Provision of Lighting arrangements to the construction of Grade separator at Km 1/2 of Madurai to Thondi Road (SH 33) including lighting arrangements to the junction (Near AAVIN) at Km 0/0 and 0/4 at Madurai in Madurai District

Amount

Supply and erection of 8m free standing single arm bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3mm The pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron. The octagonal pole shall be erected with bridge PCD aadpter in cantilever assembly with 250mmx250mmx76mm GI plates with cntre hole of bottom pole dia (130mm) surrouded with four hole arrangement with 8mm thick stiffener GI plate, 4 Nos M24x150mm bolt with nut & washer and 4 Nos M24X350mm bolt with nut & washer.

Supply and fixing of 1No 150W LED street light luminaire (Higher End) with hot dip galvanised single arm bracket of suitable length with suitable bolt and nuts with 1.5 sqmm PVC insulated SC unsheathed FRLS copper wire of 24 mtr length from junction box to the fitting. The integrated junction box with pole should be provided with 1No. 4way terminal block with Hylum sheet and 1No 6A SP MCB in suitable size door at the bottom with locking arrangements and necessary connection complete. The pole and bracket should withstand wind speed of 180 Km/Hr. All the nut, washer and bolt should be galvanised. Testing and commissioning should be done as directed by the departmental officers.

Supply and erection of 8m free standing double arm bracket 8 sided Octogonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3mm The pole should be hot dip galvanized confirming to BESN ISO- 1461 with thickness of 65 Micron. The octagonal pole shall be erected with bridge wall PCD adapter in cantilever assembly with 250mm x 250mm x 16mm GI plates with centre hole of bottom pole dia(130mm) surrounded with four hole arrangement with 8mm thick stiffenner GI plate, 4nos M24 x 150mm bolt with nut & washer and 4nos M24 x 350mm bolt with nut & washer.

Supply and fixing of 2Nos 150W LED street light luminaire (Higher End) with hot dip galvanised double arm bracket of suitable length with suitable bolt and nuts with 1.5 sqmm PVC insulated SC unsheathed FRLS copper wire of 48 mtr length from junction box to the fitting. The integrated junction box with pole should be provided with 1No. 4way terminal block with Hylum sheet and 2Nos 6A SP MCB in suitable size door at the bottom with locking arrangements and necessary connection complete. The pole and bracket should withstand wind speed of 180 Km/Hr. All the nut, washer and bolt should be galvanised. Testing and commissioning should be done as directed by the departmental officers.

Supply and fixing of 100W LED flood light Luminaire integrated driver of IP66 rating antiglare fitting with suitable bolts and nuts with SMC Junction box to house 1 No.of 6A SP MCB and 4 way terminal block with PVC unsheathed FRLS Copper leads with necessary connection etc. (For under deck lighting)

Supply and clarnping of 4x16sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and clamping of 4x16 sq.mm PVC armoured LTUG Alu. cable through HDPE pipe on wall / post with MS clamps.

Supply and providing cable end termination of 4 x 16 sqmm PVC LTUG armoured Al cable with necessary Al cable sockets by crimping etc. with electrical connection complete.

Supply and fixing of brass cable gland suitable for 4x16 sq.mm PVC LTUG armored Alu. cable with earth connection.

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigd pipe on wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire with painting of suitable colour.

Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire for service connection mains.

Supply and Run of 4 of 10 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in 32mm dia GI pipe (class B ) suitably bent at both ends with necessary angle iron upright and end support for service connection mains.

Supply and fixing of fabricated street light control panel of size not less than 3' x 3' x 1.5' made out of 16SWG CRCA sheet steel with lock and key arrangements painted with powder coating charges with necessary superscribing & danger sign to be mounted on a suitable concreting pedestal with necesary supports with following provisions : 1) Supply and fixing of digital weekly programmable timer switch with shortest switching time of 1 minute to turn on /off the lights. 2) Supply and fixing of 63A Four pole contactor 3) Supply and fixing of Vertical type 8 way triple pole neutral MCB distribution board in sheet steel enclosure double door type (Metal) with IP42 protection with 1 no. 63A 4 pole MCB as incoming,8Nos 32A 3pole MCB as outgoing with earth connection complete. The MCB DB and MCB's should be Higher End only.

Supply and fixng of TNEB meter board suitable for 3phase 63A service connection made up of suitable angle iron frame work of size 2feet x 1 - 1/2 feet using angle iron of size1-1/2" x 1 - 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2feet x 1/2feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 63A fuse units (500V), 1No. neutral link, copper earth flat of size 1" x 1/4" with interconnection of EB meter to fuse units by 16Sq.mm PVC insulated copper wire with 1No 63Amp 30MA FourPole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete.

Supply and fixing of 3 Phase 63A aerial fuse unit for 3 Nos 63A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps.

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.

Supply and Run of 1 of No.8 SWG copper wire for earth connection.

Highmast (16 Metre) with 8 Nos. 150W LED Fitting. Design, supply, erection, testing and handing over of High Mast Structure Bajaj/ Philips/ make with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip joints to a total height of 16 meters capable of sustaining the maximum wind pressure at the erection site with single flange base plate secured welded in the bottom of the base mast section with vertically movable hot dip galvanized lantern carriage and accessories such as electrical junction box brackets for providing 8 Nos. of flood light luminaries with control gear box complete head frame assembly, Pulley drive, stainless steel wire rope single/double drum self lubricating winch arrangement suitable for raising and lowering the luminaries carriage ring flexible multi core

power cable and necessary high tensile hot dipped galvanized foundation, bolt & nuts along with washers and anchor plates and templates including supply and fixing the following accessories in the Mast a) Design and casting of suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 1 metre Width x 1 metre Length and 2 metre depth with necessary galvanized foundation bolts nuts and washers and dump plate enclosing the bolts for the High Mast considering the safe soil bearing capacity at site - 1 set. b) High powered power tool complete with hand held control panel and motor with push button type remote control switch suitable for 3 phase 415 V 50 HZ for raising and lowering of the lantern carriage complete to operate all fittings mounted in the base to couple with winch - 1 Set

c) Feeder pillar box comprising 0.90 m x 0.45m x 1,20m floor AI frame with 63A TPN main switch 1 no , 63A fuse unit 3nos., 63A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor - 1 Set. d) Neon aviation obstruction light - 1 No. e) 2 Nos of special GI earth electrodes with copper plate 300 x300 x 3mm and copper flat (1”x1/4”) interconnection as per ISS complete with earth connection - 1 set. f) Hot dip galvanized lightening arrestor -1No. g) Flood light luminaries of specially Heavy type water poof Dust proof integral luminaries fitting provided with 150 Watts LED Light fitting Crompton / Philips make or with 150W LED Bulb with drives, Alglas coated reflectors, with cable connection etc: complete as per standard specification. - 8 nos.

Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3 1/2 x 25 sq.mm PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3 1/2 x 25 sqmm PVC LTUG armoured Al cable with necessary Al cable sockets by crimping etc. with electrical connection complete.

Supply and run of 1 of No.8 SWG GI wire for earth connection.

T PAULKANNU & CO (BID ID -1515411)

ANNAI ELECTRICALS (BID ID -1515428)