REP TO FLOORING PLASTERING SUNKEN FLOOR SANITARY PLUMBING FITTING AND MISC BR WORKS IN DEP BN RECORD OFFICE TEO AJIT VIHAR AT BEG C UNDER AGE BR II AND WELCOME MAINT REP TO MD ACCN OF OFFRS JCO AND OR AT BEG C DEP BN UNDER AGE EM I IN GE C KIRKEE

Amount

Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete all as specified and as directed.

Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and complete all as specified and as directed.

Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc complete all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/cum and 28 days average minimum compressive strength of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing (Mirror polish) complete all as specified and as directed.

S&F marble slab baroda green 20-25 mm thick (pre grinded and mirror polished) bedded jointed and painted with grey cement slurry incl cutting and grinding / polished laid over and including 15 mm in CM 1:6 bedding layer, the edges should be rounded and stone should be in one piece complete all as specified and as directed.

M&L Machine cut cudappah stone slab 16-20mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Ditto as per ser item No 08 but on step riser skirting over and including 10 mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L Kota stone slab flooring 16-20 mm thick over and including 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match including rubbing and mirror polishing complete all as specified and as directed.

M&L Kota stone slab 16-20mm thick in riser of steps, skirting, dado and pillar laid over and including cement screed 10mm thick in CM 1:4 and jointed with with grey cement slurry mixed with pigment to match including rubbing and mirror polishing complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

M&L double charged / Ultracharged dark shed vitrified ceramic tiles 8-9 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed by GE.

Ditto all as per item No. 13 here in before but in vertical surface / skirting, over and including 10mm thick cement plaster (1:4) as backing coat complete all as specified and directed by GE.

M&L double charged / Ultracharged dark shed vitrified ceramic tiles 8-9mm thick (square/rectangular) polished, area of each tiles exc 0.42 sqm but n exc 1.00 Sqm in floors over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed by GE.

Ditto all as per item No. 15 here in before but in vertical surface / skirting, over and including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed by GE.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by GE.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by GE.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by GE.

M&L for Glazed ceramic coloured tiles in vertical surface 450 X300x 7- 8 mm or 200 x 300 x 7-8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed by GE.

M&L for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement mortar 1:4 and rendering is to be finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L rendering 15 mm thick in cement mortar (1:6) on fair faces of block masonry surfaces or fair faces of brick work complete all as specified and as directed.

M & L for preperation new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparing new plastered surfaces of wall and applying two coats of cement based paint (any tint) over a coat of alkali resistant primer complete all as specified and as directed.

Taking up or down steel tubing and connection 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connection 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

S&F steel tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

S&F steel tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceilng etc) with all new fittings such as tees, elbows, unions, sockets, short lengths etc of 15 mm/20 mm bore of pipe complete all as specified and as directed.

S & F in repair chromium plated bib taps cast copper alloy with butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and as directed.

S&F in repairs 15mm dia bore chromium plated bib taps long body with capstan head handle with cup, screwed down, screwed for iron pipe or brass ferrule complete all as specified and as directed.

S & F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe bore dia 15mm complete all as specified and as directed.

S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ( Hot or cold) with long screwed shanks and fly nuts screwed for iron pipes bore dia 15 mm complete all as specified and as directed.

S & F in repair stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore dia complete all as specified and as directed.

S & F in repair Brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union for 15mm bore dia complete all as specified and as directed.

S & F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe of bore dia 15mm complete all as specified and as directed.

S & F in repairs Rubber or vulcanite plugs (waste) 32 mm dia with rings and including chromium plated brass or bronze chain and stay (chain n exc 50 cm in length) and fitting and fixing complete all as specified and as directed.

M & L in repair 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair 32 mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and as directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105 gms) complete all as specified and as directed.

S&F Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms) complete all as specified and as directed.

M & L in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190 gms) complete all as specified and as directed.

S&F 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

S&F 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc complete all as specified and directed.

S&F PVC(SWR) bends, for 110mm bore pipes, complete all as specified and as directed.

S&F PVC (SWR) bends, for 75mm bore pipes, complete all as specified and as directed.

S&F PVC (SWR) junction single (Single Y), equal or unequal, for 110mm bore pipes, with access doors, complete all as specified and directed.

S&F PVC (SWR) branch piece,75 mm bore pipe, single (single Y) equal or unequal complete all as specified and directed.

S&F PVC(SWR) junction single (Single T), equal or unequal, for 110mm bore pipes, with access doors, complete all as specified and as directed.

S&F PVC (SWR) junction single (Single T), equal or unequal, for 75mm bore pipes, with access doors, complete all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F in repairs 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S & F in repairs water closet (Squatt Pattern) complete incl provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and flushing pipe anti syphonage pipe etc complete and making good to floor all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (EWC) (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to down or out going pipe and to flushing pipe and syphonage pipe etc. of approved quality complete all as specified and as directed.

S&F in repairs water closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e. float valve, syphon, flushpipe,brackets complete all as specified and as directed by Engr-in-Charge.

S & F in repairs vitreous china wash hand basin white flat back size 550x 400 excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP brass wastes couplinng and other fittings complete all as specified and as directed.

S & F in repairs PVC connections(heavy duty for hot and cold water) 15 mm dia with brass nut on both ends and washers 450 mm long complete all as specified and as directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc incl taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point on independent board including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket incl taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 amps socket point on same board with other switches incl taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one two way light point controlled by two, two way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch etc taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

M & L for surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly for one 16 amps socket (Power) point independent board including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealled box for mounting of switch, socket all as specified and directed. NOTE: Two run of cable with one run of earth wire and one run of casing capping/conduit shall be measured as one length.

M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly incl taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two run of cable with one run of earth wire and one run of casing capping/conduit shall be measured as one length.

M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 2.5 sqmm as earth lead and connected to earth dolly incl taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two run of cable with one run of earth wire and one run of casing capping/conduit shall be measured as one length.

M & L for surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4 sqmm as earth lead and connected to earth dolly incl taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two run of cable with one run of earth wire and one run of casing capping/conduit shall be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly incl taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two run of cable with one run of earth wire and one run of casing capping/conduit shall be measured as one length.

M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10.0 sqmm as earth lead and connected to earth dolly incl taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: Two run of cable with one run of earth wire and one run of casing capping/conduit shall be measured as one length.

S&F 5 Amp switch piano type single pole one way incl taking down unsv one all as specified and as directed.

S&F 5 Amp switch piano type single pole two way incl taking down unsv one all as specified and as directed.

S&F bell push piano type one way 240 volt incl taking down unsv one . all as specified and as directed.

S&F socket flush type 6 amps, 5 pin, 230v incl taking down unsv one all as specified and as directed.

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 6 amps, 230v incl taking down unsv one all as specified and as directed.

S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v incl taking down unsv one all as specified and as directed.

S&F lamp Holder insulated body with back plate for batten fitting incl taking down unsv one all as specified and as directed.

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl taking out unsv CFL.

S&F LED lamp 3/7 watt, CDL, E-27 230V, PF-0.95 (min) incl taking out unsv CFL.

S&F ceiling rose surface Bakelite three terminal incl taking down unsv one all as specified and as directed.

S&F call bell electric, ding dong, AC 240 volt, 50 HZ. incl taking down unsv one all as specified and as directed.

S&F flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz incl taking down unsv one all as specified and as directed.

S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve incl taking down unsv one all as specified and directed. MAKE- Cat Part No- 4085-87 to 4085-95 of Legrand or equivalent from list of make as approved by GE.

S&F MCB, Double Pole, 6 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’C” curve incl taking down unsv one all as specified and directed. MAKE- Cat Part No- 4086-28 to 4086-36 of Legrand or equivalent from list of make as approved by GE.

S&F MCB, Four Pole, 40 to 63 amps, 415 Volts incl taking down unsv one all as specified and directed. MAKE- Cat Part No- 4087-00 to 4087-02 of Legrand or equivalent from list of make as approved by GE.

S&F Sheet metal enclosure two way, incl taking down unsv one all as specified and directed. MAKE- Cat Part No-5077 91 to -5077 93 of Legrand or equivalent from list of make as approved by GE.

M&L Taking down old DBs (4 way/ 6 way/12 way) and repairing, cleaning and refixing of same and making good the disturbed surfaces neat and clean of any size all as specified and directed.

S&F MCB distribution board, Double door, metal enclosure, TPN, 415 Volts, 4 way incl taking down unsv one all as specified and directed. MAKE- Cat Part No- 5076-70 of Legrand or equivalent from list of make as approved by GE.

S&F Vertical MCB distribution board, as MCB incomer, Double door, metal enclosure, TPN, 415 Volts, 4 way incl taking down unsv one all as specified and directed. MAKE- Cat Part No- 5077-25 of Legrand or equivalent from list of make as approved by GE.

S&F Vertical MCB distribution board, as MCCB incomer, IP 43 protection, Double door, metal enclosure, TPN, 415 Volts, 4 way incl taking down unsv one all as specified and directed. MAKE- Cat Part No-5077-45 of Legrand or equivalent from list of make as approved by GE.

S&F Metal plug and socket board with MCB SP 20 amp, 16 KA incl taking down unsv one all as specified and directed. MAKE- Cat Part No- 5078 11 of Legrand or equivalent from list of make as approved by GE.

S&F PVC rectangular switch board of size 300mmx 250mm x50mm incl necessary cutting slots for mounting switch sockets etc incl taking down unsv one all as specified and directed.

S&F PVC rectangular switch board of size 200mmx 150mm x50mm incl necessary cutting slots for mounting switch sockets etc incl taking down unsv one all as specified and directed.

S&F PVC rectangular switch board of size 175mmx 100mm x50mm incl necessary cutting slots for mounting switch sockets etc incl taking down unsv one all as specified and directed.

S&F PVC rectangular switch board of size 100mmx 100mm x50mm incl necessary cutting slots for mounting switch sockets etc incl taking down unsv one all as specified and directed.

S&F Hylam Sheet 3mm thick on existing concealled MS/CI ractangular or Squar or round box with 04 nos cadmium coated screws and cup washer incl cutting slots for mounting switch/socket/fan regulator/ batten holder etc incl taking down unsv one all as specified and directed.

S&F Round shaped recess mounted LED Flat panel down lighter, 12 watt (8"dia), suitable for POP celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable incl taking down unsv fitting any type all as specified and directed. Make-CG , Cat Part No LCDSPLN-R-12 CDL or equivalent from list of make as approved by GE.

S&F LED tube 20 watt retrofit to existing fluorescent FTL (T-8) fitting surface mounted after dismantling electronic ballast, internal wiring and complete rewiring with 0.5 sqmm copper flexible conductor FRLSHom connector block to one end of Bipi holder and including connecting up to ceiling rose with 0.5 sqmm two core flexible copper conductor cable all as specified and directed. Make-CG , Cat Part No LGT8-20-865 (2) or equivalent from list of make as approved by GE.

S&F industrial box type LED Batten with prewired suitable for LED tube 1x18/20 watt 4'long incl taking down unsv fitting any type all as specified and directed. Make-CG, Cat Part No-IGP161LT8-16 or equivelent from list of make as approved by GE.

S&F LED batten tube type, 2'long, 09/10 watt,CDL 230 Volts , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 nos incl taking down unsv fitting any type all as specified and directed. Make-Shakti Cat Part No- SZSLAMX010 or equivalent from list of make as approved by GE.

S&F LED fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos incl taking down unsv fitting any type all as specified and directed. Make-CG, Cat Part No LCTLN-20-CDL or equivalemt from list of make as approved by GE.

S&F LED building security light 15 watt, 230V with lens complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS Clamp and fastener incl taking down unsv fitting any type all as specified and directed. Make-Shakti, Cat Part No SZPSLMM015 or equivalent from list of make as approved by GE.

REPAIR TO CEILING FANS WITH FOLLOWING ITEMS OF WORK :- M&L for Rewinding of Ceiling fan 1200/1400 mm sweep after dismenting complete motor assy, bearings, bushings, removal of burnt copper wire, cleaning of core, inserting proper insulating paper in slots, winding with and as per existing size/turn of super enamelled copper wire, heating, vernishing, replacement of unsv bearings / bushings, assemble of rotor and stator unit with capacitor, connecting wire, down rod, blades and testing complete. Note: 1. Contractor will collect fans from the complaint cells of specified area and bring back to complaint cell after repair. Cost of transportation will be inclusive of quoted rate. 2. Spares require for replacement such as bearing, Bushing, capacitor shall be measured and paid separately as supply & Fixing only. 3. Cost of Connector bock and capacitor holder shall be inclusive of the quoted rate.

All as per item No- 102 here-in-above but for Exhaust fan 250/300 mm sweep industrial type.

S&F ball bearing No 6201/6202/6203/6204

S&F G.M. Bush bearing for ceiling fan as per existing pattern.

S&F capacitor AC for 230 volts 50 Hz of capacity 2.0/2.25/2.5 Mfd.

S&F capacitor AC for 230 volts 50 Hz of capacity 3.15 Mfd.

Painting of ceiling fan 1200/1400 mm including scrapping, cleaning and removing dust from the blade an body and applying two coat of enamel paint over & one coat of primer all as directed by Engr-in-chage

S& F in repair of exhaust and 300 mm PVC body, 230 vol incl taking down unsv fitting any type all as specified and directed.

S&F PVC insulated PVC sheathed single core copper flexible wire multistrand 4sqmm 3 core, ISI marked

S&F in repair thermostat ISI marked suitable for geysers 25 Ltrs to 50 Ltrs Capacity.

S&F in repair fusible plug marked suitable for 25 and 50 ltrs capacity Geysers all as specified and directed.

S&F in repair heating elementMarked round/triangular bas, push type or thread type including rubber washers for 1.5/2.0 KW all as specified and directed.

S&F in repair innner water container made of SS, vertical or horizontal type for 25/50 ltr capacity gyser all as specified and directed.

S&F in repair of aparatus plate suitable for vertical/horizintal type Geyser 25 or 50 ltr cap all as specified and directed.

Om Construction

MANIYA CONSTRUCTION CO.

L.K.R.TIWARI CONSTRUCTION