REPAIR/REPLACEMENT OF CUPBOARD , PLUMBING , SANITARY AND CERTAIN B/R WORKS FOR MD ACCN IN SMQ/OUTSIDE POCKET AREA AT AF STATION GWALIOR

Amount

S & F in repair 18mm thick PVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer including demolition of existing board any type or specification complete all as specified and directed.

All as per ser Item No 1.00 here-in-before but one side prelaminated type

All as per ser Item No 1.00 here-in-before but 12 mm thick both side plain

S & F continuous (Piono) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed.

S&F mild stainless steel magnet catchers for the cupboards/cabinate (including necessary fixing arrangement)

S&F aluminum handles cast type anodized 150 mm size.

S&F 125 mm size, Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc.complete all as specified and directed.

M & L for rendering15 mm thick in CM 1:6 on concrete surfaces as on wall finished even and smooth complete all as specified and directed

M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper incl a coat of white wash, complete all as specified and directed.

S&F in repair stainless steel heavy duty curtain rods of 20mm dia with side brackets complete all as specified and directed

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and directed

-do- but exc 1.5 and n.exc 4 Sqm each.

S&F Factory made single extruded WPC(Wood Polymer Composite) solid door/window/Ceosetory window & other Frame/Choukhat of size 50x75 mm comprising of virgin PVC polymer of K value 58-60 (suspendion Grade), calcium carbonate and natural fivers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent and screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrawal strength of 2200 N (Face) & 1100N (Edge), minimum compressive strength of 58N/mm2, modules of elasticity 900N/mm2 and resistance to spread of frame of Class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge (MS hold fast/lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed

S&F Factory made Solid PVC moulded Door shutter 28 to 30 mm thick (stiles), with particle board core with 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on front face and 2mm plain colour PVC sheet on back face , supplying & fixing in frame at site as per specification and direction

S&F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window/ ventilator frame, shutters & partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc., aluminium sections as approved by GE complete all as specified and directed.

S&F powder coated anodised Aluminium grills with aluminium frame fixed with stainless steel screws in windows/ventilator, openings etc, complete all as specified.

Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, complete all as specified and directed.

S & F in repair 100mm M.S butt hinges with MS frame work by spot welding incl necessary arrangement and handling of welding machine upto third floor of Bldg complete all as directed and specified by Engineer- in-charge.

All as item No 19.00 here-in-before but 75 mm size

All as item No 19.00 but mild steel door spring of size 200 mm

S&F Mild steel Mortice lock double handle, vertical type, 06 levers for door complete all as spd and directed by Engr in charge.

Easing of wooden/aluminium door shutters of any size for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc. complete all as directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified.

S & F in repair auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinete shutter.

S&F in repair stainless steel handles of 100mm size for kitchen cabinate shutter complete all as specified.

S&F in repairs stainless steel drawer telescopic channel of size 500mm long of load bearing capacity 35 Kg complete all as specified and directed

S&F in repairs stainless steel drawer telescopic channel of size 550mm long of load bearing capacity 35 Kg complete all as specified and directed.

S&F in repairs stainless steel drawer telescopic channel of size 600mm long of load bearing capacity 35 Kg complete all as specified and directed Make Godrej or equivalent as approved

S&F in repair front glass Shelf 8mm thick (chrome finish) of size 300mmx150mm fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F in repair corner galss shelf 8mm thick (pack of three) of (chrome finish) fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F in repair high quality plastic bathroom cabinet of size 550 x 342 x 125mm consisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed

S&F in repair CP soap dish all as specified and directed.

Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material n exc 2.5 KM distance and depositing where as directed, complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.

M&L for 25 thick PCC 1:2:4 type B-O using 12.5 mm gradred stone aggregate as in levelling course finished even an fair complete all as specified and directed

M&L for non skid coloured ceramic floor tiles 7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed in CM (1:6 )complete all as specified and directed.

M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.

S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified in SSR and complete all as specified and directed.

S&F in repairs viterous China WC pan pedestal pattern white (excluding flushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor complete all as spd and directed.

S&F seat cover of Vitreous china,pedestal pattern water closet including mild steel CP hings complete all as specified and directed by Engr-in-charge.

Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes byu porable Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete.

Supply and fix in repairs of PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accesseries to wall complete all as specified and directed.

S&F in repair seat cover of Vitreous china,semi pedestal pattern water closet (Anglo indian type) complete all as specified and directed by Engr-in-charge.

S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.

All as per item No 47.00 here-in-before but 20mm bore.

M&L for re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified and as directed.

All as per item No 49.00 here-in-before but 20mm bore.

S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.

All as per item No 51.00 here-in-before but 20mm bore.

Repair leakage of 15 mm bore CP bib tap/ Pillar tap/ stop cock by replacing of necessary brass spindles as required complete all as specified and directed.

Repairing of leakage in concealed stop cock 15/20 mm bore by replacing of necessary brass spindles half round turn/full round turn as required complete all as specified and directed.

Refixing old flushing cisterns of any capacity complete with bend and bend pipe and connecting to WC after making it functional by adjusting the level of floatt valve, replacing rubber waster etc complete all as specified and directed.

S&F in repair chromium plated health faucets with flxible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete as directed.

S&F in repairs PTMT waste coupling 32x100mm sink, complete all as specified and directed.

S&F in repair 15 mm dia angle Stop valves, of PTMT approved any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms), complete all as specified and as directed.

S & F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.

S&F in repair 15 mm dia, bib tap standard of PTMT approved colour high pressure screwed for iron pipe and fixed, (minimum weight 105 gms), complete all as specified and as directed.

S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S&F in repair 15 mm dia, fancy type pillar tap of PTMT approved colour high pressure screwed for iron pipe and fixed (minimum weight 120 gms), complete all as specified and as directed.

S & F in repair, fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed.

S&F in repairs PVC connections 15mm size of PTMT of 450mm long complete all as specified and directed.

S&F shelf of PTMT fixed with and incl CP brass screws and or any other fixing arrangement (min weight 300 gms), complete all as specified and directed.

S & F in repairs Swivel shower of PTMT approved colour for fixing with 15 mm pipe, (Minimum weight 40 grms), including Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour, (Minimum weight 40 grms), complete all as specified and as directed.

S&F in repairs PTMT waste pipe 32 x 800 mm for WHB / sink, complete all as specified and directed.

S&Frotational mounded polythene water storage tank of capacity 500 liters (Cylindrical /vertical with close top) triple layer construction fixed in position incld dismantling of old PVC tanks complete all as specified and directed.

All as per item No 68 here-in-before but 1000 ltrs capacity, including float valve and dismantling of old PVC (Capacity exc 500 & n.exc. 1000 ltrs Litres) & removing to where directed complete all as specified and as directed.

M&L for cleaning of overhead tank of any description and in position, removing all scale and dirt by detergent/detergent powder and finally disinfected with bleach wash etc from tanks and mouths of circulating pipes etc and writing the date of cleaning and the due date of cleaning, capacity of tanks exc. 250 litres and not exc. 500 litres complete all as specified and as directed.

S&F in repair tank cover black of size /shape for water tanks of storage capacity exc 250 ltr but not exc 500 ltr each (with necessary fixing/ locking arrangement) to suit the existing provision complete all as specified & directed.

Taking down and re-fixing of old aluminum window in same opening with necessary required repairs and fittings including glass rubber bedding and glazing clips (Glass pan and wire gauge will be measured and paid separately are n. exc 2.00 sqm each.

Cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed.

S&F in repair PVC grating 100 mm dia doom type with waste hole fixed in cement complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber rings joints laid in fixed to walls including clamps of the following bore etc all as specified.

S & F 75 mm bore PVC (SWR) bends, complete all as specified and as directed.

S & F 75 mm bore PVC floor traps under floor , complete all as specified and as directed.

S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.

S&F in repair ball / float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore pipe minimum weight 455 gms complete all as specified and as directed.

S&Fin repairs 3 mm thick figured glass pin head type & glazing with oil putty in squares not exc 0.5 Sqm in each pan, incl hacking out old broken glass pane of any thickness and size, complete all as specified and directed.

S&F in repairs 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pan, incl hacking out old broken glass pane of any thickness and size complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples etc. in wooden door / window, completed all as specified and directed.

S&F in repairs towel rails 600 mm long of PTMT fixed with and including CP brass screws and plastic cleats (min weight 190 gms), complete all as specified and directed.

S&F in repair fancy type decorated PVC sheathed GI curtain hanging rods 20 mm dia including brackets, including fixing arrangement and all fitting complete all as specified and directed.

Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.

S & F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring over all length of cover plate 150mm.

M&L Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over and 20mm screed bed in CM 1:4 all as specified and directed.

Cleaning of existing drain of any size or shape by removing sludge /silt/ earth (liquid, semisolid & solid) completely and removing the rubbish out of the MD land upto any distance upto entire satisfaction of Engr-in-Charge

Cleaning away all grass vegetation, saplings, shrubs , brush wood under growth roots, bushes of any height/dia on roof top/chhajja of biuldings of any height and making repairing of roof/chhajja by rendering/pointing (in CM1:3) /laying cement concrete 1:2:4 (12.5mm graded aggregate) to make the roof/chhajja surface smooth and free flow of water and removing rubbish out of the MD land upto any distance upto entire satisfaction of Engr-in-Charge

M & L for rewriting letter or figures (Block/Roman/Indian/Italic) height n.exc 30 cm all as specified and directed.

Demolition of cement concrete/lime concrete in roofs in any condition and discription

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof padding concrete as in leveling course to maintain the true roof slope, roof kerb or mud stops rounded or chamfered in edges etc, finish even & fair without using extra cement, complete all as specified and directed

M&L for apply acrlic based waterproofing flexible liquid applied single component, weather resistant acrylic waterprrofing membrane for all types of exposed roof slabs (new and old) terraces (slopped and flat) etc ultra voilet rays and heat reflecting system complete all as specified and directed.

S&F 10mm thick toughened frosted 2 fixed glass with one frosted slider glass with lock (wall to glass) including all ( fittings/fixures, sliding channel, A2 Radu sliding machine, handles 50mm D profile, L corners, Silicon hinges loose hardware etc complete as per site requirement) complete all as specified and directed. Appx qty of glass (measured flat) 8.00 Sqm complete all as specified and directed Note - 2 years warranty in all respect shall be given by the contractor on Rs-100/ stamp paper

NOTE:- Site clearance of materials- All demolished material obtained from dismantling/demolition items shall be deposited at place shown by Engr-in-charge properly spread and levelled and site to be cleaned to the entire satisfaction of Engr-in-charge otherwise panel recovery to a sum of Rs. 25000.00 be deducted from dues without any prior intimation.

J.N.R. Engineers and Builders

M/s. Ravi and brothers