Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC 92 R BIDHAN MARKET SILIGURI 734006 | SILIGURI | DARJEELING | WEST BENGAL | 734006 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹15.3 L+₹77,520 (5.33%)Rejected-Finance ATUL PRASAD SARANI E V PALLY HAKIMPARA SILIGURI | SILIGURI | DARJEELING | WEST BENGAL | 734001 | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹15.4 L+₹85,085 (5.85%)Rejected-Finance RAJA RAM MOHAN ROAD HAKIMPARA SILIGURI 734001 | SILIGURI | DARJEELING | WEST BENGAL | 734001 | L3 | Rejected-Finance Being L3 |
Tender Value
Refer Docs
EMD Value
₹29,000
Closing Date
19 Oct 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER, DARJEELING ELECTRICAL DIVISION
Opposite of PWD Inspection Bungalow Kachari Road, Siliguri 734001, District Darjeeling
Upgradation, modification and renovation of existing E.I. system of the State Guest House, Siliguri, Dist. Darjeeling.
2022_WBPWD_412310_1
WBPWD/EE/DED/e-NIT- 31 of 2022-23
Open Tender
ELECTRICAL WORKS ORG
Item Rate
30 days
SILIGURI
Please refer Tender documents.
4 documents required · 4 mandatory
₹29,000
9 Dec 2022
29 Sept 2022
21 Oct 2022
29 Sept 2022
19 Oct 2022
29 Sept 2022
Amount
S&F of following way double door upto 160A VTPN MCBDB for MCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 4 WAY For pump room (A) 415V, 63A, FP Isolator - 1 No. As incommer (B) 415V,32A(C Curve 10 KA) TPMCB- 3Nos. c) 415V,40A(C Curve 10 KA) SPMCB- 3Nos. (Make- ABB/Schnider/seimens/L&T/Cabtree)
S&F sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bars Alluminum 125A 85mm long
S&F double door 2+4 way dd SPN MCB db with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suita ble size of copper wire and neutral link & provision for earthing attachment. INCOMMING: 40ADP Isolator-----01no. OUTGOING: 6-10A sp mcb ------ 4 nos [Make:SIEMENS/ABB/L&T]
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision/ AKG/Polycab make) incl. necy. fittings as required
2 x(6 sqmm) + 1 x(4 sqmm) ECC from BBC to SPN
2 x(2.5 sqmm) + 1 x(1.5 sqmm) ECC for Power point
3 X 1.5 sqmm
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insul ated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3mm thick &incl.175mmx100mm x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. Average run 6 mtr
S&F 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x 100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex coverand making necessary connections as required
Supply & Fixing 240 V, 6A, plug socket with separate 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required.
Supply & Fixing 240 V, 2X6A, plug socket with separate 2X6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200 mm x 150 mm x 65 mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex coverand making necessary connections as required.
Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 9",
Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI 23 cm Exhaust fan (9")
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.
S&D 220V, 50Hz, 22W PC body LED tubelight set for domestic use only [Make: HAVELLS HIGH WATTAGE (ALUMINIUM BATTENS)/PHILLIPS/CROMPTON]
S&D 220V, 50Hz, 1200mm sweep 380 RPM 75W ceiling fan [Make: ORIENT-Summerking)/USHA-Striker//CG-seabreeze/Havells ]
S&D 220V, 50Hz 9" sweep 1380 RPM metal body exhaust fan [Make: CG Flux Air/Orient/Havells]
S&D 220V, 50Hz 200mm sweep 2100 RPM PVC body exhaust fan [Make: Polar CLEAN AIR PASSION WHITE /Orient/Usha]
S&D 220V, 50Hz, 9W warm colour LED bulb [Make: Phillips/CG/Havells]
S&D 220V, 50Hz, 5W CDL LED bulb [Make: Phillips/CG/Havells/]
S&D 220V, 50Hz 6W surface mounted round warm colour 3000k LED light [Make: Crompton PEARL ULTIMA -LSCRM-6W-WW/or Euivalent of Phillips/Jaquar]
S&D 220V, 50Hz 18W surface mounted round warm colour 3000k LED light [Make: Crompton PEARL ULTIMA -LSCRM-18W-WW/ or Euivalent of Phillips/Jaquar]
S&D 220V, 50Hz 30W 4kV inbuild SPD LED flood light [Make: BAJAJ GLEAM F 33L WH SY PC SD V2/ or Equivalent of Phillips/Jaquar]
S&D 220V, 50Hz 100W GLS incandescent lamp [Make: Phillips/Surya/]
S&D 220V, 50Hz 40W fluroscent tubelight [Make: Phillips/Surya]
S&D 220V, 50Hz, 40W fluroscent tubelight starter[Maake: Phillips/Surya]
S&D 220V, 50Hz 20W, 2100lm T8 LED tubelight[Make: Phillips Essential LEDtube 1200mm 20W865 T8 IND I - 2100lm/Crompton/Bajaj]
S&F of LED PLL Lamp of 18W, 4PIN make(Philips/Wipro/Bajaj)
S&D 220V, 50Hz 6A Modular type Switch [Make: Anchor /crabtrre /Legrand]
S&D 220V, 50Hz 16A Modular type Switch [Make: Anchor /crabtrre /Legrand]
S&D 220V, 50Hz 6A Modular type 5 pin Plug Socket [Make: Anchor /crabtrre /Legrand]
S&D 220V, 50Hz 16A Modular type 6 pin Plug Socket [Make: Anchor /crabtrre /Legrand]
S&D 220V, 50Hz Modular Soket type 2 module regulator[Make: Anchor /crabtrre /Legrand]
S&D 220V, 50Hz, 5 A, piano key type Switch [Make: Anchor /crabtrre /Legrand]
S&D 220V, 50Hz 5 A, 3 pin Piano flush type Socket [Make: Anchor /crabtrre /Legrand]
S&D 220V, 50Hz Step Type Electronics Fan regulator [Make: Anchor /crabtrre /Legrand]
S&F 220V 50Hz 10W IP-65 protection LED BOLLARD for garden lighting incl fixing the light in the present base by nuts and screws.[Make: CROMPTON MAYA-III LBLA3-10-CDL /or Equivalent of PHILLIPS/Jaquar/BAJAJ]
S&F 220V 50Hz 45W 3000K 2' X 2' LED surface mounted down light to be fixed in ceiling after dismantalling the old PL fittings.[Make: BAJAJ BZSSQL 45L LED WH GX/Crompton POLARIS NIO - III LCTLSNE-36-FO-WW/or Equivalent of PHILLIPS/ HAVELLS]
S&D 220V, 50Hz wireless calling/door bell with remote.[Make:Havells Tango/ Anchore/As per choice of EIC]
S&F 220V 50Hz 400mm sweep metal wall bracket medium speed fan [Make: CROMPTON /ORIENT/ USHA/Havells]
SITC of 220V, 50Hz, 65" LED smart TV android based having 4k UHD resolution version 4.2, HID ( mouse, keyboard connectivity)/ HOGP (low Energy device connectivity)/ SPP (Serial Port Profile) with 10W+10W dual speaker dolby certified audio, google play store, pre installed wifi connection. with ONE YEAR COMPREH ENSIVE WARRENTY incl installation by company professionals. [Make: SONY KD-65X80J IN5/ or Equivalent of SAMSUNG/LG ]
S&D 2TR capacity HI Wall type Air Conditioner Refrigerant R410A/R32, Copper Condenser & Cooling coil & Wireless Remote Handset rated power supply-230V-1ph-50Hz. , Room Discharge Air-flow:- 1120Cu. Mtr./Hr. & Noise level-35dB with 3 star rating Non Inverter Make: Mitsubishi Electric/O General/Zamil]
Installation charges of all auxiliary equipments like Cu pipe, Insulation, water Drainage pipe, Cu cable of suitable size etc of 2 Ton Split R.A.C. Machine incl. making arrangement for fitting out door unit by suitable size angle iron holder as per direction of E.I.C. By company professionals.
S&F 240V, 20A, 300mA DP RCBO with Conforms to IEC 61009-1, IS 12640-2, EN 61009-1 Short circuit breaking capacity = 10kA incl Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. [Make: L&T AUF3C202030/ABB/Havells]
Supplying and fixing 415V, 100A TPN SFU open execution in existing SS enclosure /cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make: L&T/ABB/SIEMNS]
M :- LIGHTING CONDUCTOR :- S & F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4 SWG GI (Hot Dip) wire at top duly soldered with 7/16 stranded GI (Hot Dip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. complete duly grouted on the parapet etc. in CC mortar ( 4:2:1), including thimble joints of 7/16 SWG wire and GI strip with SS nuts, bolts & washers.
Supply & fixing GI (Hot Dip) strips 25 mm x 6 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works, including welded lap joints, 'T' joints, etc. and painting the joints with 2 (two) coats of bituminous paint.
Supply & fixing of GI (Hot Dip) strips 25 mm x 6 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work, including welded lap joints, 'T' joints, etc. and painting the joints with 2 (two) coats of bituminous paint.
Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 15 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works: i) Length upto 0.5 Mtr
ii) Length above 0.5 Mtr
Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run.
Supply & Fixing of Testing Joints by 25 mm x 6 mm thick GI (Hot Dip) strip 125 mm long on wall after making suitable arrangement to establish a clearance of 50mm from wall for making junction connection with vertical conductor and conductor from earth electrode complete with S & F GI bolts, nuts, check-nuts, spring washers etc. and provide a protective arrangement for that junction point by keeping it in a GI housing / enclosure (openable for maintenance procedure) , as required.
Earthing with 65 mm dia GI pipe (TATA-Medium) 3.0 Mts. long with welded half circle bracket of GI strip (65 x 8) mm. with two holes on extended portion of the strip of length min. 200 mm , and 1 No. 50 mm x 6 mm galvanized (Hot Dip) steel strip (4 Mts. long), 20 mm dia x 125 mm long galvanized bolt, double nuts, double washers including finishing both ends by making holes etc. and S & F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts. --- For LC.
Supply, Laying & Fixing of 50mm x 6mm galvanized (Hot Dip) steel strip in underground trench for interconnection between the Earth Points by proper welding and painting the lap & 'T' joints with 2 (two) coats of bituminous paint for making a Earth Grid.
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required
S&D 220V, 50Hz 2.5mfd fan capacitor[Make: Universal/Tibcon/]
S&D 1.1kV grade FR 1.5sqmm copper conductor [Make: Havells /Kei/Polycab/RR]
S&D 1.1kV grade FR 2.5sqmm copper conductor [Make: Havells /Kei/Polycab/RR]
S&D 1.1kV grade FR 4sqmm copper conductor [Make: Havells /Kei/Polycab/RR]
S&D 1.1kV grade FR 6sqmm copper conductor [Make: Havells /Kei/Polycab/RR]
Supplying & laying of 1.1 KV. Gr. armored XLPE Al. LT cable of following rating on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting for connection from LT main panel, from LT panel to VTPN as per GS.[Make:Kei/Polycab/Havells]
b) 4 core X 25 sq.mm.
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE armoured cables as below :
a) 4 core X 25 sq.mm.
Finishing the end of following XLPE armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :
a) 4 core X 25 sq.mm.
S&L of 1.1kv gade 3 core 2.5 sq mm PVC Cu. Cable through havy quality 25sq mm PVC Role pipe through underground as to GS
Muffing for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box for installation of Bollard
RAJESH ENTERPRISE
M/S. P K ENTERPRISE
technical_812175.pdf
PDF • 0.34 MB
techsummary_812175.pdf
PDF • 0.44 MB
finance_812175.pdf
PDF • 0.26 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_812175.pdf
PDF • 0.46 MB
WO31.pdf
PDF • 0.53 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .