Thanjavur District - Additional Provision and Special Repairs to Guest House at Big Temple in Thanjavur District under Tourism Promotion Council- 2023-2024.

Amount

Additional Provision and Special Repairs to Guest House at Big Temple in Thanjavur.

Chipping of concrete and roughening the surface (W-0036)

Cement concrete 1:4:8 mix using 40mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick., compacting etc., complete complying with standard specifications and as directed.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" including cost and conveyance of all materials to site and all labour charges etc complete (Above basement)

Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc.,) (Above basement)

Supplying and Fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.

Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc., shall be finished smooth with cement mortar 1:3, 12mm thick. and with kraft paper without claiming extra as directed by the departmental officers complete complying with standard specifications.

Pointing with cement mortar 1:3 to full depth of tiles using crudeoil 10% by weight of cement including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm

Paving the Floor with Vitrified tiles in CM 1:3 20mm thick including cost and conveyance of all materials to site and all labour charges etc., complete.

Dadooing with glazed tiles of size 300 x 200 x 6mm including cost and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:3,10mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete

Plastering with CM 1:5,12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete

Exterior Emulsion two coats over priming coat including cost and conveyance of all materials to site and all labour charges etc complete

Plastic emulsion with two coat of wall putty and two coats over priming coat inculding cost and conveyance of all materials to site and all labour charges etc complete

Supply and fixing of Wooden door as per standard departmental specifications including cost and conveyance of all etc., complete.

Supply and fixing of Wooden door as per standard departmental specifications including cost and conveyance of all etc., complete.

Supply and fixing of Wood plastic composit door inculding cost and conveyance of all materials to site and all labour charges etc complete

UPVC Window - Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work (M-0674)

UPVC Ventilator - Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work (M-0675)

Painting two coats over new wood works using ready mixed enamel paint inculding cost and conveyance of materials and all labour charges etc.,complete

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Europeon Water Closet with all fittings and 10 lit capacity flusing tank including cost and conveyance of all materials to site and all labour charges etc complete.

Supplying and Fixing inposition of best quality make White glazed wash basin of size 550x 400mm including cost and conveyance of all materials to site and all labour charges etc complete.

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) (SD 18)

Wiring with 2 x 1.5 sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3pin non interlocking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point (SD 38)

Supply and run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains (SD 66)

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated SC unsheathed copper conductor of 1100 V grade in 25 mm dia GI pipe ( Class'B' ) suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 69)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K Lite ) suitable for suitable for 11W CFL lamp with CFL (SD 83)

Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD Earthing (SD 142)

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. (SD 110)

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD 532)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall (SD 114)

Supply and fixing of Stainless Steel Sink of size 600mm x 450mm x 200mm including cost and conveyance of all materilas etc., complete (M-0552)

Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete. (M-0625)

Fabrication and supply of structural steel grill using structural steel in all aspects as dirercted by the department officers etc., complete

SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL1.5 TR Split Type AC Unit - 5 Star Rated (M-1984)

8mm thick Calcium Silicate Board Designed and Perforated for False Ceiling including cost and conveyance of all materials and all labour charges etc., complete (M-0627)

Supply and fixing of 18W LED Round type Recessed fitting with LED (Lower end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting (SD 531)

Provision for Compound wall

Earth work excavation in all class of Soil except hard rock requiring blasting with intial lead and lift etc. Complete for foundation as per SS 20B.

Supplying and Filling with good river sand including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete.

Cement concrete of grade CC 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete.

RCC1:1 1/2:3 mix using 20 mm ISS HBG metal including cost and conveyance and all lanour charges etc complete

Supply and erection of Steel Centering and all labour Charges etc.complete (Below Basement)

Supply and erection of Steel Centering and all labour Charges etc.complete (Above Basement)

Supply and fabrication of steel including cost and convyance and all labour charges etc complete

Brick work in cement mortar 1:5 mix using country bricks 83/4"x41/4"x21/4" including cost and conveyance of all materials to site and all labour charges etc complete.

Plastering with CM 1:5,12mm thick inculding cost and conveyance of all materials to site and all labour charges etc.,complete

Exterior Emulsion two coats over priming coat including cost and conveyance of all materials to site and all labour charges etc complete

Fabrication and supply of structural steel grill using structural steel in all aspects as dirercted by the department officers etc., complete

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

SRI JAGATHI CONSTRUCTION