Interior fit out works in the office space of Coal India Ltd. at 3rd floor, Block III, East Kidwai Nagar, New Delhi.

S. No. DESCRIPTION UNIT AMOUNT TOTAL

A DSR MARKET RATE

1 A1 ARCHITECTURE INTEROR RS 35,47,541 1,47,78,087 1,83,25,628

2 A2 ELECTRICAL/LAN/wifi/FA/PA/AV/CCTV RS 37,98,832 1,27,94,753 1,65,93,585

Digitally signed by ASHWANI

ASHWANI KUMAR BANSWAL

SUMMARY OF INTERIOR WORK

S. No. HEAD DESCRIPTION AMOUNT TOTAL

DSR MARKET RATE

8 H Partions: Paint and polish ₹175,253.40 ₹0.00 ₹175,253.40

9 I Partitions: finishing material ₹229,631.03 ₹2,540,771.42 ₹2,770,402.45

13 M Furniture Chairs ₹1,668,679.74 ₹1,668,679.74

14 N Furniture Storages ₹751,403.30 ₹751,403.30

16 P Furniture Custom ₹263,098.95 ₹263,098.95

Grand Total ₹18,325,628.43

Grand Total ₹18,325,628.43

AS PER MARKET RATE

DSR S.NO DESCRIPTION OF ITEM UNIT QTY.

RATE AMOUNT RATE AMOUNT

A SUBHEAD A : Demolition & Civil work

A1 Dismantling stone slab flooring laid in cement mortar including

stacking of serviceable materials and disposal of unserviceable

material within 50 metres lead.

A2 Dismantling doors, windows and clerestory windows (steel or

wood) shutter including chowkhats, architrave, holdfasts etc.

15.12.2 complete and stacking within 50 metres lead : 15.12.2 Of area each 5 376 1,878

beyond 3 sq. metres

TOTAL 2,830 0

B SUBHEAD B : Civil Work

B1 Brick work with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above plinth

6.4.1 level up to floor V level in all shapes and sizes in :Cement cum 8 7,809 62,474

mortar 1:4 (1 cement : 4 coarse sand)

B2 Half brick masonry with common burnt clay F.P.S. (non

6.13 modular) bricks of class designation 7.5 in superstructure above

plinth level up to floor V level.

6.13.1 Cement mortar 1:3 (1 cement :3 coarse sand) sqm 100 957 95,660

B3 Extra for providing and placing in position 2 Nos 6mm dia.

every third course of half brick masonry.

B4 Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work

4.1 up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8

graded stone aggregate 40 mm nominal size)

1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone

Providing and laying Screed of cement Mortar ratio 1:1 of

sufficient minimum thickness not exceeding 10 mm, to give a

smooth& even surface and curing etc. complete as per engineer

MR B5 incharge instructions. Cost should be inclusive of hacking the sqm 150.00 354.61 53192

existing floor so that

IPS adhere to the existing floor.(Wooden & Carpet Flooring)

B6 PLASTER WORK

13.1.2 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) sqm 274 254 69,665

Providing and applying white cement based putty of average

thickness 1 mm, of approved brand and manufacturer, over the

plastered wall surface to prepare the surface even and smooth

C SUBHEAD C : FLOORING

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS : 15622, of

approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), including grouting

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

11.41 absorption less than 0.08% and conforming to IS : 15622, of

approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), including grouting

of Tile white cement

800x800 mm and matching pigments etc.,

C3 TILE 1 SKIRTING

Providing and laying vitrified tile skirting (100mm) in different

sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS : 15622, of

11.47 approved make, in all colours and shades, laid on 20mm thick

cement mortar 1:4 (1 cement : 4 coarse sand), including grouting

the joints with white cement and matching pigments etc.,

C4 TILE 2-SKIRTING

Providing and laying Glazed vitrified tile skirting sizes

(100mm) (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622,

of approved make of Varmora Series Majestic shade Flame

11.47 Ceillia laid on 20mm thick cement mortar 1:4 (1 cement : 4

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4

stone aggregate) finished with a floating coat of neat cement,

11.3 including

cement slurry, but excluding the cost of nosing of steps etc.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate sqm 150.00 498.35 74752.50

C5 Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by

8.31 Engineerin- Charge, in skirting, risers of steps and dados, over sqm 75 1,030 77,273

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of

matching shade complete.

Providing and fixing stone slab with table rubbed, edges

rounded and polished, of size 75x50 cm deep and 1.8 cm thick,

fixed in urinal partitions by cutting a chase of appropriate width

with chase cutter and embedding the stone in the chase with

epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregate 6 mm nominal size) as per

direction of Engineer-in-charge and finished smooth.

8.10.2 Granite Stone of approved shade sqm 45 3,217 1,44,761

C7 acoustic panel

Providing and fixing Fabric Wrapped Glass Fiber Acoustic

Panels for Ceiling and Walls. Acoustical Wall Paneling with

square edges made of fiber glass substrate 25mm thick and

wrapped on the front side with an acoustically transparent and

fire- resistant fabric with an option of colors as per the choice of

theEngineer in charge of size 1200x600mm providing a

minimum sound absorption level of 0.90 NRC. Installation of

MR Acoustic Fabric panels on GI frame work of section 50mm x

50mm. GI panels fixed horizontally at spacing of 600mm C/C.

9mm thick Perforated MDF Board backed with 50mm thick

60Kg/m3 density rockwool ( UL Certified ) fixed on the frame

work. Then the Fabric Wrapped Acoustic Wall Panel shall be

fixed. Fabric Wrapped Acoustic Wall Panel fixing

Providing & Fixing 25mm X25mm PINE WOOD BATTENS of

specified finish with screws and polishing with 3 coats of

melamine polish complete as per instruction of the Engg in

C9 Triangular Box ceiling

Providing and fixing Triangular Box ceiling is manufactured

from light weight G.I and folded into U Shape profiles. Each

panel has a nominal cell wall thickness of 15mm to give a

precise engineered ceiling appearance. It has a width of 15mm

and height 60mm. Maximum length available is 2 metre and its

thickness is(.45mm) in G.I. It has equilateral trinagles having sqm 38 5,985 227,437

each side length 175mm. It allows fire detection and control

system, airconditioning and other services to be located within

the ceiling void. the ceiling should have the 60 micron powder

coating of approved colour as per direction of Engineer in

C10 BAFFLE CEILING

Providing and fixing of Baffle ceiling system comprises of

40mm x100mm (40mm width & 100mm Height) U Shape

panels. Panels shall be made of 0.5mm thick galvanized steel

Powder-coated and length upto 3600mm. Panel shall be high

corrosion resistance and good color stability. Centre to Centre

panel gap will be 150mm. Panels are fixed on to roll formed

carriers 20mm wide x 40mm deep out of 0.80mm G.I sheet

Powder-coated color with cutouts to hold the panels in module

of 50 mm at maximum 1200 m c/c. Carriers are suspended from sqm 20 5,592 111,832

the roof or truss by 4mm dia. galvanized steel wire rod hanger

with special height adjustment suspension clip at

max.1200mmc/c. Hangers are fixed to the roof by "J" hooks or

ceiling brackets and nylon inserts. Panels are factory cut in

lengths upto maximum 3.6m to suit site dimensions or

shopdrawings.Top cap and side cap are used to cover the edges

Supply of modular carpet of approved model & shade,made with

100% nylon 6/6 tufted tile of minimum 500mm X 500mm in

size , stain resistant, Loop piles, rubbing fastness and castor

chair suitability as per requiremets of commercial usage & glass

reiforced pvc backing & Carpet tile, made of pile giber material

MR 100% nylon, shangai Vista shade construction of level loop.of

Pile Height : 3mm (+ 5%) , yarn weight : 20Oz/Sqmt. comprise

with weight of 4000g/sqm approx, flame resistant : ASTM E662

smoke density, having a Tuftinng Gauze 1/64" with pile

C12 ALUMINUM SKIRTING

Supply of Aluminium Skirting Designed to be installed on wall,

gypsum and plywood partitions and on top of all kinds of

flooring Installed using screws, to camouflage the rivet points. a

capping strip is provided either in PVC of matching color or

MR aluminium. Supplied with pre-drilled holes and protection tape M 255 163 41,466

which is removed after completion, Matching corner guards are

provided with the profiles

SUBHEAD D: CEILING

D1 GYPSUM BOARD CEILING

Providing and fixing false ceiling at all height including

fixing of frame work made of special sections, power pressed

M.S. sheets and galvanized with zinc coating of 120 gms/sqm

side inclusive) as per IS : 277 and consisting of angle cleats of

25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at

1200 mm centre to centre, one flange fixed to the ceiling with

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other

of cleat fixed to the angle hangers of 25x10x0.50 mm of required

length with nuts & bolts of required size and other end of angle

hanger fixed with intermediate G.I. channels 45x15x0.9 mm

at the spacing of 1200 mm centre to centre, to which the ceiling

12.5 mm thick tapered edge gypsum plain board

12.45.1 conforming to IS: 2095- (Part I) : 2011 (Board with BIS SQM 410 1,117.65 458,236.50

certification marks)

D2 GYPSUM COVE

Making cove with gypsum board and wooden ceiling and

MR making the cove in line and level as per the direction of the M 150 294 44,067.25

engineer in charge.

D3 PLYWOOD LAMINATE CEILING

Providing and fixing wooden false ceiling, consisting of 1.5

mm decorative laminate on 18 mm ply, at all heights including

including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with

zinc coating of 120 gms/sqm (both side inclusive) as per IS :

277 and consisting of angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5

12.45.1 mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length SQM 50 3,083.82 154,190.87

with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at

the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre

to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64

mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having

flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

D4 CHANNELED WOODWORKS G21 (LG1012)

Providing and Fixing Channeled Woodworks perforated panels

of width 192mm, thickness of 15mm and length 2400 mm or as

required by the Architect/ approving engineer, made of a high

density fibre board with minimum 725 Kg/M3 density substrate

with a laminated facing as per the approved shade & finish and

a melamine balancing layer on the reverse side. The boards shall

have a special perforation pattern where the visible surface has a

“Helmholtz” fluted perforation of 3mm width and 21mm of

MR visible panel each. The edges of the panels shall be “tongue-and- SQM 18 4,241 76,338.00

grooved” to receive special clips for installation. The back of the

perforated panel shall have sound absorbing non-woven

acoustical fleece having NRC of 0.52. The panels shall be

mounted on special aluminium splines using clips provided and

approved by the Architect/ Engineer-in-Charge.

D5 Mineral Fibre Ceiling

Providing and fixing 15mm thick Mineral Fibre fleece

coated Ceiling Tiles with VT S-15 Edges of size 300 x

1200mm in true horizontal level suspended on Ultraline black

revealed (White with black groove) inter locking metal grid of

hot dipped galvanised steel sections (galvanized @ 90 gsm/sqm)

consisting of Main "Tee", size 15x42x3600mm made from

0.35mm thick (minimum) precoated sheet having mitre cuts at

1200mm, spaced at 1200mm centre to centre and Cross "Tee",

of size 15x35x1200mm having mitre cuts at 300mm, to be

MR interlocked between the main T runners at the distance of sqm 151 2,497 377,080.98

1200mm centre to centre to create 1200x1200mm module.

Cross "Tee", size 15x28x1200mm without mitre cut to be

interlocked at middle of the two cross tess of 1200mm with

MC300, to form grids of 300x1200mm to lay 15mm thick

mineral fibre false ceiling tiles in VT S-15 edges of approved

texture in the grid including, wherever, required, cutting /

making, opening for services like diffusers, grills, light fittings,

fixtures, smoke detectors etc. Perimeter trim to be L shaped

angle of size 22x19x3000mm, in 0.40mm thickness of GI sheet,

screwed to wall at 450mm maximum centres. Main "Tees" to

D6 Grooved acoustic ceiling

Supply of Grooved Composit Acoustic Panels, made of

acoustic polyester fiber pad pasted on perforated wooden panels

by rubber based adhesive for rigid fixation. Total thickness of

the Acoustic panel will be 25 mm and having Groove Size

3.2mm at an interval of 28/62 mm c/c as per acoustic

design/Architects approval. All joints of Polyester fiber acoustic

panel should have dowel connection to avoid any sagging

/unevenness. The Composite acoustic panels to be backed with

black acoustic fleece. Composit Acoustic Panels should be

fixed on GI ‘Z’ clamp made out of 1 mm thick GI sheet of size SQM 45 4,336 195,107.22

30 mm x 30 mm collar and 50 mm high to match with the

installed GI frame. The ‘U’ channel grid of size – 50 x 32mm

thick made out of GI sheet, 0.5 mm thick, ISI mark. The grid

size will be – 600 x 900mm fixed to wall using all screws of

Stainless steel. Cavity of grid shall be filled with Tissue fiber

paper laminated Rockwool density 60 kg/cum confirming to IS

8183, UL Certified to achieve 1/3 Octive Hz average NRC

Value 0.86 for 630Hz, 800Hz & 1000Hz. The Grooved

Composit Panel of size 600 x 600x600/1200/2400 mm with a

perforated pattern on its back hole dia 08/10 mm or as per

E1 G.I. SECTIONS FOR WALL PANELING

The Gypliner wall lining : 45mm Gypliner channel section

(0.40mm thick having

two flanges of 18mm each) placed at 610mm centre to centre in

angle(0.40mm thick having two flanges of 25mm each) is fixed

to floor and ceiling

9.133 with nylon sleeves and steel screws at 610mm centres. Fixing SQM 190.00 443.24 84216.04

ANALYSED bracket (0.90mm thick,

29.5mmwide, 195mm long) is fixed to the wall with the help[ of

nylon sleeves and

steel screws at 900mm centres to hold the Gypliner section in

position and level. Work to be done as per the satisfaction of

Engineer in Charge

100 mm Metal stud partition , 100mm thick Gypserra™ stud

fixed to C-stud. 48x0.5mm Gypserra™ C-stud {Material-IS

513, Y/S-300Mpa, Finish - AZ150 (IS 15961)} placed at

610mm c/c in 50x0.5mm Gypserra™ {Material-IS 513,Y/S-

300Mpa, Finish - AZ150 (IS 15961)} floor and ceiling channel.

Floor & Ceiling channel is anchored to the floor & True ceiling

using Gyproc® Rawl plug Ø8x45mm {MaterialIS 513 CR1

grade, Zinc coating, Pull Out Load-6.8kN for M30 concrete

MR grade} /Hilti X-GN20MX anchor fasteners at 600mm c/c in SQM 380.00 503.68 191400.10

centerline. Floor channel to be wrapped with 70µ Self Adhesive

LDPE moisture barrier film to further improve corrosion

resistance performance. 12.5mm thick Gypboard® Plain board

strip of 50 mm width is placed between ceiling channel and RCC

ceiling slab to improve fire performance of the system. A

Gypserra™ noggin channel {Material-IS 513,Y/S-300 Mpa,

Finish - AZ150 (IS 15961)} of 48x0.5mm width has to be

provided at the horizontal joints of the two boards. First layer of

Gyproc® boards to be screw fixed with Gyproc® drywall

screws of 25mm at minimum spacing of 600mm at centre and

E3 GYPSUM BOARD FOR PARTITION

Providing and fixing one layer of 12.5mm thick Standard

Gypsum plasterboards (Confirming to IS 2095: Part 1) is screw

fixed vertically to either side of Ultraframe wall Studs with

25mm long Drywall Screws at 300mm centers. The screw fixing

of Gypsum plasterboards to the metal framing at the periphery,

openings and cut edges should be at 150mm centers. The

horizontal & vertical joints of the Gypsum plasterboards on

both sides of the metal framework must be staggered so as to

avoid through and through joints. All joints to be taped &

finished and 1mm putty with 50mm wide Paper tape & All

Purpose Joint compound. (Confirming to ASTM C475)

E4 FIRE RESISTANT GYPSUM BOARD

Providing and fixing partition upto ceiling height consisting of

G.I. frame andboards, fixed to the studs using metal to metal flat

head screws, including jointing and finishing to a flush finish

with recommended jointing compound,

jointing tape, angle beads at corners (25 mm x 25 mm x 0.5

mm), joint finisher and two coats of primer suitable for board as

per manufacture's specification and direction of engineer in

charge all complete. required board, including providing and

fixing of frame work made of special section power pressed/ roll

9.105 form G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide

having equal flanges of 32 mm and 0.50 mm thick, fixed to the

floor and ceiling at the spacing of 610 mm centre to centre with

dash fastener of 12.5 mm dia meter 50 mm length or suitable

anchor fastener or metal screws with nylon plugs and the studs

48 mm wide having one flange of 34 mm and other flange 36

mm and 0.50 mm thick fixed vertically within flanges of floor

and ceiling channel and placed at a spacing of 610 mm centre to

centre by 6 mm dia bolts and nuts, including fixing of studs

along both ends of partition fixed flush to wall with suitable

75 mm overall thickness partition with 12.5 mm thick double

skin fire rated Glass Reinforced Gypsum (GRG) plaster

9.105.1 board conforming to IS: 2095: (part 3) : 1996 (Board with SQM 25.00 1741.15 43528.75

BIS certification marks)

Total Subhead E 43529 425911

F SUBHEAD F: Partition Finish 1

F1 GLASS WOOL INSULATION

Providing and fixing thermal insulation with Resin Bonded rock

12.62 conforming to IS: 8183, having density 48 kg/m3,50 mm SQM 280.00 282.55 79114.00

thick,wrapped in 200 G Virgin Polythene Bags fixed to wall

F2 12MM THICK PLY

Providing and fixing plain lining with necessary screws/nuts &

bolts/ nails, including a coat of approved primer on one face,

and fixed on wooden /steel frame work, complete as per

direction of Engineer-incharge (Frame work shall be paid for

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type

Providing and fixing plywood 4 mm thick, one side decorative

veneer conforming to IS: 1328 (type-1), for plain lining /

8.28 cladding with necessary screws, including priming coat on

unexposed surface with :

8.28.1 Decorative veneer facings of approved manufacture SQM 160.00 1551.00 248160.00

F4 French spirit polishing :

Two or more coats on new works including a coat of

Providing & Fixing decorative high pressure laminated sheet of

plain / wood grain in gloss / matt/ suede finish with high density

protective surface layer and reverse side of adhesive bonding

quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

Total Subhead F 743726 0

G SUBHEAD G: Partition Finish 2

G2 LACQUERED GLASS

Providing and fixing of 6 mm thick annealed SGG Planilaque

Evolution (premium GRIHA rated lacquered glass from Saint-

Gobain) or approved equivalent of color as approved by

Architect/ Engineer-in-charge, fixed with SGG ULTRAFIX

(compatible neutral core silicon / double sided tape) or

approved equivalent on a perfectly leveled 12mm thick BWP

marine plywood mounted on the RCC wall/any other structure.

Lacquered glass must be made industrially (via curtain coating

process); opaque (if viewed against a support wall), coated with

MR PU lacquer (50 micron thick); color consistency (measured by SQM 58.00 3344.46 193978.97

Minolta spectrophotometer CM5081); highly durable (passes

PERSOZ hardness test for minimum 220 oscillatios); humid

resistant (conforms to BS EN 1036 1999); environmentally

friendly (no lead, no arsenic, no copper, noformaldehyde);

appropriate recycled content (12% post industrial / 6% post

consumer); compressive strenght (1000 MPa) & tensile strenght

(40 MPa),same as float glass at all heights and levels, all

complete as per drawings and as directed by Engineer-in-charge

Providing and fixing 6mm bewelled edge Mirror of required size

with hard wood frame and necessary SS screw fixed with 6mm

ply all complete as per directions of Engineer-in-charge

G4 acrylic solid surface

Supplying, fabricating and installing in position, acrylic solid

surface made up of PMMA, MMA and Aluminum-tri-hydrate..

Product shall be chemically resistant, fully homogenous with no

pores, extremely repellent to dirt/wear/tear and thus shall be

simple and easy to clean. Density >/= 1650kg/m3, Impact

MR resistance>/=25N. Product thickness shall be 12mm and comes SQM 15.00 10373.02 155595.33

in sheets of size: 750mm x 3600mm. Product applications

include for counter top, wash basin and wall cladding to achieve

highest level of hygiene standards and is available in multiple

Concept Creation

Creating design and creation of Art work concept on given

subject. With initial visit to site, preparation of various designs

with different material, providing the samples, t for

approval, improvisation in short listed creative’s and making of

final design for final production by enlargement of drawing as

per ratio of actual size, to prepare detailed working shop

drawings (full scale) based on the Concept drawings / Views /

Analysed G5 site conditions, display of actual size dummy /mock up sqft 110.00 5,711.65 628,281.75

8.11 Fabricated in sun board with digital print for client approval

Artwork Execution

Towards the cost of execution of artwork in stone (any stone

dholpur/granite/Italian or any other stone which the artist find

appropriate for executing the artwork thickness 12 mm to 19

mm or more. ) by qualified sculpture/artist .The cost includes

execution and installation at site. Cladding of stone can be dry

or wet procedure as per site condition and size of artwork.

Total Subhead G 0 985153

H SUBHEAD H: Paints and Polish

ACRYLIC EMULSION PAINT

Wall painting with acrylic emulsion paint, having VOC

13.82 H1 (Volatile Organic Compound ) content less than 50 grams/ litre,

of approved brand and manufacture, including applying

13.82.2 additional

Two coats coats wherever required, to achieve even shade and SQM 1050.50 106.80 112193.40

Applying priming coats with primer of approved brand and

13.85 manufacture, having low VOC (Volatile Organic Compound )

With water thinnable cement primer on wall surface having

13.85.3 VOC content less than 50 grams/litre SQM 1051.00 60.00 63060.00

Total Subhead H 175253 0

MR-10 FACTORY MADE KITCHEN

MR Providing and fixing of kitchen carcasses made out of 18 mm

thk. Commercial ply both side Laminated, shutters in 18mm thk

Plywood with laminate finish. All hardwares like SS Handles ,

Slow Motion Hinges shall be as per approved makes. The

10.A bottom portion of carcases shall be finish with PVC Skirting as

shown in the design and drawing of the architect:

Handleless Profile

MR 10B.1 Soft Close Drawer S/D Nos 2 5,920.45 11,840.90

MR 10B.2 Soft Close Drawer H/F Nos 6 7,047.27 42,283.59

MR 10B.3 Sink Double Bowl (40x20) Nos 1 22,554.99 22,554.99

MR 10B.4 Sink Connector Nos 1 1,973.00 1,973.00

MR 10B.8 Dish Rack 900MM Nos 1 5,624.00 5,624.00

MR 10B.10 Cutlery Tray 900MM Nos 1 9,162.74 9,162.74

10.0 STEEL WORK

Providing and fixing carbon steel galvanised ( minimum coating

5 micron) dash fastener of 10 mm dia double threaded 6.8 grade

(yield strength 480 N/mm2), counter sunk head, comprising of

10 m dia polyamide PA 6 grade sleeve, including drilling of

hole in frame , concrete/ masonry, etc. as per direction of

Engineer-in-charge.

Structural steel work riveted, bolted or welded in built up

sections, trusses and framed work, including cutting, hoisting,

fixing in position and applying a priming coat of approved steel

primer all complete.

Steel work in built up tubular (round, square or rectangular

hollow tubes etc.) trusses etc., including cutting, hoisting, fixing

10.16 I14 in position and applying a priming coat of approved steel

primer, including welding and bolted with special shaped

washers etc. complete.

10.16.2 Hot finished seamless type tubes Kg 340.00 157.50 53550.00

TOTAL STEEL WORK

11.0 WATERPROOFING WORK

Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C., kitchen and

the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS 2645 in

recommended proportions including rounding off junction of

vertical and horizontal surface.

(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse

sand) mixed with water proofing compound in recommended

proportion including rounding off junction of vertical and

horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied

hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at

joints of PVC sheet should be 100 mm wide and pasted to each

other with bitumen @ 1.7 kg/sqm).

Flush door and Glass door

Providing and fixing specified wood frame work consisting of

battens 50x25mm fixed with rawl plug and drilling necessary

holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood Cum 0.58 165255.05 95847.93

9.21 Providing and fixing ISI marked flush door shutters conforming

2202 (Part I) non-decorative type, core of block board

construction with

I17 frame of 1st class hard wood and well matched commercial 3 ply

veneering with vertical grains or cross bands and face veneers on

faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges SQM

with necessary screws 18 1,886.70 33,960.60

Providing and Fixing Hardware for Flush Door ) - BRASS

TOWER BOLT, TRIANGLE, 12", SATIN,

BB,SQUARE CORNER,WITH TIMBER DOOR SCREW ( for

non fire rated doors),MORTISE CYLINDER LOCKCASE,

55MM BACKSET, 72MM CENTER DISTANCE, 24MM

MR I18 SQUARE FOREND, SS MATT - Hollow O Lever Handle On

Rose With Europrofile Cylinder Escutcheon

Euro Profile Thumb Turn Cylinder With Key, 31.5+31.5 =

63Mm, Floor Mounted Door Stopper, Half Round as per the

directions of Engineers InCharge

Providing and fixing 10 mm thick frameless toughened glass

door of approved brand and manufacture, including making

necessary holes etc. for fixing required door fittings, all

M.R. I19 complete as per direction of Engineer-in-charge (Door handle, SQM 36.00 2187.43 78747

lock and patch fittings etc.to be paid separately).

Providing and fixing hardware for wooden and glass doors

including necessary screws, hardware etc. all complete as per

drawings and as directed by Engineer-in-charge

double action floor spring with 90° hold open and ss cover

plate, size 3 (without accessories), max. door leaf weight 90kg

MR I20 ,ss matt,for door widths 850-1000mm EACH 9.00 9259.16 83332

corner patch lock with cylinder fo 10-12 mm glass, ss matt

bottom patch fitting,for 10-12mm glass, ss matt, top patch

fitting for 10-12mm glass, ss matt & top pivot with ss plate for

MR I22 glass doors with wooden fixed panel on top, ss matt EACH 9.00 3708.56 33377

h pull handle back to back fixing 25mm dia x 305 c/c 450 o/a

MR I23 max. door thickness - 55mm EACH 18.00 3261.00 58698

stainless steel half round floor mounted door stop, ss matt

J SUBHEAD I: Finishing Material

Supplying of designer wallpaper as per approved samples

contains 10% recycled content, fabric total weight 14-20 oz/sqr

yrd, thickness 0.021 inches, tensil strength ( F&W) - 65

warp/65fill, tear strength- 35x30, Fire resistance- NFPA corner

burn test passed, Class A NFPA 101 life saftey code passed, UL

MR J1 723 ( Astem E84) Base rate -. 305/ sqft, Test results sqm 80.00 4722.83 377826.68

Flame/Smoke- 20/45, can contribute to LEED MR 5.1 for

regional materials, Certified to NSF/ANSI 342 sustainability

assesment, meets section 01350 IAQ test requirements. Its is

water bases, ready to use and have microbial prperties.

Supplying of designer wallpaper as per approved samples

contains 10% recycled content, Nonwoven/acrylic fabric total

weight 8-15 oz/sqryard, thickness- .02 inches, meets section

J2 01350 IAQ test requirements. water based, ready to use and

works with a variety of substrates, have microbial prperties and

J3 GLASS FILMS

Supply & Installation of 3M Crystal Glass film FROSTED (

Sparkle effect ) Selfadhesive, bubble‐free installation to be done

on clean glass , by Authorized Installers only.3M Interior

Warranty for a period of 15 Years for interior application, 3

Years for exterior application to be submitted along with

Providing & fixing of Roller Blinds as per the approved

sample with fabric made up of 28% Polyester and 68% PVC

4% aluminium layer on the back, 125tex Tilter Basket weave of

thickness 0.53mm ±5% (ISO 2286-2) and wieghing 407gsm±5%

with openess factor of 5% .The tear resistance (Warp

172N±10% & ,Weft 153N±10%) As per ISO 544674, and pass

NFPA 701 Fire Resistance test.Solar

transmittance,Ts%(11),Solar reflectance Rs%(45),Solar

Absortance As%(44),Light Transmittance Tv%(4) & UV

MR transmittance Tuv%(7). The control clutch drive unit engineered sqm 25.00 15542.26 388556.60

heavy duty chain drive pulley operating system consisting of

gear clutch housing and locking plug containing minimum 6 ribs

and inserted at minimum of 37mm into roller tube. It is self

lubricating Exclusive clutch with safety pins for secure bracket

installation and unlocking pin for quick manual removal.

Universal clutch is most convenient for large windows down to

the smallest windows. It shall be driven by a ball chain pulley

with ball chain and can be positioned at Right hand or Left hand

side of the shade. Clutch gear ration 1.75:1 for reduced

operating force on larger blinds. Tube bearing plug idler

J5 Blinds -2: OPAQUE ROLLER SHADES

Plain Cassette:Roller Blind Top Cassettes extruded by Non

rusting Aluminium alloy (6063 T) with powder coated for long

life. The Cassettes is designed with support beam to keep it

straight and shall have a pocket for holding the fabrics in

position. Available in 32, 38 & 45 mm Plain Cassettes for small

and big blind respectively. Hardware Specification

Control Unit:The Roller mechanism to be operated with Control

unit is made of high strength polyoxymethylene Plastic. The

mechanism shall be operating with the use of a Ball chain. As

MR per requirement, there should be an option of left or right sqm 60 4055.38 243322.77

Ball Chain:The Ball chain should be made up of unbreakable

polyethylene plastic, 1.50 mm Polyester cord with 4.50 mm

balls. The blind should be able to be stopped at any desired

position with the help of a stop lock. Chain jointer is used to

secure the chain.

Tube:The roller tube extruded by non-rusting Aluminium alloy

with grade (6063T) with 1.10 mm thickness. The Channel is

designed with support beam to keep it straight and shall have a

J6 SIGNAGE - 1

MR Company name "COAL INDIA LIMITED"cut in SS brush 3d

letter (SS304) of text ht. 600 and of deph 1.5" font to be cut to

sizes and directly installed on available base as per with

approved acrylic fixture with provision to change the plate ITEM 16.00 5180.75 82892.07

whenever deemed necessary, including necessary hardware,

substructure, extra, as specified and directed by Engineer in

J7 SIGNAGE - 2

MR Various Direction signages of exit and washroom identification

with LED glow panel and proper fixture for installation and ITEM 8.00 5324.66 42597.32

connection 20"x9"

J8 SIGNAGE - 3

MR Providing making and fixing in position custom made SS

siganges of sizes 16"x5"as per Architectural drawings and ITEM 10.00 2230.60 22306.03

instruction with approved SS fixtures, approved base including

Factory made items

Full or half height Storage /Cupboard: P/F of storage unit

600mm deep consisting of double leaf openable shuttered

finished with 1mm thick approved laminate of

Century/Merrino/Green or equivalent as per make list on front

faces over 19mm thick board frame on top ,bottom & sides and

6mm thk ply on back side of cabinet using approved board or

MR J9 equivalant including drawer units,shelves finished colour as per sqm 11.00 15,853.38 174,387.22

Interior dwg. with necessary hardwares of Hafele or equivalent

as per make list like concealed Hinges, magnetic

catcher,locks,handles, knobs complete etc. at all aspects. All

internal and back sides shall be white laminate or enamal paint

of approved brand . All exposed surface to be treated with anti

termite and fire reterdant paint before painting work complete etc

Total Subhead J 229631 2540771

MR K Alumunium Fixed partition

Supply & Installation of Full Height Wideline Partitions sqm 40 6534.04 261361.74

systems of size 100 x 25 mm thick section for the partitions

using verticals at the solid partition junction & Horizontals at

top & bottom with snap on option for installating glass & 'T'

K1 Section, corner Section & Vertical "I" Section between Glass to

glass from FFL upto 2600mm Complete in all respect

considering 10 mm thk toughened glass with double sided

adhesive tapes for glass to glass butt joints all complete as per

drawings and as directed by Engineer-in-charge

L SUBHEAD K : ART WORK

Poviding and fixing Digital printed Replica of selected

painiting (art work) on Canvas, mounted over canvass frame,

MR L1 and to be hung to partition with suitable accessiories and Sqft 53.00 3098 164214

complete in all respects

L2 "WALL LOGO COAL INDIA LIMITED- 1 SQM (6 LAYERS)"

Total Subhead K

Snos. Location Specifications Unit Qty Price Amount Ref. Image

Providingin place of main table with overall size of table 2350 x 2350 x 750mm. The main table shall be of size 2350 x

1150 x 750mm. The side unit shall be 1200 x 600 x 750mm. The table is made of 25 mm thick MDF – one side pre-

laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-

build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side

pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is

made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed

on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge

banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2

grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF

one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type

which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft

closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

The Back Unit shall be of dimensions 2350 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate

board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm

Back Unit thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. no.s 1 41904.44 41904.44194

Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with

lock for security.

Supplying and placing in position Table of the following specifications. Table with CPU Hanger size shall be 1500 Width

mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges

shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated

particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy

DIRECTORS polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat (

longe TABLE epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon

6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster)

plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle

and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy

polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) .

Providingin place of main table with overall size of table 2100 x 2250 x 750mm. The main table shall be of size 2100 x

1050 x 750mm. The side unit shall be 1200 x 500 x 750mm. The table is made of 25 mm thick MDF – one side pre-

laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-

build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side

pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is

made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed

on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge

banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2

grade and approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF

one side pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type

which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft

closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate

board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm

Back Unit thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. no.s 2 37991.03 75982.06902

Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with

lock for security.

Providingin place of main table with overall size of table 1650 x 1650 x 750mm. The main table shall be of size 1650 x 750

x 750mm. The side unit shall be 900 x 450 x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate

board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft closing access flap within-build

power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-

laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of

25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to

top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded

with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side

pre-laminate board with 0.4 mm PVC membrane pressed on to top pedestal construction is BOX-BOX-FILE type which

uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing &

anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

The Back Unit shall be of dimensions 1650 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate

board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm

Back Unit thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. no.s 4 37794.51 151178.0475

Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with

lock for security.

Providing and placing panel & tile based modular manager module, with partition thickness as 52.4 mm thk and

ht - 1200 including powder coated aluminium trims. Tiles: Combination of top tiles are fabric magnetic/fabric/fabric

tackable/white board/glass writing board/ clear glass tile/ plain metal/ prelam tile. Bottom tiles - Plain metal/ fabric

magnetic / fabric / laminated /prelam. The panel thickness comprises of 38mm (35 mm Minimum) thick paper honeycomb

+ 3mm MDF on each sides + 0.6mm decorative laminate or fabric on both sides. The uprights and horizontals shall be

made of aluminium extrusion having average wall thickness of 1.2 mm & powder coated with epoxy- polyester

powder. Particle board framing is used on outer boundary of these blocks as well as intermediately at certain locations

Manager forming conduit for passing cables. These blocks are located in the mid segment of the panels and can be provided

TA-5 Modular Cabins with cutouts for mounting switch boxes (above or below the worktops)Fabricated bottom frame for 52.4mm (50mm no.s 12 120865.43 1450385.198

/ PA / Jr. Officer Minimum) panel comprises of L-channels made of 2mm thick CRCA steel (IS: 513), formed plates of 3mm thick HR steel

(IS: 2062) & ERW steel tube of size 35 mm (30 mm Minimum) x15 mm (10mm Minimum)x1.6mm thick in oval

cross section (IS: 7138) welded together. This frame is bolted to the uprights with M6 screws. Top tiles can be offered in

variety of combinations. Worksurface- out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size

1650mm W x 600mm D main worktop and 900mm W x 450mm D side unit top. Height shall be 750mm. Brackets shall be

made from 2mm thick CRCA steel. Pedestals with legs - Nova pedestal flat metal front, free standing central locking

of size 390 mm w x 435 mm d x 646 mm height 3dr = 2box+1file. The work shall be carried out as per the

instructions and guidance received from engineer incharge.

Providing and placing ALL WOOD HINGED DOOR UNIT (HDU) Size:- 900 (W) X 695 (H) X 450 (D). Construction &

Material Knockdown construction. Door Opening Twin door with self closing hinges of Wood made from18mm Thick Pre

Laminated Board. Handle · Aesthetically appealing recessed plastic handle for& wooden Doors. Locking Mechanism Cam

Storages with lock · 3 point locking mechanism in Wood Door Shelving· Wooden Top shall be be made from Pre-Laminated Board of 25

Managers mm thk. Skirting of 125 mm High shall be provided. Leveler Screw type adjustable Leveler with plastic base. height. Back

Panel and Sides of the storageunits will be made out from 18mm thick Pre-Laminated Particle Board. Note: All partitions

and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 10mm of uneven flooring.

The work shall be carried out as per guidance and instructions received from engineer incharge.

Providing and placing panel & tile based modular workstation, with partition thickness as 52.4 mm thk and ht -

1200 including powder coated aluminium trims. The fins along the depth shall be 22.8mm thick. Tiles: Combination of

top tiles are fabric magnetic/fabric/fabric tackable/white board/glass writing board/ clear glass tile/ plain metal/

prelam tile. Bottom tiles - Plain metal/ fabric magnetic / fabric / laminated /prelam. The panel thickness comprises of

38mm (35 mm Minimum) thick paper honeycomb + 3mm MDF on each sides + 0.6mm decorative laminate or fabric on

both sides. The uprights and horizontals shall be made of aluminium extrusion having average wall thickness of 1.2 mm

& powder coated with epoxy- polyester powder. Particle board framing is used on outer boundary of these blocks as

Workstations no.s

well as intermediately at certain locations forming conduit for passing cables. These blocks are located in the mid

segment of the panels and can be provided with cutouts for mounting switch boxes (above or below the

worktops)Fabricated bottom frame for 52.4mm (50mm Minimum) panel comprises of L-channels made of 2mm thick

CRCA steel (IS: 513). Top tiles can be offered in variety of combinations. Worksurface- out of 25 mm thk prelam particle

board with flat pvc lipping edge banding. Brackets shall be made from 2mm thick CRCA steel. Pedestals with legs -

Nova pedestal flat metal front, free standing central locking of size 390 mm w x 435 mm d x 646 mm height 3dr =

2box+1file. The work shall be carried out as per the instructions and guidance received from engineer incharge.

TA-7 Workstation 900 x 600 (without pedestal) no.s 8 43784.24 350273.9291

Worktop shall be Made of 36mm thick MDF one side prelaminate board with 0.4mm PVC membrane pressed on to top

and having chamfered edge. Plastic ABS access flap is provided for easy access to wires and cables. Work top is available

as per layout. The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and

approved shade Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for

connecting panels together. Modesty panel shall be made of 18mm Thick Pre-laminated twin board of E1-P2 grade Edge

banded with matching 2 mm thick PVC lipping. An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy

polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for Standard Anchor Roma 4

Conference module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat. The

Table (per seat) table is equipped with Extron cables cubbies along with cable retractors as standard offering only for 1800mm head

module, 2350mm head module, 150° head module and 165° head module. For straight two seater and single seater

modules, provision to mount AV cables is provided (eg. HDMI,VGAA, etc). Only Corner 90°, 30° corner and 50° corner

modules have provision for wire flow between adjacent tables. Additional Wirecover made of 0.8mm Thick CRCA,

provided below worktop to conceal Microphone wires running from table top to wire tray.

The overall size of the table shall be 2400 x 1150 x 750mm. Worktop shall be Made of 36mm thick MDF one side

prelaminate board with 0.4mm PVC membrane pressed on to top and having chamfered edge. Plastic ABS access flap is

provided for easy access to wires and cables. Work top is available as per layout. The Under-structure consists of mixture

of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade Edge banded with matching 2 mm thick

PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty panel shall be made of

Meeting Table 18mm Thick Pre-laminated twin board of E1-P2 grade Edge banded with matching 2 mm thick PVC lipping. Powder

TA-9 3000mm x coated accent metal strip provided below work surface to enhance aesthetics. It is made of 0.8mm CRCA as per IS no.s 2 49704.18 99408.36963

1150mm 8 pax 513,epoxy polyester powder coated. An array of panels made of 0.8mm CRCA MS IS:513, epoxy polyester powder coated

(DFT 40-60 microns) is used for flow of wires and cables. Provision to mount Anchor Roma 6 module plate is provided

below worktop. Cutout on top with two piece injection moulded plastic part polymer component is fitted to pullout

audio,video cables onto worktop and connect devices charger to power socket below worktop.

Providing and Palcing in place of canteen table. The overall dimensions of the tbale shall be 1650 x 750 x 750mm. Tablr top

shall be made from 25mm thick MDF OSR board with membrane coating on top side. Legs are made by welding the

combination of MS ERW round tube of dimater 63.5mm x 2mm thick. Flamges of 1.6mm thick CRCA and 1.2mm thick.

Insde platew are made from HR 5mm thick sheet. Assembly is epoxy polyester powder coated. Table top folds upside at

offset center pivot provided on support bracket which is Aluminium alloy pressure die cast part coated with epoxy olyester

TA-10 Cafeteria Table powder caoted min. 40 microns. Table top connected with spring loaded mechanism with pull handle made of snadwich no.s 6 20419.30 122515.8223

tubes of MS ERW 1.2mm thick and 1.6mm thick tubes. Coated with epoxy polyester powder coated min. 40 microns. Legs

are provided with casters of 65mm diameter loackable type for ease of movement and can be locked when required at any

Providing in place of main table with overall size of table equal to 1200 x 600 x750mm. The table is made of 25 mm thick

Prelaminated Twin Board of E1-P2 grade edge banded with matching 2mm thick PVC lipping. Grommet provided on work

surface for wire manaement. The modesty panel is made of 25 mm thick Prelaminated Twin Board of E1-P2 grade. The

Guardian / MFP understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with

TA-13 matching 2 mm thick PVC lipping. The HInge door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade no.s 1 11670.04 11670.03565

and approved shade edge banded with matching 2 mm thick PVC lipping. Handles are provided for ease of opening.

Pedestals are provided with lock for security.

Grand Total 4896822.157

Grand Total 4896822.157

S.NO ROOM Specifications QUANTITY PRICE AMOUNT

The seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed moulded reconstituted wood & upholstered with leather and

moulded polyurethane foam. Size of back shall be (W)-46.0cm, (H)-57.0cm & size of seat shall be (W)-49.0cm x (D)-

49.5cm. High Resilience (HR) foam should be used in making seat & back which shall be moulded with density 45 +/- 2

kg/m ³ and hardness load 16+/- 2 kgf as per IS: 7888 for 25% compression. The back rest should be connected to the

mechanism with a drop-lift mechanism which can be adjusted in the range of 7.0+/-0.5cm for the comfortable back support

to suitable individual need. Armrests should be pressure die casted in polished aluminium with PP arm tops. The

mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:3, Synchronized tilt,

C1 CMD Back tilt with 4 position locking and Side tilt tension adjustment knob should be operated while taking back support for 1 46836.56 46836.55856

better adjustment of comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0

+/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The

size of head rest shall be (W)26.0cm x 12.0cm(L). The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0

+/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. Overall dimensions of

Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground -

min 113.5 to max 138.0 cms. Seat height - min 41.0cm to max 51.0 cm. Dimensions tolerance / variations shall be within

Providing and Placing Visitors Chair with overall size of 60.9 W m x 64.2 D cm x 98.2 H cm x 44.8 Seat Height cm. The

seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is upholstered with leatherette and

molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of 16±2 kgf as per IS:7888 for 25%

compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of PU foam with insitu molded M.S. ERW

round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette. The back size is 47.7 W cm x 76.4 D cm.

C1.1 VISITORS The tubular frame is cantilever type and made of Ø2.54±0.03cm x 0.2±0.016 cm thick SS 202 tube. The back connected to 3 13134.93 39404.7943

frame through chrome plated high pressure die casted connector pipe.

The seat is made up of 1.4 cm thick hot pressed plywood moulded polyurethane foam and upholstered fabric. It shall be

48cm x 49cm. The two part Back assembly is upholstered with mesh fabric. It is made up of back outer injection moulded

in glass filled Polyamide and back inner injection moulded in glass filled Polypropylene. The back consist of adjustable

lumber support having and adjustment of 4cm. It is made up of Poluoxymethylene which is upholstered with foam and

fabric. Back size shall be 47cm x 53cm. Two way adjustable armrests are made of glass filled Polyamide with PVC armtop

having a height adjustment of 8cm along with to and fro movements. IT shall have tilt mechanism, 360 degree revolving

type, tilt tension adjustment, 3 position lock. The class 3 pneumatic height adjustment has stroke of 10cm. The pedestal is

C2 HOD+DIRECTO injection moulded in glass filled Polyamide and fitted with 5 nos. of twin wheel castors. The pedestal is 64cm PCD. Twin 4 15992.53 63970.12409

wheel castors shall be injection moulded in Polyamide having 6cm wheel diameter. Headrest- The headrest has an

adjustment stroke of 6cm and can be retrofitted to the chair. The overall dimensions of the chair shall be 73cm W x 73cm

D x 111- 126cm H. The seat height shall be 42-52cm H.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon

& upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is

moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an

up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot

synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension

adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of

C3 Senior manager polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be 4 9665.71 38662.82108

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm

in height. The must be greenguard certified. the work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. This shall come along a headrest from same family. It shall be SCS IAQ certified for Indoor Air

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon

& upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is

moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an

up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot

Juinior manager synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension

+PA adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of

polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm

in height. The must be greenguard certified. the work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. This shall come along a headrest from same family. It shall be SCS IAQ certified for Indoor Air

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon

& upholstered using net fabric with high tenacity yarn. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is

moulded with density =55+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an

up=Down adjustment of 8.5 ± 0.5cm which is provided in armrest structure. Armrest top has an integrated layer of

thermoplastic elastomer. Armrest is made up of plastic injection moulded nylon with textured top. It shall have Front pivot

C5 synchro mechanism with following features. 360 degree revolving type, Single point control, front fivot tilt, tilt tension 46 8842.52 406755.7385

adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The lumber support consists of

polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height of lumber pad can be

adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an adjustment of 8.0± 0.5 cm

in height. The must be greenguard certified. the work shall be carried out as per guidance and instructions recieved from

Engineer Incharge. It shall be SCS IAQ certified for Indoor Air Quality.

The seat is made up of 1.2± 0.1cm thk. Hot pressed plywood. The back is made up of injection moulded glass filled nylon

& upholstered using Quilted knitted fabric. Seat Size:- 47cm(w) × 51.5cm (D). The HR polyurathene foam is moulded with

density =45+/-2 kg/m cube and hardness 16± 2 kgf as per is:7888 for 25% compression. The armrest has an up=Down

adjustment of 8.0 ± 0.5cm which is provided in armrest structure. Armrest structure is chrome plated and fitted with an

armrest top. It shall have Front pivot synchro mechanism with following features. 360 degree revolving type, Single point

control, front fivot tilt, tilt tension adjustment, 4 position locking with anti- shock feature, seat/back tilting ration of 1:2. The

lumber support consists of polypropylene pad with mouled polyurathene foam & covered with polyester fabric. The height

C6 of lumber pad can be adjusted through two projecting knobs provided on the rear side of the pad. Lumber pad has an 37 10937.09 404672.1975

adjustment of 8.0± 0.5 cm in height. The pneumatic height adjustment has an adjustment stroke of 10cm. The pedestal is

fabricated from 0.2cm thick HR sheet chrome plated and assembled with injection moulded moulded black polypropylene

hub cap. the work shall be carried out as per guidance and instructions recieved from Engineer Incharge.

The seat and Back are made up of injection moulded high impact strength PolyPropylene polymer compound with indoor

grade UV resistance. Seat size shall be 52.5cm x 53.2cm. Back size shall be 51.6cm x 40.5cm. The tubular welded frame is

made of dia. 2.22cm x 0.12cm and 3.5cm x 1.5cm x 0.12cm stainless steel 202 grade tube. The rubes are buff polished to

give shiny finish. The shoes and Amrest are made of high impacy strength PolyPropylene polyemr compound with indoor

C7 Café chair grade UV resistance and pressed and press fitted with tubular frame. The overall dimensions of the chair shall be 52.4cm x 26 3328.85 86550.17416

55.8cm x 84.5cm. The seating height shall be 45.0cm.

The cushioned seat and back assembly consists of seat base moulded in glass filled Poly-amide, moulded polyurethane

foam and upholstered with high stretch knitted polyester fabric. The back size shall be 45.5cm W x 53.0cm H. The HR

polyurethane foam used in seat and back cushion is moulded in density 45kg per m3. The seat and back are firmly

connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just

RECEPTION+W with a simple lean on the sides or back, without need for complex manual adjusments. The cantilevered seat offers impact

ORKSTATION+ cushioning while seating and synchronises with the back movement during posture changes. The ‘S: shaped spines moulded

C8 GUARD in high strength glass filled Polyamide and the spine connector moulded in glass filled Polyamide form the back spine 46 10126.93 465838.866

+PEONS+AUDI structure involved in multi dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position

TOR ROOM Tilt limiter feature which is inbuilt in saet base and the tension is user weight dependent. The adjustable armrests assembly

consists of armrest housing sliding over the armrest structure, both moulded in glass filled Polyamide. The pneumatic height

adjustment shall have a stroke of 9.2cm.The pedestal is injection moulded in glass filled Polyamide and fitted with 5 nos.

twin wheel castors. The pedestal is 66cm pitch centre diameter and 76cm with castors. The overall dimensions of the chair

shall be 76cmx 76cm x(99.5-108.8cm). The seat height shall be (44.5-53.8cm).

Snos. Location Specifications Qty Price Amount Ref. Image

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The

seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with

Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made

of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which

also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface

defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It

should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The

seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with

Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made

of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

GM / HOD upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which

2 Room Sofa 2 also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface 11 26378.15 290159.6594

seater defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It

should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat

should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with

Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made

of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr,

upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which

3 Sofa 1 seater also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface 11 20238.82 222627.0612

defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It

should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

4 Centre Table understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall 9 10253.27 92279.41066

dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with

5 Side Table understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall 12 6813.12 81757.42818

dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

Snos. Location Specifications Qty Price Amount

It consists of storage units 457 mm deep– fixed or movable – bolted to Undercarriage which rolls onto the channels, which,

are firmly fixed to the ground. Each of above configurations can have following type of blocks – 1. Single Static (SS) 2.

Single Last (SL) 3. Twin Mobile(TM) – 2 body back to back. Construction shall be made out of 0.8 thk. CRCA Steel

conforming to IS: 513 Gr.D. Each body block (SS/SL/TM) building consists of 1 Main unit & then Add-on units (0, 1, 2, 3,

4 - depending on no. of bays 1, 2, 3, 4 & 5). Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units

are bolted to undercarriage. Optimizer Height from ground is 2080 mm (1980 body + 65 under-structure + 35 channel

system). Width shall be 915mm. The bodies including shelves are given anti-rust surface treatment & are powder coated

with epoxy polyester powder. Final finishing is done by a Dry Film Thickness of minimum 45 (+\- 5) microns. Shelves are

having 10 bends & its max load bearing capacity is 80 Kg uniformly distributed per shelf. The Undercarriage is a welded

frame made of HR sheet 2 & 3.15 mm thk conforming to IS:1079 suitably fabricated to take the loads based on

1 Optimisers configuration. The movement of units is achieved mechanically through a PU Drive wheel and 'Sprocket-Chain-Tensioner' 30 28475.73 854271.8765

arrangement mounted rigidly onto body side. The torque from hand wheel is transfer to drive shaft via sprocket chain

arrangement. , each movable undercarriage is provided with 3 rollers on the shaft for driving, 3 anti-friction ball bearings for

rolling and 4 anti-friction ball bearings for guiding between rails. A Centralized locking arrangement is provided through

Locking Stiffener mounted onto back of Single Last unit so that it gets locked on channels when all the units are brought

together. The nuts & bolts are galvanized / blackodized / Zn Plated. It consists of 'J' section 2 mm thk HR sheet & 25 mm

Square bright bar - both connected by screws. The movement of units is achieved mechanically through a PU Drive wheel

and 'Sprocket-Chain-Tensioner' arrangement mounted rigidly onto body side. The torque from hand wheel is transfer to

drive shaft via sprocket chain arrangement.

Providing and placing ALL WOOD HINGED DOOR UNIT (HDU) Size:- 900 (W) X 695 (H) X 450 (D). Construction &

Material Knockdown construction. Door Opening Twin door with self closing hinges of Wood made from18mm Thick Pre

Laminated Board. Handle · Aesthetically appealing recessed plastic handle for& wooden Doors. Locking Mechanism Cam

lock · 3 point locking mechanism in Wood Door Shelving· Wooden Top shall be be made from Pre-Laminated Board of 25

mm thk. Skirting of 125 mm High shall be provided. Leveler Screw type adjustable Leveler with plastic base. height. Back

Panel and Sides of the storageunits will be made out from 18mm thick Pre-Laminated Particle Board. Note: All partitions

2 Storage and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 10mm of uneven flooring. 19 13962.13 265280.495

The work shall be carried out as per guidance and instructions received from engineer incharge.

Grand Total 1119552.372

Grand Total 1119552.372

Snos. Location Specifications Qty. Price Amount Ref. Image

SITC of overhead storage space of unit of length, width 600mm and depth 450mm composed of 18mm thick ply with 1mm

laminated sheet cold pressed using adhesive (both as approved by the architect) with pre-approved hinges and handle.

F2 RECEPTION TABLE-The work shall be carried out as per guidance and instructions received from engineer incharge. 1 97826.09 97826.08696

Grand Total 8699556.523

Grand Total 8699556.523

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

3 SUB-HEAD (A) : INTERNAL WIRING

1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed medium class PVC conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

2 Wiring for group controlled (looped) light point/fan point/exhaust fan point/

call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC

1.55 insulated copper conductor single core cable in surface/ recessed PVC

conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc. as required.

3 Wiring for circuit/ submain wiring along with earth wire with the following

1.14 sizes of FRLS PVC insulated copper conductor, single core cable in surface/

8 recessed medium class PVC conduit as required

11 3.3 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 150 249 37,350

12 3.4 1.14.9 4 x 6 sq.mm + 2 x 6 sq.mm. earth wire Metre 170 394 66,980

13 3.5 1.14.10 4 x 10 sq.mm + 2 x 6 sq.mm. earth wire Metre 40 543 21,720

4 Supplying and fixing following modular switch/ socket on the existing

1.24 modular plate & switch box including connections but excluding modular

15 plate etc. as required.

18 4.3 1.24.4 3 pin 5/6 amp socket outlet EACH 235 111.00 26085.00

19 4.4 1.24.5 6 pin 15/16 amp socket outlet EACH 41 175.00 7175.00

20 4.5 1.24.6 Telephone socket outlet EACH 130 119.00 15470.00

21 4.6 1.24.7 TV socket outlet EACH 20 119.00 2380.00

5 Supplying and fixing modular blanking plate on the existing modular plate &

1.26 switch box excluding modular plate as required. EACH 33 32.00 1056.00

6 Supplying and fixing following size/module, GI box along with Modular

1.27 base & cover plate on existing modular metal boxes etc. as required.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

7 Installation ,Testing, Commissioning of wall bracket /ceiling

fittings of all sizes and shapes containing upto two GLS/CFL/LED

1.35 lamps per fitting, complete with all accessories including EACH 300 98.00 29400.00

31 connections etc. as required.

8 Installation of exhaust fan in the existing opening, including

making good the damage, connection, testing, commissioning

32 1.50 etc. as required.

9 Extra for fixing the louvers/ shutters complete with frame for a

34 1.51 exhaust fan of all sizes. 168 504

10 Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet,

with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve,

SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal

cover for the socket out let and complete with connections, testing and

commissioning etc. as required.

11 Supplying and fixing DP sheet steel enclosure on surface/ recess along with

25/32amps 240 volts “C” curve DP MCB complete with connections, testing

and commissioning etc. as required.

12 Providing and fixing of 3 No.13 amp modular type 3 pin international socket

and , cover plate, 5 sided G.I. Boxes for housing switches and sockets and

37 MR-1 earthing complete as required (under the table ) Each 59 468 27,595

13 Laying of one number PVC insulated and PVC sheathed / XLPE

power cable of 1.1 KV grade of following size direct in ground

including excavation, sand cushioning, protective covering and

38 refilling the trench etc as required.

40 7.1.2 Above 35 sq. mm and upto 95 sq. mm m 100 338 33,800

14 Providing and fixing of 1 No.13 amp modular type 3 pin international live

socket, cover plate, 5 sided G.I. Boxes for housing switches and sockets and

earthing complete as required ( on the table)

15 Providing and fixing of 1 No. 16 amps switch with indicator, cover plate, 5

sided G.I. Boxes for housing switches and sockets and earthing complete as

43 MR-3 required ( on the table ) Set 20 288 5,756

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

16 Supplying and fixing of following sizes of medium class PVC conduit along

1.21 with accessories in surface/recess including cutting the wall and making good

46 the same in case of recessed conduit as required.

47 16.1 1.21.2 25mm dia PVC conduit Metre 1,500 90 135,000

48 16.2 1.21.3 32mm dia PVC conduit Metre 600 92 55,200

50 SUB-HEAD (B) : FANS & LIGHT FIXTURES:

Supplying, fixing, connecting, testing and commissioning of 1x36-45 watt

LED light fixture suitable for 600x600 ceiling with electronic ballast, with

1 MR integral ballast, profiled diffuser, grey colored body , suitable mounts,

suspension cables complete as required, IP 40 rated, CRCA/ Aluminium

Supplying, fixing, connecting, testing and commissioning of surface/ recessed

type LED Linear light with high efficiency white reflector and high

transmissive diffuser ,fitting complete with, holder, electronic driver, heat

2 MR sink and LED (less than 10% THD), low depth with die cast aluminium

housing 1 x 30-40W LED with CRI >70, including with driver connections

53 etc. as required . Each 4 6,145 24,580

Supplying, fixing, connecting, testing and commissioning of surface/recessed

type LED down-lighter with high efficiency white reflector and high

3 MR transmissive diffuser ,fitting complete with, holder, driver, heat sink and

LED (less than 10% THD), low depth with die cast aluminium housing 1 x

54 20W LED with CRI >70, including with driver connections etc. as required. Each 54 2,432 131,332

Supplying, fixing, connecting, testing and commissioning of surface/recessed

type LED down-lighter with high efficiency white reflector and high

4 MR transmissive diffuser ,fitting complete with, holder, driver, heat sink and

LED (less than 10% THD), low depth with die cast aluminium housing 1 x

55 12W LED with CRI >70, including with driver connections etc. as required. Each 110 1,266 139,305

Supplying, fixing, connecting, testing and commissioning of mirror light

5 MR luminaire with 1 x 10-14 watt complete with electronic ballast, lamp

56 including connection etc. complete as required. Each 6 504 3,022

Supplying, fixing, connecting, testing and commissioning of LED flexible

strip cove light for white color including all drivers, connecting cables,

6 MR controllers , non dimmable, average 5-6 watt / metre. Color as per instruction

57 complete as required Meter 410 541 221,851

59 SUBHEAD (C) : M.V. PANELS/ DISTRIBUTION BOARD

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supplying and fixing following way prewired vertical type TP&N MCB

distribution board of steel sheet for 415 volts on surface/ recess complete with

loose wire box of sheet steel, dust protected, duly powder painted, inclusive

of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar

for mounting MCB's, terminal connectors for all incoming and outgoing

1 2.5 circuits, duly prewired with adequate size of FR PVC insulated copper

conductor upto the terminal connector/ neutral link, earthing etc as required

(But without MCB/ RCCB/ Isolator). (Note : Prewired vertical type MCB

TPDB is normally used where 3 phase outlets are required.)

Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

2 2.15 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing and commissioning etc.

65 as required.

Supplying, installation, testing and commissioning of cubical type MV

Panel as per IEC:61439-I made out of 14 SWG sheet steel, totally enclosed

IP-54 protection, free standing, floor mounted dust and vermin proof, indoor

type compartmentalized powder coated of approved shade after antirust

treatment (with min seven tanks ) suitable with busbar interconnection with

suitable size of copper lead/solid Aluminium strips, control circuits & bottom

4 MR-14 base channel of MS section not less than 100mmx50mmx5mm (thick),

Fabrication shall be done in transportable section ,entire panel shall have a

common earth busbar at rear with 2 nos earth stud cable alleys, cable gland

plates in two half as required as per single line diagram & specification

enclosed with the following switchgears.(Floor Panel )

72 1 Nos.125 Amps. TPN MCCB (35 KA) with electronic releases.

73 1 Set phase indication lights (R, Y, B)

74 1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

75 1 No. 0-125 Amp. Ammeter (digital type) with inbuilt ASS

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

77 400 Amps. TP&N aluminium bus bars (35 KA)

78 OUT GOINGS:-

79 2 Nos. 63A 4PN, MCCB

Supplying, installation, testing and commissioning of cubical type MV

Panel as per IEC:61439-I made out of 14 SWG sheet steel, totally enclosed

IP-54 protection, free standing, floor mounted dust and vermin proof, indoor

type compartmentalized powder coated of approved shade after antirust

treatment (with min seven tanks ) suitable with busbar interconnection with

suitable size of copper lead/solid Aluminium strips, control circuits & bottom

5 MR-15 base channel of MS section not less than 100mmx50mmx5mm (thick),

Fabrication shall be done in transportable section ,entire panel shall have a

common earth busbar at rear with 2 nos earth stud cable alleys, cable gland

plates in two half as required as per single line diagram & specification

enclosed with the following switchgears. (Main UPS Panel )

84 1 Nos.63Amps. FP MCCB (25 KA) with electronic releases.

85 1 Set phase indication lights (R, Y, B)

86 1 No. Volt Meter (digital type) with inbuilt VSS & control fuses.

87 1 No. 0-63 Amp. Ammeter (digital type) with inbuilt ASS

89 200 Amps. TP&N aluminium bus bars (35 KA)

90 OUT GOINGS:-

94 SUB-HEAD (D) : L.T. CABLES

Supply, laying and testing of under noted sizes of Aluminium conductor

XLPE insulated PVC sheathed & sleeved armoured and overall PVC sleeved

1.1 KV grade power distribution cables conforming to relevant IS code and

1 as per specification in ground (including trenches) through pipe or on wall /

racks cable trays including dressing and clamping the cable with MS zinc

96 passivated clamps etc. as required.

Supplying and making end termination with brass compression gland and

2 9.1 aluminium lugs for following size of PVC insulated and PVC sheathed /

101 XLPE aluminium conductor cable of 1.1 KV grade as required.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supplying and installing following size of perforated pre-painted M.S. cable

trays with perforation not more than 17.5%, in convenient sections, joined

3 4.1 with connectors, suspended from the ceiling with M.S. suspenders including

bolts & nuts, painting suspenders etc as required.

109 a) 4.1.2 150 mm width X 50 mm depth X 1.6 mm thickness Metre 100 531 53,100

110 a) 4.1.4 300 mm width X 50 mm depth X 1.6 mm thickness Metre 100 621 62,100

112 RACEWAYS AND CABLE TRAYS

supplying installation, installation on ceiling/ surface 1.6 mm thick M.S.

powder coated raceways of height 50 mm and 2.0 mm thick openable

cover, totally enclosed, the joints between two lengths of channels or between

4 MR channel and junction box shall be joined together with 3 mm thick M.S.

Powder coated coupler plates to make it dust and water proof. The cost shall

including all supporting and fixing accessories including dash fasteners. (

Orange colour for data and Blue colour for power)

116 a. MR-20 250-300 mm (wide) x 45-70mm (height) 3 compartment Metre 100 1,258 125,777

117 b. MR-21 150-200 mm (wide) x 45-70 mm (height) 3 compartment Metre 175 843 147,580

5 supplying installation, Junction boxes for raceways made from 2 mm thick ,

with 2.5 mm thick G.I. cover including providing neoprene gaskets

between the cover and the junction box, cadmium plated flat/round head

screws, height as per site condition,totally enclosed. Proper cutouts shall be

made in the side walls for raceway entry wherever required. The junction

box shall be all side walls should be welded expect top cover and all side

walls shall have suitable size of rectangular knock out holes for taking

raceways / conduits as required and not a complete cut out. The top cover

should be sealed with M Seal to make it dust and water proof complete as

122 GI FLOOR JB

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

128 SUB-HEAD (E) : EARTHING

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including

accessories, and providing masonry enclosure with cover plate having

1 5.4 locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/

131 coke and salt as required. Set 3 6,216 18,648

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including

accessories, and providing masonry enclosure with cover plate having

2 5.6 locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/

133 coke and salt as required. Set 1 11,794 11,794

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below

ground as strip earth electrode, including connection/ terminating with nut,

3 5.8 bolt, spring, washer etc. as required. (Jointing shall be done by overlapping

and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground

as strip earth electrode, including connection/ terminating with G.I. nut, bolt,

spring, washer etc. as required. (Jointing shall be done by overlapping and

with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe

5 5.10 from earth electrode including connection with brass nut, bolt, spring, washer

139 excavation and re-filling etc. as required. Metre 10 1,224 12,240

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from

6 5.11 earth electrode including connection with G.I. nut, bolt, spring, washer

141 excavation and re-filling etc. as required. Metre 5 483 2,415

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

143 earthing as required. Metre 300 57 17,100

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for

145 connections etc. as required. Metre 200 1,009 201,800

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for

147 connections etc. as required. Metre 200 206 41,200

149 SUB HEAD (H) : UPS SYSTEM

Supplying, installation, testing and commissioning of (N+1) 30 kVA/27KW

online double conversion fully microprocessor based ,indoor type, compact

UPS system of mentioned rating with designed output PF .9 at 40 degree

and IGBT based PWM technology to achieve THD < 5% and input

power factor of greater than 0.95 at 50% loading, Efficiency >= 93% at

MR 50 % load, suitable for three phase AC input voltage 320 V to 480 V, 50 Set 2 662,777 1,325,554

Hz +3% / - 3 % and three phase AC output voltage 415 ± 1% volts &

frequency 50 ± 0.5 Hz with all components as mentioned in BOQ,

specifications and schedule, complete as required and as per technical

specification. Each unit shall be comprising of the following: Total 2 no.s (In

125% rated Rectifier cum charger unit +100% rated Invertor, Integrated in

152 UPS module

100% rated Inbuilt static switch at the invertor output + 2 Nos. 100% rated

153 Inbuilt static switches at the static bypass line.

154 c 100% rated Inbuilt Maintenance Bypass.

Web-enabled Monitoring and Management through SNMP protocols for

155 multi-OS environments.

Inbuilt feature required for input phase seq protection and automatic

e change. UPS should work on mains and should not go to battery mode in

156 case of input phase sequence change

Supplying, unloading, installing testing and commissioning of necessary

VRLA batteries of suitable size having 15 minutes back up time to 30KVA

UPS for full load (75Ah Batteries X 20 No.) to be provided. 1 No spare

batteryof same AH to be provided and cost to be added. Total VAH =

Note : Concerning vendor needs to furnish the battery sizing

calculations at the time of GA approval and battery size has to be as per

157 the approved GA drawing.

Supply, unloading, installation testing & commissioning of matching

cabinet/open racks to house above mentioned batteries for 30 KVA UPS

system along with suitable size interconnecting cable (for UPS to Battery and

battery to battery), MCCB etc. complete as required & as per specifications.

Supply,installation testing and commissioning of UPS monitoring software

h suitable for RJ-45 communication and capable of giving pop up messages for

159 all alarms received from UPS. All shall be capable of the following:-

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Giving notifications like e-mail, paging notification, broadcast notification,

160 battery replacement notification, run event-based scripts.

Event logging, data logging and action logging (with date, time,

161 description of fault and event).

162 k Run the battery diagnostic test.

163 l Automated unattended shutdown of computers.

164 m Local notification through audible alarm.

Software should support :

n latest version of Microsoft Windows/ Server, AIX, HP-UX, Sun Solaris,

165 Linux, Novell Netware, MAC

168 FIRE ALARM & DETECTION & PA SYSTEM

Supplying, installation, testing & commissioning of repeater panel wih 640

1 MR character/ Touch screen LCD display with inbuilt reset, acknowledge and Each 1 108814 108814

170 silence switches complete as required.

171 MR SITC Loop Card capacity of 159 detectors For BMS Fire integration Each 1 80451 80451

172 MR SITC of Networking card for BMS integration Each 1 50751 50751

Supplying, installation, testing & commissioning of intelligent

2 17.2.4 analog addressable photothermal detector complete with Each 48 2846 136608

173 mounting base complete as required.

Supplying, installation, testing & commissioning of response

3 17.2.5 indicator on surface/recessed MS Box having two LED, Each 48 263 12624

174 metallic cover complete with all connections etc as required

Supplying, installation, testing & commisssioning of

4 17.2.6 intelligent addressable programmable sounder complete as Each 2 2638 5276

Supplying, installation, testing & commissioning of fault

176 isolator complete with base as required.

Supplying, installation, testing & commissioning of intelligent addressable

6 17.2.9 thermal detector with rate of rise cum fixed tempreature thermistor complete Each 3 2713 8139

178 with base as required.

Supplying, installation, testing & commissioning of

180 addressable fire control module complete as required

Supplying, installation, testing & commissioning of intelligent

8 17.2.13 addressable duct detector including suitable Photo detector Each 6 7801 46806

182 complete with base as required.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supplying, installation, testing & commissioning of addressable manual call

184 point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum

10 17.2.15 strobe complete as required. Each 2 3494 6988

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having

11 17.5.2 XLPE insulation, steel wire armouring & FRLS outer sheath Metre 1200 141 169200

187 complete as required.

189 17.3 PUBLIC ADDRESS SYSTEM

Supplying, installation, testing & commissioning of 6 zone,

voice alarm controller with USB, MP3 player (including 6 zone

1 17.3.1 button paging station) with seamless integration facility with Each 1 126399 126399

main fire alarm panel for voice evacuation complete as

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker

192 complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box

194 ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of

4 17.3.4 ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS Each 8 2416 19328

195 enclosure complete as required.

Supplying, installation, testing & commissioning of digital

5 17.3.6 audio amplifier 500 Watt, 25V rms operating at 240 volt AC Each 1 96767 96767

196 supply complete as required.

Supplying, installation, testing & commissioning of Voice

6 17.3.9 command keypad 6 zone, with microphone assembly Each 1 81743 81743

198 complete as required.

199 17.5 Cabling & Wiring

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed

7 17.5.3 steel conduit of following pairs, cores and size including

200 connections and interconnections etc. as required.

201 7.1 17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm Metre 750 51 38250

203 SURVEILLANCE SYSTEM (CCTV)

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, Installation & commissioning of Reliable & Secure 5MP Dome

Camera with minimum IR distance 40 mtrs or better .1/2.7” Progressive

Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , simultaneosus

quad H.265+ streams ,min illumination : 0.01 Lux @ color, 0 Lux with IR

@ B/W , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , SD card

support upto 256 GB , Alarm trigger - 1 input / 1 output , frame rate : Main

1 MR stream should support 25 fps@5MP ,Edge analytics : line crossing , Nos. 11 45345 498795

perimeter intrusion ,Face detection with deep learning , pedestrian detection

,cross counting , stationary object , In built IR LED with IR Distance upto 50

meters or better , IP 67 weather proof and IK 10 vandal resistant housing ,

POE.ONVIF profile S , G & T, UL,CE,FCC certified

Supply, Installation & commissioning of Reliable & Secure 5 MP PTZ

camera 1/2.8" CMOS progressive sensor, 5MP (2592 X 1944), with min

IR distance 150 mtrs or better , Min illumination : Color 0.5lux @

2 MR F1.2(AGC ON) ; B/W 0.05 lux, WDR 120db or higher, Shutter time : 1/1 ̴ Nos. 1 225000 225000

1/10,000 s, , fixed focal lens 4.3-129 mm , Min 30X Optical & 12X Digital

zoom, Privacy mask 04, IP 66 , POE ,ONVIF profile S/ G/ Q .

206 UL,CE,FCC certified

Supplying, Installation, Testing & Commissioning of Reliable & Secure 32

channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output

interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1

X RJ45 ethernet , iOS smartphone support , 8 HDD support , each HDD slot

support upto 8 TB HDD , RAID support , 1x3.0 USB for backup /upgrade ,

2x 2.0 USB for mouse , Artificial Intelligence Support having face

3 MR recognition with compatible deep learning supported cameras, AI-Face Nos. 1 210000 210000

registered quantity upto 10,000 ,A.I maximum captured quantity 200,000.

UL,CE,FCC certified. OEM Should not be blacklisted globally. The

contractor need to ensure that NVR should be supplied with all required

accessories to make CCTV System in functional state. .

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supplying, Installation , Testing & Commissioning of 43 inch 4K LED

display, Landscape & Orientation Resolution 3840X 2160 (16.9) UHD.

Brightness 350 NIT, Built in Wi-Fi and Bluetooth inbuilt digital signange

player, Android Builtin Memory 16 GB, Processor Cortex A55x4 1.1 Ghz

Processor Triple Core Mali 470 600 MHz 16 GB Memory24/7 operation,

4 MR Brightness 350 nits, Contrast Ratio 1100:1, 178/178 Viewing Angle Nos. 1 54934 54934

(Horizontal:Vertical), 8ms Response Time (milli seconds) Built in speaker

(10W+10W). Inputs DVI-D, Display Port, HDMI & Dual USB Plug & Play

, RJ45 LAN, Output Stereo mini Jack, Remote

Controlling of device Display remotely controlled Internal/External, BIS

Certificates etc. complete in all respect etc.as required

Supplying, Installation & testing of Hard Disk 8TB SATA Surveillance Hard

Disk (HDD) in NVR Complete in all respect.

213 6 MR SITC of 360 degree Joy Stick Nos. 1 65001 65001

215 SUB HEAD - IV : TV, DATA, VOICE NETWORKING

217 Passive Components

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing

219 surface/ recessed Steel/ PVC conduit as required.

Supply, installation, testing & commissioning , Cat 6A STP Jack PCB based

Information Outlet (I/O) RJ45, TIA‐568.2-D Category‐6A. ETL Channel

test report as per ISO/IEC 11801, ANSI/TIA 568.2-D High‐impact,

2 MR flame‐retardant,UL 94V-2 for plastic part – ABS, Plug Insertion Life Min. Nos. 200 270 54067

750 times as per IEC 60603‐7 Zinc Alloy housing, Pin in Jack Material - 50

U Gold over Nickel, Insulation Resistance - 100 M ohm, Contact Resistance

222 – 20m ohm, Current rating - 1.5A Max

Supply, installation, testing & commissioning Cat 6A STP, 24‐port loaded

Modular Straight Jack Panel for 24 nos. STP ports patch panel is eight ports

RJ45 modules applied and suitable for 22-24 AWG stranded and solid wire,

3 MR compatible with 110 & Krone punch down tools. Jack Panel should be tested Nos. 10 5593 55933

under ETL 4 Connector channel Test report, RoHS Compliance,Insulation

Resistance 100 M ohm Max Contact Resistance 20m ohm

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, installation, testing & commissioning Cat-6A S/FTP Low Smoke

Zero halogen (LSZH) Patch Cord (Length – 1 Mtrs) Cat 6A S/FTP Patch

Cable, TIA‐ 568C Category‐6A, ETL Channel test

4 MR report as per ISO/IEC 11801, ANSI/TIA-568.2-D-2018 , RoHS Compliant. Nos. 200 239 47726

Patch cords shall be of Solid copper cable with ETL Listed. Plugs

226 shall be designed with Snag less Moulded Boot

Supply, installation, testing & commissioning Cat-6A S/FTP Low Smoke

Zero halogen (LSZH) Patch Cord (Length – 2 Mtrs) Cat 6A S/FTP Patch

Cable, TIA‐ 568C Category‐6A, ETL Channel test

5 MR report as per ISO/IEC 11801, ANSI/TIA-568.2-D-2018 , RoHS Compliant. Nos. 200 274 54740

Patch cords shall be of Solid copper cable with ETL Listed. Plugs

228 shall be designed with Snag less Moulded Boot

Supplying & Fixing of Floor Standing Network/Server Rack - 42U / 800w /

800d, with Heavy Duty Extruded Aluminium Frame for rigidity. Top cover

with FHU provision. Top & Bottom cover with cable entry gland plates.

Two pairs of 19” mounting angles with ‘U’ marking. Depth support

channels - 3 pairs. With a Overall Weight Carrying Capicity of 500Kgs.

6 MR Side Panels - 42U/800d Front MS Door Perforated honeycomb 42U/800w Nos. 1 45656 45656

Rear MS Door Split Perforated honeycomb 42U/800wFan 90CFM 230V

AC, 4” dia Castors with Brake (set of 4) Vertical Cable manager 80mmW

42U Shelf, Stationery 700mm N/W PDU 12Sockets 5/15Amps with MCB

Mounting Hardware (Pkt. Of 20) earthing Kit 150mmH Cable manager 1U

MS with Loops complete in all respect.

Supply, Installation, testing and commissioning of 1 U Horizontal Wire

230 Manager 60mm depth (Front Side)

Supply, Installation, testing and commissioning Patch Cord Lable for Rack

231 side (Pk of 2500 Pc.)

Supply, Installation, testing and commissioning Velcro's Roll (15 Mtr. Per

Supply, installation, testing & commissioning Single / Dual / Four Port

Faceplate of size 3x3 Material should be High‐impact, ABS, UL94-HB,

with white color, General Specifications:

10 MR Colour: White 86*86 mm for Single and Dual and 146" 86 mm, Quad Nos. 200 220 43979

Faceplate accepts four keystone jacks, Faceplates shall accept all Modules for

233 UTP, STP. RoHS Compliant.

Supply fitting, fixing and testing of 9 U Wall mount rack of Width (mm)-

600, Depth (mm) - 500, Approx.Net Wt (kg) - 20, CRCA 'D' Grade

11 MR thickness (mm) - 1.2, Powder Colour for Cabinet - RAL9002, Glass - 4mm Nos. 2 5826 11651

Toughened Tinted Glass Door, Accessories:, Fan & with all required

234 acessories.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, installation, testing & Commissioning of 8(2X4) modules brushed

12 MR brass/copper colour pop-up boxes.(Inclusive of All switch socket, Nos. 5 5865 29324

235 DATA/bnc/usb/hdmi/vga/ outlet, telephone or as required )

237 ACTIVE COMPONENTS

Supply, Installation, Testing & Commissioning of Core Switch with

switching capacity of 480 Gbps,frwarding performance of 357.12 Mpps with

20-port 10GBASE-T and 4-port 10GBASE-T/SFP+ Combo Port uplink

module from day1, dual hot swappable internal power supply, 48 K MAC

Address Table with Physical & Virtual Stacking , ERPS Support, 802.1AX .

IP Interface IPv4: 256 & IPv6: 256 , VRRPv2/v3 support , the Swithc

Should have iSCSI Awareness with Data Center Bridging (DCB) should

1 MR support DHCPv6 Guard,IPv6 RA Guard, IPv6 ND Inspection, ARP Nos. 1 344089 344089

Spoofing Prevention, DoS Attack Prevention, WAC/MAC, 802.3ah Ethernet

Link OAM, Dying Gasp, 802.1agCFM, Y.1731 OAM

DDM, RM0Nvl/v2, with Multiple Images/ Flash File System Image &

Configuration . Shouldsupport advance layer3 (RIPng,OSPF) with 3 year

support.OEM should available in Gartner Magic Quadrant for Wired and

Wireless LAN Access Infrastructure Report from latest last three consecutive

with 3 years Support/warranty

Supply, Installation, Testing & Commissioning of Firewall as per the

2 MR networking integrated configuration requirement. with 3 years Nos. 1 280030 280030

240 Support/warranty

Supply, Installation, Testing & Commissioning of Switch with at least

24X10/100/1000BASE-TPOE+Ports and2x10GBase-T and 4XSFP +Ports,

Switching capacity should be 168Gbps, Switch should support 16L3 IP

interfaces, ACL, QOS, VRRPv3,Equal-CostMulti-

Path(ECMP),UDPhelper,Policy-based Route (PBR),802.1x, Embedded 6k V

3 MR surge protection one thernet ports, Switch should have console port, RJ45 Nos. 2 121444 242887

Management Portand USBport, Should support internal/external redudent

power supply for 1+1 redundancy and load

sharing.Certification:CE,FCC,BSMI,CBandUL.OEM should available in

Gartner Magic Quadrant for Wired and Wireless LAN Access Infrastructure

Report from latest last three consecutive with 3 years Support/warranty

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply,Installation,Testing&Commissioning of Switch with at least

24X10/100/1000BASE-TPortsand2x10GBase-T and 4XSFP+Ports,

Switching capacity should be168Gbps ,Switch should support 16 L3 IP

interfaces, ACL,QOS,VRRPv3,Equal-CostMulti-

Path(ECMP),UDPhelper,Policy-based Route(PBR),802.1x,Embedded 6kV

4 MR surge protection one thernet ports, Switch should have console port, RJ45 Nos. 10 93411 934112

Management Port and USB port, Should support internal/external redudent

power supply for 1+1 redundancy and load sharing.

Certification:CE,FCC,BSMI,CBandUL. OEM should available in Gartner

Magic Quadrant for Wired and Wireless LAN Access Infrastructure Report

from latest last three consecutive year.with 3 years Support/warranty

Supply, Installation, Testing & Commissioning of Server based IPPBX

along with operarator IP Phone with 21 BLF keys

Main Unit Power Supply

Auto Attendant/IVRs

1 MR Voice Mail for all users with email faciliy Music on Hold, Speed Dial Each 1 350766 350766

Hunt Group, Call Routing And many more…

1 PRI port with recording facility 120 Analog Extensions through SIP

Based Media Gateway. System should support VM ware.with 3 years

Support/warranty

Supply Installation, Testing and Commissioning of Integrated Viocemail

2 MR System 4 Level IVR software with 6 different languages and 4 time Each 1 78344 78344

250 schedule(As per OEM).

252 3 MR Supply Installation Testing and Commissioning of IP Phone Type-I Each 10 15669 156687

254 4 MR Supply Installation, Testing and Commissioning of Digital Analog Phone. Each 110 2893 318271

256 Wi Fi SYSTEM

Supply, installation, testing & commissioning of Dual-band 802.11abgn/ac

Wireless Access Point ,4X4: • 2.4 GHz - Up to 800 Mbps 5 GHz - Up to

1733 Mbps , dual ports ,802.3af PoE support.Supports enhanced security –

WPA2-Personal & WPA2-Enterprise, WPA3 . Supports two 10/100/1000

1 MR Ethernet ports. Support LACP or Static Link Aggregation Does not include Each 6 28667 172000

power adapter or PoE injector. Should Includes Warranty and Mounting Kit

complet in all respect. complet in all respect.with 3 years Support/warranty

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, installation, testing & commissioning ofWi-Fi Controller with 4 x

10/100/1000 Mbps ports

• 2 x USB 2.0 ports, • 2 x 10/100/1000 Mbps option ports for enabling

VPN/Router/Firewall function

• 1 x 10/100/1000 Mbps console port, with 10APs license,PowerSupplyalong

with 3 year support. with licence for 12 users

262 AV room Equipments

Supply, Installation, Testing and Commissioning of 75 inch 4K LED display,

Resolution 3840X 2160 (16.9) UHD, Brightness 500 nits, Contrast Ratio

1100:1, Built in Speaker (10W+10W). Inbuilt OPS Slot Inputs HDMI IN X

1 MR 4 , DP X 1, VGA X 1, Video IN X 1,Component x 1, USB X 4, RJ45 X 1, Nos 1 190,946 190946

RS232 X 1, Audio IN X1, DP Out x 1/ DP Out x 1, Video Out x 1, Duty

Cycle 24x 7, Controlling of device Display remotely controlled,

264 Internal/External, BIS Certificates etc. complete in all respect etc.as required

Supplying, Installation , Testing & Commissioning of 55 inch 4K LED

display, Landscape & Orientation Resolution 3840X 2160 (16.9) UHD.

Brightness 350 NIT, Built in Wi-Fi and Bluetooth inbuilt digital signange

player, Android Builtin Memory 16 GB, Processor Cortex A55x4 1.1 Ghz

Processor Triple Core Mali 470 600 MHz 16 GB Memory24/7 operation,

2 MR Brightness 350 nits, Contrast Ratio 1100:1, 178/178 Viewing Angle Nos 1 78,732 78732

(Horizontal:Vertical), 8ms Response Time (milli seconds) Built in speaker

(10W+10W). Inputs DVI-D, Display Port, HDMI & Dual USB Plug & Play

, RJ45 LAN, Output Stereo mini Jack, Remote

Controlling of device Display remotely controlled Internal/External, BIS

Certificates etc. complete in all respect etc.as required

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and protected

3 1.19 with PVC sheath in the exisitng surface/recessed steel/ PVC conduit as MTR 400 33.00 13200.00

Supplying and fixing of following sizes of medium class PVC conduit along

4 1.21 with accessories in surface/recess including cutting the wall and making good

268 the same in case of recessed conduit as required.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, Installation,Testing & Commissioning of Projector 6000 Lm,

WUXGA resolution, Laser light source, 3 LCD projector with HDMI X 2,

VGA IN X 2, VGA Out x 1, Video IN X 1, Audio IN X 3, Audio Out x 1,

1 MR USB Type A X1, RS232 X 1, LAN X 1, HD Base-T X 1, 1.6X Zoom lens, Nos 1 433,561 433561

30,000,00 :1 Contrast ratio, 20,000 hours light source life along with fixed

272 zoom lens of throw ratio 1.09 - 1.77:1.

Supply, Installation,Testing & Commissioning of Motorised Lift for Projector

Supply Installation Testing & Commissioning of Motorized Projection

Screen 135 inch aspect ratio 16:10 with tublar motor & RF remote

3 MR commander, Fabric matt white. Motorised front Projection Screen, wide(8ft) Nos 1 29,735 29735

276 X hight (6ft) with 'Remote Control.

278 Video conferencing

SITC of HD Video Conference system with Omni directional Boundary

279 layer microphone with following features and items with their specifications

Multipoint (1+5) ---------------01 No.

# 1080p/60fps (Full HD)

# 10x/12x Optical Zoom PTZ Camera

# Angle of View : 72.5°

Boundary Microphone ---- 01 No.

# 4m radius, Max. 4

features : 1. Inbuilt USB Memory Recording to record live video

image and sound of local and remote sites to USB

memory without any expensive external equipment.

2. H.239 Dual Stream

3. H.281 Remote Camera Control

4. AV- QoS Technology

5. Dual Network

6. Connect up to Three Display/ Monitor

7. Expandable upto 1+9 (Need to procure License Key Extra)

282 System Should support soft client on Android, IOS and Windows Platform

Optional : (For Web/Cloud based Conferencing: it enables to use

Camera,Microphone and Display as PC Peripherals of any Web

Conference/ any cloud base applications i.e. Microsoft Teams,

Skype, Google Meet, Zoom, WebEx, Skype, blujeans etc....) …. Shall be

283 charged extra as per the requirement.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

SITC of 7 inch Touch panel, screen resolution 800 X 480, brightness

350cd/m2, contrast ratio 400:1, Ethernet Communication RJ45 port,

2 MR inbuilt speaker & mic, etc. Should be supplied with table mount as well as Nos 1 95,599 95599

wall mount kit. Should have appropriate app.complete job with SW

284 programming etc.

SITC of Touch Panel Control System should be equipped with at least 6

285 bidirectional RS-232 serial ports, at least 8 IR ports, at least 8 Digital I/O

Supply ,installation ,testing and commissioning of Output Video Encoding:

HDBaseT Class B ,Encoding Data Rate: 9.2Gbps, End to End Latency: 10 s

(micro seconds), Audio Formats: 2ch Analog/PCM | Multichannel: LPCM,

Video Resolutions (Max) Video Resolutions: 1920x1080p @60Hz 12bit /

@60Hz 8bit 4:2:0, Video Resolutions HDMI: 15m/49ft / 15m/49ft / 7m/23ft

Cat6a/7: (70m/230ft) / (70m/230ft) / (40m/131ft) / (40m/131ft) Supported

Standards: DCI | RGB Maximum Pixel Clock: HDMI: 600mHz | HDBaseT:

297MHz Communication and Control HDMI: HDMI | HDCP 2.2| EDID |

DVI/D supported with adapter (not included) HDBaseT: HDMI | HDCP 2.2 |

EDID | 1-way PoC Receiver to transmitter,RS-232: 1x RS-232: 3-pin

Phoenix (Transmitter and Receiver) Ethernet: 1x 8-pin RJ-45 female | IP

Control (TELNET) Relays: 2x Relay: 3-pin Phoenix (Receiver Only) Power

Supply: 12V DC 3A Max Power Consumption: Transmitter: 7W | Receiver:

17W PoC: IEEE 802.3af 15.4 W Max

Maximum BTU: Transmitter: 24 BTU/hr | Receiver: 58 BTU/hr complete

with standard accessories as required.

288 CONFERENCE TABLE

Supply, Installation, testing and commissioning of HDCP 2.2 compliant

HDMI 1.4v 3D compatible CEC pass through Cascadable up to 7 times One-

way PoH (Power over HDBaseT) Multichannel audio supports 7.1 DTS

5 MR Master HD and Dolby True HD Includes: Receiver, mounting brackets, IR Nos 1 138,526 138526

emitter and receiver, 2 and 3-pin phoenix male connectors Audio Format

Supported: Multichannel digital audio supporting 7.1 DTS Master HD and

289 Dolby True HD with standard accessories as per tender specifications.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, Installation, Testing and Commisioning of 6x HDMI in: 19-pin type

A,6x HDMI Out: 19-pin type A,6x Audio Out: RCA Female Stereo (L/R),6x

S/PDIF Out: RCA Female,2ch PCM | Multi Channel Up to 5.1 DTS and

Dolby Digital,1920x1080p @60Hz 12bit,Supported Standards DCI | RGB |

HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100,Communication

and Control HDMI 2.0 | HDCP 2.2 | EDID Input supports DVI/D and

6 MR DisplayPort Dual-Mode (DP++) v1.3 with adapter (not included),CEC Nos 1 167,516 167516

power triggering | Requires CEC compatibility,IR 1x Front Panel IR Sensor |

Handheld IR Remote Included | 1x IR Ext 3.5mm (1/8in) TRS Stereo,RS-

232,1x RS-232: 9-pin DB9 Female | Matrix Control | Telnet commands

supported,Ethernet 1x LAN: 8-pin RJ-45 Female | 10/100 Mbps auto-

negotiating | Built-in Web UI | IP Control, Safety and Emission CE | FCC |

Supply , installation , testing and commissioning of Digital Chairman unit

with minimumm 430mm long gooseneck microphone. Microphone connector

compatible with standard 3-pin XLR microphones. Individual adjustable gain

control. programmable bottons for Multiple functions like all delegate mute

etc. colour RGB rear LED bar for general visualisation purposes. Multi-

7 MR colour LED on the speak button for user’s colour preferences. LED display Nos 1 59,203 59203

for volume control and listening channel selection. High quality speaker for

enhanced speech intelligibility. 24-bit / 48kHz High Resolution Audio. 2 x

RJ45 Port for connecting to the Control Unit and other Discussion Units and

1 x stereo mini jack headphone output.

Supply ,installation ,testing and commissioning of Cable Management

System Cable Cubby , Black, Hydraulic open & close system, 2 x Universal

10 MR Power ,2 x RJ45 Network, 1 x VGA, 1 x 3.5mm Audio, 1 x HDMI, 1 x USB Nos 4 31,694 126777

293 Charger Sockets complete with standard accessories as required.

Supply , installation , testing and commissioning of Delegates Digital

Discussion unit with long stem gooseneck microphone with Configurable

user type unit e.g. delegate, chairman, VIP. Microphone connector

compatible with standard 3-pin XLR microphones. Individual adjustable gain

control. Multi colour RGB rear LED bar for general visualisation purposes.

11 MR Multi-colour LED on the speak button for user’s colour preferences. LED Nos 18 42,741 769337

display for volume control and listening channel selection. High quality

speaker for enhanced speech intelligibility. 24-bit / 48kHz High Resolution

Audio. 2 x RJ45 Port for connecting to the Control Unit and other

Discussion Units and 1 x stereo mini jack headphone output.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply , installation , testing and commissioning of Digital Microphone

control unit/processor for Connection of microphone units in two lines or a

ring using standard ethernet cables. Supports up to 100 discussion units

mininum. Cascade capability to handle upto 300 or more discussion units

and minumum of six interpretation units for upto 3 spoken languages in the

meeting. minimum 4 configurable balanced outputs. minimum 2 Mic/Line In

12 MR + 1 Aux In + 2 Return In. Conference Mode: Free talk, Request to talk and Nos 1 150,577 150577

Full remote. various override settings: ‘LIFO’, ‘FIFO’ and ‘Non Override’;

manual or voice activation and flexible ‘Mic On trigger mode’. Web remote

interface facilitates pre-meeting system setup and management of the live

discussion through a web browser. Built-in Wav and MP3 Recorder to

external USB memory devices, Built-in feedback suppressor and digital

audio processing (DSP).

Supply, Installation,Testing & Commissioning of Wireless Presentation

Device to be Input 4x HDMI 19-pin type A | 1x VGA 15-pin DSUB15 VGA

1x Audio In (VGA Audio) 3-pin Screw Down Phoenix Connector,output 1x

HDMI 19-pin type A | 1x Audio Out 3-pin Screw Down Phoenix Connector

1x Ethernet 8-pin RJ-45 female - 10/100/1000 Mbps auto-negotiating,Audio

Formats 2ch PCM,Output Video Encoding H.264/MPEG-4 AVC,Encoding

Data Rate 31 Mbps | Configurable,End to End Latency Low Latency Mode:

60~90ms | High Latency Mode: 250~300ms,Video Resolutions (Max)

HDMI: 1920x1080p @60Hz 16bit (7m/23ft) | VGA: 1920x1080p @60Hz

16bit (7m/23ft) Ethernet: 1920x1080p @60Hz 16bit (100m/328ft Point to

13 MR Point),HDMI HDMI 1.3 | HDCP 1.4 | DVI/D supported with adapter (not Nos 1 148,230 148230

,Ethernet 1x 8-pin RJ-45 female - 10/100/1000 Mbps auto-negotiating,RS-

232 1x RS-232 1 (Switcher Control) 3-pin Phoenix Connector | 1x RS-232 2

(Device Control) 3-pin Phoenix Connector,Hardwire Contacts 1x Contact In

5-pin Phoenix Connector | 1x LED Out 6-pin Phoenix Connector,Multiple

control methods: front panel display buttons, built in Web UI,contact closure

panels, and RS-232 or IP control systems with standard accessories as

Supply , installation , testing and commissioning of System cable CAT5 with

299 RJ45 Connector 2m complete with standard accessories /or as required.

Supply , installation , testing and commissioning of System cable CAT5 with

301 RJ45 Connector 20m complete with standard accessories as required.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, Installation, Testing & Commissioning of UHF Wireless Cardioid

lapel Micropphone system with 55" cable terminated with locking 4-pin HRS

type connector.Frequency Response of 60 Hz to 16 kHz , RF Sensitivity

10dBμV (S/N 60dB @ 20 kHz deviation) or better, Total Harmonic

16 MR Distortion <1.0% (at 1 kHz, ±20 kHz deviation) or better, Dynamic Range > Nos 1 59,381 59381

108dB or better, on/off switch operating range 60 mtrs or better, RF Power

Output: 10 mW or better, maximum Output level XLR / Balanced: +4 dBV

& 6.3 mm (¼"") / Unbalanced: -2 dBV.

Supply , installation , testing and commissioning of Horizontal Ceiling Array-

Microphone (back electret); Linear frequency response with high bandwidth;

17 MR Fixed connecting cable 3-pin XLR connector; Frequency response : 130 - Nos 1 59,381 59381

305 17,000 Hz complete with standard accessories as required.

Supply , installation , testing and commissioning of Supply, Installation,

Testing & Commissioning of 15W uniform coverage cabinet speaker with

high-performance, two-way, full-range, 4" (102 mm) surface mount. The

mounting system allows for 90 degrees of rotation horizontally, and 45

degrees of rotation vertically, and it can be easily installed on walls and

ceilings. The mounting system comes already assembled and ready to be

used. The speaker utilizes a 15 W transformer, that offers a selection of 3.7

W (70 V only), 7.5 W or 15 W delivered to the speaker system using either

70 V or 100 V lines. Selection is done with a Euro block connector. Long

throw 4" (102 mm) woofer housed in a fire rated ABS plastic enclosure for

extended LF performance down to 75 Hz.

Technical Specifications

- Input transformer (70V/100V): 15 W

- Frequency response (-10 dB): 75 Hz - 20 kHz1

- Sensitivity: 86.5 dB2

- Max SPL (calculated): 98.5 dB (104.5 dB Peak)

- Coverage angle: Horizontal 110°, Vertical 110°

- Power handling: 15 W (60 W Peak) Continuous Pink Noise (100 hours)

with standard accessories as required.

Supply, Installation, Testing & Commissioning of Digital Smart Mixer with

minimum 4 balanced mic inputs, 2 balanced Mic/Line inputs and 1 stereo

unbalanced input; Minimum 1 stereo and 2 mono outputs; 2-channel USB

audio interface for soft codec (Skype, WebEx) integration or playback from

19 MR computer; Full digital processing on inputs and outputs; minimum 8 x 3 Nos 1 105,586 105586

audio routing matrix; 6-channel Smart Mix (gate or gain sharing); Onboard

acoustic echo canceler (AEC) processing; Front panel direct operation and

Web Remote functionality; IP control for third-party CCS administration; Up

to 6 mixers can be linked using Cat5e cable.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, Installation, testing and commissioning of high impedence Class D

Dual zone amplifier with output power of upto 2x120W @ 70/100V.

frequency response of 55 Hz - 20 kHz (+0/–3 dB, @ 1 W reference 1 kHz);

20 MR THD <0.3% at rated power. Channel Separation ≤ –60 dBV (below rated Nos 1 61,623 61623

power, 1 kHz), Dynamic range > 88 dB. Shall include priority override and

Fire alarm interface, shall include necessary loudspeaker EQs complete with

311 standard accessories as required.

Supply , installation , testing and commissioning of 08 Port POE Switch for

313 System Interconnectivity complete with standard accessories as required.

Supply , installation , testing and commissioning of Wifi router complete

315 with standard accessories as required.

Supply , installation , testing and comissioning of 6 ft HDMI Cable with

High–Quality Connectors — 24K gold–plated connectors resist corrosion,

23 MR and offer the best possible connectivity and provides 4K@60Hz (4:4:4) Nos 3 2,493 7478

317 resolution complete with standard accessories as per tender specifications.

Supply , installation , testing and comissioning of 10 ft HDMI Cable with

High–Quality Connectors — 24K gold–plated connectors resist corrosion,

24 MR and offer the best possible connectivity and provides 4K@60Hz (4:4:4) Nos 5 3,917 19586

319 resolution complete with standard accessories as per tender specifications.

Supply , installation , testing and comissioning of 6 ft 15–pin HD (M) to

15–pin HD (M) & 3.5mm Stereo Audio Cable. Easy Connection —

25 MR Pre–terminated with molded 15–pin HD connectors (male to male), Nos 6 3,027 18161

gold–plated pins and thumbscrews and a 3.5mm stereo mini jack. complete

321 with standard accessories as per tender specifications.

Supply, Installation, Testing and Comissioning of 4 pair shielded STP cable

324 complete with standard accessories as per tender specification.

Supply, Installation, Testing and Comissioning of 2 core +shielded 24 AWG

27 MR Microphone cable complete with standard accessories as per tender Mtrs 50 138 6900

326 specification.

Supply, Installation, Testing and Comissioning of Neutrik bulk connector

328 and other accessories as per required.

1 AS PER DSR – 2018 AS PER MARKET RATE

DSR-2018 DESCRIPTION OF ITEM UNIT QTY. RATE AMOUNT RATE AMOUNT

Supply, Installation, testing and commissioning of 19" 24U AV rack

330 complete with standard accessories as per tender specification.

332 Display for CMD Room

Supplying, Installation , Testing & Commissioning of 65 inch 4K LED

display, Landscape & Orientation Resolution 3840X 2160 (16.9) UHD.

Brightness 350 NIT, Built in Wi-Fi and Bluetooth inbuilt digital signange

player, Android Builtin Memory 16 GB, Processor Cortex A55x4 1.1 Ghz

Processor Triple Core Mali 470 600 MHz 16 GB Memory24/7 operation,

1 MR Brightness 350 nits, Contrast Ratio 1100:1, 178/178 Viewing Angle Nos 1 131,064 131064

(Horizontal:Vertical), 8ms Response Time (milli seconds) Built in speaker

(10W+10W). Inputs DVI-D, Display Port, HDMI & Dual USB Plug & Play

, RJ45 LAN, Output Stereo mini Jack, Remote

Controlling of device Display remotely controlled, Internal/External, BIS

Certificates etc. complete in all respect etc.as required

Supply ,installation ,testing and commissioning of Cable & connectors and

336 other accessories as required.

338 TOTAL DSR+MR 16,593,585

DSR Amount MR Rate (In MR Amount

DSR/MR SUMMARY OF COSTS UNIT QTY. Rate

A.05 HVAC WORKS

PART A AIR-CONDITIONING SYSTEM

1 Dismantling, removing and disposing off of existing Units,ducts,piping ,valves etc complete along

MR with its supply air grilles, dampers and insulation. nos 5 21,539.88 107,699.39

2 MR DX TYPE HI WALL UNIT WITH ISOLATOR

Supply , installation, testing & Commissioning of DX type split AC units with air cooled condenser

mounted in outdoor unit complete with scroll/rotary compressor ,condensor ,wiring &

accessories . Indoor units shall be wall mounted type complete with evaporator ,fan, filter ,drier,

expansion devices & microprocessor control panel along with all accessories with refrigerant &

oil charge , cordless remote controls. The unit shall be suitable for working ,50 cycle /second ,1

phase AC supply .The unit shall be designed to take care of veritcal head 8mt & horizontal length

of 10 mt & necessary oil seprator shall be included ,Necessary supporting arrangement for both

indoor & outdoor units ( Powder Coated /Epoxy painted MS stand for ODU units as per

approved make shade by Architect) with necessary vibration isolation arrangement as per site

condition etc.( without condensate drain pipe ,electrical pipe ,electrical power & control cabling

between indoor & outdoor unit which shall be paid seprately ). The Color of the outdoor units to

be finalized by the Architect as per building Architectural elevation.

The coil in the outdoor units shall be provided with anti corrosive treatment . The contractor

shall visit the site & check the pollutant level such as Sulphur content & harmful acid content in

the atmosphere near site & accordingly anticorrosive paint treatment of coil to be provided.

All Unit shall be Minimum 3 Star Rating Based

Civil Work such as wall hole making , wall chisling ,refilling of chiseling part with mortar etc as per

site condition.

Nitrogen pressure testing for leakages & flushing during installation & after commissioning

between IDU & ODU with flar nuts

Removable Covers for all indoor & Outdoor units shall be supplied & put on the units after

installation & commissioning.

Incoming power supply shall be provided near each indoor units

Inclusive of Stablizer & Timer controller.

DX TYPE HI WALL UNIT

2.01 MR 2.0 TR With Rotary Compessor (2W+2S) Nos 4 68756 275023

3 Supply, installation, testing and commissioning of duct mounted air purification system/ cell

based on Photohydroionization cell with the capability to produce friendly oxidizers like Ionized

Hydro Peroxides, Super Oxide Ions, Hydroxides Ions with quad metalic coating (Rohdium, silver,

copper and titanimum) and duly enclosed by a poly casing tube that should prevent glass or

mercury leakage into the conditioned/ served space. The honeycomb matrix shall not be

accepted. The units should be designed after undertaking a load factor calculation for each

specific area where the equipment is to be installed. The load shall clearly state the number of

units required vis-à-vis the wattage of the units. The system shall be capable of reducing

microbial bacteria, virus and spores , VoC’, odors. The equipment shall conform to UL 1598

CAN/CSA C222 EN60335-1, EN60335-2-65, EU standards, certifications shall be submitted along

with the technical submital.

PART B PIPING SYSTEM

Supplying, laying/ fixing, testing and commissioning of following nominal sizes of

chilled water piping inside the building (with necessary clamps, vibration isolators

and fittings but excluding valves, strainers, gauges etc.) duly insulated with 80 kg/

cum density resin bonded fiber glass or 144 Kg / cum density mineral wool

insulation (non combustible) pipe section insulation covered with a layer of 120

gm/sqm polythene sheet (vapour barrier) and finally applying 0.63mm aluminium

sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as

amended up to date ) at joints and repairing of damage to building etc. as per

specifications and as required. Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class as

per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per

IS: 3589, from minimum 6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from

minimum 7mm thick MS sheet for pipes of 400 mm dia and above.

16.1.8 100 mm dia (50mm thick Insulation) MS PIPE Metre 5 2545 12725

16.1.9 80 mm dia (50mm thick Insulation) MS PIPE Metre 5 2151 10755

16.1.10 65 mm dia (50mm thick Insulation) MS PIPE Metre 12 1837 22044

16.1.11 50mm dia (50mm thick Insulation) MS PIPE Metre 15 1546 23190

16.1.12 40 mm dia (50mm thick Insulation) MS PIPE Metre 20 1349 26980

3 LOW SIDE VALVES

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the

16.7 chilled water plumbing duly insulated to the same specificationsas the connected piping and

adequately supported as per specifications.

BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O-Ring PN 16 pressure

rating for chilled water/hot eater circulation as specified

Supply, Installation, Testing, & Commissioning of Automatic air vent with ball valve in brass

4 MR construction complete with nipples, union etc. as required at all high points in the pipe lines. The

valve shall be such as to have non-return valve as integral part of the vent.

MR 15 mm dia auto air vent valve Nos. 5 1036 5,181

Supply, Installation, Testing & Commissioning of 25mm diameter Drain Valves in dirt legs Nos. 2

complete with nipples as per specifications.

6 REFRIGERANT PIPING

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

DSR VRF/VRV following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

AIR with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including

CONDITIONING accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric

SYSTEM 2019 nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid

Item no. 5 lines, all accessories as per specifications etc. as required :

5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation RMT 30 245.00 INR 7350.00

5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation RMT 190 331.00 INR 62890.00

5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation RMT 60 466.00 INR 27960.00

7 Drain Piping

Providing and fixing of PVC drain water piping complete with fittings, support as per specification

and insulated with 6 mm thick closed cell elastomeric nitile rubber insulation.

MR 25 mm dia O.D RMT 80 164 13107

MR 32 mm dia O.D RMT 30 230 6897

PART C AIR DISTRIBUTION SYSTEM

ACOUSTIC LINING

Supply,Installation charges of fire retardant flexible Canvas Connection between Indoor Units and Ducts

and Filters for Ducted Units

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass

wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to

2 16.21 centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to SQM 60 647.00 INR 38820.00

inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as

required and as per specifications

Supplying, Fixing,testing and commissioning of fire dampers in

supply air duct/main branch and return air path as and where

required of required sizes i/c control wiring,the damper shall be

16.20 motorized and spring return so as to close the damper in the

event of power failure automatically and open the same in case

of power being restored. The spring return action shall be

inbuilt mechanism and not externally mounted. The damper

shall also be closed in the event of fire signal complete as

16.20.1 Fire damper sqm 17 9883 168011

4 VOLUME CONTROL DAMPER

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round

ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as

per approved drawings and specifications of following sheet thickness complete as required.

16.12.1.1 Thickness 0.63 mm sheet SQM 440 983.00 INR 432520.00

16.12.1.2 Thickness 0.80 mm sheet SQM 330 1154.00 INR 380820.00

16.12.1.3 Thickness 1.00 mm sheet SQM 100 1273.00 INR 127300.00

16.12.1.4 Thickness 1.25 mm sheet SQM 50 1677.00 INR 83850.00

Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene 6500.00 INR 97500.00

rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints

shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per

specifications and as required.

6 Insulated Flexible Duct

Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly

16.19 supported at regular interval as per site requirement etc. complete as required as per specifications.

16.19.1 Thermal insulated flexible duct (200mmdia) RMT 100 538.00 INR 53800.00

7 Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

control dampers as per specifications.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without

volume control dampers complete as required

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without

volume control dampers with anti smudge ring & removable core.

GI Gravity Louver

Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

PART D MECHANICAL VENTILATION

1 INLINE FAN WITH SPEED REGULATOR

Supply, Installation, Testing and Commissioning of Inline Fan with direct/belt driven motor, belt

guard, motor mount & vibration isolation type mounting. Casing shall be of 14 gauge steel sheet

with min. 20 mm thick motor mounting plate. Vanes shall be Aerodynamically designed for

max.efficiency the casing shall be bonderized, primed & coated with enamel paint. Hub & blades

will be of Aluminium, blades shall be Aerofoil section for max. efficiency. Max clearance between

blade tip & fan housing shall be 5 mm. The blade shall be tested at speed of 25% above the

design operation speed. Motor shall be IE2 415/220 + 10% volts, 50 cycles,3 phase with class B

insulation. Max. speed of motor shall be 1500 RPM, complete as per specifications & drawings.

Fan should be complete with fire retardant, water proof double flexible connection between fan

2 VANE AXIAL FLOW FANS

Supply, installation, shifting, loading, unloading, testing & commissioning of Floor mounted,

double flanged, long casing (motor should completly accomodated in Fan casing) Vane axial

flow fans (Fire Rated) AMCA Certified, with adjustable pitch blade & angle, bird screen at fan

MR outlet , MS/GI casing, cast aluminium alloy impeller complete with TEFC Sq. Cage Induction

motor suitable for 415 volts ± 10%, 50Hz ± 3 %, 4/6/8 pole, three Phase, A.C supply class "H" /S

insulation with support, Phase& Motor rated Value IP55 . Motor shall be Thermally Rated for

250 deg C for 2 Hours should be certified as per BSEN12101-3:2002 standard & direct driven for

smoke extraction fans.

With the Approx. Motor HP as given below (to be supported with Documentary evidence at the

time of Technical Bid.)

The rate shall include supply and fitting of vibration isolators ( spring & rubber pads) complete

as per specifications and drawings including fitting of accessories like Fire retardant canvass

connection painting,gravity louver,bird screen etc. as required at site of work. Including all type

of civil work like cutting/holes/chasing/cut out in brick wall etc

1. Outlet Velocity for normal mode fans not to exceed 14.0 MPS

1. Outlet Velocity for Fire mode fans not to exceed 18.0 MPS

2. Total efficiency of normal fans shall not less than 60%

3. Fan motor shall meet IE2 standard as per IS-12615

4. Static pressure and Motor Rating : The Indicated static pressure and motor rating is only

provisional. Vendor to calculate static pressure based on drawings and pressure drop of finalized

Equipment and submit for approval. The procurement shall be processed only after duly

approval of calculation and selection from the Project Manager. Sound attenuator shall be as

specified with following characteristics:

5. Thickness of casing : for dia( 315-630 )mm - 2mm , dia ( 710-1120)mm - 3mm , dia (1250-

1400)mm - 4mm & dia 1600mm - 5mm.

INCLUSIVE OF starter panel .

2.01 Fan Capacity = 6500 CFM

Static Pressure = 30 mm Wg

Motor Rating = Not Exceed 5.5 KW

Noise level = not exceed 70 db. at 3 meter distance Nos 2 75121 150242

PART E ELECTRICAL

1 POWER CABLING

Supplying, laying, effecting proper connections, testing & commissioning of the following sizes of

1.1 KV -Cross Linked Poly Ethelene armoured aluminium conductor cables conforming to

MR relevant latest amended Indian Standards laid over MS supports & Cable Trays including

clamping the cables to supports in an approved manner as required complete with all

MR 1x4.0 Cx 16 Sqm Al Conductor Rmt 50 297.03 14,851

MR 1x4.0Cx 10 Sqm Al Conductor Rmt 100 229.27 22,927

MR 1x4.0Cx 6 Sqm Al Conductor Rmt 100 106.75 10,675

2 COPPER CONTROL CABLING INCLUDING CABLE TRAY

Supply and laying ,testing and commissioning of following sizes of Copper conductor control

MR cables with PVC conduit & fixing clamps and effecting proper connections to equipment etc. of

following sizes :

MR 1x4.0 Cx 16 Sqm Cu Conductor Rmt 50 699.26 34,963

MR 1x4.0Cx 10 Sqm Cu Conductor Rmt 100 485.09 48,509

MR 1x4.0Cx 6 Sqm Cu Conductor Rmt 140 302.04 42,285

Earthing Strip / Wires.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with

existing surface/ recessed conduit/ submain wiring/ cable as required

GRAND TOTAL 4265160.64

GRAND TOTAL 4265160.64

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING OF INTERIOR PLUMBING WORK FOR CIL, 3RD FLOOR TOWER III, EAST

KIDWAI NAGAR, NEW DELHI

AS PER DSR – 2018 AS PER MARKET COMMENTS

S.NO DESCRIPTION OF ITEM RATE AMOUNT RATE AMOUNT

UNIT QTY (RS.) (RS.) (RS.) (RS.)

SUB HEAD (A) :- SANITARY FIXTURES

A1 Water Closet Suites

Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous china

flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm

flush bend, overflow arrangement with specials of standard make and

mosquito proof coupling of approved municipal design complete,

including painting of fittings and brackets, cutting and making good the

walls and floors wherever required :

W.C. pan with ISI marked black solid plastic seat and lid

A2 Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with standard flush

pipe and C.P. brass spreaders with brass unions and G.I clamps

complete, including painting of fittings and brackets, cutting and making

good the walls and floors wherever required . Each 1.00 52350.00 52350.00 MR-2

A3 Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as

per IS: 13983 with C.I. brackets and stainless steel plug 40 mm,flxiable

pipe including painting of fittings and brackets, cutting and making good

the walls wherever required :

Kitchen sink with drain board

a) 510x1040 mm bowl depth 250 mm

A4 White Vitreous flat back Wash basin size 550x450 mm with a single 15

mm C.P. brass pillar tap with,flxiable pipe including painting of fittings

and brackets, cutting and making good the walls wherever required :

A5 Providing and fixing CP Brass 32mm size Bottle Trap of bapproved

quality & make and as per the direction of Engineerin- charge.

A6 Providing & fixing C.P. Brass health faucet for ablution with 1 meter

long PVC tube, hand shower, couplings, wall hook and other

A7 Providing & fixing C.P. Brass Double coat Hooks with CP screws. Each 4.00 348.00 1392.00 MR-7

SUB HEAD (B) :- TOILET REQUISITES

B1 Providing and fixing of C. P. brass towel rail 600 x 20 mm size

complete with C.P. brass brackets

B2 Providing and fixing of C. P. brass towel ring complete with C.P. brass

B3 Providing and fixing CP Brass liquid soap dispensor 109 mm wide, 125

mm high and 112 mm distance from wall of standard shape with bracket

and all fittings of the same material of approved quality and colour.

B4 Providing & fixing of approved coloured verticle type hot water

geysers. The inner container shall be made of copper sleeve with PUF

insulation between inner and outer container, element pipe and heating

element, pressure cum vaccume release, thermostat and thermal cutout

arrangements and fusible plug. The outer container shall be of powder

coated finish with all other accessories including fixing brackets

complete as required.

B5 Wall Mountable Water Purifier With Transparent Cover. Mineral ROTM

Technology - Double Purification by RO+UF with TDS Controller - KENT

B6 Providing and fixing in position best paper holders fixed into wall with

C.P brass screw complete in all respects including cutting and making

goods with walls etc.

SUB HEAD (D) :- INTERNAL DRAINAGE WORK

Providing and fixing C.P. brass long body bib cock of approved quality

18.51 conforming to IS standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore Nos. 4 552.35 2209.4

SCHEDULE OF QUANTITIES FOR SUPPLY, ERECTION, TESTING AND COMMISSIONING OF INTERIOR PLUMBING WORK FOR CIL, 3RD FLOOR TOWER III, EAST

KIDWAI NAGAR, NEW DELHI

AS PER DSR – 2018 AS PER MARKET COMMENTS

S.NO DESCRIPTION OF ITEM RATE AMOUNT RATE AMOUNT

UNIT QTY (RS.) (RS.) (RS.) (RS.)

Providing and fixing C.P. brass stop cock (concealed) of standard design

18.52 and of approved make conforming to IS : 8931.

15 mm nominal bo

Providing and fixing P.V.C. waste pipe for sink or wash basin including

17.28 P.V.C. waste fittings complete.

17.28.2 Flexible pipe

Providing, fixing, testing and commissioning of Centrifugally cast (spun)

iron socket & spigot (S&S) pipeas per IS: 3989 including all fitting .

17.35.1. 110mm Pipe

Providing and fixing bend of required degree with access door,

14 insertionrubber washer 3 mm thick, bolts and nuts complete. (Sand cast

iron S&S as per IS-3989) Each 5 461.7 2,308.3

Providing and fixing trap of self cleansing design with screwed down or

17 hinged grating with or without vent arm complete, including cost of

cutting and making good the walls and floors :)

17.60.1. Sand cast iron S&S as per IS: 3989

Cutting chases in brick masonry walls for following diameter sand cast

iron/centrifugally cast (spun) iron pipes and making good the same with

17.61 cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 12.5 m nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30 X 30 cm in walls including making good the same.

18.76.1With common burnt clay F.P.S. (non modular) bricks

Making chases upto 7.5 X 7.5 cm in walls including making good after

housing G.I. pipe etc. meter 12 154.15 1,850

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand

: 10 graded stone aggregate 40 mm nominal size) alround SW pipes

including bed concrete as per standard design. (around horizontal upvc

pipe vertical termaination to manhole )

19.2.1 100mm diameter S.W. pipe

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain &

brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in

Charge.Concealed work, including cutting chases and making good the

18.8.1 15 mm nominal outer dia pipes Meter 64.21 409.65 26,301.58

18.8.2 20 mm nominal outer dia pipes Meter 15 478.15 7,172.25

Providing and fixing of gun metal gate valve with CI wheel of approved

quality (screwed ends)

TOTAL DSR+MR 477434.48

S No DSR 2019/ MR DESCRIPTION UNIT QTY RATE

DSR (INR) NON-DSR

Providing, laying, testing & commissioning of 'C' (INR)

class heavy duty MS pipe conforming to IS 3589/IS

1239 including Welding, fittings like elbows, tees,

DSR WET RISER flanges, tapers, nuts bolts, gaskets etc. and fixing the

1 & SPRINKLER pipe on the wall/ceiling with suitable clamp/support

2019 frame and painting with two or more coats of

synthetic enamel paint of required shade complete as

Providing and fixing ISI Marked of approved make

Fire Extinguishers complete with all accessories as

per manufacturer's specifications.

a) CO2 gas nozzle type - 4.5 Litre capacity

b) Mechanical Foam gas cartridge type. 4.5 Kg

MR capacity (IS:15683). NOS 2 2383.54 4767.08

c) ABC dry powder stored pressure type 4.5 kg

MR capacity (IS:15683). NOS 2 2740.30 5480.59

DSR WET RISER Providing, fixing, testing & commissioning of 15mm

3 & SPRINKLER dia quartzoid bulb type sprinklers of rating 68 degree

2019 centigrade with required accessories :

Pendant type Each 100

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with

DSR WET RISER maximum working pressure of 175 PSI test pressure

4 & SPRINKLER of 875 PSI (Burst) with branch line (Inlet) 25mm

2019 Item no. 25 NPT male thread to sprinkler head (Outlet) 15mm

NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Supplying & Fixing of battery operated illiminated

"EXIT" signage, with 2hrs power Battery backup

complete as required.

Supplying,fixing, testing and commissioning of

DSR WET RISER butterfly valve of PN 1.6 rating with bronze/gun

6 & SPRINKLER metals duly ISI marked complete with

2019 nuts,bolts,washers,gaskets conforming to IS 13095 of

following sizes as required

& SPRINKLER Providing & fixing of pressure switch in M.S. pipe

2019 Item no. line including connection etc. as required.

& SPRINKLER Providing & fixing flow switch in following sizes

2019 Item no. M.S.pipe including connection etc as required

GRAND TOTAL 685681.01

GRAND TOTAL 685681.01