Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC | L1 | Accepted-AOC DUE TO LOWEST BID | |
| 2 | L2₹15.6 L+₹19,303.96 (1.25%)Rejected-Finance VIAH ROAD TEH GHATT FEROZEPUR PIN 152001 PB | FIROZEPUR | PUNJAB | 152001 | L2 | Rejected-Finance DUE TO HIGHER BID | |
| 3 | L3₹15.7 L+₹22,298.16 (1.44%)Rejected-Finance | L3 | Rejected-Finance DUE TO HIGHER BID | |
| 4 | L4₹15.8 L+₹38,640.31 (2.50%)Rejected-Finance | L4 | Rejected-Finance DUE TO HIGHER BID | |
| 5 | L5₹16.3 L+₹85,203.13 (5.52%)Rejected-Finance 47 C MODEL TOWN EXTENSION LUDHIANA PB | LUDHIANA | PUNJAB | 141001 | L5 | Rejected-Finance DUE TO HIGHER BID |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
3 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) FEROZEPUR CANTT
GE (West) FEROZEPUR CANTT
CERTAIN B R REPAIR TO SHAHEED BHAGAT SINGH ENCLAVE SUB AJIT SINGH ENCLAVE UNDER AGE B R II OF GE (West) FEROZEPUR CANTT
2023_MES_591049_1
802023/GE-08/E8
Open Tender
Civil Works
Item Rate
180 days
FEROZEPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) FEROZEPUR CANTT
₹40,000
Yes
26 Jun 2023
6 May 2023
5 Jun 2023
6 May 2023
3 Jun 2023
20 May 2023
Amount
Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
All as per seriol item No 2 here-in-before but using old bricks retrieved from dismantling under seriol item no 1 here-in-before including cleaning and removal of mortar from old bricks etc complete all as specified and directed.
Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L rendering 15mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L rendering 5mm thick cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and even without using extra cement complete all as specified and directed.
Supply only integral Liquid water proofing compound complete all as directed. Note: (WPC to be mixed @200ml per 50 Kg bag of cement)
M&L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as specified and directed.
M&L for preparing newly plastered surfaces of wall and applying 2 coats of distemper oil emulsion over 2mm thick wall care putty to any shade on walls surfaces complete all as specified and directed.
M&L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for Preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each complete all as specified and directed.
All as per seriol item No 14 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed.
Taking down Chowkats or frames not exceeding 1.5 sqm each complete all as specified and directed.
Taking down shutters of any description, exceeding 1.0 sqm and not exceeding 2 sqm each and refixing in same opening complete all as specified and directed.
Resecuring, or easing & adjusting of shutters without taking down, of any description exceeding 1 sqm not exceeding 2 sqm each complete all as specified and directed.
Taking down shutters only of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed.
S&F factory made pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.
S&F factory made Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including one shop coat of red oxide primer complete all as specified and directed.
M&L cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified and directed.
S&F of factory maded 35mm thick flush door shutter of solid core construction with particle board core and plywood face panels, commercial type on both sides one face is covered with decorative face veneer with lipping /frame to match complete all as specified and directed.
S&F of factory made glazed and skeleton shutters 30 mm thick 2nd class hard wood open rebated and prepared to receive glass divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.20 (a) (glass windows etc) complete all as specified and directed.
S&F 300mm long alluminium alloy anodised, sliding door bolt with hasp,staple (bolt type) and fix clips of sheet,cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F alluminium anodised tower bolts 200 mm long fixed to doors complete all as specified and directed.
S&F alluminium anodised handles 150 mm long fixed to doors complete all as specified and directed.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.
S&F 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed
M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for Preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide priming complete all as specified and directed.
M&L for 0.56 mm Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.
S&F factory made Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail MS frame shall be covered with heat moulded plain / coloured PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the styles & rails with suitable PVC sheet beading and jointed togeather with solvent cement complete all as specified and directed.
S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed.
S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.
Supply and fixing PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed. Make: Prayag/Polytuf or equivalent in approved makes.
Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.
S&F 18mm thick Prelaminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelves including 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and directed.
S&F continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw complete all as specified and directed.
S&F 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.
S&F alluminium anodised handles 100 mm long fixed to windows complete all as specified and directed.
S&F alluminium anodised tower bolts 100 mm long fixed to windows complete all as specified and directed.
S&F in repairs 40mm dia, cupboard knobs with nut, screw & washer of brass, polished
S&F in repair 100mm long hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair 300mm long alluminium alloy anodised, sliding door bolt with hasp,staple (bolt type) and fix clips of sheet, cast of extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repair alluminium anodised handles 150 mm long fixed to doors complete all as specified and directed.
S&F In repair alluminium anodised tower bolts 200 mm long fixed to doors complete all as specified and directed.
S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring as fixed in repairs complete all as specified and as directed.
S&F in repair butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and directed.
S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples fixed in repairs complete all as specified and directed.
Taking down aluminium windows shutters only (area exceeding 0.5 sqm but not exceeding 1.5 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket & new aluminium cleats of existing make and also refixing the locks & rollers in existing position with and including new screws including refixing the window shutters in same opening complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description ) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S&F 4.80 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
All as per Seriol item No 55 here-in-before but exceeding 0.5 Sqm in each pane complete all as specified and directed.
S&F anodised aluminium window , ventilator etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of approved size, including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws, including necessary anodised aluminium fittings like handles etc as fixed in reapair complete as per manufacturers instructions. Make: Jindal/ Hindalco or equivalent in approved makes. Note: EPDM Rubber beading/gasket measured and paid seperatley.
S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters complete all as specified and directed.
Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.
M&L 40mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in floor topping, surfaces finished even and fair without using extra cement complete all as specified and directed.
M&L 50mm thick, PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in plinth protection, shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.
M&L cement concrete 1:4:8 type D2 (using 40mm graded aggregate) in foundations/sunken filling and mass concrete complete all as specified and directed
Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed.
All as per item No 63 here-in-before but 20 mm bore tubing.
M&L for GI steel water tubing, 15mm bore medium grade galvanized with all fittings and fixed to walls and celling or laid in floor, complete all as specified and directed.
All as per item No 65 here-in-before but 20 mm bore tubing.
Fixing only, after cleaning old steel water tubing,15 mm bore and connections in new or old position using new fittings complete all as specified and directed. Notes:-servicable pipes obtained from item 63 shall be reused and cost of new fittings, if required shall deemed inclusive of quoted rates.
Fixing only, after cleaning old steel water tubing,20 mm bore and connections in new or old position using new fittings complete all as specified and directed. Notes:-servicable pipes obtained from item 64 shall be reused and cost of new fittings, if required shall deemed inclusive of quoted rates.
S&F in repair bib taps, fancy type CP, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed. Makes: - Parko/ESSCO/Prayag or equivalent in approved makes.
S&F in repair stop valves, fancy type, CP with long shank and cup ( concealed type ), screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed. Makes: Parko/ESSCO/Prayag or equivalent in approved makes.
S&F in repair Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Makes: -Parko/ESSCO/Prayag or equivalent in approved makes.
S&F in repair gunmetal gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.
S&F in repair central hole basin mixer for wash hand basin including all fittings ie including connection pipe as per manufaturers specification complete all as specified and directed. Makes :-Prayag Cat No 6750 or techno-commercially equivalent in approved makes.
S&F Wall mixture 3 in-1 with provision of overhead shower complete with 115 mm long bend pipe on upper side,connecting legs and wall flange complete all as per manufacturer's instruction complete all as specified and directed. Makes :-Prayag Cat No 6775 or techno-commercially equivalent in approved makes.
S&F 15mm dia CP Sink cock swan neck regualar spout with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Makes:-Prayag Cat No 6716 or techno-commercially equivalent in approved makes.
M&L taking down existing Bib tap and pillar taps/sink mixture/wash hand basin mixture of any type for replacing washer/ brass spindle etc. and refixing the same complete all as specified and directed.
M&L taking down existing stop valve/angle cock 15 mm bore by replacing washer/spindle etc.and refixing the same complete all as specified and directed.
S&F PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and directed.
S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.
S&F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F in repair PVC cover for tanks of capacity 500 litres to 1000 litres including taking out old broken covers with GI nuts and bolts 3/16" dia and 1" long bolts with washers (8 Nos with each cover and 2 Nos hing bolts and nuts 8 mm dia 50mm long complete all as specified and directed.
S&F 500 litre capacity triple layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including taking down old PVC water tank all as specified in SSR Part-I complete all as specified and directed.
S&F 15mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.
S&F vitreous china wash down water closet pan ( pedestal pattern ), white/ coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc. complete all as specified and directed.
S&F in repair Low level flushing cistern, PVC (white), 10 liters capacity, with inlet ball float valve, PVC flush pipe and necessary fixing accessories including connecting to existing water pipe and WC etc complete all as specified and directed.
M&L wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings of 32mm bore size, waste pipe PVC of 32mm bore,PVC connector 450mm longs with angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.
S&F in repair Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union, cap and fixing in repair complete all as specified and directed. Makes;- Prayag or equivalent in approved makes.
S&F PTMT grating doom 100mm dia with or without waste hole fixed in repairs complete all as specified and directed.
S&F in repair 32mm dia waste coupling of PTMT fittings full or half threaded(minimum wt 32mm-45 gms for steel sinks/wash hand basin etc., as fixed in repairs complete all as specified and directed.
S&F Seat Cover(Whitecolour) for pedestal pattern as fixed in repairs complete all as specified and as directed.
S&F Corner glass shelves 300 mm radious,8mm thick as per sample radious for bath room, fixed on suitable support of brass chromium plated clips complete all as specified and directed. Makes: Prayag Cat No BEA -46 or techno-commercially equivalent in approved makes.
S&F in repair 125 mm chromium plated shower rose with or without swivel joints any size including fixing to steel pipe or union complete all as specified and directed.
S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and directed.
S&F Stainless steel soap dish (not less than 1mm thick) of type as directed, fixed to walls with chromium plated brass screws with wooden/rawl plugs,in repair complete all as specified and directed.
S&F Toilet paper holder of brass, chromium plated or stainless steel fixed in repair to walls with chromium plated (CP) brass screws complete all as specified and directed.
S&F replacement of pressure JET for EWC including PVC connection and CP fitting as fixed in repairs complete all as specified and directed. Makes: Prayag Cat No BEA -18 or techno-commercially equivalent in approved makes.
S&F in repair syphon kit for dual/single type PVC flushing cistern for 10 ltr capacity incl washer, flushing handles etc as fixed in repairs complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and directed.
S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed to walls or laid in trenches complete all as specified and directed.
S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.
S&F 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.
Dismantling floor hearth or wall/stone tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Non - skid ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular),primium quality on vertical surfaces such as in skirting /dado etc area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L Glazeded ceramic coloured (colour & shade as approved) tile 350mmx250mmx7 mm/450mmx350mmx7mm thick on vertical surface such as skirting / dados set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in white/ coloured cement with pigment to match the colour of tilescomplete all as specified and directed.
M&L Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 10 mm thick plaster as in back coat cement mortar 1:4 including moulding at corners and polishing type complete all as specified and directed.
M&L for welding in running for thickness of metal tio be welded n exc 6mm in repair complete all as specified and directed.
S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
S&F Grating round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed.
S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed.
All as per item No-115 here-in-before but with waste hole of PTMT. (Minimum weight 100gms)
S&F in repairs Stack clamps for 100 mm dia pipes, out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
M&L Stack clamps for 75 mm dia pipes , out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipecomplete all as specified and directed.
S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good of disturbing gound with PCC 1:2:4 complete all as specified
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and directed.
M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed.
M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
S&F Stainless steel plate rack of standard pattern & of size 900 x 750 x 250 mm.The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.
S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed.
Demolition of cement concrete of any description as in roof padding , coping, chajja etc. water tank bases on roof etc. unreinforced (other than ground floor) complete all as specified and directed. Note:- Debris/demolished material to be removed out of MD land or 500 m away from the work place in low lying area.
M&L for 25 mm average thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in roof levelling course complete all as specified and directed.
M&L for rendering 10mm thick in cm (1:3) on concrete surfaces of roof padding with integral water proofing compound @ 3 % by weight of cement content finished even & smooth without using extra cement complete all as specified and directed. Note: Water proofing compound to be measured & paid separately.
M&L Cutting grooves in brick wall, 75mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.
M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polster non wove fabric (wt. not less than 150 gms/sqm) laid over primed / tack coat of paving bitumen 85/25 on roof surfaced by forced applicaion complete including taking down/removal of existing treatment complete all as specified and directed.
M&L for taking down existing low level flushing cistern and replacing the syphon, ball valve with washer and Flush handle complete all as specified and directed.
M/s Sarup Singh
M/S KRISHNA ENTERPRISES
Kissan contractor and engg works
M/S Manmohan Singh Contractor
M/s Harkesh Kumar Bansal
MN BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .