PROVN OF WEATHER SHED AT TYRE BAY OF STN MT SECTION , CONSTRUCTION OF PATHWAY AND PROVN OF ELECTRIC AND WATER SUPPLY FOR THREE WATCH TOWERS AND PROVN OF CERTAIN MINOR AND REVENUE WORKS AT AF STN AGRA UNDER GE (AF) TECH AREA AGRA

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth for foundation, laying of cable, errection of pole, stays and pipe line etc.n. exc 10sqm on plan and getting out in soft/loose soil. complete all as specified and directed.

Surface excavation n exc 30 cm deep and avaraging 30 cm deep and getting out in soft and loose soil complete all as specified and directed.

M&LCement concrete in foundations, filling and mass-concrete with 1:3:6 type C-2 (using 40 mm graded stone aggregate) etc complete all as specified and directed.

M&L RCC M-25 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete. complete all as specified and directed.

M&L RCC M-25 in Columns, pillars, piers, posts and struts etc; complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed.

M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, and binding including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed.

Use & waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surface . complete all as specified and directed.

Use & waste of formwork to sides of pillars, posts, struts, piers, columns, and stanchions and similar work; for fair finished surface . complete all as specified and directed.

M&L hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate in flooring complete all as specified and as directed.

M & L for 50mm thick sand cushioning laid dry to the profile under interlocking block complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N / Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with Grey cement and pigment complete all as specified and as directed.

M&L cement concrete 1:3:6 Type C-1 (using 20mm graded stone aggregate) in kerb stone ,copings, apex stones, , anchorage blocks, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. complete all as specified and as directed.

M&L 150 mm thick Cement concrete, 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base of paving complete all as specified and directed.

M&L 150 mm thick Cement concrete, M-25 design mix as in paving / hard standing complete all as specified and directed.

Finishing surface to concrete roads, pavements, by brooming complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material exc. 1.5 km but nexc 5 km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Removing demolished/excavated material of concrete exc. 1.5 km but n exc. 5 km complete all as specified and directed.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

Preparing surface of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.

M&L for preparation of newly steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre-painting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strenght of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified.

S&F MS bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wind ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F 1.25 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

S & F 160mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC SWR bends any radius of size 160 mm bore complete all as specified and directed.

S&F Mild steel screw bolts (machine made) 20mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm length but nexc 10 cm length complete all as specified and directed

S&F Mild steel screw bolts (machine made) 10 mm dia with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces on fair faces of brick work or concrete surfaces in CM 1:4 and finished the surface even & smooth with out using extra cement including taking down old existing plaster of any description complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall and applying two coat of white wash complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of aluminium paint over a coat of aluminium red oxide primer complete all as specified and directed.

S&F GI powder quoted snap grid fram work of size (605mmx605mm) with main runner (32x24.65)mm, cross tee (27x24x2.5)mm and moulding (19x19)mm for false seiling indcluding necessary fixing arangement with roof complete all as specifed and directed.

M&L 4 mm thick non AC fibre cement building board of size 600mmx600mm fixed, laid/inserted to GI poweder coated snap grid/framework complete all as specified and directed.

Taking down carefully Aluminium/copper/Flamp proof point wiring (Light/ Fan/Socket or power) complete including fitting fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting etc and making good disturbed surface of wall/ceiling etc., all as specified and directed.

Taking down main switch/MCB DB/AC enclosure/Three phase enclosure by disconnecting the electric supply all as directed at site.

Supply & laying of best bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and as directed.

M&L for sand coushioning with clean dry fine sand unwashed including gently punning around cable in trenches for cable protection complete and filling the sand in cable duct inside the sub station building complete all as specified and as directed. Note:- Punned thickness of sand shall be measured and paid for sand used in cushioning to cable.

M&L for drilling suitable dia horizontal bore holes for insertion / laying of 50/100 mm bore GI tubing of any description below/under road surface/floors etc with using mechanical or manual devices as required at site including making good disturbed surface to match with the existing strata after laying pipes complete all as specified and as directed.

Supply and fixing of GI tubing 'light grade' of 50 mm bore for cable protection on pole/wall/floor/or in trenches and drain etc complete with necessary clamp, nut, bolts and washers and socket complete all as specified and directed.

Supply, laying, testing of cable XLPE insulated, screened, PVC bedded,galvanised steel strip or wire , armoured heavy duty electric under ground LT cable 1100 volts grade with stranded aluminium conductor of size as under.

16 sqmm 4 core

25 sqmm 4 core

S&F compact bus bar chamber with copper bus bar 4 Nos of capicity 125 Amps including 63 Amp MCCB,4pole as incoming, with breaking capacity of 25 KA and IP 54 protection complete all as specified and directed

M&L for point wiring complete with multi stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories as under.

One light/fan/exhaust fan point controlled by one way 5 Amp switch. complete all as specified and directed.

One 3 pin/5 pin socket out let 5 Amp on independent board complete all as specified and directed.

All as per srl item no. 50 above but for 3/5 pin socket outlet for 15 Amps on independent board with 2.5 sqmm PVC insulated, unsheathed single core multistranded copper conductor cable 1100 volts grade including 2.50 sqmm PVC insulated unsheathed multi-stranded copper conductor cable as earth continuity conductor complete all as specified & directed.

M&L for point wiring for hanger light/ security light complete with stranded copper conductor 2.5 sqmm size (Nominal area) PVC insulated unsheathed cable FRLS in and including surface PVC conduit ISI marked not less than 20mm dia with including 2.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk /terminal boxes and each fitting/ fixture, complete with all accessories all as specified and directed :- Note : (i) Average length of point wiring for Hanger lights is approximately 30 RM

S&F piano switch 1 way 6A complete all as specified and directed.

S&F Socket, 6A - 2/3 pin complete all as specified and directed.

S&/F piano switch flush type, single pole one way 15/16 Amps, 240 volts complete all as specified and directed.

S&F stepped type Electronic fan regulator flush type complete all as specified and directed.

S&/F Socket oulet 2 in 1, 3 pin 5 Amps and 3 pin 15 Amps, flush universal type complete all as specified and directed.

S&F ceiling rose surface bakelite ISI Marked three terminal. complete all as specified and directed.

S&F round highbay in PDC housing LED light having high luminaire efficacy 150Lm/W IP 66, bright energy saving,environment friendly & robust open type verticle Highway 120 watt LED complete fitting complete all as specified and directed.

S&F, LED flood light fitting suitable fixing on hanger including all fixing arrangement high grade aluminium pressure die cast and toughened glass high spread using high quality lenses and reflector including over voltage protection up to 300 volts complete of 80 watt having high luminaire efficacy 110Lm/W IP 66 complete all as specified and directed.

S&F surface/wall mounting LED batten,extruded aluminium housing provided for efficient heat dissipatin with poly carbonate diffuser & intergrated electronoc driver including 20 watt LED complete fitting as specified and directed.

S&F LED security light 80 W, IP 66 including all accessories of Make Crompton Model No LFL-80-CDL/60 or equivalent in Bajaj & Havells complete all as specified and directed

Supply & fix fans ceiling complete with all accessories 230 V,1200 mm sweep. BEE 5 star rated including connection from ceiling rose to fan connecter with three core wire of suitable size complete all as specified and directed.

S&F stout plus LED complete fitting including 1x10watt LED tube suitable for mirror light Complete all as specified and directed.

S & F MCB TPN 40 Amp ,415 Volts 'C' series 10 KA complete all as specified and as directed.

M&L for earthing complete with galvanised steel plate electrode 600mmx600mmx6 mm thick buried directly in ground (earth pit not less than 4.00 Mtr deep below ground level with top edge of the plate not less than 3.25 Mtrs below ground level connected to GI wire 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl excavation and earth work and disposal of surplus soil incl 20 mm GI tubing light grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt, PCC (1:2:4) type C-1 using 20mm graded stone aggregate earth pit with 40x40x6mm MS angle iron frame, RCC cover 40mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bar @ 75mm C/C both ways with MS handle 12mm dia, plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally, PGI funnel with 20mm dia GI pipe for watering and wire mesh complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test incl testing complete all as specified and diected. Note : Cost of GI wire and protection pipe upto 7.5M shall deemed to be included in quoted rate

M&L for sub main wiring drawing in and including PVC conduit not less than 20mm dia medium grade with PVC cable 6 Sqmm nominal area 2 single core PVC insulated unsheathed cable with stranded copper conductor including 6 Sqmm size PVC cable stranded copper conducter as earth continuity wire and connected to earth dolly. complete all as specified and directed.

M&L for MCB DB of sheet metal enclosure double door type, single pole and neutral 8 way with 200 Amp rated bus bar 240V and grouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate. complete all as specified and directed.

S & F MCB SP 6 to 32 Amps, 240V 'C' Series 10 KA. complete all as specified and directed.

S & F MCB DP upto 63 Amp 240 Volts 'C' series 10 KA. complete all as specified and directed.

Supply, laying and testing GI tubing medium grade including required GI fitting complete all as specified and directed for the following bore :-

40 mm bore

25 mm bore

S&F gun metal globe gate valve with iron wheel head, screwed both ends ISI mark for the following sizes all as specified and directed :-

40 mm bore

25 mm bore

Supply, lowering, commissioning & testing submersible pumping set with discharge capacity 80 LPM at 50M head single phase 230 volt AC electric driven 2900 rpm of minimum 1.5 HP complete all as specified and directed .

Supply & laying PVC insulated and PVC sheathed copper conductor cable 2.5 Sqmm, 3 core flat for 1100 volts AC including connecting with submersible motor to starter panel complete all as specified and direced.

Supply and fixing wall mounted cubical type panel board with locking arrangement, suitable for comprising of starter, condenser, volt meter, indicator lamp, Amp meter, MCB/cut out of suitable capacity for 1.5 HP single phase submersible pumping set including fixing arrangement complete all as specified and directed. .

M & L for 2 Nos MS clamp made out of 40mmx 6 mm thick FI for holding of 40 mm dia column pipe complete with suitable size 02 Nos nut, bolt & washers complet all as specified and directed

M& L for well cap made out of 4 mm thick MS plate including making provision for passing GI column pipe of 40 mm dia complete all as specified and directed .

M&L for boring/drilling in any type of strata upto 100 mtr of 125 mm dia by any means including developing bore,flushing up to coming of clean water etc all as specified and directed.

Supply & lowering PVC pipe 110 mm dia ISI mark 6 Kgf/cm² pressure plain/slotted as per site requirement complete all as specified and directed.

Supply,lowering and testing in bore welll 32 mm dia high density polythylene column pipe pipe ISI marked as per IS 49840 of 1995 metrial grade PE-63, pressure rating PN-10 and 32 mm dia , jointing material with HDPE fitting complete all as specified and directed.

Supply, Install, testing and commissioning diesel engine driven pump set of capacity 5/6 HP 1500 RPM with 10 mtr head at discharge capacity 17.7 ltr/sec and suction/discharge pipe size 80 mm dia with self priming action, dynamically balanced rotating parts to ensure minimum vibration during running with non clogging impeller to handle suspended particles/solids, the pump shall be coupled with diesel engine of capacity 5 HP, 662 CC, vertical air cooled, single cylinder, totally enclosed compression ignition four cycle diesel engine hand start alongwith suitable size of base plate and all connected items/accessories etc. complete all as aspecified and directed. Make- Kirloskar model no-SP3L with connecetd pump mode no SPEC3L or equivalent.

M&L for trolley for 5 HP diesel engine driven pump set factory fabricated manufactred of MS channels/angle iron etc duly painted and reccommended by manufacturer with four wheel and one spare wheel of suitable size including all wheel tyre and tube inner with hydraulic jack, toe rod, four wheel system, spring loaded leaf spring based suspension system with provn of idling screw jack 04 Nos for leveling of above diesel pump etc complete all as specified and directed.

Supply and fix Heavy duty water tube of inner diameter 80 mm suitable for water irrigation of black EPDM reinforced of high tensile textile cords of minimum pressure capacity 18 bar (270 psi) of black EPDM - abrasion and ozone resistant cover for use of heavy duty water discharge specially designed for high pressure irrigation systems of working temperature: -30 °C +80 °C all as specified and directed.

S&F Branch pipe gun metal 63mm instantaneous inlet, made threaded outlet, 15mm bore nozzle short complete all as specified and directed.

Supply and fix 63 mm dia 30 meter long hose conforming to IS 636 complete with male and female coupling conforming to IS 903 complete all as specified and directed.

Supply and fix MS flanged pipe 100mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed.

Supply and fix MS flanged pipe 150mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer complete all as specified and directed.

Supply and fix 100mm bore hand operated butterfly valve of pressure not less than 15 Kg / Sqcm with complete set complete all as specified and directed.

Supply and fix 150mm bore hand operated butterfly valve of pressure not less than 15 Kg / Sqcm with complete set complete all as specified and directed.

M&L for pressure guage complete with all fttings and accessories etc all as specified and directed.

Material and labour for taking down split AC care fully from MSA crew room no -1 including all accesaries installation/fixing to new location of split air conditioner units indoor/outdoor complete on wall capacity 1.5TR/2.0 TR as directed location including all fixing arrangement i.e. Angle stand, copper pipe, 4.0 sqmm 3 core copper flexible cable for connection to indoor & outdoor in minimum length approx 15 mtrs for each unit and including supply and fixing of copper pipes, flares fitting fixtures as well as required length & size and qty and including charging with R-22 and other refrigerant upto sufficient quantity complete all as specified and directed.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including PVC casing & caping or PVC conduit ISI marked not less than 32mm width with its accessories or drawn in and including PVC rigid conduit not less than 25mm dia with its accessories, surface type, including one run of single core FR PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm as earth continuity and connected of common earth dolly complete all as specified & directed. Note:- Two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC casing & caping or PVC conduit including its accessories shall be measured and paid one unit length.

Supply and fixing sheet metal enclosure single pole and neutral with a two pin & earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and direceted.

M&L for point wiring concealed type with 4.0sqmm PVC insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 4.0sqmm PVC insulated unsheathed multistranded copper conductor cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box, painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated sheet cover for fixing switches/ socket/regulators etc & making good the disturbed surfaces as per existing for one independent light/ socket outlet point controlled by one no switch, SP, one way, 15 amps complete all as specified & directed.

Supply and fixed , MCB SPN 40 to 63 Amp 240V, 'C' series 10 kA, complete all as specified and directed.

M&L for factory made sheet metal enclosure 240 volts, 4 ways with 200A rated bus bar, SPN, double door type suitable for housing MCB/Isolators and fixed the same on & including mild steel hold fasts of suitable size & shape after grouting the hold fasts in the wall with and including PCC (1:2:4) type B1 using 20mm graded stone aggregate complete all as specified & directed.

Sethi Brothers

deva engineers

Rakesh kumar