Loading
Loading…
Loading…
Tender Value
₹5.9 Cr
EMD Value
₹11.8 L
Closing Date
18 Jun 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
+ Capital Works)
S AND T
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB of SGCC, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (1)In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing.
Defination of Similar Work :- "Trenching cable laying location and signal foundation/erection/termination/wiring in connection with any signaling work." OR "Any indoor or combined Indoor/ Outdoor Signaling work including Supply, Installation, Testing and commissioning of Relay Interlocking (RRI/PI) system for passenger carrying lines".
6 conditions · 4 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The bid must comply technical conditions of tender.
Provision of additional stabling lines for handling Kumbh Mela traffic in 2027 at Kherwadi, Kasbe Sukene, Nashik Road and Development of examination and maintenance facilities for NMG/ NMGH/ NMGHS rakes at Devlali Station on Bhusawal Division of Central Railway.
BSL-N-SNT-06-2026-27~CR
BSL-N-SNT-06-2026-27
Open
Works - General
3 Months
Jalgaon, Maharashtra
₹0
₹11.8 L
18 Jun 2026
26 May 2026
4 Jun 2026
327 items across 4 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,77,11,132.72 | ||
| — | 3.00 | — | — | ||
| Supply of Relay Rack Assembly complete with scaffolding, fixtures and accessories including MS Bars for fixing of relay plug board, string rods, fuse strips with bracket, 11 Way Bus Bars with cover and mounting brackets, runway for cable/wires, frame, base assembly etc. Siemens type & as per extant practice on C. Rly. Typical part list and Rack arrangement as per Sketch no SK- 727 and Rack plan as approved by Engineer incharge. (Inspection by Consignee) | — | — | — | 94,666.8 | |
| — | 3.00 | — | — | ||
| Supply of Main Cable Termination rack complete with scaffolding, fixtures & accessories including square bars for mounting 8-way terminal blocks, ladder, string rods, frame, base assembly, insulators, J bolt, nut/bolts & fasteners, backelite sheet, etc. Siemens type and as per extant practice on Central Railway. Typical part list and rack arrangement shall be as per sketch No. SK-727 with latest alterations. (Inspection by Consignee) | — | — | — | 81,534.41 | |
| — | 6.00 | — | — | ||
| Supply of Indoor Jumper Wire of various colour as per Railways standard practice of type ATC 1 x 0.6 mm dia.conforming to IRS 76/89 (Amdt 3) or latest.(Inspection by Consignee) | — | — | — | 46,381.13 | |
| — | 3.00 | — | — | ||
| Supply of Indoor Jumper Wire ATC 1 x 1 mm dia. conforming to IRS 76/89 (Amdt 3) or latest. (Inspection by Consignee) | — | — | — | 35,112.95 | |
| — | 6.00 | — | — | ||
| Supply of PVC Flexible Copper Cable, Single core, multi strand 1x2.5 sq mm(50 conductor each dia 0.25 + /- 0.01) as per specn IS 694/2010 with latest amendment. If any with insulation thickness of 0.70 mm nominal conductor resistance 7.98 ohms /km and test parameters are as per IRS (S)76/89 (Amdt .3). (Inspection by RDSO) | — | — | — | 2,39,077.04 | |
| — | 3.00 | — | — | ||
| Supply of PVC Flexible Copper Cable, Single core, multi strand 1x6 sq mm(84 conductor each dia 0.30 + /- 0.01) as per specn IS 694/2010 with latest amendment. If any with insulation thickness of 0.80 mm nominal conductor resistance 3.30 ohms /km and test parameters are as per IRS (S)76/89 (Amdt .3). (Inspection by RDSO) | — | — | — | 2,45,690.14 | |
| — | 3.00 | — | — | ||
| Supply of PVC Flexible Copper Cable, Single core, multi strand 1x10 sq mm(80 conductor each dia 0.40 + /- 0.01) as per specn IS 694/2010 with latest amendment. If any with insulation thickness of 1.00 mm nominal conductor resistance 1.91 ohms /km and test parameters are as per IRS (S)76/89 (Amdt .3). (Inspection by RDSO) | — | — | — | 3,78,278.72 | |
| — | 1.80 | — | — | ||
| Supply of PVC Flexible Copper Cable, Single core, multi strand 1x16 sq mm(126 conductor each dia 0.40 + /- 0.01) as per specn IS 2465/1984 & IS:694/2010 with latest amendment. If any with insulation thickness of 1.00 mm nominal conductor resistance 1.121 ohms /km and test parameters are as perIRS (S)76/89 (Amdt .3).(Inspection by RDSO) | — | — | — | 3,37,778.83 | |
| — | 1.20 | — | — | ||
| Supply of PVC Flexible Copper Cable, Single core, multi strand 1x25 sq mm(196 conductor each dia 0.40 + /- 0.01) as per specn IS 2465/1984 & IS:694/2010 with latest amendment. If any with insulation thickness of 1.2 mm nominal conductor resistance 0.780 ohms /km and test parameters are as per IRS (S)76/89 (Amdt .3). (Inspection by RDSO) | — | — | — | 3,49,925.88 | |
| — | 6.00 | — | — | ||
| Supply of wire 16/0.2(blue,red,gray,yellow,brown,black,white as per site engineer instruction)finolex/polycab/delton make.IRS:S-76/89(Amd.3),BS:4808 Part-2.Wire to be procured from RDSO approved vendor (Inspection by Consignee) | — | — | — | 34,568.02 | |
| — | 130.00 | — | — | ||
| Supply of low maintenance Lead Acid Secondary Cells 2V 80 AH. As per specn. IRS 88/2004 with latest amendment (Inspection by RDSO) | — | — | — | 2,32,083.97 | |
| — | 310.00 | — | — | ||
| Supply of Rubber Mat 5 mm thick for use in signalling installation.(Inspection by Consignee) | — | — | — | 35,893.93 | |
| — | 26.00 | — | — | ||
| Supply of Key Lock Relay with different ward combinations (three extra set of ward plate for Point Machine to be supplied with each relay). Siemens Make working on 60V DC/24 DC or functional equivalent without base plates. RDSO/SPN/219/2016 Version 1.0 d 1. (Inspection by RDSO) | — | — | — | 2,12,564.22 | |
| — | 15.00 | — | — | ||
| Supply of QNA1 AC immunized relay 8F-8B,24VDC along with plug board, retaining clip and connectors conforming to BRS:931A,IRS:S60,IRS:S34 & IRS:S23 . (Inspection by RDSO) | — | — | — | 51,654.23 | |
| — | 38.00 | — | — | ||
| Supply of QSPA1relay, 24VDC,Slow to pick up, 8F.4B along with plug board, retaining clip and connectors conforming to BRS:933A,IRS:S60,IRS:S34 & IRS:S23.(Inspection by RDSO) | — | — | — | 1,49,967.23 | |
| — | 28.00 | — | — | ||
| Supply of QTA2 AC immunised track relay, 9 Ohm,2F.1B, along with plug board,retaining clip and connectors conforming to BRS:939A, 966, & appendix F2, IRS:S34& IRS:S23(Inspection by RDSO) | — | — | — | 96,608.21 | |
| — | 10.00 | — | — | ||
| "Supply of QBAT track Relay, AC immunised, 2F-2B contacts, 9 ohms. complete with plug board, retaining clip & connectors as per RDSO / SPN/84 ver 2.0 or latest. (Inspection by RDSO)" | — | — | — | 59,031.28 | |
| — | 60.00 | — | — | ||
| "Supply of Universal LED Lamp proving relay QECX61 relay, 4F-4B,AC conforming to BRS:941A STS/E/RELAYS/AC LIT LED SIGNAL/09-2002 ,Amdt.-1 (FOR ALL ASPECT ECR FOR AC LED SIGNAL) (Inspection by RDSO)" | — | — | — | 1,99,735.16 | |
| — | 29.00 | — | — | ||
| "Supply of QBCA1 AC immunised relay, 2FHD 4F-4B,24VDC along with plug board,retaining clip and connectors conforming to BRS:943 POINT CONTACTOR RELAY. And IRS S46. & firms specification. (Inspection by RDSO)" | — | — | — | 1,22,791.5 | |
| — | 29.00 | — | — | ||
| Supply of QL 1 LATCH relay, 11 F-4B or 8F-6B along with plug board , retaining clip and connectors conforming to BRS:935A (Inspection by RDSO) | — | — | — | 1,22,791.5 | |
| — | 135.00 | — | — | ||
| Supply of QNA1K relay 1000 ohm,6F/6B 24V DC as per BRS :931A, IRS:S60, IRS:S34 & IRS:S23 and RDSO spec. STS/ E/ Relays/UEA (PI) dtd.30.05.1997 (Inspection by RDSO) | — | — | — | 5,00,558.88 | |
| — | 3.00 | — | — | ||
| "Supply of Fail Safe Electronic Flasher Device 24V DC or 60V DC as per RDSO spec No.RDSO spec No.RDSO/SPN/173/2002 amendment 2 or latest." (Inspection by RDSO) | — | — | — | 48,177.25 | |
| — | 60.00 | — | — | ||
| Supply of PPTC Fuse GP 30-100 (24V/1.4A)TPR FUSE,FUZETEC,TYCO,BOURN,RAYCHEM etc (Inspection by RDSO) | — | — | — | 459.11 | |
| — | — | — | Make: | ||
| — | 60.00 | — | — | ||
| Supply of PPTC Fuse GP 250-185UL-94 Certifcaion (24V/4A)TPR .Make:LITTLEFUSE,FUZETEC,TYCO,BOURN,RAYCHEM etc(Inspection by RDSO) | — | — | — | 459.11 | |
| — | 6.00 | — | — | ||
| Resin cored wire as per specification No. IS:1921-1975 with Alloying element percentage as 63% SN (Tin) and / 37% Pb (Lead) with percentage of various impurities not exceeding the values Sb (Antimony) 0.2% maximum , Cu (Copper) 0.1% maximum, As (Arsenic) 0.05% maximum, Fe (Iron) 0.02% maximum & other impurities mainly Al, Zn & Cd shall be limited. The flux shall be free from corrosive action as per clause 5.2 & flux percentage may be used as per requirement. (Inspection by Consignee) | — | — | — | 6,718.09 | |
| — | 60.00 | — | — | ||
| Lacing thread rolls, black, wax coated (100 mtrs) (Inspection by Consignee) | — | — | — | 3,547.89 | |
| — | 12.00 | — | — | ||
| Design,fabrication and supply of fuse Auto changeover system for 32 Nos of external non detorating Type fuses of G type fuses from 0.6 A Amp to 4A Amp capacities used in signalling circuits.System shall have 8 cards with monitoring arrangement of 4 fuses in one card.As per RDSO spec.RDSO/SPN/209/2012 Ver.2.0 or latest amendment if any. (NO. OF MODULES=NUMBER) (Inspection by RDSO) | — | — | — | 2,87,051.64 | |
| — | 5.00 | — | — | ||
| Design,fabrication and supply of fuse Auto changeover system for 24 Nos of external non detorating Type fuses of G type fuses from 4 A to 10 Amp capacities generally used for point operation circuits.System shall have 6 cards with monitoring of 4 fuses in one card.As per RDSO spec.RDSO/SPN/209/2012 Ver.2.0 or latest amendment if any. (NO. OF MODULES=NUMBER) (Inspection by RDSO) | — | — | — | 1,81,074.55 | |
| — | 19.00 | — | — | ||
| Supply of Main Signal Post 140 mm outer dia 4.6 Mtr Length as per spec No IRS S 6/81 with latest amendments. (Inspection by RITES) | — | — | — | 1,18,014.02 | |
| — | 16.00 | — | — | ||
| Supply of Shunt Signal Post with Base (GI Pipe of 80 mm Dia of min. 1 meter length.). (Inspection by RITES) | — | — | — | 38,785.96 | |
| — | 19.00 | — | — | ||
| Supply of Cast Iron Main signal surface base140 mm as per spec No IRS S-10 and Drg No 2011/M with latest amendments, with CLS ladder assembly complete for CLS signal 5.5/4.5/3.5 mtrs long as per R. No SA-23156(Adv),SA 23153(Adv) & SA 23150 (Adv) Alt. 1 respectively with latest Amendment as the case may be for CLS unit & signal back staging as per extant C.Rly practice . (Inspection by RITES) | — | — | — | 1,53,436.4 | |
| — | 20.00 | — | — | ||
| Supply of Cast Iron Shunt signal surface base 80 mm as per spec.No IRS S 10 and Drg No 2011/M with latest amendment,as per RDSO Drg.No SA-23156/Drg.No RST/11413 as per extent C.Rly practice. (Inspection by RITES) | — | — | — | 37,040.36 | |
| — | 39.00 | — | — | ||
| Supply of Signal No.plates. as per Drg No RST-11393/SK 842 (Inspection by Consignee) | — | — | — | 18,187.21 | |
| — | 1.00 | — | — | ||
| OFF set bracket 5-1/2 " to suit 140 mm dia CLS post with two nos. of "U" Bolts with nuts and washer complete as per RDSO Drg No SA-23080 for Signals & Routes (Inspection by Consignee) | — | — | — | 893.67 | |
| — | 15.00 | — | — | ||
| Supply of A/AG/C/P/G/IB Board as per Drg RST-11444/1(A), RDSO Drg No SA 23460(AG), SA 23461( C) , RST-11445 , SA 23456(P), SA 23477(G) & SA 234476-77(IB) as applicable respectively with latest Amendment. (Inspection by Consignee) | — | — | — | 7,532.09 | |
| — | 30.00 | — | — | ||
| Supply of Hand Cuff Locks/ Godrej Navtal lock with three common key (Inspection by Consignee) | — | — | — | 7,675.03 | |
| — | 14.00 | — | — | ||
| Supply of 2 aspect signal unit in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev 2.0 or latest complete to suit LED signals lamps and suitable for 140 mm dia post saves pigment finish on the back side of the and inside . White pigment finish inside the 2 aspect unit to avoid any extra paint cost. (Inspection by RITES) | — | — | — | 3,87,194.34 | |
| — | 5.00 | — | — | ||
| Supply of 3 aspect signal unit in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev 2.0 or latest complete to suit LED signals lamps and suitable for 140 mm dia post saves pigment finish on the back side of the and inside . White pigment finish inside the 4 aspect unit to avoid any extra paint cost. (Inspection by RITES) | — | — | — | 1,41,723.33 | |
| — | 20.00 | — | — | ||
| Supply of Shunt signal position light type FRP complete as per RDSO spn no RDSO/SPN/194/2006/Rev 2.0 or latest with off set bracket 3-1/2" to be fitted on 140 mm post drawing No. SA 23840 (Adv) Alt-2 for dependent type complete with signal unit bracket, terminals etc without lenses,lamp, lamp holder, and to suit LED signal lamp. (Inspection by RITES) | — | — | — | 2,49,402.93 | |
| — | 2.00 | — | — | ||
| Supply of One way Junction route indicator in FRP body without lenses and transformers as per RDSO spn RDSO/SPN/194/2006/Rev.2 .0 or latest complete and to suit LED signal lamp. (Inspection by RITES) | — | — | — | 62,632.53 | |
| — | 1.00 | — | — | ||
| Supply of two way Junction route indicator in FRP body without lenses and transformers as per RDSO spn RDSO/SPN/194/2006/Rev.2 .0 or latest complete and to suit LED signal lamp.(Inspection by RITES) | — | — | — | 39,717.76 | |
| — | 2.00 | — | — | ||
| Supply of "Calling ON" signal unit in FRP body without lenses and transformers as per RDSO Specification RDSO/SPN/194/2006/Rev.2 .0 or latest complete and to suit LED signal lamp. (Inspection by RITES) | — | — | — | 15,499.78 | |
| — | 60.00 | — | — | ||
| Supply of Phenolic 10mm thick sheet, grade P3 in standard size of 1.22X1.22 Mtr as per spec. No IS 2036 of 1995. (Inspection by RITES) | — | — | — | 2,81,604.24 | |
| — | 60.00 | — | — | ||
| Supply of FIBRE GLASS INSULATING FIRE RETARDENT SHEET of 10 mm THICKNESS AS PER ISO:10192-1982,Dielectric strength -25KV/mm with glass content 25 to 34%, in standard size of 1.10x1.10Mtr.as per spec.No.IS:10192-1982 (Inspection by RITES) | — | — | — | 2,84,260.2 | |
| — | 25250.00 | — | — | ||
| Supply of ARA Terminal blocks with links made of PBT Specn No.IRS/75/2006(Rev - 2) with latest amendments and RDSO Drg.No.SA-23741 Alt.4., SA-23745 Alt 5, SA-23746, SA-23748 Alt -4 & SA-23756 Alt-3. (Inspection by RDSO) | — | — | — | 16,38,878.49 | |
| — | 280.00 | — | — | ||
| Supply of cartridge fuse block made of PBT as per RDSO Drg No SA-23748 Alt 4,SA- 23749 & Spec No IRS S 75/2006 with latest amendment. Fuse block shall be suitable for round head type voltage fuses.(Inspection by RDSO) | — | — | — | 40,782.58 | |
| — | 280.00 | — | — | ||
| Supply of round head type non detoriating type low voltage cartridge fuse as per Specn No IRS/S/78/92 with latest amendments 2A/4A/6A capacity(Inspection by RDSO) | — | — | — | 17,552.98 | |
| — | 115.00 | — | — | ||
| Supply of Tik-tak, piano type switches,5 A (As per IS specification).(Inspection by Consignee) | — | — | — | 3,434.5 | |
| — | 63.00 | — | — | ||
| Supply of Apparatus Case with godown locks with deatachable handle on both the doors. i) Single Case as per Drg No SK 783-1&2. with latest alteration. (Inspection by RITES) | — | — | — | 9,02,180.33 | |
| — | 57.00 | — | — | ||
| Supply of Apparatus Case with godown locks with deatachable handle on both the doors. ii) Half Case as per Drg No SK 783-1&2. with latest alteration. (Inspection by RITES) | — | — | — | 6,54,937.81 | |
| — | 134.00 | — | — | ||
| Supply of earth electrode assembly as per Drg.No.CR/S&T/SK/815 (Inspection by Consignee) | — | — | — | 1,29,135.23 | |
| — | 47.00 | — | — | ||
| Maintenance Free Earth As per RDSO/SPN/197/2008 or latest consisting of :1) Copper bond steel electrode 3 Mtr long 17 mm dia with copper bonding thickness of min.250 micron & UL listed & marked -01 No 2) Earth enhancement compound RDSO Approved in sealed bag of 10Kgs-03 No 3) Copper strip 150x25x6 mm -02 No 4) Copper strip 300x25x6 mm -01 No 5)35 Sqmm Copper Cable to connect earth electrod to MEEB-15 Mtr Approx. (Inspection by RDSO) | — | — | — | 7,47,262.42 | |
| — | 60.00 | — | — | ||
| Supply of 35 Sq. mm. multistrand single core PVC insulated copper for connecting earth bus bar to earth electrode. (Inspection by RDSO) | — | — | — | 21,793.1 | |
| — | 3.00 | — | — | ||
| Supply of Microprocessor based universal earth resistance sensing unit 12 channel AC/DC. as per RDSO/SPN/256/2002 with latest amendments. (Inspection by RDSO) | — | — | — | 3,90,526.72 | |
| — | 114.00 | — | — | ||
| Supply of Track Lead Juction Boxes as per C.Rly Drg. No.RST 11509 made from fiiber glass alongwith terminal blocks. (Inspection by Consignee) | — | — | — | 1,06,793.98 | |
| — | 38.00 | — | — | ||
| Supply of B type choke to specn.No.IRS.S.65/83 (Amdt -3) with latest amendments. (Inspection by RDSO) | — | — | — | 1,24,539.31 | |
| — | 38.00 | — | — | ||
| Supply of adjustable Track Feed Resistance disc type 7.5/15/30 ohms as per RDSO Drg. No. SA 20161-66/M (Adv) with latest amendments (with Phenolic moulded base). (Inspection by Consignee) | — | — | — | 43,755.8 | |
| — | 38.00 | — | — | ||
| Supply of Track feed battery chargers, 110V AC input 2, 4 to 6 V DC Output to Specn.No.IRS.89/2013/Ver 1.0 with latest amendments. Charger shall be suitable for charging 80 AH battery. (Inspection by RDSO) | — | — | — | 82,552.92 | |
| — | 2500.00 | — | — | ||
| Supply of Channel Pins single groove, galvanised, 7 mm suitable for 4mm dia bonding wire as per spec No IRS S 17-75 Revision 3 . (Inspection by Consignee) | — | — | — | 4,491.85 | |
| — | 225.00 | — | — | ||
| Supply of 8 SWG GI wire (4mm dia) suitable for track circuit rail bonding .As per IRS specification S:13-62 (Inspection by Consignee) | — | — | — | 17,461.89 | |
| — | 30.00 | — | — | ||
| Supply of Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes.Consignee inspection under manufacturer certificate. (Inspection by Consignee) | — | — | — | 7,606.37 | |
| — | 102.00 | — | — | ||
| Supply of William stretcher nylon insulation set suitable for ground connection as per RDSO drg No T-10367, T-10368, T-10384 as applicable and to the spec IRS S 23 & 40/84 with latest amendements .(Inspection by Consignee) | — | — | — | 48,494.74 | |
| — | 68.00 | — | — | ||
| Supply of Tongue attachment nylon insulation set consisting of one insulating plate as per Drg no: RST-106961 & 3 nos of Ferrules with collars to suite rodding supplied as per RDSO spec & Drg.no: RST-10692 (Inspection by Consignee) | — | — | — | 20,563.63 | |
| — | 108.00 | — | — | ||
| Supply Gauge Tie plate nylon insulation as per RDSO drg No: T- 10372Alt2, T-10368, T- 10371Alt2, T-15083/88/Alt2 & T-11690/Alt2 and to the spec IRS S 23 & 40 with latest amendements 01 or latest amandments .(Inspection by Consignee) | — | — | — | 23,566.67 | |
| — | 8.00 | — | — | ||
| Supply of Ground connections, complete set suitable for IRS type/appd. point Machine for ordinary turnout with tounge attachment insulation and other insulation as per RDSO Drg. S /3361 /62 /63(for IRS type point machine) or RDSO Drg No. SA-9151 /52 (for Siemens point machine) with latest amendements . However the ground connection shall be procured only after confirmation from Railway engineer as per site condition /type of machine/turnout.(Inspection by Consignee) | — | — | — | 58,434.74 | |
| — | 150.00 | — | — | ||
| Supply of GI pipe, inner dia. 100mm dia. B-class as per spec. No.IS 1239 PT.1/2004 or latest with sockets and fittings.TATA/ JINDAL/ ZENITH BIRLA Make. (Inspection by Consignee) | — | — | — | 1,38,016.37 | |
| — | 228.00 | — | — | ||
| Supply of DWC HDPE Pipe with one snap fit coupler and 'O' ring fire resistant, anti rodent,in 6mtr length of size 120 mm outer dia as per RDSO /SPN /204/2011/Ver 1.1 with Amdt 1 or latest. (Inspection by Consignee) | — | — | — | 65,510.39 | |
| — | 13000.00 | — | — | ||
| Supply of RCC pipe half round of size 150mm dia outer and 100 mm dia internal 1 mtr long matching to IS No.458/2003 amendment-1 with Rev.4. (Inspection by RITES) | — | — | — | 23,95,491.1 | |
| — | 3720.00 | — | — | ||
| — | 110.00 | — | — | ||
| — | — | — | 21,310.84 | ||
| — | 340.00 | — | — | ||
| — | — | — | 7,108.83 | ||
| — | 340.00 | — | — | ||
| Supply of End clamp for modular terminal block (Inspection by RDSO) | — | — | — | 5,109 | |
| — | 160.00 | — | — | ||
| Supply of marker card as per customer spec(10x10) (Inspection by RDSO) | — | — | — | 11,986.84 | |
| — | 150.00 | — | — | ||
| Fuse links of (400mA,630mA,1 A,1.6 A,2A,4A,6.3A & 10A) (Inspection by Consignee) | — | — | — | 5,784.43 | |
| — | 22.00 | — | — | ||
| Supply of thermo shrink Jointing kit (Reinforced) TSF-2 type generally conforming to R D S O Specification No.RDSO/SPN/TC/57/2015 Rev 1 with modified kit contents as per CSTE Specification No.CR/SPN/TC/57 (A)/2015 dtd 06.01.2015(Table -A) to be suitable for jointing both 10/20/50 pair PIJF and 4/6 Quad cables alongwith sub-kit(Table-B) for armour continuity. (Inspection by RDSO) | — | — | — | 58,839.48 | |
| — | 24.00 | — | — | ||
| "Supply of Permanently Lubricated HDPE Telecom duct of size 50/42 mm and accessories as per latest Specification TEC GR No. GR/TX/CDS-008/03/March 11 with latest amendment" for OFC cable of size 24 fibre armoured in length of 1000 mtrs/roll. Duct to be supplied from TEC approved sources." (Inspection by RITES) | — | — | — | 15,67,251.56 | |
| — | — | — | 1,21,57,328.88 | ||
| — | 3.00 | — | — | ||
| Installation of relay rack assembly including IDF pillars if any complete with wall support, scaffolding, ladders, runway for cables,Relay/Relay group base plates, fixing of Tag block etc.The work shall be done as per approved plan, extant practice on C. Railway & instruction of Rly. Engineer at site. | — | — | — | 4,115.69 | |
| — | 3.00 | — | — | ||
| Installation of Cable Termination Racks Assembly complete including wall supports, scaffolding, Disconnecting links/ARA terminal, 96 way tag block with tagblock cover & other necessary accessories etc. The work shall be done as per approved plan, extant practice on C. Railways & the instruction of Rly engineer at site. | — | — | — | 3,503.99 | |
| — | 208.00 | — | — | ||
| Charging of 2V Lead Acid Batteries with contractors own battery grade sulphuric acid and distilled water with minimum two charge - discharge cycles, installation of charged batteries in groups & their connection & wiring. The work shall be done as per extant practice of C.Rly & instruction of Engineer-in-charge.Detailed measurements of initial charging shall be recorded jointly by contractor & Rly's site-in-charge. PER 100 VAH= NUMBERS | — | — | — | 14,106.6 | |
| — | 12.00 | — | — | ||
| Wiring,Fixing & commissionig of modules of fuse 0.6 to 4 Amp rating alarm system having change over arrangement and potential free contact witing at Datalogger IDF Etc as per instruction of Railway Engineer (Module of 32 nos fuses) NO OF MODULES= NUMBERS | — | — | — | 6,938.85 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022__POLICY_27_04_22.pdf
ATTACHMENT
C.RLYDRAWINGANNEXURES-SORST-20211_compressed.pdf
ATTACHMENT
InspectionofSafety-CriticalSignalingItemsbyRDSORSDte26.09.2025.1.pdf
ATTACHMENT
DEVLALISIPNO-2105-04-REV--_compressed.pdf
ATTACHMENT
KWSIPREVISED.pdf
ATTACHMENT
KBSNSIPREVISED.pdf
ATTACHMENT
NASIKROADSIPNo.2106-03DT-22.07.2025FOREI.pdf
ATTACHMENT
CorrectionSlips1-11.pdf
ATTACHMENT
MSDACANNX.pdf
ATTACHMENT
TenderDocumentsAdditionalStabling_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .