Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.7 Craccepted-aoc | ₹1.7 Cr | accepted-aoc |
Tender Value
₹1.6 Cr
EMD Value
₹2.4 L
Closing Date
9 Dec 2025, 9:30 pmClosed
Public Works Department
Executive Engineer
Construction of Bridge at Km 66.75 on Kusugal Hadli Shirol SH-264 Road in Naragund Taluka of Gadag Dist (In Between Raddernaganur and Khanapur)
PWD/2024-25/BR/WORK_INDENT19843
PWD/2024-25/BR/WORK_INDENT19843
Open
Bridges/Culverts
Two Tender Document System(Two Cover)
PWD Division Office Gadaga
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
3.2(b)To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e.2020-21,2021-22,2022-23 ,2023-24 and 2024-25 Satisfactoriy completed (at least 50%) as a prime contractor at least one such simolar nature of work such as Consruction of Bridge Works of value not less than Rs 79.89 Lakhs
Executed in any one year the following minimum quantities of work (Cement Concrete -777.52 cum, Earthwork/ Embakment / Sub grade /Filter Media-1657.61 cum, Steel- 50.52 Tonne, (80% of peak rate of construction)
List of existing commitments and ongoing works
b)Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar nature work such as Construction of Bridge works of value not less than Rs. 79.89 Lakhs
Maximum of Civil Engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. (Financial turn over of previous years shall be given a weight of 10% per year to bring them to the price level of the 2025-26)
3.3 a Each Tenderer should further demonstrate :As per this note, each tenderer should demonstrate availability of few key equipments /machinery for execution of the work . However as per Govt circular no GO-FD/AE 263/EXP12-2022 dt-11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted However it is obligatory for the contractor to use the following machineries for various activities involved in construction as per Morth specification.Name of machinery 1)Excavator like JCB/Hitachi etc 2)Tippers / Trucks 3) Vibratory Roller 4) Air compressor 5) Transit Mixer 6) Concrete Pump 7) Water Tanker 8) Needle 9)Shuttering materials 10)Concrete Batch Mix Plant VibratorConstruction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Assessed Tender Capacity shall be more than the Tendered Amount
PWD Licence copy
Achieved in at least two financial years a Minimum financial turnover (in all classes of civil engineering construction works only) of . Rs. 319.53 Lakhs (as per Go-PW/60/CRM-2021 Dt:- 8-11-2021 ANNUAL TURN OVER certificate with UDIN number is compulsory
Annual Financial Turnover Certifcate for the last fve years i.e from 2020-21 to 2024-25, UDIN is Mandatory in Turnover certifcate.
Liquid assets and /or availability of credit facilities of no less than Rs.53.26 Lakhs (estimated cash flow for 3 months of peak construction period )
Latest Income Tax Clearance Certificate
₹4,000
₹2.4 L
9 Dec 2025
21 Nov 2025
10 Dec 2025
8 Dec 2025
3 Dec 2025
Construction of Bridge at Km 66.75 on Kusugal Hadli Shirol SH-264 Road in Naragund Taluka of Gadag Dist (In Between Raddernaganur and Khanapur).BOX Culvert
Mechanical Means -
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...
Filler joint - Providing & fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing & Technical Specification. Ref to MoRT&H : IRC - 2605 ...
Filler joint - Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up...
Filler joint - Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight. Ref to MoRT&H : IRC - 2605 ...
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705 ---- work should be carried out on site as per instruction of Engineer In Charge
Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2504 ---- work should be carried out on site...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...
Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- work should be carried out on site as per instruction of Engineer...
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- work should...
Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre s...
Cement Concrete Blocks (size 0.5 x 0.5 x 0.5 m) - Providing and laying of apron with cement concrete blocks of size 0.5x0.5x0.5 m cast in-situ and made with nominal mix of M-15 grad...
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. - Boulder Laid ...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...
Formwork , Centering & Scaffloading 3% For Foundation (b) all other types ---- work should be carried out on site as per instruction of Engineer In Charge
Providing and laying in position Cement Concrete for all Foundation works.The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super...
Formwork , Centering & Scaffloading 3% For Foundation ---- work should be carried out on site as per instruction of Engineer In Charge
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Formwork , Centering & Scaffloading 10% For substructures ---- work should be carried out on site as per instruction of Engineer In Charge
Formwork , Centering & Scaffloading 20% For Super structures ---- work should be carried out on site as per instruction of Engineer In Charge
Construction of Bridge at Km 66.75 on Kusugal Hadli Shirol SH-264 Road in Naragund Taluka of Gadag Dist (In Between Raddernaganur and Khanapur).(STAIRCASE)
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of app...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
sec -300 e1w e rb7.zip
Operating Procedures • 5.15 MB
detail specificatin sec 1 500 bituminous.zip
Operating Procedures • 2.08 MB
sec4 concrete-work 1.zip
Operating Procedures • 8.75 MB
sec7 steel work 1.zip
Operating Procedures • 4.85 MB
GADAG 19843 KW-4 BID DOC.doc
Tender Document • 0.36 MB
sec 400 non bituminous 1.zip
Operating Procedures • 0.13 MB
format 1 to 10 newformate 2 for loc.xls
Others - Format 1 to 10 • 0.10 MB
loc - format-2.pdf
Others - LOC Format 2 • 0.10 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .