Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.2 LAccepted-Finance | ₹11.2 L | L1 | Accepted-Finance Being Lowest (L1) |
| 2 | L2₹11.8 LRejected-Finance SADASHIV PHUGE NAGAR OPP SANDVIK FACTORY RADHIKA RESIDENCY F WING FLAT NO 7 PHUGEWADI PUNE 411 012 | PUNE | MAHARASHTRA | 411012 | ₹11.8 L | L2 | Rejected-Finance Not Being Lowest |
| 3 | L3₹13.5 LRejected-Finance | ₹13.5 L | L3 | Rejected-Finance Not Being Lowest |
| 4 | L4₹13.8 LRejected-Finance FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | ₹13.8 L | L4 | Rejected-Finance Not Being Lowest |
| 5 | L5₹15.0 LRejected-Finance 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | ₹15.0 L | L5 | Rejected-Finance Not Being Lowest |
| Sl No | Description | Qty | Unit | M/S Eagle Electricals And Rewinding Works L1 | metro electrical services L5 | SKS Electricals L4 | M/S kirpan Enterprises L2 | Mukund Engineers and Contractors L7 | BSK Construction L8 | Crown Chemicals L6 | Mayur Haridas Kumbhar L3 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material and labour for dismantling the Blower set (Twin Lobe Blower- 5m3/hr) complete of up to 7.5 HP and carrying out repair/replacement for defective parts such as bearing, shaft sleeves, gland plate, impeller, including replacement of worn out nuts, bolts, filling of pump oil heavy grade (Super-90) , greasing of bearing, replacement of gasket, mechanical seal, rotor job, replacement of belts, etc etc complete all as directed and reassembling, testing & commissioning complete.
Note:
1. Rates for making arrangement for lifting up blower motor shall be deemed in quoted rates.
2. Once the motor set repaired, the contractor shall by default get the bearing, and other necessary parts changed and shall remain responsible for proper functioning of motor pump for complete.
3. Item Rate Include Alignment of Shaft , Servicing of Motor ,servicing Of Blower ,Servicing of Gear Box, Grease Required at job Work include in unit Rate | 2 | Each Job | 6,000 ₹12,000 | 9,000 ₹18,000 | 6,500 ₹13,000 | 8,000 ₹16,000 | 16,000 ₹32,000 | 18,000 ₹36,000 | 10,000 ₹20,000 | 10,000 ₹20,000 |
| 2.00M&L dewatering, cleaning of sewage water collection U/G tanks with high pressure jet to remove all mosses, algae and dirt and removal of dirty water along with sludge machines/industrial vacuum cleaners and disposal of the same to a safe distance including scrubbing of internal surface by steel wire brush, removing the dirt completely using industrial vacuum cleaners and sterilizing the complete internal surface of the tank by using ISI mark Gd I bleaching powder and marking the date of cleaning width complete all as directed for the following sizes:- Note: If the work is not done upto satisfaction level of EIC, the work will be redone upto required level without any extra cost. Necessary tools and safety gears to be arranged by contractor without any extra cost. Labours safety shall be contractors responsibility. Also, sludge should be picked and disposed off beyond 500 mtr of STP premises | |||||||||||
| 3.00 | (a) 4 x 2 x 10 m | 1 | Each Job | 6,000 ₹6,000 | 9,000 ₹9,000 | 7,500 ₹7,500 | 6,000 ₹6,000 | 13,300 ₹13,300 | 15,000 ₹15,000 | 10,000 ₹10,000 | 10,000 ₹10,000 |
| 4.00 | (b) 6 x 6 x 6 m | 1 | Each Job | 9,000 ₹9,000 | 14,000 ₹14,000 | 10,300 ₹10,300 | 10,000 ₹10,000 | 20,500 ₹20,500 | 20,000 ₹20,000 | 16,000 ₹16,000 | 12,000 ₹12,000 |
| 5.00 | ( c) 3 x 3 x 6 m | 1 | Each Job | 5,500 ₹5,500 | 8,500 ₹8,500 | 7,500 ₹7,500 | 6,500 ₹6,500 | 16,000 ₹16,000 | 15,000 ₹15,000 | 10,000 ₹10,000 | 8,000 ₹8,000 |
| 6.00 | M&L for cleaning of STP/pump house and surrounding area by surface excavation upto 10 cm depth incl removing shrubs, grass, miniplants and other unwanted materials and levelling complete in soft/loose soil all as specified and directed. | 500 | Sqm | 15 ₹7,500 | 10 ₹5,000 | 9 ₹4,500 | 10 ₹5,000 | 16 ₹8,000 | 40 ₹20,000 | 25 ₹12,500 | 20 ₹10,000 |
| 7.00 | Supply and float suspended plastic carriers (as available on site) with large protected surface areas for the growth of bacteria and proper decomposition of sludge in all three tanks complete all as specified and directed by Eng-In-Charge. | 100 | Kg | 10 ₹1,000 | 10 ₹1,000 | 256 ₹25,600 | 10 ₹1,000 | 25 ₹2,500 | 25 ₹2,500 | 20 ₹2,000 | 50 ₹5,000 |
| 8.00 | M&L for removal of dirty water alongwith sludge from lifting well by machines/ industrial vaccume cleaner and disposal of the same to a safe distance using industrial vaccume cleaner manually and sterilizing the complete internal surface of the tank by using ISI mark Grade I bleaching powder complete all as directed. Note : Cleaning will be done every 03 months. Contractor shall have arrangements for agitating the sludge andthinning the sludge. Necessary tools and safety gears shall be arranged by the contractor without any extra cost. Labour safety shall be Contractor's responsibility. Also sludge shall be picked and disposed off beyond the boundry of CTW premises | 6 | Each Job | 5,200 ₹31,200 | 9,000 ₹54,000 | 8,000 ₹48,000 | 4,000 ₹24,000 | 9,700 ₹58,200 | 12,000 ₹72,000 | 9,000 ₹54,000 | 12,000 ₹72,000 |
| 9.00 | M&L for earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. Strip of size 32x6 mm by means of bolts,nuts and check nuts and washers of galvanised steel to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including chamber made up of PCC 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover, 20mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement incl excavation and earth work in any type of soil and testing complete all as specified and directed. | 4 | Each Job | 5,000 ₹20,000 | 4,000 ₹16,000 | 4,900 ₹19,600 | 4,000 ₹16,000 | 7,000 ₹28,000 | 8,000 ₹32,000 | 9,000 ₹36,000 | 4,200 ₹16,800 |
| 10.00 | Dismantling and taking out unserviceable Dry Motor submersible sewage pump set having flow : 800m3/hr, 15 mtr head self cooling jacket system and solid handling capacity 100mm installed at STP Kasarwadi of capacity 70HP, Make Kishor Pumps, Model ASTRA SA 250-315 with the following work services:- a) Disconnecting water and electric connections, shifting the pump from Pump house to workshop ( to and flow) for carry out necessary repair.
b) Opening the pump completely part by part without damaging any parts, descaling and cleaning of all parts for inspection and finding serviceability / unserviceability of the parts.
c) Repair and assembling of pumps by using existing serviceable parts and replacement of unserviceable parts as directed including necessary machining works required for proper setting and smooth functioning to achieve desired discharge of the pump. d) Re install the pump at its existing foundation, making electric and water connections, finally testing the pump set for its trouble free functioning complete. Note : (i) Spare parts required for replacement shall be measured and paid separately under appropriate items as supply only. (ii) Any Machining works required for balancing of impeller /for fixing of new parts with existing shafts is deem to be included with the unit rate. No extra amount on this account shall be entertained separately. iii) Any minor parts which are not covered under this schedule but inescapable requirement for repair shall also be deem to included with the unit rate quoted. No extra on this account shall be entertained by the Department.
(iv) No extra cost will be paid to the contractor if taking out and lowering of motor and pump is done on same motor and pump which is being repaired once. It will be contractor responsibility to ensure all parameters before lowering the pump and motor. | 3 | Job | 8,000 ₹24,000 | 12,000 ₹36,000 | 9,000 ₹27,000 | 10,000 ₹30,000 | 25,000 ₹75,000 | 18,000 ₹54,000 | 12,000 ₹36,000 | 8,000 ₹24,000 |
Updated dates
Tender Value
₹18 L
EMD Value
₹36,000
Closing Date
9 Jan 2026, 6:00 pmClosed
Shri Vikas Tanwar, IDSE, GE (CME) Khadki
Garrison Engineer (CME) Khadki, Phugewadi, Dapodi, Pune
REPAIR/REPLACEMENT AND COMPREHENSIVE MAINT OF SEWAGE TREATMENT PLANTS AND LINES ALONGWITH CONNECTED WORKS AT KASARWADI AND CTW AT CME UNDER GE(CME) KHADKI
2025_MES_744270_1
8666/E8
Open Tender
Civil Works - Water Works
180 days
Garrison Engineer (CME) Khadki, Phugewadi, Dapodi
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer (CME) Khadki
₹36,000
Yes
22 Jan 2026
12 Dec 2025
12 Jan 2026
12 Dec 2025
9 Jan 2026
27 Dec 2025
13 Dec 2025 - 26 Dec 2025
M&L for cleaning of STP/pump house and surrounding area by surface excavation upto 10 cm depth incl removing shrubs, grass, miniplants and other unwanted materials and levelling complete in soft/loose soil all as specified and directed.
Supply and float suspended plastic carriers (as available on site) with large protected surface areas for the growth of bacteria and proper decomposition of sludge in all three tanks complete all as specified and directed by Eng-In-Charge.
M&L for removal of dirty water alongwith sludge from lifting well by machines/ industrial vaccume cleaner and disposal of the same to a safe distance using industrial vaccume cleaner manually and sterilizing the complete internal surface of the tank by using ISI mark Grade I bleaching powder complete all as directed. Note : Cleaning will be done every 03 months. Contractor shall have arrangements for agitating the sludge andthinning the sludge. Necessary tools and safety gears shall be arranged by the contractor without any extra cost. Labour safety shall be Contractor's responsibility. Also sludge shall be picked and disposed off beyond the boundry of CTW premises
M&L for earthing with 600x600x6mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. Strip of size 32x6 mm by means of bolts,nuts and check nuts and washers of galvanised steel to the extent of 7.5 metres as earthing lead and connecting to the eqpt/machinery etc. incl charcoal dust and common salt packed all around the earth plate in alternate layer in the earth pit all as per electrical plate No. 3 of SSR Part I-2009 including chamber made up of PCC 1:2:4 type B1 with M.S. angle iron frame, C.I. Cover, 20mm dia light grade G.I. Pipe from top edge of the earth plate upto M.S. funnel with wire mesh provided inside the concrete earth pit for watering arrangement incl excavation and earth work in any type of soil and testing complete all as specified and directed.
Impeller for Model ASTRA SA 250-315
Double mechanical seal( Internal & External) for Model ASTRA SA 250-315
Mechanical seal cover for Model ASTRA SA 250-315
upper bearing for Model ASTRA SA 250-315
lower bearing for Model ASTRA SA 250-315
cable gland for Model ASTRA SA 250-315
Cable seal for Model ASTRA SA 250-315
Stuffing box bush for Model ASTRA SA 250-315
Hose clip for Model ASTRA SA 250-315
Oil seal for Model ASTRA SA 250-315
lower Bearing housing for Model ASTRA SA 250-315
Impeller screw for Model ASTRA SA 250-315
M&L for disconnecting and removing the PUMP SET from its foundations/ base frame located at different locations, by disconnecting suction, delivery pipes, pump couplers and electrical connections, taking it to workshop for repair, Dismantling and opening up of PUMP assembly complete, removing worn out Gland, bush, shafts, pump Housing, bearing, Gland Packing, Pin locking set, nuts and bolts, washers etc., and replacing with new parts of same make/model/type including necessary machining works as required, assembling, Balancing and refixing the pump back to its position after getting repair and making all connections, carry out alignment, and testing for satisfactory function all as specified and as directed for non clog submercible sewage 5 HP three phase electric motar
(a) Impeller
(b) Mechanical seal
(c ) Suction plate
(d) Bearing sleeve
(f) Bearing bush suitable
(g) Neck ring suitable
(h) Casing wear ring
(i) Strainer
(j) Shaft seal
(k) Stuffing box bush
M & L for carry out water quality analysis for bacterial, chemical and biological analysis including for collection of water samples from the pump house and one of the location as specified by Engineer In Charge and testing from govt approved testing laboratory/FHHL lab, submitting of report for minimum following parameters (a) Turbidity (NTU) (b) pH (c) Total Hardness as CsCO2 (mg/l) (d) Sulphate as SO2 (mg/l) (e) Iron as Fe (mg/l) (f) Magnesium as Mg (mg/l) (g) E-Coli or thermo tolerant coliform bacteria (h) Remarks of Govt water testing lab
M & L for Framed work such as grills, gratings,bar,flat plates etc. conforming to Fe.290.Gde-E-165 with two coat of synthetic enamelled paint over coat of red oxide primer including preparation of new steel surface incl taking down old unserviceable one all as directed and specified by Engineer In Charge
Supply and fix mechanical joint for ductile iron pipe of 400 mm with complete nut, bolt and taking out of old joint including excavation, removing, and filling all as specified by EIC
Supply and fix rubber gasket joint for ductile iron pipe of 400 mm with complete nut, bolt and taking out of old joint including excavation, removing, and filling all as specified by EIC
Supply, laying, jointing & testing 400 mm dia DI-K9 class pipes with spigot and socket, suitable for Push on rubber joint, with internal cement mortar lining, and external zinc and black bitumen coated pipes in any lengths including Rubber Gasket & joints laid in trenches/ Road/ Ducts/ Footpath/ on wall/ on floor locations, including taking down/out existing pipes of any type, size, complete all as specified.
(a) 250 mm bore
(a) 250 mm bore
Supply and fix in replacement of cast iron air release valve of 100 mm dia brass spindle supplied and installed complete
S&F in replacement of LED building security light fitting 25 Watt , energy saving and environmental friendly long life LED fitting made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection including suitable size bracket incl taking down old UNSV one.
S&F in replacement of LED flood light fitting 150 Watt , energy saving and environmental friendly long life LED fitting with polycarbonate optics pressure die castIP 66 ingress protection incl taking down old UNSV one.
Material and labour for suppling and fixing GI Pipe 100 mm dia medium grade with all fitting laid in trenches including laying , excavation jointing etc, complete,
(a) Soft/loose soil
(b) Hard/dense soil
Returning, filling in, including spreading, levelling watering and well ramming in layers of soil not exceeding 25cm.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point of soil.
Supply and fixing of Indoor type automatic power factor correction (APFC) panel of capacity 110 KVAr panel board cubical, Stand mounted CPRI approved IP-54 with MS angle iron base frame made out of 40x40x6mm angle, having 4 Nos legs of 2 feet height of size, totally enclosed dust and vermin proof, front opening with locking arrangement, suitable for AC 415V, 3 phase, 50 Hz system, Red, Yellow, Blue and Black coloured insulated Aluminium bus bar of suitable size to carry 200 amps four Nos of suitable length and internal wiring with aluminium strip of suitable size duly painted internally and externally with two coats of synthetic enamel paint over a coat of red oxide primer of any tint including necessary excavation, earth work and PCC. marking wiring circuits, and minimum comprising of the following accessories :-
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
BOQ_833393.xls
BOQ • 0.38 MB
8666tender.pdf
Tender Documents • 1.29 MB
Download all tender documents and submit your bid
