PROVN OF CERTAIN SANCTIONED WORK OF AGE B/R-II (W) AGRA UNDER GE (W) AGRA

Amount

Excavation in trenches n.exc 1.5m wide and n. exc 1.5m in depth getting out in any type of soil complete all as specified and directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n. exc 0.5 cum, getting out,in any type of soil, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm and making good surface complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm.complete all as specified and directed by Engr-in-Charge.

Removing excavated material n.exc 50m and n. exc.1.5 Km the starting point incl spreading & levelling complete all as specified and directed by Engr-in-Charge..

M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in fdn filling and in sub base, levelling course concrete complete all as specified and directed by Engr-in-Charge..

M&L for coloured glazed ceramic tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick rendering in CM 1:4 as in verticle surface etc complete all as specified and directed by Engr-in-Charge..

M&L PCC 1:2:4 (20mm graded aggregate) type B-1 as in foundations, post hole, filling and coping incl necessary form work complete all as specified and directed by Engr-in-Charge..

M&L for brick work using sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 finished in any faces and even, complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick plastering in CM 1:4 on thick concrete/brick surfaces with integral water proofing compound as per manufacturer instuction finished fair complete all as spd and dr Note: Integral water proofing compound will be measured and paid separately

M&L for applying two coats of cement based paint over a coat of primer on new plaster surfaces including preparation complete all as specified and directed by Engr-in-Charge.

S & F for joist chennel, MS Pipe, angle, flat, or tee section as in post and strut including all necessary welding, drilling riveting, bolts etc. similar work conforming to Fe 290 Gde E-165. complete all as specified and directed by Engr-in-Charge..

S&F rolled section as in main and cross beams hip and angle, jack rafters, purlins, water tank stage where connected to common rafters etc incl all necessary welding, drilling riveting, bolts etc. similar work conforming to Fe 290 Gde E-165. complete all as specified and directed by Engr-in-Charge.

M & L for two coat of synthetic enamel paint on new steel surfaces over one coat of red oxide primer including preparation of surfaces complete all as specified and directed by Engr-in-Charge..

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, washer as specified and directed by Engr in Charge.

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in soft soil complete all as specified and directed by Engr-in-Charge..

Removing excavated soils exc 250 M but n exc 500 M and depositing where complete all as specified and directed by Engr-in-Charge..

M&L PCC 75 mm thick (1:4:8) type D-2 using 40 mm graded aggregate sub base of chequered tiles etc complete all as specified and directed by Engr-in-Charge..

M&L Machine cut kota stone 18-20mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and mirror polishing over 20mm thick screed bed in CM (1:6) as in floor complete all as specified and directed by Engr-in-Charge..

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below or above the gd level, removing rubbish off the premises complete all as specified and directed by Engr-in-Charge..

M & L for chequered cement concrete colour tiles 30cm x 30cm x 25mm thick, set, jointed with white cement & pigments and pointed in neat cement slurry including screed bed or bedding layer of mortar 20 mm thick in CM (1:6) for laying in floors complete all as specified and directed by Engr-in-Charge..

M & L for TMT 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beam and Fdn, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified and directed by Engr-in-Charge.

M & L for flat Rough finished formwork to plinth/ lintel beam, soffits, roof beams, lintels, cantilevers, RCC shelves, similar work etc. including supports complete all as specified and directed by Engr-in-Charge..

M & L for RCC (mix with mixture machine) Type B1 1:2:4 (20mm graded stone aggregate) in plinth Beams, chajja,lintel/roof beam, similar work etc complete all as specified and directed by Engr-in-Charge..

M & L for 20 mm thick granite (of any type/colour) work (table rubbed and polished) in WHB basin slab, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

S & F vitreous china, Ovel type counter top wash hand basin approx size 560 x 400 mm white fixed on granite slab, incuding waste pipe, grating etc complete all as specified and directed by Engr-in-Charge.

S & F for 15 mm bore, fancy type, CP Swan neck pillar taps and fly-nuts ,complete all as specified and directed by Engr-in-Charge.

S & F 15 mm chromium plated Bib taps fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe) complete all as specified and directed by Engr-in-Charge..

S & F 15 mm chromium plated Stop valves, fancy type (angle valve) cast copper alloy screwed down high pressure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed (15mm bore dia of pipe ) complete all as specified and directed by Engr-in-Charge..

S & F PVC connections 15 mm dia with PTMT nuts of length 750 cm complete all as specified and directed by Engr-in-Charge..

S & F rotational moulded polyethylene three layer water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part I capacity of water tank 1000 litres complete all as specified and directed by Engr-in-Charge.. .

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule for 20mm bore dia of pipe complete all as specified and directed by Engr-in-Charge..

S&F 15mm dia tubes medium grade galvanised, with all fittings and fixed complete, laid in floors/ wall complete all as specified and directed by Engr-in-Charge..

S&F 20mm dia tubes medium grade galvanised, with all fitting and fixed complete, laid in floors/wall complete all as specified and directed by Engr-in-Charge...

S & F 75 mm bore dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge...

S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed by Engr-in-Charge..

S & F grating doom 100/125 mm dia with waste hole/without waste hole of PTMT/ CP. (Minimum weight 40gms) complete all as specified and directed by Engr-in-Charge.

S & F 20 mm chromium plated Stop valves, fancy type cast copper alloy screwed down high pressure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed (20mm bore dia of pipe ) complete all as specified and directed by Engr-in-Charge.

Excavating over areas, n exc 1.5 M deep and getting out in any type of soil complete all as specified and directed by Engr-in-Charge...

M & L for formwork to faces of walls,retaining walls, abutments,parapets and staircase railings, water cherry and similar work including attached pillasters, buttresses, etc. vertical face of RCC wall complete all as specified and directed by Engr-in-Charge.

M & L for RCC (mix with mixture machine) Type B1 1:2:4 (20mm graded stone aggregate) Walls, retaining walls, basement walls, ballast walls, water cherry and the like any thickness above top of footings including attached pilaster and buttresses complete all as specified and directed by Engr-in-Charge..

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork built in cement mortar including all quoins arches pillar etc complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below or above the ground level, removing rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-Charge.

M & L for brushing neat cement slurry with 3.0 Kg of cemenr per Sqm complete all as specified and directed by Engr-in-Charge

M & L for 25mm thick cement concrete type B1, 1:2:4 (using 20 mm graded aggregate) as in flooring complete all as specified and directed by Engr-in-Charge.

M&L Machine cut kota stone 18-20 mm thick as in riser of step, skirting,dado and pillar etc. laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing laid over and including 10mm thick rendering CM (1:4) complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick rendering on fair faces of brick surfaces finished even and smooth without using extra cement in cm 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for applying three coats of white wash on wall including preparation of new plastered or un-plastered surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for broken stone boulders hardcore of guage n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface for levelling and slop maintaining complete all as specified and directed by Engr-in-Charge.

M & L for 100 mm PCC type D-2 1:4:8 (using 40 mm graded granite stone aggregate) as in sub base, levelling course of flooring complete all as specified and directed by Engr-in-Charge.

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding to edges etc, including 20mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and rounding to edges etc, including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, alusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing holdpast and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Supply only integral water proofing compound liquid admixture for cement mortar complete all as specified and directed by Engr-in-Charge.

M & L for Form work to sides and soffits of floor or roof beams, beam haunching girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc in Lintel & roof beam complete all as specified and directed by Engr-in-Charge

M&L Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed by Engr-in-Charge

M&L Preparing newly plastered or un plastered surfaces of wall and applying two coats of oil bound distemper with roller application over a coat of primer over a coat of average 1mm thick wall care putty on new plastered surfaces complete all as specified and directed by Engr-in-Charge.

M&L for Moorum/red bajri filling in floors are paning laid in layer n exc 15cm thick, spread levelled and rammed including watering complete all as specified and directed by Engr-in-Charge

M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75 mm thick as in sub base of floor/path/paving and plinth propetection finished even and fair without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for Pressed steel frame size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge.

S & F 35 mm thick flush shutters, board solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed by Engr-in-Charge

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.

S&F Floor door stopper 150 mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge

S & F Steel windows with side hung shutters including projecting type hinge with hold fast, steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S & F Steel windows with side hung shutters including projecting type hinge with hold fast, steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge

S & F Steel ventilators with top hung shutters including hinge with hold fast, steel handle and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with staples complete all as specified and directed by Engr-in-Charge

S&F for framed work such as grills, grating etc. with ends of bars shouldered and/or riveted or forged into spike, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tank and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W(GdeE-250) quality B complete all as specified and directed by Engr-in-Charge

S&F pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Surface dressing nexc 15cm deep getting out soft/loose soil complete all as specified and directed by Engr-in-Charge

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from demolition of brick shall be reused after cleaning.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge

M & L for Preparing old plastered or un plastered surfaces of wall and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge

Demolition of cement concrete (unreinforced) in any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or R.C.C any section including taking out embedded portion in concrete etc complete all as specified and directed by Engr-in-Charge

S&F in repair for Galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts, including securing or tying at crossings with and provision of galvanised mild steel pins, etc. as directed. Note : Each line wire to be measured) complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height (not exc 20 M) complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering in CM 1:6 on concrete, brick/stone surfaces of wall finished even and smooth without using extra cement, for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height (not exc 20 M) complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 mixed with liquid WPC @ 200 ml/50Kg of cement or as per manufactures's instructions, finished fair and even, for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height (not exc 20 M) complete all as specified & directed. Note:- WPC shall be measured and paid separately as supply only.

M&L for applying two coats of white/colour washing on new plaster surfaces including preparation, for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height (not exc 20 M) complete all as specified and directed by Engr-in-Charge

M&L for applying two coats of cement based paint over a coat of primer on new plaster surfaces including preparation, for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height (not exc 20 M) complete all as specified and directed by Engr-in-Charge.

S & F Welded steel wire fabric n exc 4Kg complete to brick/concrete wk or steel members for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height (not exc 20 M) complete all as specified and directed by Engr-in-Charge.

S & F framed work such as grills, gratings and similar work incl welding conforming to Fe.290.Gde-E-165 for birds proof work including all scaffolding, ladders, trestles, plant, templets and protective measures etc required in the execution of work in any height (not exc 20 M) complete all as specified and directed by Engr-in-Charge

M&L PCC 75 mm thick (1:4:8) type D-2 using 40 mm graded aggregate sub base, interlocking paver block etc complete all as specified and directed by Engr-in-Charge.

M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

M&L for filling 25 mm thick (Avg) sand cushion layer for laying interlocking pavers complete all as specified and directed by Engr-in-Charge.

M&L for Plain cement concrete 1:5:10 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete, surface channel, drain etc complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6, type C1 ( using 20 mm graded stone aggregate ) as in leveling course, coping, benching , surface channel, drain etc complete all as specified and directed by Engr-in-Charge.

S&F Reinforced concrete pipe, bore of pipe 300mm , class NP3, laid and jointed complete with collers complete all as specified and directed by Engr-in-Charge.

Ditto as above item No 100 but bore of pipe 150 mm complete all as specified and directed by Engr-in-Charge

M&L in Concrete bed to drain pipes ( bore of pipes is 300 mm) including packing under and completely surrounding pipes with concrete after they are laid and tested in complete all as specified and directed by Engr-in-Charge.

ditto as above but bore of pipe 150 mm

S& F in repair 110 mm dia pvc (SWR ) pipes single socket in any length laid in trenche , drain wall or in floors complete all as specified and directed by Engr-in-Charge

M&L Providing precast cement concret ( 1:2:4 type B 1 using 20 mm graded aggregate) set in cement mortar 1:6 as in drain cover slab including placing in position , chamfres, weathring, throating etc complete all as specified and directed by Engr-in-Charge ( Note : - reinforcement shall be measure and paid separtely under respective item of sch A.

M/S DEVENDRA KUMAR GUPTA (BID ID -3141050)

ASHISH SHARMA (BID ID -3141209)

Afghani Constructions (BID ID -3140647)

M/S Chadha Brothers (BID ID -3141453)