Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹4.9 LAccepted-Finance HIMACHAL PRADESH HP | L-1 | Accepted-Finance due to rates are on lesser side | |
| 2 | L-2₹5.1 L+₹15,756 (3.19%)Rejected-Finance | L-2 | Rejected-Finance due to rates are on higher side | |
| 3 | L-3₹5.1 L+₹19,412 (3.92%)Rejected-Finance C O R WALL NEAR GOVT SR SEC SCHOOL SANJAULI IN WARD NO 17 BENMORE | L-3 | Rejected-Finance due to rates are on higher side |
| Sl No | Description | Qty | Unit | Des Raj Basant L2 | Mukesh Kumar L1 | Govind Singh L3 |
|---|---|---|---|---|---|---|
| 1.00 | Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with. Paint remover of approved brand and manufacture | 16.55 | sqm | 95 ₹1,572 | 88 ₹1,456 Lowest | 90 ₹1,490 |
| 2.00 | Providing wood work in frames of doors, wir.dows,clerestory windows and other frames wrought, framed & fixed in position: | 0.76 | Cum | 96,500 ₹73,340 | 96,000 ₹72,960 Lowest | 97,000 ₹73,720 |
| 3.00 | Providing and fixing wooden plank ceiling with planks overlapping each other and jointed with wood screws (frame work to be paid separately) in 1st class deodar wood. | 19.95 | sqm | 4,400 ₹87,780 | 4,350 ₹86,783 Lowest | 4,500 ₹89,775 |
| 4.00 | Providing and fixing insulation HDMR board lining with butt jointingwith fitting, i.e Nails, Handels, Hingses & Catcher nails Complete in all Respect 18mm thick | 13.54 | sqm | 5,200 ₹70,408 | 5,000 ₹67,700 Lowest | 5,500 ₹74,470 |
| 5.00 | Providing and fixing HDMR Ply Wood lining with butt jointing and nails (frame work and coner fillets to be measured and paid for separately.6mm thick | 1.56 | sqm | 2,870 ₹4,477 Lowest | 2,880 ₹4,493 | 2,900 ₹4,524 |
| 6.00 | Providing and fixing plain framed panelling with necessary screws priming coat on unexposed surfaces etc. complete with. | 15.09 | sqm | 5,690 ₹85,862 | 5,450 ₹82,241 Lowest | 5,500 ₹82,995 |
| 7.00 | Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface all dirt, dust and sand papered smooth and including a coat of wood filler. | 46.36 | sqm | 300 ₹13,908 | 295 ₹13,676 Lowest | 300 ₹13,908 |
| 8.00 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminium snap beading shall be With float glass panes of 4.0 mm thickness weight not less than 10.00 kg/sqm | 14.07 | sqm | 900 ₹12,663 | 850 ₹11,960 Lowest | 900 ₹12,663 |
| 9.00 | Distempering (two coat) with oil bound washable distemper of approved brand and manufacturer, and of required shade on undecorated wall sarfaces to give an even shade over and including priming coat with distemper primerof approved brand and manufacture after free from mortor droppings and other foreign matter and also including preparing the surface and sand | 14.91 | sqm | 170 ₹2,535 | 160 ₹2,386 Lowest | 180 ₹2,684 |
| 10.00 | roviding and fixing hard board 12 mm thick and 150 mm wide pelmet with 25 mm dia. Wooden curtain rod and brackets including fixing with 25x3 mm MS flat 10 cm long and plug etc. complete with in all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. | 10.64 | kg | 750 ₹7,980 | 720 ₹7,661 Lowest | 750 ₹7,980 |
Tender Value
₹5.0 L
EMD Value
₹10,074
Closing Date
30 Sept 2025, 5:00 pmClosed
EE JSV Division Tissa
EE JSV Division Tissa
Panelling Distempering and wooden flooring and electrical work
2025_HPIPH_115321_1
EE-JSD-TSA-EA-I-2025- 2435-2485 dated- 20-09-2025
Open Tender
Civil Works
Item Rate
90 days
EE JSV Division Tissa
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
EE JSV DIVISION TISSA
₹10,074
13 Nov 2025
20 Sept 2025
1 Oct 2025
20 Sept 2025
30 Sept 2025
20 Sept 2025
Amount
Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufacture and making the surface even with. Paint remover of approved brand and manufacture
Providing wood work in frames of doors, wir.dows,clerestory windows and other frames wrought, framed & fixed in position:
Providing and fixing wooden plank ceiling with planks overlapping each other and jointed with wood screws (frame work to be paid separately) in 1st class deodar wood.
Providing and fixing insulation HDMR board lining with butt jointingwith fitting, i.e Nails, Handels, Hingses & Catcher nails Complete in all Respect 18mm thick
Providing and fixing HDMR Ply Wood lining with butt jointing and nails (frame work and coner fillets to be measured and paid for separately.6mm thick
Providing and fixing plain framed panelling with necessary screws priming coat on unexposed surfaces etc. complete with.
Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface all dirt, dust and sand papered smooth and including a coat of wood filler.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. (Cost of aluminium snap beading shall be With float glass panes of 4.0 mm thickness weight not less than 10.00 kg/sqm
Distempering (two coat) with oil bound washable distemper of approved brand and manufacturer, and of required shade on undecorated wall sarfaces to give an even shade over and including priming coat with distemper primerof approved brand and manufacture after free from mortor droppings and other foreign matter and also including preparing the surface and sand
roviding and fixing hard board 12 mm thick and 150 mm wide pelmet with 25 mm dia. Wooden curtain rod and brackets including fixing with 25x3 mm MS flat 10 cm long and plug etc. complete with in all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.
Providing & fixing laminated wooden flooring made in superior water resistant high density hard wood fibre board make action tesa AC 3 with complete all accessories.
Supplying & fixing 101401-10AMP SWITCH GM (TG) MR
Supplying & fixing FIESTA CELLING FAN 56" MR
Supplying & fixing 102438-10AMP SOCKET (TG) MR
Supplying & fixing 71809-18M METAL BOX MR
Supplying & fixing 70201-1&2M METAL BOX MR
Supplying & fixing WEGA 18M SHEET BLACK MR
Supplying & fixing WEGA 12M SHEET BLACK MR
Supplying & fixing WEGA 3M SHEET BLACK MR
Supplying & fixing WEGA 2M SHEET BLACK MR
Supplying & fixing WEGA 4M SHEET BLACK MR
Supplying & fixing WEGA 8M SHEET BLACK (H) MR
Supplying & fixing WEGA 6M SHEET BLACK MR
Supplying & fixing 101451-1M FAN REGULATOR GM(TG) MR
Supplying & fixing 101493-NIGHT LAMP GM(TG) MR
Supplying & fixing 101405-1M BELL PUSH WITH IND (TG) MR
Supplying & fixing 101525-BLANK PLATE GM (DUMMY) (TG) MR
Supplying & fixing 102441-20AMP SOCKET (TG) MR
Supplying & fixing 101421-20AMP SWITCH GM (TG) MR
Supplying & fixing VI 7W KID COB 3INI MR
Supplying & fixing ALUMINIUM PROFILE 102 MR
Supplying & fixing HUSH-AIR 1250MM CEILING FAN AME. WALNET MR
Supplying & fixing LED STRIP 240 LED ROLL MR S
upplying & fixing CV POWER SUPLLY ADOPTER 5 AMP MR
Supplying & fixing WARMEX-200MM EXUAST FAN MR
Supplying & fixing CHANDELIER(JHUMAR) MR
Supplying & fixing PVC CASSING 32*16 MR
Supplying & fixing 02305GR-ALLESSIO 25AMP MCB MR
Supplying & fixing PVC FLEXIBLE PIPE MR
Supplying & fixing TRACK LINE MR
Supplying & fixing GL90991- TRACK LIGHT 30W MR
Supplying & fixing Havells life line 0.75 sq. mm 90 mtr.
Supplying & fixing Havells life line 1.00 sq. mm 90 mtr.
Supplying & fixing Havells life line 1.5 sq. mm 90 mtr.
Supplying & fixing Havells life line 2.5 sq. mm 90 mtr.
Supplying & fixing Havells life line 4.00 sq. mm 90 mtr.
Wiring for light point/fanpoint/exhaust fan/ call well point with 1.5sq.mm PVC insulated heat resistant flame retardant (hrfr) and low smoke single core (flexible) copper conductor cable in surface/insulated steel conduit and eatthing the light point with 1.5 sq. mm HRFRLS/PVC insulated single corecopper conductor cable as required (havells make)
Wiring for power plug with 2x4 sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible copper conductor cable in surface/ recessed steel conduit along with 2 no 4 sq.mm HRFRLS/PVC insulated single core copper conductor cable for earthing as required. (havells make)
Supplying and fixing of folllowing size of PVC conduit along with accessries in surface/recess including cutting the wall and making good the same in case of recessed conduit as required
25 mm dia casing pipe MR
Des Raj Basant (BID ID -559098)
Govind Singh (BID ID -559124)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .