PERIODICAL SERVICES, REPAIR TO LEAKAGE, SEEPAGE, OVERHEAD TANKS ETC AND OTHER CERTAIN E/M INSTALLATION AT AF STN FARIDABAD IN AOR OF GE (AF) FARIDABAD

Amount

M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-Charge.

All as per item No 1 above but on ceilings complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of walls by mechanical means including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1mm thick complete all as specified and directed by Engineer-in-Charge.

M&L prepration of old surfaces of walls filling of holes with plaster of paris and applying one coat of oil bound distemper complete all as specified and directed by Engineer-in-Charge.

M&L for two coat of cement base paint on old decorated plastered surface of wall including complete removal of existing treatment by mechanical means & preparation of surfaces complete as as specified and directed by Engineer in Charge.

M&L for one coat of cement base paint on old decorated plastered surfaces of wall including washing rubbing down stopping & preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment of walls by mechanical means including preparing old plaster surfaces filling of holes with plaster of paris and applying two coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or equivalent colour as approved by GE, using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccume based sanding machine complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old decorated wall surfaces , filling of holes and cracks with lime putty or plaster of paris and applying one coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or equivalent colour as approved by GE, using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccume based sanding machine complete all as specified and directed by Engineer-in-Charge.

M & L for applying one coat of external wall care putty 3mm thick on wall surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted surface of steel & iron work of any description not specifically mentioned otherwise over 10cm width or girth & applying one coat of synthetic enamal paint complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 above but on Wooden surfaces complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed by Engineer-in-Charge.

Rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound conforming to IS-2645-1975.

Rendering,15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed by Engineer-in-Charge. Note:-Integral water proofing compound shall be measured and paid separately

M & L 10mm thick rendering in ceilings in CM(1:3) finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for preparing New plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and directed by Engineer-in-Charge.

M&L for newly plaster surfaces and applying two coat of wheather coat/ exterior emulsion paint of electric blue or AF blue colour or equivalent colour as approved by GE, using ultra clean paint of Dulux ICI or Apex Ultima of Asian Paints or equivalent in Berger Paints over the newly plaster wall surfaces , edges of slab, roof/chajja projection and column etc complete all as specified and directed by Engineer-in-Charge.

M & L preparation of new plastered surfaces on ceilings & M & L for applying three coats ofd white wash complete all as specified and directed by Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI vased corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

S & F Pre-painted galvalume aluminum zinc coating GI vased Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

Dismantling mild steel or wrought iron work of any description not otherwise provided for complete all as specified and directed by Engineer-in-Charge.

M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W(Gde-E- 250)quality-A complete all as specified and directed by Engineer-in-Charge.

S&F Rolled mild steel sections as in roof truss(frames),trussed, purlins,crane gantries,rails and fastening and heavy bracket framing(beam,tee,angle,channel or flat sections) including cleats GDE Fe 410-W(Gde-E-250)quality A complete all as specified and directed by Engineer-in-Charge.

Dismantling wall and ceiling boards (fibre pulp insulation etc) or insulation boards, slabs, blankets any thickness, incl cover fillets complete all as specified and directed by Engineer-in-Charge.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per Sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws (with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles). The work shall be carried out as per specifications, drawing and complete all as specified and directed by Engineer-in-Charge.

Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-in-Charge.

S&F in repair CPVC 20 mm outer dia pipes SDR 11 & plain CPVC SDR fittings pipe line to walls & ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

M&L dismantling water tank of exc 250 ltr and not exc 500 ltr Capacity complete all as specified and directed by Engineer-in-Charge.

M&L dismantling water tank of exc 500 and not exc 1000 ltr Capacity complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene 500 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning the complete inner surface by rubber/nylon scraper to remove sludge/silt and washing with bleaching power solution and then clear water, etc. and hoisting in postion if required reconnecting and re-fixing in position(exc 250& n exc 500) complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning the complete inner surface by rubber/nylon scraper to remove sludge/silt and washing with bleaching power solution and then clear water, etc. and hoisting in postion if required reconnecting and re-fixing in position(exc 500& n exc 1000) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) pipes single socketed110mm bore dia, in any length with rubber ring joints, laid in trenches or in floors inclusive fitting, making bell mouth at roof surface complete all as specified and directed by Engineer-in-Charge.

Taking down carefully existing bitumen tar felt including plaster, concrete/brick coba /tiling from the roof /parapets till RCC slab and roughening the surface ,wire brushing , cleaning and washing with water etc. , and removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing where complete all as specified and directed by Engineer-in-Charge.

M&L for Cement concrete type B-0, 1:2:4 25mm thick(12.5mm graded aggregate) complete all as specified and directed by Engineer-in-Charge.

Material and labour for roof treatment on RCC roof slab complete as mentioned below, complete all as specified and directed by Engineer-in-Charge.:- (i) Cleaning the concrete surfaces of RCC roof slab as obtained after demolition/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) M&L for 10mm thick screed bed or bedding layer in CM 1:3 mixed with waater proofing compound @3% by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed by engr in charge. (iii)Cleaning the plastered roof surface and applying a coat of bitumen primer @0.3kg/Sqm on top of dry roof surface (iv) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method all as per manufacturer's instructions.

Taking down storage water heater 25 ltrs capacity from wall for repair/replacement of unserviceable parts and refixing with fasterners Nuts and washers the same after repair work complete all as specified and as directed by Engineer-in-Charge.

M&L for replacement of thermostate 0-60 degree as per sample in water geyser 25/50 litre capacity complete all as specified and as directed by Engineer-in-Charge.

M&L for replacement of heating element 1.5KW,Triangular/round type as per sample, complete all as specified and as directed by Engineer-in-Charge.

M&L for replacement of heating element 2 KW with complete assembly of any model and type as per site requirement /sample complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for disconnecting from electric and water mains and dismantling the unserviceable gyeser base assembly and replacing the new base assembly 6/9 holes with rubber gasket for 25 Ltrs capacity of any make and refixing in original place including recoonecting of electric and water supply mains including testing complete all as specified and as directed by Engineer-in-Charge.

M&L for replacement of geyser outer body cover of 25 Ltr capacity made out of 16 SWG powder coated complete with all connected accessories suitably fitted with existing wall complete all as specified and as directed by Engineer-in-Charge.

M&L for replacement of geyser tank stainless steel suitable for 25 Ltr capacity geyser complete all as specified and as directed by Engineer-in-Charge.

M&L for replacement of PVC connection with brass inserts suitable for hot/cold water, 60 cm long (for hot and cold water inlet and outlet) having PTMT nuts with washer complete all as specified and as directed by Engineer-in-Charge.

S & F in Replacement of bottom cover suitable cylindrical type geyser as per existing required as per site for 25 Ltrs capacity complete all as specified and as directed by Engineer-in-Charge.

Dismantling and opening storage tank of geyser 25 litre capacity to identify the leakage ,repair the spot by suitable welding carefully including making good insulating material, assembling and testing complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement of indication lamp red and green (pilit type ISI marked) for 25 Ltrs water heater complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in replacement of PVC insulated flexible copper conductor cable 40/0.0076 size 3 core suitable for 650 volts grade complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement of glass wool in any capacity of geyser complete all as specified and as directed by Engineer-in-Charge.

M&L submain wiring copper conductor multi stranded 4 Sqmm duly drawn through and including concealed PVC conduit suitable size as sub main with continuous alongwith earth wire 4 Sqmm size and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge..(Flexible Copper Wire Used In FRLS)

S&F Piano switch in repairs, flush button,single pole,one way 5/6 Amp complete all as specified and as directed by Engineer-in-Charge.

S&F piano switch,in repairs, flush button single pole one way 15/16 Amp complete all as specified and as directed by Engineer-in-Charge.

S&F socket outlet, in repairs,flush type 2 in 1, 2 pin and 3 pin 5 Amp complete all as specified and as directed by Engineer-in-Charge.

S&F socket outlet, in repairs,flush type 2 in 1, 3 pin and 6/16 Amp complete all as specified and as directed by Engineer-in-Charge.

S&F stepped type electronic fan regulator, in repairs, flush type on the existing phenolic laminated sheet etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs,Single pole and neutral enclosure with a two pin and earth plug and socketcomplete with one single pole MCB 32 Amp complete all as specified and as directed by Engineer-in-Charge.

M&L in repairs,two single core PVC insulated cable with copper conductor multi stranded 1.5 Sqmm duly drawn through and including concealed PVC conduit suitable size as sub main with continuous earth wire 1.5 Sqmm size and connecting to common earth dolly complete all as specified and as directed by Engineer-in-Charge. (Flexible Copper Wire Used In FRLS)

Supply and fixing amp rating 240V, SP 5 To 32 AMP 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply and fixing amp rating 240V, SPN 40 To 63 AMP 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning.complete all as specified and directed by Engineer-in-Charge.

Taking down ceiling fan complete any type size from existing location and cleaning body blades etc including servicing, greasing,oiling,replacing wornout bearing ,bush and refixing the same at site complete all as specified and as directed by Engineer-in-Charge.

All as mentioned in item No 64 here in above but for Exhaust fan 300 mm sweep complete all as specified and as directed by Engineer-in-Charge.

All as mentioned in item No 64 here in above but for Exhaust fan 450 mm sweep complete all as specified and as directed by Engineer-in-Charge.

All as mentioned in item No 64 here in above but for wall/floor mounted fan 450 mm sweep complete all as specified and as directed by Engineer-in-Charge.

S&F wall mounting fan motor for 450 mm sweep complete all as specified and as directed by Engineer-in-Charge.

Supply only blades suitable for 1200/1400 mm sweep ceiling fan set of 3 blades complete all as specified and as directed by Engineer-in-Charge.

S & F Recess mounted LED Light Fitting 15 Watt pressure die-cast aluminium luminaire in powder coated white finish in round/square profile with optimized heat sink for efficient heat dissipation and incl separate replaceable electronic driver compatible for Analog/DALI Dimming complete all as specified and as directed by Engineer-in-Charge.

Rewinding unserviceable ceiling fan 1200/1400 mm Sweep from site by strip opening,cutting removing the burnt winding from starter cleaning the slots and rewind the same with original guage of super enameled copper winding wire, insulation materials and all accessories & varnishing etc replacement of service wire copper twisted size 23/0.0076 including reassembling the fan complete all as specified and as directed by Engineer-in-Charge.

All as mentioned in item No 71 here in above but for Exhaust fan 300 mm sweep complete all as specified and as directed by Engineer-in-Charge.

All as mentioned in item No 71 here in above but for Exhaust fan 450 mm sweep complete all as specified and as directed by Engineer-in-Charge.

All as mentioned in item No 71 here in above but for wall/floor mounted fan 450 mm sweep complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs Capacitor 2.5 mfd suitable for Ceiling Fan/Wall fan/Exhaust Fan complete all as specified and as directed by Engineer-in-Charge. .

S&F in repairs Capacitor 3.15 mfd suitable for Ceiling Fan/Wall fan/Exhaust Fan complete all as specified and as directed by Engineer-in-Charge.

Supply only FR PVC electrical insulation tape,1.8 cm x 25 mtr x0.125 mm thick complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Ventilation fan PVC (250 mm Sweep) with louvers and acessories complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Ventilation fan PVC (200 mm Sweep) with louvers and acessories complete all as specified and as directed by Engineer-in-Charge.

Supply only aluminium thimbles of size 35 sqmm complete all as specified and as directed by Engineer-in-Charge.

Supply only aluminium thimbles of size 50 sqmm complete all as specified and as directed by Engineer-in-Charge.

Supply only aluminium thimbles of size 70 sqmm complete all as specified and as directed by Engineer-in-Charge.

Supply and laying PVC insulated sheathed aluminum conductor cable 10 sqmm two single core 1100 volts grade multistanded conductor served with inner sheathing of PVC tape and overall PVC sheathed for service connections complete all as specified and as directed by Engineer-in-Charge.

Orbital Infra Power

H.B. Traders