ADDITION / ALTERARTION AND SPECIAL REPAIRS TO DINING HALL, SAILING INSTITUTE, HARDSTANDING, GATES OTHER MISC WORKS IN IAMPRC CELL AT PRT (EAST), TIMBER POND INSIDE PORT TRUST CHENNAI UNDER GE(I) CG CHENNAI

Amount

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil complete all as specifed and as directed.

Material and Labour for Steel formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or batter in flat with rough finished surfaces complete all as specified and as directed

Material and Labour for Steel formwork to sides of pillars, posts, struts, columns and stanchions in circular on plan for fair finished surfaces of concrete complete all as specifed and as directed

Material and labour for Plain cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for RCC M-30 (using 20 mm graded aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

Material and labour for RCC M-30 (using 20 mm graded aggregate ) as in column pillars, piers, post and struts complete all as specified and as directed

Material and labour for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required,including cranking,bending,spirally for hooping for columns ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

Material and labour for Mild steel TMT bars 5 mm dia and over upto and including 10 mm in stirrups spacers and binders , cut to length, bent to shape required,including cranking,bending,spirally for hooping for columns ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

Returning,filling in trenches including spreading,levelling ,watering and well ramming in layers not exc 25 cm thick with soil complete all as specified and as directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc but excluding ashlar facing, dressed stonework and precast concrete articles protions ordered to be dismanted including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed

Material and labour for Rendering in CM 1:6, ,15 mm thick on fair faces of brick work surfaces and mixed with WPC as per manufacuture instructions,finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separtely

Material and labour for Rendering in CM 1:4, ,10 mm thick on other than fair faces of brick work surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Dismantling of steel sheet (corrugated, semicorrugated, etc.) sheets in roof coverings including nanital or similiar patten roof covering removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed. all as specified and as directed.

Excavating in post holes each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 CM in soft/loose soil including removal of soil to a distance not exceeding 50m and making good the surface complete all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. Make:Tata Blue Scope/Jindal/Llyod

Supply and fix Rolled Mild steelsections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates confirming to Fe-410-W(Gde-E-250) quality B complete all as specified and as directed.

Supply and fix in stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all complete all as specified and as directed.

Supply and fix 2 mm thick fibre glass reinforced translucent corrugated polycorbonate sheet coloured with two corrugated side lap fixed to roof as per manufacturers instructions and fixed with L-type or J -type or cranked hook bolts complete all as specified and directed. Make:Tata Blue Scope/Jindal/Llyod

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris off the premises to a distance not exceeding 100 metres complete all as specified and as directed.

Material and labour for hardcore of guage n.exc 63mm, broken stone aggregate deposited, spread & leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) 100 mm thick in sub base floors complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate ) 50 mm thick in sub base floors and finishing with broom or MS Jalli complete all as specified and as directed.

Material and Labour for M-Sand cushioning of 25 mm thick under floors as cushioning to tiles including watering and consolidation complete all as specified and directed. Note: Punned thickness shall be measured and paid

Material and labour for Providing and laying Machine pressed rubber moulded precast concrete interlocking paver block any shape and size of 60mm thickness, M-35 Grade confirming to IS-15628-2006 complete all as specified and as directed.,

Supply and fix for Parking coloured Non-skid Ceramic tiles 10-12mm thick (Heavy duty)(square or rectangular) area of each tiles exc 0.08sqm but not exc 0.16 sqm in floor including 20mm thick screed bed in cement mortar 14 set joined in neat cement slurry and pointed in white or coloured cement to match over all as specified and as directed. Make of Vitrified ceramic tile:Johnson/Khajaria/Somany/Orient Bell Limited

M&L Granite of 20 mm thickness (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 12mm thick screed in cement mortar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, polishing and rubbing complete all as specified.

M&L Granite of 20 mm thickness (of any type) tiles machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite including cutting, polishing and rubbing complete all as specified.

Supply and fix in repair 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I ,ISI Marked including dismantling old water tank and taken as credit complete all as specified and as directed. Make :Sintex/Polycon (ISI Mark

Supply and fix in repair 20 mm bore dia Ball brass valves, high pressure, with polyethene float & fly-nut complete, screwed for GI pipe or brass ferrule complete all as specified and as specified.

Taking down old rusted steel water tubing of size 15 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed

Taking down old rusted steel water tubing of sizes 20 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed.

Supply and fix 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed .Make :SFMC/Vectus

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed .Make :SFMC/Vectus

Supply and fix in repairs vitreous china wash down water closet Single piece (size-840mmx390mmx720 mm) trap distance P-180 suite composite flushing cistern (Pedestal pattern), white colour including fixing bolts with flush pipe, including flushing cistern with connection pipe and old unserviceable wash down water closet taken as credit complete all as specified and as directed Make:- Jaquar VGS-WHT-0207P'

Supply and fix in repairs wash basin (Size 875 X 610 X 475mm) with full pedastal floor standing, white colour flat back excluding taps but including waste,plug and porcelain stopper including MS brackets etc. complete including cutting for and pinning in ends of brackets supply and waste pipe and old unserviceable wash basin taken as credit complete all as specified and as directed Make:- Jaquar FSN-WHT-0613'

Supply and fix in repairs swan neck pillar tap with capstom heads,chromium plated fancy type, with large screwed shanks and fly nuts screwed for 15mm bore pipe and old unserviceable pillar tap taken as credit complete all as specified and as directed Make : Jaquar 'KUB-35001F'

Supply and fix in repairs bib cock 15mm dia size Chorium plated fancy type screwed down,screwed for iron pipe with extended lever and wall flange and old unserviceable bib cock taken as credit complete all as specified and as directed Make : Jaquar 'FLR-5043.

Supply and fix in repairs Health Faucet, chromium plated fancy type, of 15mm bore pipe with 1.5 Metre long flexible tube & wall hook and old unserviceable health faucet taken as credit complete all as specified and as directed Make : Jaquar 'ALD-573'

Supply and fix in repairs Stainless steel Toilet Paper holder, fancy type and old unserviceable Toilet paper holder taken as credit complete all as specified and as directed Make : Jaquar 'AHS-1551'

Supply and fix in repairs Stainless steel single Towel rail 600mm long with hook fancy type and old unserviceable towel rail taken as credit complete all as specified and as directed Make : Jaquar 'AKP-35711P'

Supply and fix in repairs concealed angle cock fancy type bore of pipe 15mm chromium plated with long shank and cup and old unserviceable =angle cock taken as credit complete all as specified and all as directed. Make : Jaquar 'FON-40083K'

Supply and fix in repairs Overhead shower (Size 150x150mm) square shape single flow ( body & face plate of brass with chrome plated) with rubit cleaning system and old unserviceable over head shower taken as credit complete all as specified and as directed Make : Jaquar 'OHS-1805'

Supply and fix in repairs soap dish Polycarbide fancy type and old unserviceable soap dish taken as credit complete all as specified and as directedMake : Jaquar 'AQN-7733'

Supply and fix in repairs glass shelf 600mm long with bracket and old unserviceable glass shelf taken as credit complete all as specified and as directed Make : Jaquar 'CAN-1171N'

Supply and fix in repairs CP wall mixer with L Bend (Provision of OH shower) screwed down for iron pipe and fixed and old unserviceable CP wall mixer taken as credit complete all as specified and as directed Make Jaquar SOL-6281

Supply and fix Hand dryers of material ABS smart flow, white finish and old unserviceable Hand drier taken as credit complete all as specified and as directed. Make : Jaquar "HDR-WHT- M04A .

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 375 mm long complete all as specified and as directed.Make :Prayag/M/S Shakthi Industries

Material and labour for Cutting holes into or through brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 sq cm but not exc 400 sq cm complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) with PVC Foam profile ,homogeneous fine cellular structure having smooth outer integral skin consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC (C) channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Dismantling wall and ceiling boards (Fibre,pulp,insulation etc) or insulation boards/slabs/blankets , any thickness including cover fillets and taken as credit complete all as specified and as directed.

Supply and fix Gl frame work of grid size 605x605 mm for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all specified and as directed. Make:Armstrong/M/SGproc.

Material and labour for Seamless calcium silicate ceiling made out of 1800 x 1200 mmx12 mm thick size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specifed and all as directed.Make:Armstrong/Gyproc .Note: (Frame work for ceiling shall be measured and paid separtely )

Material and labour for Hangers 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of G I flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia ,40 mm long complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for virtified ceramic coloured tiles ,Premium quality , Light shade (shade as approved by GE) . 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany/Orient Bell Limited

Material and labour for virtified ceramic coloured tiles ,Premium quality , Light shade (shade as approved by GE) , 9 to10 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in Vertical surfaces such as dado ,skirting etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany/Orient Bell Limited

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 qm but not exc. 0.18 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany/Orient Bell Limited

Material and labour for Glazed coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile not exc. 0.18 sqm in verticals etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 ,10 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany/Orient Bell Limited

Material and labour for 2 mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st putty coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to obtain glossy surface complete all as specified and as directed. Note:Make of wall putty :Jk White cement/Birla Wall care putty

Material and labour for Preparation of old surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm and not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Supply and fix powder coated aluminium frames and grills for windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , powder coated alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 50 microns.

Supply and fix powder coated aluminium door shutters, aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , powder coated alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of anodisation 15 microns.

Supply and fix Powder coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum powder coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved powder coating aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

Supply and fix Plain sheet glass pane 4.80 mm thick ordinary quality and glazing with oil putty or beads in squares n exc 0.5 sqm in each pane complete all as specified and as directed. Note :(i) Make of Glass : Saint gobain/Modi Guard/Gold Fish

Supply and fix 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes including all fittings and fixtures as required all as specified and as directed.

Material and labour for Second class hard wood (SAL)plain, solid , hard wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directe

Material and labour for Prelaminated particle board 18/19 mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work,brick wall or concrete surface fixed for wall panelling complete all as specified and as directed.Make :Novopan/Anchor/ Kitply

Taking down carefully point wiring with copper/aluminium conductor (light,fan, socket or power complete ) and fittings such as switches,ceiling roses,pendents,regulators,sockets,light fittings,calling bell etc and removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully submain wiring with aluminum conductor cable 4/6/2.5/1.5 Sqmm in PVC conduit complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core drawn into and including non mteallic rigid PVC conduit of size 25 mm dia concealed in wall/floor etc along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling/ roof with and including PVC recangular board of adequate size for mountling switches, socket, fan regulators etc complete for the following points complete all as specified and as directed. Note: (i)Make of PVC cable : Finolex/ Polycab/Plaza.(ii) Make of PVC Conduit :Avon Plast/Presto Plast/Finolex One light point/Fan point controlled by one switch

Material and labour for Sub main wiring with two runs single core 2.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC conduit 25 mm dia in concealed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Material and labour for Sub main wiring with two runs single core 1.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 1.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC conduit 25 mm dia in concealed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC conduit 25 mm dia in concealed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Supply and fix modular Switch 6 Amps one way Flush type 240 Volts AC complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix modular Switch 16 Amps one way Flush type 240 Volts AC complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix modular socket 2/3 pin 6 Amps Flush type 240 Volts AC 2 Module complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix modular socket 2/3 pin 16 Amps Flush type 240 Volts AC 2 Module complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix modular metal box, Flush type , 3- Module complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix modular white cover plate with frame 3-Module complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and Fix Recess mounted 2' x 2' LED flat panel 34W ,4000k high efficiency with high brightness LED for glare free homogenous illumination mounted square slim and elegant downlight/panel for indoor application with high aesthetic appeal,available in various wattage for soothing light suitable for grid ceiling with super bright LED model complete with all accessories internally pre wired and connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old one and taken as credit complete all as specified and as directed. Havells Cat part No VENUSNEOHE2X2PLR18-42WLED865MOD or equivalent in Philips/Cromtpon/surya/Bajaj

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed.

Supply and fixing pole mounting junction box (looping box) IP 66/67 weather proof for street light for 3 Phase 4 wire system with internal size 200X160X98mm comprising of PVC connector and one MCB SP 6 Amps including mounting arrangement complete all as specified and as directed.

Material and labour for taking down the old unserviceable TPN/DB Vertical type by disconnecting all incoming/outgoing cables. Refixing the same by concealing in the wall including concealing the incoming/Outgoing cables and total length not exceeding 5 mtrs long and finishing the wall matching with the existing surface. Reconnect the incoming/outgoing cables all as specified and directed By Engineer-in-Charge.

YOGAA MANPOWER AGENCY

kvs constructions

SIRITEL SYSTEMS PRIVATE LIMITED

JANANIKARTHIK ENTERPRISES