Renovation of office shed and general store shed at BBMB store complex sansarpur terrace by replacing old ACC roofing with new CGI sheets painting and distempring etc.

Amount

Stripping and stacking iron sheets of a roof including ridging, flashing, eaves boards gutters and down pipes.(CSR ITEM No-8.11)

Corrugated GI Sheet roofing 0.80mm thick fixed with galvanized iron J or L hooks 10mm dia, GI Limpot and bitumen washers complete excluding the cost of purling rafters and trusses.(CSR ITEM-13.18)

GI Sheet gutters 0.80mm thick semicircluar 15cm diametre including fixing with clamps and making connections with rain water pipes. (CSR ITEM NO-13.22)

Scraping (a) white wash and colour wash.(CSR-8.31)(a)

Preparation of Plastered surface for distempering including surface applying filling with approved quality filler consisting of plaster of Paris and chalk Mitti including finishing the surface to the required finish complete.(CSR ITEM No-16.6)

Distempering with Acrylic washable oil bound distemper(of approved manufacture) two coats over one priming coat to give an even shade.(CSR ITEM No-16.11)

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacemetc.two or more coats to give an even shade.(CSR-16.13)

Earthwork In Excavation of Foundation of Bridge Culverts ,building, including handling of materials with combined lead of 15 meters dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around-For semi conglomerate or Soil of nature of pick jumper.(CSR ITEM No-6.7 b)

Cement Concrete 1:6:12 with Brick Ballast 40mm gauge mixing by mechanical means using concrete mixer volumetric type.(CSR ITEM No-10.8 a (ii))

First Class burnt Brick Work laid in Cement Sand Mortar 1:6 in Foundation and PLINTH.(CSR ITEM No-11.3)i

Damp proof course 4cm thick of cementconcrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot andsanded.(CSR-10.28)

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure .(CSR-11.36)

Providing and Fixing ceiling consisting of 600mm x 600mm x 12.5mm thick Gypsum Board GI Cradling hanged from the ceiling by means of GI hanger complete as per drawing, specifications and to the entire satisfaction of engineer-in-charge.(CSR ITEM-13.65)

10mm thick Cement Plaster 1:4(CSR-15.6)

Corrugated GI Sheet roofing 0.80mm thick fixed with galvanized iron J or L hooks 10mm dia, GI Limpot and bitumen washers complete excluding the cost of purling rafters and trusses.(CSR ITEM-13.18)

Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3sqm and below.(CSR-8.26)(a)

Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) windows of area 3sqm and below.(CSR-8.26)(b)

Factory manufactured flush door fixed in position iron hings, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same of position.(c) Decorative with teak facing on both sides edges lipped with teak with laminated core.(iv)35mm thick.(CSR-17.27)(c) (iv)

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc complete.(A)300x16mm(CSR-17.49 A)

Supplying pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality fixed in position excluding the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.(d) Doors and windows frame of size 161mm x60mm with 40mm wide double rebate weighing 4.05kg per meter. (CSR-18.24 d)

Supplying openable steel windows of standard rolled steel Z section joints mitered and electrically flash welded with iron fittings including necessary iron handles, Peg stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.(b) Above one sqm area. (CSR-18.20 b)

Wrought iron & mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position.(CSR-18.4)

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.(b) glass panes 4mm or 10.75 kg/ sqm exceeding 0.4 sqm of area.(CSR-18.25)(b)

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5mm width fixed with machine screws complete in all respects.(CSR-18.27)

Appling priming coat with metal primer on new steel or iron work including preparation of surface.(CSR-16.20)

Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work.(CSR-16.21)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.(CSR-16.16)

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.(CSR-16.17)

Nicking cement concrete surface (over 28 days old including preparation and laying slurry.(CSR-10.31)

Providing and laying vitrified floor tiles in different sizes in light colour shades made using soluble salt technology (thickness to be specified by the manufacture) with water absorptions less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 (cement :4 fine sand), complete (soluble salt print penetration should be up to 1 to 2mm after the tiles are fired & polished.(a)size 600x600 mm (CSR-14:112)

Dismantling Sanitary fixtures such as Eurpoean/ Indian/Orissa W.C., PVC/ China warecistern, Wash Hand Basin, Urinal Pot, Sinks andCP Fittings and disposal of dismantled materialwithin a distance of 100 Mtr. complete in allrespect as required by Engineer-in-Charge. Eurpoean/Indian/Orissa W.C.(CSR-30.88)(a)

Providing and fixing in position ChinawareIndianOrisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI makred including cost ofPVC long bend 32 mm dia complete in allrespect and to the entire satisfaction of

Extra for providing and fixing C.P. Brass longflush bend 32mm instead of PVC long bend. .(CSR-30.7)(C)

Providing and fixing in position ChinawareEuropean type water closet P trap or S trap ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI marked, PVC short bend32 mm dia including cost of seat cover complete in all respect and to the entiresatisfaction of Engineer-in-charge.(CSR-30.4)

Providing and fixing jet spray with 2'-6" long PVC pipe. With C.P. Brass nut.(CSR-30.8)(a)

Providing and fixing in position vitreous chinaware white lavatory suites of approvedmake (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm longwithout CP fittings complete in all respect. Size 550 mm x 400 mm x 815 mm.(CSR-30.31)(ii)

Providing and fixing in position C.P. BrassAuto close Pillar Cock of approved make (tothe approval of Engineer-in-charge)(CSR-30.34)

Providing & Fixing in position 5mm thickbevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)Size 600mmx450mm.(CSR-30.61)

Providing and fixing in position towel rails /ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect.C.P. brass towel Rails size 15mm dia610mm long.(CSR-30.58)(a)

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 110mm o/d pipe of 6 Kgf. / sqcm.(CSR-28.13)(xv)

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B Class including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anticorrosivebitumastic paint, testing, cutting, threading Inside building complete. 25mm i/d.(CSR-Item-28.35)(c)

Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) BClass including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosivebitumastic paint, testing, cutting, threading Inside building complete. 40mm i/d.(CSR-28.35)(e)

SEPTIC TANK------- Earth work in excavation for storage and sedimentation tanks, high level tanks, filter beds, clear water reservoirs, pump houses,sumps, screening chambers and other similarworks having straight or open cuttings in foundations trenches etc. with 3D Excavator/ JCB including manually dressing of bed, trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineerin- charge, including dressing of bottom and sides of trenches, stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering dressing and disposal of surplus soils as directed upto 15 metre complete in allrespects.Depthupto 1.5 m B.G.L. For semi conglomerate or soil of the nature of pick and jumper work(CSR ITEM No-29.2)(A)(iii)

Cement Concrete 1:4:8 with stone ballast 20mm gauge. Mixing by mechanical means using concrete mixer volumetric type..(CSR ITEM No-10.11 a(ii))

First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth.(CSR ITEM No-11.3)(i)

Reinforced Cement Concrete M-35 Mechanically batch mixed using batch type concrete mixer as per IS 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in Foundation and plinth (CSR ITEM No-10.18)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.(CSR-9.8)

12.5 mm thick cement plaster 1:4.(CSR-15.9)

Mild Steel reinforcement for RCC work where not including the complete rate of RCC including bending , binding and placing in position complete in all respects:-(i) Up to 20mm dia bars (CSR ITEM No-18.16)

Making soak pit 2.5 m outer Diametre 3.0 metredeep 230mm thick 1:5 brick work honey comb with bricks of Ist Class and S.W. drain pipe 100 mm Diametre, 1.8 m long complete as per standard design.With F.P.S. bricks (CSR-29.48)(A)

Bidder Name

Amount in Words

RANJIT SINGH RANDHAWA CONTRACTOR

S S CONSTRUCTION

RAM PARSHAD VERMA GOVT CONTRACTOR

Rahul Verma Govt. Contractor

Pushpinder Kaushal

RANJIT SINGH RANDHAWA CONTRACTOR

RAM PARSHAD VERMA GOVT CONTRACTOR

Rahul Verma Govt. Contractor

Pushpinder Kaushal