Providing ICU and HDU in 100 Beded Multifacility Hospital In Kaithal Distt

Amount

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the walls is not to be dismantlled (b) Window (HSR 8.18(b))

First class brickwork laid in cement sand mortar 1:4 in first storey upto 4 meters above plinth level. (HSR 11.9) + Note 3rd Storey

Providing and fixing False Ceiling with grooves with 12mm to 15mm thick, 600mm X 600mm best quality mineral fibre tiles of approved make fixed on M.S. Steel runners frame i/c cost of screws angles, cleats, rawel plugs, with taping and painting, etc. complete in all respects as approved by the Engineer-In-Charge (HSR 13.93)

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in skirting / dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.90)

P.V.C.(vinyl) asbestos tiles as per I.S.3461-1961 coloured and marbled or mottled finish flooring on a smooth and damp proof base using adhesive as recommended by manufacturer including rolling with light wooden roller weighing about 5 kg complete in all respect as desired by Engineer-in-Charge. (b) 3 mm thick (HSR 14.75 (b))

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS, RAK & SIMPOLO. (HSR 14.89)

Pvdg & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in floors, laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS. (HSR 14.91)

12 mm thick cement plaster 1:4 (HSR 15.5)

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall (HSR 15.10)

Painting two coats with plastic emulsion paint on walls on new work to give an even shade (HSR 16.30)

Providing and Applying two coats white cement based putty over plastered surface and grinding the surface smoothwith sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K. / Birla make) (HSR 16.81)

Supplying and fixing hydraulic door closer, I.S.I.mark, with necessary screws, etc., complete (c) I.S.I. designation No.III (size of door 851 mm to 1000 mm ) (HSR 17.82 (C))

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/apppropriate Z sections and other ections of approved make conforming to IS;733 and IS;1285 fixed with rawlplugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc.aluminium sections shall be smooth,rust free straight mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling C.P brass /stainless steel screws , all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately) (HSR 17.95 + Note (i))

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS; 12823 grage 1 type II in panelling fixed in aluminium doors. Windows shutters and partition frames with c.p. brass /stainless steel screws etc. complete (b) Pre-laminated particle board with decorative lamination on both sides (HSR 17.97 (b))

Providing and fixing glazing in aluminium door, windows ,ventilator shutter and partitions etc. with pvc/neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items). (b) With Brass cover plate. (HSR 17.98 (b))

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS;6315 marked for doors including cost of cutting floors as required , embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box (a) With Stainless Steel cover plate.(HSR 17.99 (a))

Pdg. & Fixing G.I.Pipe complete with GI fitting and clamps, i/c cutting & making good the walls etc. (DSR 18.10) (a)15 mm dia pipe

20 mm dia pipe

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE EUROPEAN TYPE WATER CLOSET SUITE WITH CONCEALED ‘P’ or ’S’ TRAP with or without vent (as approved by the ngineer-in-Charge) and all other necessary fittings as fully described in item no.30.3 above (i) White (HSR 30.6(i))

PROVIDING AND FIXING POSITION BEST INDIAN MAKE FLAT BACK OR ANGULAR LIPPED FRONT URINAL 465 MM HIGH CONSISTING OF : - (i) Flat back lipped or angular urinal basin of VITREOUS CHINA WARE (to the approval of the Engineer-in-charge). (ii) 5 LITRES CAPACITY mosquito proof INDIAN MAKE C.I.AUTOMATIC FLUSHING CISTERN, PAINTED WITH non-yellowing white enamel paint or other approved shade enamel paint on outside and superior black bitumastic paint on inside complete with screwed 15 mm pipe; (iii) PAIR OF R.S.PR C,I. PAINTED BRACKETS AND BRASS COUPLINGS; (iv) Standard size G.I.FLUSH PIPE WITH C.P.BRASS WALL CLIPS AND UNIONS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOOR AND PAINTING OF FITTINGS ETC. (as required by the Engineer-in-charge). (i) White (HSR 30.19 (iv)(i))

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE size as give below ( to the approval of he Engineerin- charge) including china plug for tap hole where necessary ; R.S. or C.I.BRACKETS for building into wall including painting; 32mm C.P.BRASS WASTE WITH C.P. rass chain and rubber plug; 15mm C.P.BRASS SCREW DOWN PILLAR TAP WITH jam nuts or couplings best design (as approved by the Engineer-in-charge) ALL FITTINGS BEST NDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS, FLOORS AND PAINTING OF FITTINGS ETC. (HSR 30.42 (v))

Providing and fixing HDPE water storage tanks of Sintex, Diplast, O.K. make with covers/lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Engineer-in- Charge. (except civil work). (e) 1000 Ltr. (HSR 30.119 (e))