Day to Day Maintenance of Lok Nirman Bhawan Complex, Panama Chowk, Jammu during the financial year 2020-21

Amount

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix).

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead in cement mortar as per direction of Engineer-in-charge.

Removing mortar from bricks and cleaning bricks including stackingwithin a lead of 50 m. (stacks of cleaned bricks shall be measured). From brick work in cement mortar.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area of 3 sqm. and below.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area beyond 3 sqm.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area of 3 sqm. and below.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead of area of beyonf 3 sqm.

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.

Demolishing mud phaska in terracing and disposal of material within 50 meters lead.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand).

Renewing glass panes, with putty and nails wherever necessary including raking out old putty. Float glass panes of thickness 4.0 mm(weight not less than 10kg/sqm).

Renewing glass panes, with putty and nails wherever necessary including raking out old putty Float glass panes of thickness 5.0 mm(weight not less than 12.5 kg/sqm).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement : 4 coarse sand).

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level.

Extra for brick work in square or rectangular pillars.

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in cement mortar 1:4 ( 1 cement : 4 coarse sand).

Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete.

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundations, footings, bases for columns.

Suspended floors, roofs, landings, balconies and access platforms.

Shelves (cast-in-situ).

Edges of slabs and breaks in floors and walls under 20 cm wide.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars.

Steel work welded in built up sections/framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead.

Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead.

White washing with lime to give an even shade. Old work (two or more coats).

White washing with lime to give an even shade. Old work (one or more coats).

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 (1 cement : 6 coarse sand).

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 (1 cement : 4 fine sand).

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm).

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm).

Finishing walls with water proofing cement paint of required shade. Old work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Ply wood 7 ply, 9mm thick Decorative ply wood one side decorative veneer and commercial veneer on other face (Type -I) conforming to IS 1328 BWR type.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall.

15 mm dia. nominal bore (Medium).

20 mm dia. nominal bore (Medium).

25 mm dia. nominal bore (Medium).

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work).

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Bend 87.5°.

75 mm bend.

75mm dia door bend.

75mm dia Cowl.

110 mm bend.

110mm door bend.

110mm dia door tee.

110mm dia Tee junction.

Reducer Tee 110mm dia to 75mm dia.

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.Bend 87.5°.

110mm dia Cowl.

75mm dia door Tee.

150mm dia Plain Bend.

150mm dia Door Bend.

Providing and fixing PVC floor trap of Supreme.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : White Vitreous China Flat back wash basin size 630x450 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. One urinal basin with 5 liter white P.V.C automatic flushing cistern.

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 liter capacity -White.

Providing and fixing PVC conenction for flushing cistern, wash basin, sinks etc. (complete job).

450mm long.

600mm long.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required.

610x460mm bowl depth 200mm

470x420mm bowl depth 178mm

Providing and fixing cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement: 2 coarse sand) including making the necessary chases in stone and holes in walls wherever required Gunmetal Cramps 25 x 6 mm - 30 cm long.

Providing and fixing PVC fittings (Paryag make).

Pillar cock.

Short nose bib cock.

Long nose bib cock.

Angle cock / valve.

Providing and fixing C.P fitting (Jaquar, Essco/Marc/Cera make).

Pillar cock.

Short nose bib cock.

Long nose bib cock.

Angle valve.

Mixer for wash basin.

Swan Neck left / right tap.

Providing and fixing sanitary fittings complete.

C.P Jet with Rod complete.

C.P Gratings 4".

C.P Gratings 6".

C.P Extension Nipple 1".

C.P Extension Nipple 2".

Soap dish.

C.P Towel Rod 2'-0" (20mm dia).

C.P Towel Rod 1'-6" (20mm dia).

Towel Ring 200 mm dia.

Providing and fixing sanitary fittings complete.

Wate coupling for wash basin 32mm dia.

Wate coupling for Laboratory sink 50mm dia.

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item) with floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm).

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin-plate etc. complete as per the direction of Engineer-in-charge. With Stainless Steel cover plate minimum 1.25 mm thickness.

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: - Butt hinges and necessary screws shall be paid separately). Rate for thickness of shutter in mm per sqm 30 mm.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: - Butt hinges and necessary screws shall be paid separately). Rate for thickness of shutter in mm per sqm 35 mm.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. Second class deodar wood 35mm thick / Sqm.

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete. 2nd class teak wood.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete.

12mm dia.

20mm dia.

Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

40mm thick with 20 mm nominal size stone aggregate.

50 mm thick with 20mm nominal size stone aggregate.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600x600 mm.

Providing and fixing M.S Wire gauze to old wood shutters/steel shutters including removing and fitting of shutters (complete Job).

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.

Fixed to steel windows by welding

Fixed to openings / wooden frames with rawl plugs screws etc.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). Second class deodar wood.

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm with 2nd class teak wood beading 62x19 mm.

Providing and fixing Prelaminated 12mm thick ply wood greenply ECOTECH - 710 grade for partitions of approved make and brand (complete job).

Providing and fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type-A (1mm thick).

Providing and fixing 12mm thick frameless toughened glass door shutters of approved brand and manufacture, including providing and fixing top and bottom pivot and double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings all complete as per direction of engineer-in-charge.

Supply of labour for repair works.

Black smith Ist class.

Carpenter Ist Class.

Carpenter 2nd Class.

Mason Ist Class.

Mason 2nd Class.

Welder.

Aluminium Fitter.

Mazdoor.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 Mtrs lead thickness above 10mm upto 25mm.

Providing and fixing in wall lining of 12mm thick wood plastic composite board including frames, backing or studding of 18mm WPC board of 6" wide back side @ 600mm cement concrete with necessary fixing arrangement and screws etc. complete.

Providing and fixing charcol PVC Decolite for plain lining / cladding with necessary adhesive all job complete.

Providing and fixing wall paper with necessary adhesive all job complete.

Providing and fixing PVC fancy moulding with necessary adhesive all job complete.

Providing and fixing T-section with necessary adhesive (steel) all job complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubulaqr sections / appropriate Z-sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e at top bottom and sides with required EPDM rubber i neoprene gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P brass I stainless steel screws, all complete as per architectural drawings and as per directions of Engineer-in-charge (14 Gauge).

Providing and fixing Zebra Blinds all job complete.

Providing and fixing false ceiling at the height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanised with zinc coating of 120 grams / sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm at 1200 mm centre to centre, one flangefixed to the ceiling with dash fastner 12.5mm dia x 40mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required lenght with nuts and bolts of required size and other end of angle hanger fixed with G.I channels 45x15x0.9mm running at the apacing of 1200 centre to centre, to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clips made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450mm centre to centre, with 25mm long drive-all screws of size @ 230mm interval, including fixinf of gypsum board to ceiling section and perimete channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufactures specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimater channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-charge but excluding the cost of painting with 12.5mm thick tapered edge gypsum plain board conforming.

Providing nad fixing wooden skirting including base of particle board of 12mm thickness with becessary fixing arrangement and screws etc. (Complete job).

Providing nad fixing wooden flooring including preparation of base and fixing the same with necessary fixing arrangement and screws etc. (Complete job).

Providing and fixing sanitary items (Complete job).

European W/C oe piece of jaquar.

Counter wash basin of jaquar.

Cabinet (2'-3" x 2'-0") of WPC board and charcoal linning.

Jet of jaquar.

Toilet paper holder of jaquar.

Angle valve of jaquar.

Long nose tap of jaquar.

Basin mixer of jaquar.

Towel ring of jaquar.

Providing and fixing sanitary items (Complete job).

Soap Dispenser.

Granite (2;-4" x 1'-10") including rounding the corner.

Looking mirror

Corner shelf.

Providing and fixing fixture to doors (complete job).

Slider door bolt of brass.

Handles of brass.

Tower bolt of brass 200mm.

Door stopper of brass.

Door closer.

Wooden table top.

Wooden pen stand.

Dust Bin

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone aggregate below 40mm size for an avg. lead of 10 Kms.

Crusher Bajri for an avg. lead of 10 Kms.

Good earth for an avg. lead of 10 Kms.

Brick for an avg. lead of 10 Kms.

Brick Tiles for an avg. lead of 10 Kms.

SUMIT SINGH

M/S MOHD ALYASS BHAT GOVT CONTRACTOR