SPL REPAIR FOR ROAD FURNITURE AND PROVN OF GENERATOR SHED SEPTIC TANK AT SILA GRN UNDER AGE(I) CIF(U) REASI

Amount

Dual directional reflective cat eye of impact resistant ABS plastic stud 100mm x 100mm solid state duble moulded having ultra violet resistant colour white/red/yellow having micro prismitic/cube corner reflectors on sides provided with steel zinc plated 12mm dia bolts along with ABS plastic stem of length 55mm for fixing to road by hammering and epoxy adhesive including making good any damage caused to existing roads during taking out displaced/damaged cat eyes. Make:GREENLITE Cat Part No. GPL-01-01 or equivalent in Greens/Sinor/Safe Zone/3M.

S&F Solar studs of size 125mm x 125mm or 130mm x 130mm, having 3 LEDs of colour Red/Yellow (total 06 Nos on one side) housed in a tough pressure die cast Aluminum alloy body with built in stem og suitable length to house solar cells, battery and light sensor well protected in side under tough unbreakable polycarbonate transparent sheet roof, having workable capacity for 2-3 days (nights) after fully charged in 8 – 10 Hours Make : GREENS Cat part No. GPL-03-01 or equivalent in Greenlite/Sinor/Safe Zone.

All directional round reflector delinator made out of 16 Gauge mild steel pipe stove enameled and baked to 120 Degree Celsius or powder coated, of outer dia 47 mm and length 750mm. Round head made out of ABS moulded Plastic, provided with high intensity beaded (encapsulated) reflectors of colour (White/Yellow/Red) of band length 240mm with additional 2 reflective strips of 25mm width embedded in position in PCC Blocks, complete all as specified and as directed by Engineer in charge. Make- GREENS Cat Part No. GPLUBPH-11-51 or equivalent in Geenlite/Dark Eye-. (Note: PCC block shall be measured and paid separately under appropriate item)

Dual directional speed breaker having high intensity cube corner reflector ultrasonic welded to high impact resistance plastic ABS body of yellow colour and black of size 250x345x50mm (height) provided with 4 steel nails. Shape of side body to have interlocking pattern to keep all speed breaker in a row, complete all as specified and directed. CAT Part No. GPL 07-55 Make : GREEN LITE

M&L PCC (1:2:4 ) type B1 (using 20mm graded stone aggregate) as in kerb stones, PCC block for delinator etc.

Septic tank, exc. In ordinary soil foundation in PCC 1:2:4, brick work in cement mortar 1:4, RCC slab covers incl RCC pre-cast manhole cover having 6mm plate all around, reinforced cover with angle iron frame, vent shaft and sludge chamber etc. complete for 25 user as per CE/TD-1202 Sh ½ and 2/2.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil.

150mm SGSW pipe laid in trenches and jointed in CM (1:1) all as specified and directed by Engineer-in-Charge.

PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in bed to drain pipe including packing under and haunching against the side of pipes after they are laid and tested for 150mm bore pipe.

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required with internal dia of Pipe 150mm

Returning, filling, ramming including, spreading, leveling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil.

Removing excavated soil to a distance n.exc 50 mtr and deposited where directed at a level n.exc 1.5m above the starting point.

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 Mtr mean radius built in cement mortar 1:4 complete all as spd and directed.

PCC (1:3:6) type C-2 using 40mm graded stone aggregates for foundation of manholes.

PCC (1:2:4) type B-0 as in surface channels and drains.

Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished fair and smooth complete all as specified and as directed. Note: water proofing compound shall be measured seprately.

Excavating in post holes (or similar holes) each not exc 0.5 Cum in any type of soil, getting out, returning fillimg in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm thick watering and well ramming and removing surplus soil to a distance n, exc 50m and making good surface.

M&L Plain Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including complete all as specified & directed.

Surface excavation to required camber and gradient n.exc 30 cm deep and averaging 15 cm and getting out in any type of soil all as specified

M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface true surface all as spd and directed.

M&L cement concrete 75mm thick, type D2, 1:4:8(40mm graded crushed aggregate) as in sub-base complete all as spd and directed.

M&L for Rolled mild steel as in roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings & heavy bracket frame (beam, tee, angle channel or flat section) in distance pieces, cleats etc confirming to Fe-410-W(grade-250, quality"A') including one shop coat of zinc chromate primer paint before fixing in position.

M&L for mild steel tubular poles or trusses etc including special shaped washer etc. complete using ERW or induction butt welded tubes, confirming to IS-1161-1979 grade St-240 including one shop coat of zinc chromate primer paint.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

M&L painting with synthetic enamel paint two coats including preparing the new steel surfaces of any description over 10cm in width or girth.

M&L 40mm thick cement concrete type B1, 1:2:4(20mm graded crushed aggregate) as in floor incl fair finished even and smooth without using extra cement complete all as spd and directed.

MAMTA ENTERPRISES