WB-HMC/NIT/ED-033/L/2025-26

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. 2 Way.Ref : PWD/Elec. Works/2017/Page -D-09/I-11

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. Flat iron frame. 250A. Make: Standard or equivalent. Ref : PWD/Elec. Works/2017/Page -D-11/I-14

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – (As per Drawing no. 470 of PWD Specification Book – May 1991). 4 bars. 415 V, 315 A. 4 x 50x10mm; 500x150mm. Ref : PWD/Elec. Works/2017/Page -D-11/I-14

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 8 way Enclosure (LTTD08N). Make: L&T or equivalent. Ref : PWD/Elec. Works/2017/Page -D-11/I-14

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+6 way Enclosure (LTSD08N). Make: L&T or equivalent. Ref : PWD/Elec. Works/2017/Page -D-10/I-13.

(i) Supplying and fixing 240/415 V FP 100 A MCB isolator on din rail of existing DBs and necessary connection. Make: L&T or ABB or equivalent. Ref: PWD /Elec. Works/ 2017/P-D5,D6/I-6,I-7.

(ii) Supplying and fixing 240/415 V DP 40 A MCB isolator on din rail of existing DBs and necessary connection. Make: L&T or ABB or equivalent. Ref: PWD /Elec. Works/ 2017/P-D5,D6/I-6,I-7.

(iii) Supplying and fixing 240/415 V DP 32 A MCB isolator on din rail of existing DBs and necessary connection. Make: L&T or ABB or equivalent. Ref: PWD /Elec. Works/ 2017/P-D5,D6/I-6,I-7.

(iv) Supplying and fixing 240/415 V,6-32 A SP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. Make: L&T or ABB or equivalent. Ref: PWD /Elec. Works/ 2017/P-D5,D6/I-6,I-7.

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface]. Light Point - 388 Fan Point- 325 Exhaust Fan Point- 12 Plug Point-328. (Average run 6 Mtr.) Ref : PWD/Elec.Works/2017/Page -E21/ I -1(b)

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm). Ref : PWD/Elec.Works/2017Page -E11/I- D.1(b)&(c).

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) Ref : PWD/Elec.Works/2017Page -E11/I- D.1(b)&(c).

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 6 Module. Ref : PWD/Elec.Works/2017Page -E11/I- D.1(b)&(c).

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 8 Module. Ref : PWD/Elec.Works/2017Page -E11/I- D.1(b)&(c).

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 12 Module. Ref : PWD/Elec.Works/2017Page -E11/I- D.1(b)&(c).

Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. 2 Module. Ref : PWD/Elec.Works/2017/Page -E-17/ I -2(a).

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover. Ref : PWD/Elec.Works/2017/Page -E-17/I -3(a)&(b).

Supply & Fixing 240 V 16 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required Ref : PWD/Elec.Works/2017/Page -E-17/I -3(a)&(b).

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. Ref : PWD/Elec.Works/2017/Page -E-17 I -4(a) )&(b).

Supply & Fixing 240 V, 16A, 3 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. Ref : PWD/Elec.Works/2017/Page -E-17 I -4(a) )&(b).

Supply and fixing of Phillips Smartbrite Xtra 4ft run length LED Batten Tube Light, incl Fixing only fluorescent light fitting suspended 25 cm below the ceiling with 2 no. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5 sq.mm.) flexible copper wire of 1.10 mt. length. Type- 20 Watt LED. Make: Havells or equivalent. Ref: Unified Schedule Of Rates (M&E),May'2022, Irrigation & Waterways Department/P-111/I-5.3-F.4.0.5

Supply and delivery of Ceilling fan 48” Sweep. Make: Crompton Greaves. Ref: UDMA/Elec.-Mech.works/2018/P-23/I-70(a)&71(a).

(i) S & F M.S. Fan clamps of 2 piece type of RC ceiling as per approved specification fabricated from 40mm x 9mm (11/2'' x 3/8'') M.S. flat incl.making good damages to building roof with satisfactory finishing and painting. Ref : PWD/Elec. Works/2017/Page - D14/ I - 29.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. Ref : PWD/Elec. Works/2017/Page- E18/ I-10.

Supply and delivery of 230V,50Hz Heavy duty Metal 9"exhuast fan. Make: Crompton Greaves. Ref: UDMA/Elec.-Mech.works/2018/P-14/I-6.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: Type: 23 cm (9"). Ref : PWD/Elec. Works/2017/Page- C4/ I-28(a).

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/): Cable size (4 c x 25 sqmm). Ref: UDMA/Elec.-Mech.works/2018/P-11/I-1(f)

Laying of cable on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. asnecy., mending good damages and painting. Cable size (4 c x 25 sqmm). Ref: PWD/ Elec.works/ 2017/P-F1/I-2(b)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cable. Cable size (4 c x 25 sqmm). Ref: PWD/ Elec.works/ 2017/P-F4/I-7(c)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. Cable size (4 c x 25 sqmm). Ref: PWD/ Elec. works/ 2017/P-F5/I-8(b)

Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/): Cable size (2 c x 10 sqmm). Ref: UDMA/Elec.-Mech.works/2018/P-11/I-1(c/1)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. Cable size (2 c x 10 sqmm). Ref: PWD/ Elec.works/ 2017/P-F1/I-2(a)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cable. Cable size (2 c x 10 sqmm). Ref: PWD/ Elec.works/ 2017/P-F4/I-7(a)

Supply and fixing of Havells Post top Luminaries model no: CORAL PT35WLED (35Watt) over the preinstalled GI Pipe over the gate structure or similar structure incl. connection by 1.5 sq mm cu wire from loop box to the light. Ref: Vetted Rate of KMDA

Supply of 65 mm GI pipe (ISI-Medium). Ref : PWD/Elec. Works/2017/Page- K-3/ I-126.

Supply & Fixing of GI Earth Spike (1833 x 20 mm). Ref: WBSEDCL Rate (Vetted by MAD)

Providing CC (6:3:1) muffing 0.3 mtr dia upto the height of 0.3 mtr. above the ground level around the pole base complete with 3 mm thick neatly finished cement plaster all-round after dismantling the unserviceable muffing if necessary. Ref : PWD/Elec. Works/2017/Page- I-1/ I-11.

Supplying & Delivery of LED Flood Light with pressure die cast aluminium housing,IP66 Protection,road way luminarie with high power LED. Type: 100 Watt LED or equivalent. Make & Model: Crompton (Model no - CFS-504-100-30-60D-SL-GL-NSG) or Any reputed make having same technical specification. Ref: Vetted Rate of KMDA.

Add GST 18%

Add LWC 1%