REPAIR / MAINT TO BALCONIES, FLOORING, PLASTERING, JOINERY AND ALLIED WORKS IN SINGLE SC JC ACCN AT AWC UNDER GE (AWC) MHOW.

Amount

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, at any description and height etc. and removing of the rubbish, complete all as specified and as directed.

M & L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4, mixed with water proofing compound, surface finished even and smooth, complete all as specified and as directed. Note:- Supply Only WPC compound shall be measured and paid separately.

M & L 10 mm thick rendering in cement mortar 1:6 on brick work or concrete surface, surface finished even and fair, complete all as specified and as directed.

Complete removal of existing treatment from plastered wall surfaces, complete all as specified and as directed.

M&L1mm thick wall care putty on wall complete all as per manufracturer instructions, complete all as specified and as directed.

M & L for applying one coat of oil bound distemper over a coat of primer on old prepared of wall surfaces of internal wall all as per specified and directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared newly plastered surfaces of internal wall all as per specified and directed.

M&L preparation of new plastered / unplastered surfaces of walls and applying two coats of cement base paint , white or tinted including and washing floors, etc. , of drops and splashes, complete all as specified and as directed.

M&L two coats of exterior emulsion paint ( Apex or weather coat) with putty, white or tinted on old surfaces of walls including prepration of old surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes, complete all as specified and as directed.

M&L Rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters ; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-290( Gde-E-165) including dismantling of wrought iron or mild steel work of any description, complete all as specified and as directed.

S & F Framed work as in grills for balcony, of MS tube for top rail and MS square bars for as guard bars, or rolled section as in sunshade, side supports or any situation of work etc, revited or forged in to spikes and similar work conforming to Fe 290. Gde-E-165 including dismantling of wrought iron or mild steel work of any description, complete all as specified and as directed.

S&F Pre-painted galvalume( hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side) , Zincalume (steel) based corrugated/plain sheet 0.50mm thick ,of an approved colour, having tensile strength of 550 Mpa, and finished with resin coat on both surfaces as in roof covering/ cladding to wall,including flashings , ridges, valley etc fixed with self tapping screws including dismantling Plain or corrugated AC Sheet, any guage, thickness, including nainital or similar pattern roof coverings, complete all as specified and as directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer, complete all as specified and as directed.

M&L preparation of old painted surfaces of wooden /wood based materials of any description , not otherwise described ,over 10 cm width or girth and applying one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all dropings, complete all as specified and as directed.

M&L preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops etc., complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavigns not exc.15 cm thickness. (Below or abve ground level), complete all as specified and as directed.

M&L 75mm thick PCC type C-2 (1:3:6) (using40 mm graded crushed stone aggregate as in plinth protection laid in panels, finished even and fair, complete all as specified and as directed.

M & L non-skid / mat finish coloured joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match also in patches over and including 15 mm thick screed in cement mortar 1:4 including dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing and rubbish off the premises, complete all as specified and directed.

Material and labour Non-skid coloured Ceramic tiles 7 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in on vertical surfaces as in dados,skirting etc, set & jointed in neat cement slury over and including 10 mm thick bedding layer of cement (1:4) pointed with white/coloured cement to match including dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing and rubbish off the premises, complete all as specified and directed.

M&L glazed ceramic Coloured tiles, 300mmx200mmx6.5mm / 300x450x7mm thick, on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match also in patches complete over & including 10mm thick screeding in CM 1:4 including dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing and rubbish off the premises, complete all as specified and directed.

M&L Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 including dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing and rubbish off the premises, complete all as specified and directed.

M&L Vitrified Ceramic tiles (light shade) 10 mm thick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, on vertical surfaces as in dados,skirting etc, set & jointed in neat cement slury over and including 10 mm thick bedding layer of cement (1:4) pointed with white/coloured cement to match including dismantling floor, hearth or wall tiling also in patches including cement mortar bedding ( but not backing ), removing and rubbish off the premises, complete all as specified and directed.

M&L 18-20 mm thick Granite stone slab of approved colour ( of any type) work ( table rubbed and polished to mirror finish ) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons etc, complete all as specified and directed.

M&L Machine cut kota slab flooring 20-25 mm thick over & including 15 mm thick screed bed of CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons etc, complete all as specified and directed.

M&L Machine cut kota slab flooring 20-25 mm thick in riser of steps, skirting, dado and piller laid over & including rendering of CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of stone slabs laid bedded and pointed in cement mortar , of any description or thickness in floors, aprons etc, complete all as specified and directed.

M&L for bullnosing / rounding to exposed edges of stone slab ( any type) and polishing to match the adjoining surfaces, complete all as specified and directed.

S&F 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with oil putty at any height in portion (part) including hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm, complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type in squares not exceeding 0.50 sq.m. in each pane , fixed with oil putty at any height in portion (part) including hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm, complete all as specified and directed.

M&L welding for repairs to doors/ windows/ventilators etc. n.exc 2.5 cm in length, thickness of metal to be welded not exc 6 mm, complete all as specified and directed. Note:- Taking down the article and refixing in position after welding shall be measured separately.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each, complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces, complete all as specified and directed.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames), complete all as specified and directed.

M&L 2nd Class Hard wood ( Sal) Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed, complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification, complete all as specified and directed.

S&F 2nd class HW rail and style ,35 mm thick Factory made plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS:1003 (Part I), complete all as specified and directed.

M&L 35 mm thick factory made door shutters made out of second Class soft Wood , Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. ( without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass/gauze, complete all as specified and directed.

M&L preparation of new wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying Two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

S&F only galvanised mild steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or, complete all as specified and directed.

S&F butt hinges aluminium anodised in 100mm size, complete all as specified and directed.

S&F butt Hinges, medium weight, cold rolled mild steel, 100 mm size, ISI marked, complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt, ISI marked, complete all as specified and directed.

S&F Aluminium handles, cast type anodised 'D' shaped , 150mm long ISI , complete all as specified and directed.

S & F aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed, complete all as specified and directed.

S & F 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed, complete all as specified and directed.

M&L ( in repairs) 18 mm thick Prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws as in shutters of Cup Boards complete with Wooden beads of size 18mm x 6mm around edges and its varnishing / french polishing, complete all as specified and directed.

S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm, complete all as specified and directed.

S&F 100 mm size Hasp and staple , safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs, complete all as specified and directed.

S&F in repairs Door seal of superior quality made out of aluminium anodised ( 20mmx1.5mm strips) materials and fixed to door shutters and CP MS screws 25 mm long, complete all as specified and directed.

S&F in repairs corner glass shelf 250mm (10'') long complete as per sample approved by Engineer in charge, complete all as specified and directed.

S & F in repair shelf in long size fixed with and including chromium plated brass screws and wooden/plastic cleats.( Min wt 300gms), complete all as specified and directed.

S&F in repairs powder coated steel peg set having 06 Nos pegs fixed to wall with CP Mild steel screws and PVC rawl plugs, complete all as specified and directed.

S&F in repairs 25 mm dia fancy type drapery curtain rod made of Aluminium duly PVC sleeved with a pair of brackets and finial and fixed, complete all as specified and directed.

S&F in repairs Stainless steel sink with draining board , made out of 1.00 mm thick sheet (ISI Marked) for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx 330mmx160mm, complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., and coloured Plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete fixed, complete all as specified and directed.

S&F in repair PVC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices, complete all as specified and directed.

S&F ( in repairs) Low level flushing cistern, moulded from virgin poly propylene including provision of 32 mm dia PVC flush pipe and making connections, complete all as specified and directed.

S&F in repair vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm including CI cantilever brackets, 32 mm dia brass Chromium plated waste fittings with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps, complete all as specified and directed.

Supply only 15 mm dia pillar tap with swan neck brass chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shank and fly nuts, complete all as specified and directed.

S&F in repair Pillar taps,swan neck with long thread fancy type cast copper alloy, with capstan heads, chromium plated, screwed down for 15 mm bore pipe, high pressure with long screwed shanks and fly-nuts , screwed for iron pipe, complete all as specified and directed.

S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore Cast copper alloy Chromium plated Angle stop cock ( one way) long thread with wall flange , screwed down , high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed, complete all as specified and directed.

S&F in repairs CP Angle stop cock ( two way), screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle, screwed externally both ends for unions etc. and fixed, complete all as specified and directed.

S&F in repairs Bidet spray ( Health faucet) with 1 metre extendable metal tube and holder, complete all as specified and directed.

S & F in repair brass chromium plated shower rose with shower arms with swivel joints including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair Chromium plated fancy long body Bib taps, cast copper alloy, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repair 15 mm bore dia cp bib tap with long thread cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe .

S&F in repair CP towel Rail Square with Round Flange, complete all as specified and directed.

M & L in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150mm, complete all as specified and directed.

S&F in repair CP Toilet paper holder, complete all as specified and directed.

S&F in repairs 20 mm ball brass valves high pressure with polythelene float and fly nuts complete scrued for iron pipe or brass ferrule, complete all as specified and directed.

Cleaning of water storage tanks and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc, exc 250 & n. exc 500 ltr capacity, complete all as specified and directed.

Description same as per Item No- 74.00 above but Exc 500 & n. exc 1000 ltr capacity, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches, complete all as specified and directed.

Description same as per Item No- 76.00 above but fixed to wall, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber joints fixed to walls, complete all as specified and directed.

S & F in repair PVC bend 110mm, complete all as specified and directed.

Description same as per Item No- 79.00 above but for 75 mm bend, complete all as specified and directed.

S & F in repair low density polythelene PVC waste pipe 32mm bore and 1 m long for wash basin/sink, complete all as specified and directed.

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of tank., all as specified in SSR part I-2020and removing from site, complete all as specified and directed.

S & F in repair PVC bath cabinet box type with shutter, complete all as specified and directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement, complete all as specified and directed.

S & F in repairs PVC connection 15 mm bore 600 mm long with PTMT nuts at both ends, complete all as specified and directed.

Supplying, fixing, 15mm bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors including Taking up or down existing steel tubing and connection and removing, complete all as specified and directed.

Supplying, fixing, 20 mm bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors including Taking up or down existing steel tubing and connection and removing, complete all as specified and directed.

M&L fly ash brick work with modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar, complete all as specified and directed.

M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height, complete all as specified and directed. Note : - Cost of formwork and welded mesh shall be deemed to be included.

Supply only water proofing compound, complete all as specified and directed.

S&F powder coated aluminium sliding glazed windows with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required, complete all as specified and directed. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick. (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick. (iv) 4 mm thick tinted glass superior quality. (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos. (vii) Sliding rollers per shutter - 02 Nos. (viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos

S&F powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jambs all around in CM 1:3 finishing even and smooth, complete all as specified and directed.

S&F in repair factory made PVC side laminated shelf /partition of required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf /partition and shall provided 3 edges in size 18mm x 18mm as per required length the front side of the edge visible in the front of the shelf / partition to be edge lipped by 18mm width x 1mm thick PVC Sheet of density 600 Kg/Cum manufactured by ISO 9001 - 2015 Cerfified campany , using solvent cement etc, complete all as specified and directed.

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete including removal of existing treatment. (i) Surface prepration like opening the cracks/removal of loose concerete. (ii) Pressure washing the entire roof to remove dirt , dust alage fungi or other contaminants from joints and entire surface. (iii) Saturation of surface nano technology based deep penetrating sealer application to block pores , capillaries and micro cracks. (iv) Filling the crack with flexible polymer based caulk and further sealing with reinforcement fabric elastomeric coating. (v) Sealing joints and coving area with flexi reinforcement fabric and elastomeric coating. (vi) Priming coat of dr fixit URP (vii) First and Second coat of elastomeric dr fixit Roof Seal . The authorized applicators are under :- (i) P Tech Solutions 92 Anurag Nagar Ring Road Indore (II) MR clean Ventures E-4/402 Arera Colony Bhopal 462016 (iii) Property care, 244 D scheme No 71 Near Shriji Vatika indore 452002 Note : A warranty of 10 years be provided by the contractor for the service rendered.

ram prashad chotelal batham

GIRIRAJ CONSTRUCTION AND TRADERS

Jamna Constructions

M/S GARG CONSTRUCTION

M/S Ashish Construction

PREMCHAND BHAWANI SAHAI