dixing of following sizie of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

S/F Modular type switch/socket supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connections but excluding modular plaate etc as reqd.

5/6 Amps 3pin 5/6 Amp socket

5/6 amps,3 socket outlet

S/F Modular boxes,base &cover plate: Supplying and fixing following size/Modules G.I.Box along with modular base & cover plate for modular switches in recess etc as required.

1 OR 2 MOODULE (78MMX78MMX45MM)

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 6 pin 15/16 Amp socket outlet and 15/16 amp. Piano type switch connection as painting etc. as req.

S/F Suitable size G.I.Box on surface/Recess with suitable size ofr phenolic laminated sheet cover in front including providing 3pin 5/6 Amp socket outlet and 5/6 amp. Piano type switch connection as painting etc. as req.

S/F 2 Pin 5 Amp ceiling rose on the existing junction Box wooden block incuidng connection etc as reqd

S/F Brass batton / Angle Holder including connection etc as reqd

S/F the following way SP & N sheet steel M.C.B. D.B. 240 V on surface/recess complete with tinned copper busbar neutral bus bar earth plate dinbar hinged front acrylic cover from MCB knob datachable gland plate inter connection phosphatied and powder painted including earthing etc as required ( without MCB/RCCB/Insolator)

8 way double door

S/F”C” series SPMCB: supplying and fixing 6 amps to 32amps rating,240 volts ,10KA,"C" curve, ,miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections ,testing and commissioning etc as required.

6/32 amps , single pole

40 amps,DP

6/32 amps,TPN

Earthing with copper earth plate 600mmx600mm x3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc as reqd(But without charcoal or coke and salt)

S/F 8 SWG copper wire at 0.50 meter below ground level for conductor earth electrode including soldering etc. as reqd.

Providing and fixing G.I.tape 20mmx3mm thick on parapet or surface of wall for lighning conductor complete as requied(for Horizontal run)

S.I.T.C of floowing rating recess/surface mounted LED round/square shape down light Luminarie with prfessurfe die cast housing for single phase supply voltaage .Luminarie shall be confirm to IS:10322 Part 5/section-2 or JEC:62722 with all neccssary accessories as required

6/7 W LED Round Down light

15/16 W LED Square Down light

S.I.T.C of floowing rating surface mounted LED tube light fitting suitable for 230 V 50Hz,single phase supply etc.complete as required.

20/32 W LED Tube light

Supply of wall mounted Fan 16"(400mm) including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

S/F Modular type electronic fan regularor_Supplying and fixing stepped type fan regulator on the existing modular plate swith box including connections but excluding modulalr plate etcas required.

I.T.C of ceiling fan including wiring the down rods of standard length(up to30cm) with 1.5 sqmFRPVC with1.5sqmmFRPVCinsulated copper conductor single core cable etc as reqd.

I.T.C.of exhaust Fan up to 450mm sweep in the existing 0pening including making the hole to suit the size of the above fan making good the damage connection testing commissioning etc. as reqd.

Supply of ceiling ceiling Fan 56"(1400mm) BLDC 5 STAR IS 374:2020 including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

Supply of metal Exaust Fan 12"(300mm) including all complete job as per direction of E/I.make Bajaj/crompton/Havells.)

S/F the following way SP & N sheet steel M.C.B. D.B. 240 V on surface/recess complete with tinned copper busbar neutral bus bar earth plate dinbar hinged front acrylic cover from MCB knob datachable gland plate inter connection phosphatied and powder painted including earthing etc as required ( without MCB/RCCB/Insolator)

4 way, single door

Supplying and faixing Following rating,double pole 240 Volts isolator in the existing MCD DB complete with connection testing and commissioning etc as reqd

Providing and fixing following DP/TP&N sheet metal switch disconnector fuse unit in the existing metal board with rewireable type fuses,including drilling holes in metal board ,making connections etc. as rrequired.

63 amps,double pole

S/F following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following,capacity complete with all accessories including connection,earthing the body etc as reqd..

Supply and fixing LED DOUW LIGHT 15/16 watt including all complete job as per direction of E/I.

Supply and fixing 9/10 watt LED Bulb including all complete job as per direction of E/I.

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

N K Enterprises