REPAIRS TO JOINERY, ROOF, PLINTH PROTECTION, FLOORING, WALL TILING, SANITARY FITTINGS, PLASTERING AND SUNKEN FLOOR OF CERTAIN OTM ACCN AT UMROI MIL STN UNDER GE UMROI

Amount

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

Material & Labour for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and finished concrete surface even and smooth without using extra cement including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

Material & Labour for for 40mm thick PCC 1:2:4 type B1, using 20mm graded stone aggregate as in flooring and finished surface even and fair using extra cement, complete all as specified and as directed.

Material & Labour 3 mm thick glass dividing strip and width of 38 mm for PCC flooring complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified

Material & Labour for 15 mm thick screed bed or bedding layer of cement mortar (1:6), for laying floor finishes, complete all as specified and directed.

Material & Labour for 10mm thick screed bed or bedding layer of cement mortar 1:4, for as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed.

Material & Labour for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.06 sqm but n exc 0.11 sqm (300mm x 300mm), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

Material & Labour for glazed ceramic coloured/printed tiles 350x 250x 7 mm / 450X 350X 7mm thick, set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries/rubbish etc., complete all as specified and as directed.

Material & Labour for 15mm thick rendering in CM (1:4) in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick finishing the surfaces with fair and even without using extra cement complete all as specified and directed.

Supply only integral WPC

Material and labour rendering 15mm thick in cement mortar (1:6) on brick or concrete surface finished even and smooth without using extra cement, complete all as specified and directed

Material and labour for 5 mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces such as soffits of slabs, in patches n exc 1 sqm each finishing the surfaces fair and even

Material and labour for Preparing newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and as directed.

Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete, complete all as specified and as directed.

Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of new surafaces, complete all as specified and directed.

Material & Labour for cement concrete type C1 1:3:6 (20mm graded aggregate), in surface channels and drains, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc, complete all as specified and as directed.

Material and labour for complete removal of loose/ cracked concrete including reinforcement if required from RCC roof projection, chajja, fins, facia etc and making good with PCC (1:1.5:3) type A0 using 12.5 mm graded aggregate) mixed with water proofing compound in any slab and in any position finsihed the surface even and smooth with out using extra cement including necesary formwork and weldign/binding of reinforcement ( including reinforcement) if required complete as directed by engineer in charge complet( Note wpc will be measured and paid seperately under respective items)

Dismantling wall and ceiling board any thickness including cover fillets, complete all as specified and as directed.

Material & Labour for false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete at all heights as per direction of Engr-in-charge.

Dismantling rails, posts, rafters, purlins, etc in framed work, under 40sqcm in section, complete all as specified and as directed.

Material & Labour 4 mm thick non asbestos plain bldg board fixed to timber frame work in repairs with screws as in ceiling complete all as specified and as directed

Supply and fix Anodised aluminium snap grid frame work (605 x 605 mm) for false ceiling, including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fastners 12.5 mm dia 40mm long, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins and providing fixing new one n,exc 0.5sqm each pane complete all as specified and as directed.

Supply & Fixing sheet glass ordinary quality 4mm thick glazing in square/ rectangle n,exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel etc, complete all as specified and as directed.

Material & Labour for 4mm thick figured glass n.exc 0.50 sqm each pan, pin headed type and glazing with oil putty or aluminium beads fixed to steel etc complete all as specified and as directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n.exc.4 Sqm each, complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) n.exc.1.5 Sqm each, complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sq. M each and removing from site, complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq. M each and removing from site, complete all as specified and directed.

Supply & Fixing pressed steel door frame 125x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick , etc complete, as specified and directed.

Supply & Fixing pressed steel door frame 105x60 mm with one or more rebated incl necessary fixing lugs hings, lock strick etc, complete as specified and directed.

Material & Labour for PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) as in filling of pressed steel frame, complete all as specified and as directed.

Supply & fix Factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm prelam PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply & fix Factory made Solid PVC Double door frame of size 50mm x 95mm single side prelam PVC sheet used instead of Plain colour PVC sheet, reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

Supply & fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples, complete all as specified and directed.

Supply and fix in repair brass mortice lock, 4 levers, vertical type, size 100mm, complete all as specified and directed.

Supply and fix bands, straps, supports or stays for rainwater , clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts and similar small articles conforming to Fe-290, Gde-E-165, complete all as specified and directed.

Supply & Fixing for 2nd class H/W panelled shutter 35mm thick (any number of panels) with panels of timber flat on both sides factory made (feathers edged) or venerred particle board medium density, wood particle board with commercial face veneers complete all as specified & directed

Supply & Fixing 2nd class hard wood 30mm thick glazed and skelton factory made shutter(wihout sash bars) open rebated to received gauze etc fitted with cut and mitred beads for securing gauze and fixed to frame complete all as specified & directed

Supply & Fixing 2nd class H/W plain solid straight chowkhats or frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc all as specified and directed.

Supply & fix galvanished mild steel wire cloth 0.56mm nominal dia and 1.18 mm average width of apperatures, complete all as specified & directed

Supply & fix 100 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified & directed

Supply & fix 75 mm long medium weight, cold rolled mild steel Butt hinges, complete all as specified & directed

Supply & fix Aluminium plate type II Gate and shutter, hook & eye 150 mm size, complete all as specified & directed

Supply & fix 150 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified & directed

Supply & fix 100 mm long Aluminium, anodised, barrel tower bolts of extruded section, complete all as specified & directed

Supply & fix 150mm aluminum anodised bow handles, complete all as specified & directed

Supply & fix 100mm aluminum anodised bow handles, complete all as specified & directed

Supply and fix 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified & directed

Supply & fixing in repairs vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing only flushing cistern with brackets including waste pipe etc.

Supply & fixing in repairs Vitreous china wash hand basin size 550x400mm (flat back or angle back type) including 32mm dia brass chromium plated waste fitting a pair if cast iron bracket duly painted /erecting stand including cutting and pinning in ends making good disturbed surfaces in CM 1:3 including taking down unserviceable wash hand basin and connected items of any description, complete all as specified and as directed.

Supply & fixing of CI floor trap with gratings including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) for 100 mm bore, complete all as specified and as directed.

Supply and fix in repairs Cast iron 100 mm dia P or S trap, complete all as specified and as directed.

Supply & fix in repairs PVC connection 15 MM size with PTMT nuts of length 450MM, complete all as specified and as directed.

Supply & fix in repairs PVC connection 15 MM size with PTMT nuts of length 600MM, complete all as specified and as directed.

Supply & fix swivel shower of PTMT any colour for fixing with 15mm pipe(Minimum weight 40 gms), complete all as specified and as directed.

Supply & fix in repair 15mm Bore bib tap cast copper alloy chromium plated fancy type with crunch or butterfly handle screw down scrwed for iron piupe or for brass funnel and fixed, complete all as specified and as directed.

Supply & fix in repair 15mm bore dia pillar taps, fancy type chromium plated with capstan heads chromium plated screwed down high pressure, with or without lettered 'hotor cold' with long screwed shank and fly nuts screw for iron pipe, complete all as specified and as directed.

Supply & fix 15mm Bore PTMT stop cock any colour screwed for iron pipe and fixed (minimum weight 15mm-90gms) in repair complete all as specified and as directed.

Supply & fix 15mm Bore PTMT angle stop valve any colour screwed for iron pipe and fixed (minimum weight 15mm-90gms) in repair complete all as specified and as directed.

Supply & Fix in repairs brass chromium plated tubular towel rail, 20mm dia, 60cm long between flanges, complete all as specified and as directed.

Supply & Fix in repairs vitreous china 580x440 mm,"ORISSA PATTERN" with 'P' or 'S' trap size squatting pan (Exclusive flushing cistern and flush pipe) incl foot rest complete and provision of lime concrete bedding.

Supply and fix in repairs Vitrous china wash down water closet pan ( pedestal pattern ) , white including white plastic water closet seat & back with flat bottom and cover mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed.

Taking up or down steel tubing and conncection 20 mm, incl cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and conncection 15mm, incl cleaning for re-fixing or removal to store, complete all as specified and as directed.

Supply & Fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes of 20 mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. with all fittings and fixed complete to wall and ceiling or laid in floors and making connection with old GI tube/PPR pipe using suitable section complete leakproof all as specified and as directed.

Supply & Fixing 3-layer PP-R Polypropylene random copolymer) concealed pipes of 16 mm outer dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. with all fittings and fixed complete to wall and ceiling or laid in floors and making connection with old GI tube/PPR pipe using suitable section complete leakproof all as specified and as directed.

Cutting existing steel tubing 15mm bore for alterations or additions (Each cut measured) complete all as specified and directed.

Cutting existing steel tubing 20mm bore for alterations or additions (Each cut measured) complete all as specified and directed.

Screwing existing steel tubing 15mm bore for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.

Screwing existing steel tubing 20mm bore for alterations or additions (or lengthening screw on pipe to form connector) complete all as specified and directed.

Material & Labour for for cutting chases,pinning in, making good to facing where required and pointing in cement mortar 1:3 to edges or ends of landings,steps, cills, sunshades, lintels,etc and and cutting chases for concealed water tubing or making good on brick walls cutting not exc. 10 cm in girth complete all as specified and directed.

Supply & Fix 32 mm low density polyethylene pipes (LDPE) of pressure rating 6 kgf/sqcm fixed tio walls ceilling or in floor etc.complete all as specified and directed.

Supply and fix in repairs grating doom 100mm dia PTMT (Min weight 25 grms)

Demolition of cement concrete above ground floor and pavings exc 15 cm thickness (below or above ground level ) unreinforced complete all as directed.

Material & Labour for 15 mm thick rendering in CM 1:3 on concrete/block surfaced finished even and smooth without using extra cement mixed with WPC @ 3% by weight of cement complete all as specified and directed.( WPC shall be measured and paid separtely)

Material & Labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surface as in sunken complete all as specified and directed.

Material & Labour for polythene film black, 50 micron laid in floors complete all as specified and directed.

Material & Labour for lean concrete (1;7:12) Type F2 laid compacted all as directed and specified

Removing demolished material upto a distance exceeding 250m but not exceeding 500m including loading/unloading and spreading at the destinaiton if required/directed by Engr-in-Charge.

Supply and fix in repairs Harrison rails, anodised aluminium alloy, with fixing brackets, stops, rollers etc.complete all as specified and as directed.

Supply and fix in repairs, stainless steel curtain rod minimum dia 25 mm with suitable fixing brackets, stops, rollers etc.complete all as specified and as directed.

Material & Labour for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips all as specified and directed by Eng-in-charge.

Schedule of Credit

M/S N K associates

M/S UTTAM SAHA

Lyngdohs Construction Company And Associates

M/S UB ENTERPRISE

M/s Jaiswal and Co

M/s M.L Consortium

M/S Nakul Chandra Samal