PROVN OF TOILET BLOCK WITH ALLIED SERVICE BETWEEN SVG AND LOGISTIC COMPLEX BLDGS OF 505 ABW AND PROVN OF COVER DRAIN IN AROUND OR MESS AND LINE AREA OFFRS MESS JCOS CLUB COMPLEX AND QTR GD COMPLEX AT 21 SIGNAL GP UNDER GE NORTH DELHI CANTT 10

Amount

Sch "A" Part-I All excavation earth work under the work shall be measured be and paid under this Sch

Surface dressing in soft / loose soil n.exc 15 cm deep including cleaning away grass vegetation saplings shrubs, bush wood, undfgrowth roots and trees not exc 30 cm girth including disposal of spoils, in any type of soil all as directed by Engr-in-Charge

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil

Excavation in trenches not exc. 1.50 m wide and n.exc 1.5 m in depth for foundation, cesspits, manholes, sewage line etc and getting out in hard / dense soil as directed.

All as per item above but additional 1.5 m or part thereof in depth beyond the first 1.5m.

Returning and filling in trenches spreading leveling watering and well ramming in layers not exc 25 cms thick soft / loose soil complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point as in soil complete as specified.

Sch "A" Part- II PROVN OF TOILET BLOCK WITH ALLIED SERVICE BETWEEN SVG AND LOGISTIC COMPLEX BLDGS OF 505 ABW

M&L PCC 1:4:8 type D2 using 40 mm graded stone agg as in foundation / mass filling all as specified and directed.

Fomwork to sides of concrete Rough finish flat foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works complete all as directed.

Formwork to columns in square / rectangular section, rough finished flat surfaces.

Formwork to sides and soffits of roof beam, lintels, cantilevers, shelves indluding supports, overhangs, etc, rough finished flat surfaces.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to edges of floor / roof slabs and similar work exceeding 10 cm but n exc 20 cm wide, rough finished surfaces.

M&L for RCC M-25 (Design Mix) foundation, including rafts footings, foundations beams, plinth beams complete all as specified and directed.

M&L for RCC M-25 (Design Mix) as in column complete all as specified and directed.

M&L for RCC M-25 (Design Mix) beamscantilevers, chajjas, lintelsetc etc complete all as specified and directed.

M&L for RCC M-25 (Design Mix) slabs supported on wall, beams and columns in floors, roofs and in shelves and the like complete all as specified and directed.

TMT Steel bars of dia 10 mm and over cut to length bent to shape required and binding with MS wire annealed of dia n less than 0.9 mm dia.

M&L TMT steel bars 5 mm dia and over up to and incl 10mm dia in stirrups, spacers and binders as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing clips etc.

M&L for water proofing treatement to RCC roof slabs, walls, chhajjas etc, shall be carried out as specified below and as directed by Engineer-in-Charge. (a) M&L for 10 mm thick plaster screed bed layer in CM 1:3 on concrete sufraces. (b) Preparing plastered surfaces of roof slabs, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of approved bituminous primer @ 0.20 kg/sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyester, weighing not less than 3.5 kg/sqm with laps & overlaps as specified & joints sealed and applied complete by torch application method all as specified & directed by Engineer-in-Charge. Carrying out test by flooding water for 24 hrs for leakage & seepages and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specifed & as directed by Engineer-in-Charge.

M&L brick work with sub-class 'B' class bricks straight or curved on plan exc 6m mean radious in CM (1:6)

M&L for brick work with sub-class "B" Bricks straight or curved in half brick thick wall built in CM (1:4)

M&L for 10 mm thick Rendering in CM (1:4) on ceiling surfaces, finished even and smooth with out using extra cement.

15 mm thick plastering in CM 1:4 on brick masonary surfaces finished even and smooth with out using extra cement and WPC @ 3% by wt of cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on unfair faces of bricks work or concrete surfaces finished even and smooth without using extra cement.

Supply only integral water proofing compound.

M&L for PCC 1:2:4 Type B0 using 12.5 mm graded agg as in DPC, 25 mm thick in horizontal or vertical surfaces incl necessary form work.

M&L PCC 1:3:6 type C2 75 mm thick fair and smooth finished surfaces as in plinth protection / foot path.

M&L for Earth filling under floors in layers n exc 25 cm thick and well ramming incl watering as required.

Hard core of gauge n exc 63 mm of broken stone deposited, spread and levelled in layers n.exc 15 cm thick watered and remmed to a true surface,

M&L PCC 1:2:4, type B1 25 mm thick as a levelling course of tiles using 20 mm graded stone aggregate.

M&L joint free coloured non-skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.11sqm but n exc 0.18 Sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

M&L Coloured glazed ceramic tiles of size 400x300x7mm/450x350x7mm on vertical surfaces such as dado set and joined in neat cement slurry and pointed in coloured cement etc over 10 mm thick rendering in cement mortar (1:4).

M&L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate( as in bed blocks for fixing hold fasts of doors and windows frame complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint on external surfaces of wall complete all as specified and directed.

M&L for preparation of new surfaces and applying three coats of white wash on walls.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified.

S&F solid PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered.

S&F but hinges 100 mm size Medium weight cold rolled mild steel fixed complete all as specified.

S&F aluminium alloy, anodised, sliding door bolts 300 mm long with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long.

S&F aluminium alloy handles anodised, fabricated type of size 150 mm.

S&F steel ventilators with top hung shutters including hinges, steel peg stay complete all as specified and directed by Engineer-in-Charge.

S&F 3 mm thick figured glass pin head type and glazing with oil putty n exc 0.5 Sqm in each pane.

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic paint over a coat of red oxide zinc chrome primer.

Supply and fixed rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 1000 Litres capacity hoisted and fixed in position and connecting up pipes securing access covers all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm each) for 20 mm bore.

S&F metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed bore of pipe 15 mm complete all as specified & directed.

S&F metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed bore of pipe 20 mm complete all as specified & directed.

M&L 15 mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor.

M&L 20 mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor.

S&F bib taps brass choromium plated fancy type with crutch or butterfully handle screwed down, screwedfor 15 mm dia iron pipe and fixed.

S&F vitreous china Squatting pan "Orissa pattern" size 580x440m white, with integral foot rest including necessary fitting , salt glazed stoneware P traps size 150x100mm and complete provision of lime concrete bedding etc as required all as specified.

Supply only PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete.

M&L cast iron Nahani trap 75 mm out let dia meter with grating including jointing to waste pipe fixed in repair in cement concrete type B-1 (1:2:4).

S&F Vitreous China wash hand basin white, flat back size 550x400mm incl CI or Angle iron 50x50x6mm brackets complete all as specified.

S&F Tubular towel rail 600mm long of 20 mm chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F 32 mm bore pipe Low density polythylene (LDPE) pressure rating 6kg/Sq cm. for urinal and washbasin etc complete all as spd.

S&F CI Soil /Waste/Vent pipe 100 mm dia spun pipes in any length with or with out ears fixed to walls complete all as directed.

S&F CI Soil /Waste/Vent pipe 100 mm dia spun pipes in any length with or with out ears laid in floors with cement joints.

S&F CI Soil /Waste/Vent pipe 75 mm dia spun pipes in any length with or with out ears fixed to walls.

S&F CI Soil /Waste/Vent pipe 75 mm dia spun pipes in any length with or with out ears laid in floors with cement joints

S&F 100 mm bore CI bend with oval access doors any radius.

S&F 75 mm bore CI bend with oval access door any radius.

S&F 100 mm bore CI branch piece single (equal or un equal) with oval access door.

S&F 100 mm bore CI vent cowl.

M&L for SGSW Gully trap suare or round mounthed type P of size 150 x150 mm with grating complete.

S&F vitreous china Urinal white, half stall type excluding waste coupling and waste pipe.

S&F Urinal Spreader of PTMT White colour fixing to 15 mm bore pipe.

S&F 15 mm dia stop valve cast copper alloy, chromium plated, fancy type with long shank and cup (concealed type), high pressure, screwed for iron pipe or brass ferrule all as specified.

S&F 15 mm dia, pillar taps, cast copper alloy capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S&F for 15 mm dia pipe Angle Valve cast copper alloy capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' long screwed shanks complete all as specified.

M&L Waste fitting brass CP for WHB and urinal basins etc with long screwed shanks and fly nut flange complete and fixed.

S&F PVC Connection for 15mm bore pipe with PTMT nuts length 450mm complete.

M&L PCC 1:4:8 type D2 using 40 mm graded stone agg as in foundation / mass filling all as specified and directed.

M&L brick work with sub-class 'B' class bricks straight or curved on plan exc 6m mean radious in CM (1:4)

15 mm thick plastering in CM 1:4 on brick masonary surfaces finished even and smooth with out using extra cement.

M&L cement concrete (1:4:8) type D2 using 40 mm graded stone agg as in bed to 150 mm dia drain pipes including packing under and hunching against sides of the pipes after they are lead and tested.

M&L 150 mm dia for sail-glazed stoneware drain pipes laid in trenches and jointed as specified.

M&L providing precast cement concrete type 1:2:4 (using 20 mm) in landing, cover slabs (for manholes etc) complete all as specified and directed.

M&L cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate as in coping bending rounded or chamfered on edges complete all as specified and directed.

TMT Steel bars of dia 10 mm and over cut to length bent to shape required and binding with MS wire annealed of dia n less than 0.9 mm dia.

Cutting into existing manholes for connecting new drains internal dia of pipe 150mm making good to pipe and rendering cutting out existing benching and forming branch channel in cement concrete 1:2:4 type B1 smooth finished, and complete all as directed.

Hard core of gauge n exc 63 mm of broken stone deposited, spread and levelled in layers n.exc 15 cm thick watered and remmed to a true surface,

M&L 100mm thick PCC type D-2, 1:4:8 using 40mm graded aggregate complete all as specified.

M&L chequered cement concrete tiles 20cmx20cmx25mm thick set, jointed and pointed in neat cement slurry in floor over 15 mm thick screed bed of CM 1:6

M&L cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate as in coping bending rounded or chamfered on edges complete all as specified and directed.

Sch "A" Part- III PROVN OF COVER DRAIN IN AROUND OR MESS & LINE AREA, OFFRS MESS, JCOS CLUB COMPLEX & QTR GD COMPLEX AT 21 SIGNAL GP UNDER GE (NORTH) DELHI CANTT-10

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0, using 12.5mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:4 omplete all as specified and as directed.

M&L for rendering 15mm thick faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

S & F for precast reinforced cement concrete Manhole covers in 1:2:4 using 20 mmgraded stone agg and set in CM 1:4 all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains, side guide wall including all necessary form work complete all as specified and directed.

M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

Supply & Laying 300mm bore Reinforced concrete pipes, class NP2 pipes with spigot and socket joints, laid and jointed in trenches to a level on concrete bed complete all as specified and as directed.

Mild steel bars(TMT) 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooking for columns hooking ends and binding with and for and including MS wire (annealed) not less than 0.9mm dia.

Sch "A" Part- IV E & M PROVN OF TOILET BLOCK WITH ALLIED SERVICE BETWEEN SVG AND LOGISTIC COMPLEX BLDGS OF 505 ABW

M&L for GI water tubing, medium grade laid in trenches/ on wall etc of sizes 25mm dia including all connected fitting as bend, elbow, union, tee etc. Make: TATA/JINDAL/SURYA

S&F gun metal gate valve with iron wheel head, both ends screwed of sizes 25mm dia. Make : Scud/Tata/Zoloto)

M&L for cutting of existing CI/GI Pipe line for taking branch connecting by necessary cutting/welding work,providing GI fittings such as tee/reducers etc upto 100 mm bore complete including necessary earth work complete all as directed at site.

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and fixing of modular metal flush box and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light point controlled by one, one way switch 06 Amps. Make of wire- Havells/Polycab/Finolex

All as per srl item No 01 here-in-before but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

Supply & fixing switch piano flush type, 06 Amps, single pole, one way, 250 volts complete all as specified & directed. Make : Havells - Reo or equivalent in SSK / Legrand.

Supply & fixing socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 250 volts with socket frame complete all as specified & directed. Make : Havells - Reo or equivalent in SSK / Legrand

Supply and fixing ceiling rose, 6 Amps, 250 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed. Make : SSK / Anchor / Havells

Supply and fixing on wall / ceiling LED batten lighting fixture 20 watts LED 6500K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as specified and directed. Make : Make : Havellst Cat part No: LUMILINEBS20WLED865SPCWH, Wipro Cat part No: LL20-221-XXX-65NE3 or equivalent in Philips.

Supply and surface and wall mounted LED batten 9/10 watt 2 feet long extruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells / Philips/polycab

Supply and fixing of Metalic body wall mounted type exhaust fan 225 mm sweep, 230 volts, AC, 50 Hz capacity including cutting of hole in wall for mounting of fan (as per site requirement) etc complete all as directed by Engineer - in - charge. Make : Havells/ Bajaj / Crompton Greaves.

Supply and fixing energy saving security light fitting of 45 watts LED 6K New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Havells/C.G/Philips

Supply and fixing sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 04 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed. Make :- Legrand / Havells / Standard

Supply and fixing MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand, or Hager, or Schneider,

Supply and fixing MCB, DP, AC, 240 volts of 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand, Cat No. 4085 74 or equivalent in Hager / Schneider.

Supply and fixing or passing through pipe, 6 Sqmm, 2 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed. Havells/Finolex/Polycab

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried vertically in ground (earth pit not less than 2.25meter deep below ground level) with top edge of the plate not less than 1.5meter below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs.Nil

ASHISH GARG AND COMPANY

The new hut furnitures

AAYUSHI ENTERPRISES