GE 861 EWS-24/2024-25

Amount

Demolition of cement concrete in ground floor and paving n/exe 15 cm thick below or above GL complete all as specified and directed.

Demolition of brick or stone masonry built in cement mortar including all necessary arches, quoins, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Demolition of reinforced cement concrete of any description (reinforcement cut as reqd to facilitate demolition) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for squared rubble walling, brought upto courses, well bonded, bedded and solidly hearted, built in cm (1:6) complete all as specified and directed.

All as per the description of item No 06 above but except stones complete all as specified and directed.

M&L for flush pointing to square rubble masonry in CM (1:3) complete all as specified and directed.

M&L for brick work with sub class ‘B’ modular brick straight or curved on plan exceeding 6m mean radius in CM (1:6) complete all as specified and directed.

-ditto- All as per the description of item No 09 above but except bricks complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified & directed.

M&L for 15mm thick rendering on other than fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified & directed.

M&L for 50mm thick, PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1, (using 20mm graded crushed stone aggregate) as in grouting of angle posts, pillars, coping, plinth courses, parapets and railings etc including necessary form work complete all as specified and directed.

M&L for PCC 1:2:4 type B-2, (using 40mm graded crushed stone aggregate) as in surface channel and drains complete all as specified and directed.

M&L for pre-cast cement concrete (reinforced) slab type B-1, 1:2:4 using 20mm graded crushed stone aggregates as in manholes cover slab set in cement mortar (1:4) including necessary form work complete all as specified and directed.

M&L for precast cement concrete, type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) louvers and jallies, 40 mm thick (measured solid) including pre-cast pillars of size 125 mm x15 mm in section all mouldings, complete set in cm (1:4) on wall etc. complete all as specified and directed.

M&L for RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate ) as in beams, cantilevers bressummers lintels over 1.5 span beam supported on walls etc complete all as specified and directed.

M& for RCC M-25 design mix as in slabs supported on walls, beams and column in floors, roof landings, balconies, canopies, deck slabs, culverts supported on walls etc complete all as specified and directed.

Form work to edges of concrete flats, breaks in floors, opening in concrete walls, floors and roofs and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide complete all as specified and directed.

Form work to edges of concrete flats ,breaks in floors, opening in concrete walls, floors and roofs and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work all exceeding 10 cm but n exc 20cm wide complete all as specified and directed.

Form work to soffits of suspended slab such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking bending spirally for columns, hooking end and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia cut to length, bent to shape required as in stirrups, spacer and binders etc. complete all as specified and directed.

Dismantling structural steel work including doors, gates, grills but excluding framed truss etc. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F angle iron for posts, struts in fencing including cutting tops, to shape as required, drilling holes, notching for wire, including welding etc, confirming to Fe-290 Gde, E-165 complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars, shouldered, end or riveted or forged into spikes framed guard bars barrel iron doors ladders, framed ballusters walk ways, railings, framed water tanks and similar works confirming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plate, rails braces etc, complete drilling for fixing of steel sheeting, hanging, fastening and fixing complete all as specified and directed.

S&F in repairs for galvanised , 2 strand , steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs, 75 mm spacing and straining and fixing to any type of standard rails and straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in sub for receiving floor finishes etc. complete all as specified and directed.

M&L for chequered cement concrete tiles glossy finished 30cm x 30cm x 25mm thick with grey cement and pigment, set, jointed and pointed in neat cement slurry in floors laid over and including 15 mm thick screed bed in cm (1:6) complete all as specified and directed.

M&L for 100 mm thick PCC (1:2:4) type B2 (using 40 mm graded crushed stone aggregate) as in hard standing floor finishes etc. laid in alternate panels complete all as specified and directed.

M&L for coloured machine pressed precast concrete interlocking paver blocks any shape and size conforming to IS 15656-2006 of 60 mm thick M-35 grade with grey cement and pigment complete all as specified and directed.

-Ditto- All as per the description of item No 34 above but except tiles incl dismantling of old tiles and refixing the same complete all as specified and directed.

M&L for sand filling under floors including punning and compaction for receiving to interlocking tiles complete all as specified and directed.

M&L for preparation of new surfaces of steel over 10cm in width or girth with two coat of synthetic enamel paint over coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparing new plastered or un plastered surfaces of walls and applying two coats of cement base paint on walls over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing old plastered or un plastered surfaces of walls and applying two coats of cement base paint on walls complete all as specified and directed.

M/S A.N CONSTRUCTIONs

M/S SMA and SONS CONSTRUCTIONS

M/S SHEIKH FEROOZ AHMAD

FIRDOUS AHMAD BABA

SAMEER CONSTRUCTIONS