IMPROVEMENT OF EXISTING CANDIDATES WAITING AREA AT 12 ASC ADN CERTAIN MAJOR REVENUE WORKS AT AFS BEGUMPET UNDER GE (AF) HAKIMPET

Amount

Dismantling AC corrugated, semi corrugated sheets in roof covering complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding and Ridge to wall, fixed with self tapping screws as specified and as directed

M&L Preparing old steel Surfaces of any any description over 10cm width or girth and appling two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F Mild angle/flate iron/chanel framed work such as iron gate, ladder, SWT rame, grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 , finished even and smooth without using extra cement

M & L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in copings.

M&L for Preparing new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

M&L 25 mm thick PCC 1:2:4 type B1 (Using 20mm graded stone aggregate) in sub base of floorings.

M&L for Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jonted with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

All as per item No -12 here-in-before but on verticle surfaces.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in all type soil complete all as specified any type soil.

M&L for Broken stone or boulders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate finishing surface even and smooth without using extra cement

S&F Chequered cement concrete tiles 30 cm by 30 cm by 25 mm thick with grey pigment cement and pigments, set, jointeded and pointed in neat cement slurry in floors, path and hardstanding.

S&F mild steel Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) (Fe 410w (Gde-E-250) quality-A) including distance pieces, cleats etc. complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 complete all as specified and directed.

Demolition of un-reinforced cemnet concrete in ground floors and pavings not exceeding 15 cm thickness.

M&L sand filling under floors of interlocking tiles including watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete with rey cement and pigment interlocking paver block any shape and size confirming to IS-15658 -2006 of 60 mm thickness M 35 grade with gray cement complete all as specified and directed.

M&L 75mm thick PCC 1:3:6, type C-2 (40 mm graded agg) as in path, Hardstanding, plinth protection and similar work complete all as directed.

Removing excavated material/soils/Debris to a distance exc 500 mtsr anc not exc 1500 mtrs, deposting where directed at a level not exc. 1.5 mtr above the starting point all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in any type of soil.

M & L for excavating in trenches, n.exc. 1.5m wide and n. exc 1.5m in depth, for foundation, etc and getting out in any type of soil, complete all as spd and directed by Engineer-in-charge.

M&L for Cement concrete Type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete

S & F MS posts and struts in fencing including cutting tops to shape as directed, drilling holes notching for wire etc ; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or rivetting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engineer-In-Charge.

Fixing only Chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed by engineer-In-charge.

Supply only PVC coated Chain link fencing 75 mmx 75 mm (Electriplating GI 2.5mm wire + 1.5 mm PVC Coating) 4 mm wire dia after PVC coating.

M & L TMT bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for columns hooking ends and binding with and including mild steel wire annealed not less tan 0.9 mm dia or securing with clips quality conforming to round barsconfirming Fe-410-W(Gde.E-250), complete all as specified and as directed by Engineer-in-Charge.

Mild steel screw or bolts (machine made) with hexoganal or square heads at one and screwed the other, or screwed both ends each screwed end to be filled with washers and hexogonal or square nut ,not exceeding 5cm long but not exc 10 cm long and diameter of neck 5 to 10mm complete all as specified and directed by Engineer-In-Charge.

Returning, filling incl spreading leveling watering and well ramming in layers n exc 25 cm thick each layer complete all as specified and directed by Engr -In Charge.

Removing excvated soil to a distance n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed by Engr -In Charge.

M&L for preperaing new plastered surfaces of wall and applying three coats of white wash all as specified.

All as per above 33, but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete

M&L for formwork to flat rough finished sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work vertical or to batter complete all as specified and as directed

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; window grill walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out any type of soil.

M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation filling and mass concrete complete all as specified and as directed.

M&L for use and waste Formwork to sides of pillars, post, stuts, coloumn and stanchirns rough finished surfaces of concrete square, rectangular or polygonal complete all as specified.

M&L for use and waste Formwork to rough finished surfaces of sides and soffits of floor or roof beam, beam haunching, lintels, cantilevers, shelves including supports, overhangs etc complete all as specified

M&L TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips conform (Fe-410w or Fe-290) as specified.

M&L RCC Nominal Mix, 1:2:4 Type B1 (20 mm graded stone aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete

M&L for RCC Nominal Mix, 1:2:4 Type B1 (using 20 mm grade stone aggregate) for columns, pillars, piers, posts and struts etc all as specified

M & L for RCC Nominal Mix, Type B1 1:2:4 (using 20mm graded stone aggregate) for lintel Beams catileveres bressummers, lintels over 1.5m span and similar work complete all as specified and directed

M&L Plate (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment

M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) of 75mm thick as in Sub-floors, Sub-Bases, Floors, plinth protection and Pavings, etc., complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B-1(20mm graded aggregate) of 50 mm thick as in floor finishes, complete all as specified and as directed.

M&L for Forming 12mm thick 100 deep Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.

M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F for fixing 12mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with sunk or raised moulding or over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and as directed.

M&L for preparation of new plastered/ceiling surface and applying two coat of distemper complete all as specified and as directed by Engineer-in-Charge.

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms, stair case and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade (Screed bed shall be measured and paid for separately)

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of Dado/ Skirting complete all as specified and as directed.

M&L for Glazed ceramic Coloured tiles 450 x 350 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and as directed.

S&F Colored Non Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

S&F in repairs of Vitreous China wash down water closet pan (pedestal pattern), white including 10 ltrs PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 10cm but n exc 20 cm girth all as specified and directed

Taking down or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

Supplying and laying 16mm of CPVC pipes SDR11 & Plain CPVC SDR 11 fitting on walls/ceiling or laying in floors complete all as specified

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames)

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and as directed by Engineer-in-charge.

Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

M & L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.

M&L for complete removal of existing treatment on wall (Upto plaster surface) and preparing the surfaces and applying two coats of oil bound distemper over a coat of Alkali resistant Primer on 3 mm thick wall care putty, complete all as specified and directed.

M&L for preparation of existing old painted surfaces of walls and applying one coat of cement based paint, complete all as specified and directed.

S & F 500 Ltrs capacity Rotational moulded, polythene water storage tanks incl suitable nipple( cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks all as specified and directed.

S&F in repairs 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore pipe all as specified and directed.

Supply and fix solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 30 mm thick factory made PVC rigid frame panel door shutter made from MS tubular frame of gauge 19 x 19 mm style and 15 mm x 15 mm top and bottom rails MS frame to be covered with 5 mm thick heat moulded PVC 'C' channel of size 50mm x 30mm for stiles with 5mm thick PVC sheet (50 mm wide for top rail, 75 mm wide for lock rail and bottom rail on either side). Paneling of 5 mm thick PVC sheet to be fitted in the MS frame, sealed to the styles and rails with 25 mm thick PVC sheet beading on either side and joined together with cement solvent adhesive complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 200 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 150 mm size extruded aluminium door handles fabricated type fixed in repairs complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkats or frames exc. 1.5 Sq mtr but n. exc 4.0 sqm each with shutters without taking off shutters from the frames complete all as specified and as directed by the Engineer-in-Charge

M&L for powder coated aluminium frame for doors, windows (fixed/ sliding), ventilators with one or more rebates including joining cleat for fixing etc. including Powder Coating (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

S& F Anodised aluminium door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed. Note : Glass will be measured and paid seperately under relevant item

M&L for Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified

M&L for 12mm thick plywood, grade BWR, type BB, fixed complete all as specified and as directed.

M&L for Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified

Supply and fix vitreous china ware wash hand basin 550mm x 400 mm size flat back or angle including new bracket and making good all connections in repairs complete all as directed by the Engr-in-Charge.

S&F for Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F 32mm Dia PVC waste pipe for sinks or wash basines etc,. in repairs complete all as specified and as directed by the Engr-in-Charge.

Supply and fix 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixed in repairs complete all as directed by the Engr-in-Charge.

S&F Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed complete all as specified and as directed.

S&F angle valves, cast copper alloy, chromium plated crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.(15mm bore).

Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

M&L for unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches

M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

Supply and fix Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, fancy type with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in repairs all as specified and directed.

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) and fixed in repairs all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed in repairs all as specified and directed.

S&F Grating doom 100mm dia of PTMT (Minimum weight 25gms) and fixed in repairs all as specified and directed.

S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and as directed.

S&F for 15mm dia Two way tap CP fancy type fixed to GI pipe complete all as specified and as direted by Engr-in-charge.

S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and as directed.

S&F of 18mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face; fixed with screws complete all as specified and as directed.

Extra over rates of block board or veneered particle board or plywood for external teak wood lipping, 6mm thick fixed with nails 18 mm thick all as specified and directed

M&L for 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions

S&F of 75 mm Brass barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed

S&F of 100 mm long chromium plated brass handles fancy type all as specified and directed

S&F of Cup board lock brass 4 levers all as specified and directed

S&F of Stainless steel auto closing cup-board hinges

M&L for use and wase Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) for fair finished surface complete all as specified and as directed.

Taking down copper / aluminum point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, lamp holders, light fittings etc removing materials and making good disturbed surfaces of walls, floors etc, including paint touch up to match with the existing surface as per site requirement, complete all as specified and directed.

Taking down carefully MCB, DB SPN/TPN, Metal P&S alongwith MCBs complete and taking credit all as specified and as directed by Engr in Charge

M&L for Point wiring complete with 1.5 sq mm single core PVC insulated FRLS cable, with multi standard copper conductors, 1100 volts grade, drawn through and including non metalic, med. grade rigid PVC conduit with all conduit accessories (including concealing and finising to match with the sorroundings in brick wall and remaing on surface of iron truss / pole) and including provision of 1.5 sq mm PVC indulated copper cable FRLS as earth continiuty conductor, fabricated steel teminal box made of MS sheet concealed in walls and cover with 3 mm thick hylum sheet for fixing switches, socket outlets, fan regulators etc, all as specified and directed .

(a) One light point controlled by one way switch.

(b) One ceiling fan/ exhaut fan point controlled by one one way switch.

(c) One 3 pin socket outlet 5 Amps on the same board with other switch

(d) One 3 pin socket outlet 5 Amps on the Independent board.

All as per item here-in-before but with 4 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor, complete all as specified and directed.

S&F Switch piano flush type, single pole one way 5 Amps 240 volts, complete all as specified and directed.

S&F stepped type electonic fan regulator flush type complete all as specified and directed

Supply and fixing for ceiling rose 3 terminals

Supply and fix Switch socket combination 2 in 1, 5 Pin, 5 Amps flush type, complete all as specified and directed.

Supply and fix Switch socket combination, 3 pin, 5 and 15A, 5 in 1 flush type, complete all as specified and directed.

Supply and fixing suspended archictural LED luminaire of 20 Watt (fixture size 1200 x 106x61 mm) with necessary suitable suspended arrangement and continuous mounting end cap complete all as specified and directed by Engr-in-Charge. Make : Havells Cat No CONSTA1144LP20WLED830/840SPCWH or equivalent in Crompton / Bajaj / Phillips

Supply and fixing vertical surface LED luminaire of 30 Watt mounting with pressure die cast aluminium housing complete all as specified and directed by Engineer-in-Charge. Make : Havells Cat No STUPEWGP30WLED757SSYMTOPCGRY or equivalent in Crompton / Bajaj / Phillips

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.complete all as specified and directed.

Supply and fixing vertical down rod made out of GI pipe 15 mm dia med grade of required length alongwith suitable clamps and arrangement for fixing one end with MS angle iron / pole and other end with fan complete all as specified and directed.

Supply and fixing Vertical Tripple Pole and Neutral (VTPN) distribution board for incoming MCCB upto 250 A and MCBs for outgoing to be used, VTPN 4 Way, 415 Volts having earth bar & neutral link double door complete all as specified and directed. Note. MCCB and MCB will be measured and paid seperately under relevant items.

Supply & fix MCB DB SPN 8 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and directed.

Supply & fixing MCCB fixed type, 25 to 100 Amps with breaking capacity 16 KA complete all as specified and directed.

Supply & fix following item including necessary connection in incoming and outgoing complete all as specified :-

(a) MCB SP 6 to 32 Amps 'C' Curve

(b) MCB SPN 40 Amps 'C' Curve

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through & including PVC Conduit pipe 20 mm dia with all fittings complete all as specified and directed.

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in soft/loose soil for laying of under ground cable and foundation of poles.etc complete as specified and as directed.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection in trenches / ducts complete all as directed. (Note: The punned down thickness shall only be measured)

Material and labour for brick sub class 'B' to be laid in trenches as protection to cable all as specified and directed.

M&L for road cutting /Hard standing for taking up or laying of LT UG Cable upto a depth of 15cm, after laying of cable well ramming to the excaved soil and repair the excavated portion of the road as existing or by providing suitable mixture of PCC complete all as specified and directed

M&L for 40 mm bore galvanized iron light grade pipe for cable protection complete with all fittings fixed to wall or laid in floor/road crossing or on pole, complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and as directed

M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion NOTE: GI Pipe for protection of earthing strip and earth strip beyond 7.5m or test point shall be measured and paid seperately under relevant items complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 6A flush type

S&F Switch socket combination, 2 in 1, 3 Pin, flush type 5 Amps.

S&F switch socket combination, 2 in 1, 5 Pin, flush type 5&15 Amps.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket (AC Box) complete with one MCB SP 20A single pole MCB complete concealed in walls all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engineer in Charge

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder LED tube light fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative batten type with driver, holder LED tube light fitting connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Taking down existing ceiling fan/ Exhaust fan from it's position and re-fixing the same after cleaning the dust and connecting up including provision of cable from ceiling rose/ connector to fanall as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed.

Providing suitable hole in brick /stone masonary or any type of wall for exhaust fan of upto 300 mm sweep and repair to the wall to give smooth finish as existing to the disturbed surface of wall all as specified and as directed

Supply & fix MCB DB TPN 4 way double door with neutral bar etc complete concealed in walls all as specified and directed. (Note: Incomer & outgoing MCBs will be measured and paid seperately)

Supply & fix MCB DB SPN 12 way double door with neutral bar etc complete concealed in walls all as specified and directed. (Note: Incomer & outgoing MCBs will be measured and paid seperately)

Supply & fix MCB TPN 63 AMP, 10KA, C Curve, 240V all as specified and directed.

Supply & fix MCB SPN 40 AMP, 10KA, C Curve, 240V all as specified and directed.

Supply & fix MCB SP 6-32 Amps, 10KA, C Curve, 240V all as specified and directed.

M&L for Sub main wiring complete with two runs of 2.5 Sq mm Single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with One run of 2.5 Sq mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including suitable size of PVC conduit and accessories complete all as specified and directed.

M&L for Sub main wiring complete with two runs of 10 Sq mm Single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with One run of 10 Sq mm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing PVC Conduit including taking down old u/s sub main wiring complete all as specified and as directed.

VACON INFRASTRUCTURES (BID ID -3115105)

NEWS CONSTRUCTIONS (BID ID -3115790)

M/s D.Krishna Varma (BID ID -3114453)

K LAKSHMAN SINGH AND CO (BID ID -3109669)

KOGANTI CONSTRUCTION COMPANY (BID ID -3114206)

M/S P.SWAROOP KUMAR (BID ID -3116228)

STANDARD AGENCIES (BID ID -3115924)