REPAIR/REPLACEMENT OF SECURITY LIGHTS, POLES, HIGH MAST LIGHTS AND CONNECTED WORKS AT DOMESTIC AREA, VAYU VIHAR AND OTHER LOCATIONS AT AFS ADAMPUR

Amount

Dismantiling / taking down the street light / securty lights/ tower search lights/tarmic lights / high mast light and aviation obstruction lights on OH tanks/ Towers of any capacity & description from exising LT pole/ walls/towers , at any height and refixing the fittings in existing / another location after repair work or carrying to MES store and all as directed by Engr-in-charge.

HPSV/MH Lamp fittings 70 Watt to 400 watt and LED light fittings 32 watt to 120 Watt

Aviation obstruction light any capacity

Note:- (i) Replacement of defective parts accessores shall be measured and paid separately under relevant item of Sch 'A'. (ii) Transport and T & P i.e. Ladder spanners or any other equipment for repair of street light/security lights/high mast lights/tower search lights and Aviation obstruction light shall be provided by Contractor and cost for the same deemed to be included in respective item of Sch 'A' (iii) Fixing of MH and HPSV lamp shall be measured and paid separately.

Supply & fix copper ballast/ Electronic Ballast suitable for HPSV/MH lamp ballast for 400 Watt fittings complete all as specified and directed.Make :- Bajaj /Halonix/Crompton

Supply & fix MH single ended tubler lamp suitable for 400W fittings complete all as specified and directed.Make:- Crompton /bajaj / Halonix

S & F Ignitor suitable for HPSV/MH lamps 70W to 400W complete all as specified.Crompton / bajaj / Halonix

S & F LED driver suitable for existing make and model of LED fitting 32W to 120W complete with internal wiring and accessories all as specified and directed.Crompton/Bajaj /surya/Philips/Havells/ Halonix

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying/taking out of cables and foundation of poles etc. and getting out, complete all as specified and directed.

Returning, filling in trenches (soil), including spreading, leveling and well ramming in layers not exceeding 25 cm thick, complete all as specified and directed.

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5metre above the starting point, complete all as specified and directed.

M & L sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches /ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

M & L brick portection with, locally available, sub class `B’ bricks (old size) laid flat and dry perpendicular to the direction of cable adjacent to each other, in trenches over the cable for protection, complete all as specified and directed.

Laying only, old sub class 'B' old size bricks laid flat and dry perpendicular to the direction of cable adjacent to each other, in trenches over the cable for protection, complete all as specified and directed. Note:- Old retrieved serviceable bricks are to be re-used.

S & F GI pipe light grade 40mm dia bore for cable protection fixed to pole/ wall or laid under floor/ road/pavement, including taking out old pipe, complete all as specified and directed by the Engineer-In-Charge.

S & F GI pipe light grade 50mm dia bore for cable protection fixed to pole/wall or laid under floor/road/pavement, including taking out old pipe, complete all as specified and directed by the Engineer-In-Charge.

Taking up or down defective/faulty LT underground cable 1100 volts 10 Sqmm to 50 Sqmm 3.5 core from the existing trench /duct / pole etc and Re-laying the same in the trenches / duct / pole etc after rectification of defects, including meggering of cable, provn of cable lugs, glands, thimble, insulation tape and connecting up with existing control gears, panels etc as per site requirement, complete all as specified and as directed. Note:- Excavation, returning filling etc shall be measured and paid seperately.

Supply, jointing & testing, straight through joint kit complete with jointing material and accessories suitable for 1.1KV grade, LT, underground XLPE insulated armoured aluminium conductor, 3.5/4.0 core 25Sqmm to 50Sqmm size cable, complete all as specified and directed.

Supply, jointing & testing, straight through joint kit complete with jointing material and accessories suitable for 1.1KV grade, LT, underground XLPE insulated armoured aluminium conductor, 3.5/4.0 core 10Sqmm to 16Sqmm size cable, complete all as specified and directed.

Taking out / down old existing LT 1100volt grade cables, size 10Sqmm to 25Sqmm, aluminium conductor 2, 3.5core, XLPE, armoured, laid in trenches, including bricks for protection, and stacking, removal to store for re-use or for credit, complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated , armoured, heavy duty, electric power cable, aluminum conductor 1100 volts grade under ground cable including both side connection with cable lugs etc, laid in trenches , along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed for the following size :- 25sqmm, 3.5 core,1100 volts grade

All as per Ser item No 18 here-in- before but LT Cable of Size 16Sqmm 4 core aluminum conductor 1100volts grade

All as per Ser item No 18 here-in- before but LT Cable of Size 10 Sqmm 2 core aluminum conductor 1100volts grade

Laying only for LT XLPE ,16 Sqmm 4 core Cable including jointing, testing and both side connection with cable lugs etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete all as specified and as directed. Note:- Cable will be issued under sch" B" free for laying only .

Supply and fixing/erecting in true vertical position, steel tubular pole, swaged, type 410-SP-31 (9.0m long), LT, complete with cast iron base plate of size 300mmx300mm, finial taper plug, bolts, nuts, washer and screws including painting with two coats of aluminium paint over one coat of red oxide primer on all exposed surfaces and tarring with black bituminous paints to portion embedded in PCC including numbering of poles with two coats of synthetic enamel paints and taking out old u/s pcc pole/steel with connected items complete all as specified and directed. Note : Excavation & earth work and PCC shall be measured and paid separately.

Material and labour, plain cement concrete (1:3:6) type C-2 using 40mm graded crushed stone aggregate, for foundation of poles, etc., complete all as specified and directed by Engineer-In-Charge.

M & L providing PCC 1:2:4 type B1, using 20 mm stone aggregate for laying PCC work at defferent locations/ installation including finishing the exposed faces of concrete even and smooth using extra cement complete all as specified and directed by EIC.

S & F 2.5Sqmm (nominal area) copper conductor, twin core, FRLS, PVC insulated unsheathed cable, drawn in steel pole for connection to street light fitting and making connections, including taking down old cable, complete all as specified and directed.

S & F bracket made out of GI pipe light grade 40 mm dia 1.50 mtr long duly welded with MS pipe 100mm dia ,30 cm long with holes, nuts, bolts and fixing on the top of pole complete all as specified.

S & F roadway LED light in Versatile pressure die cast aluminium road way luminaire with high power LED of 60 Watts including fixing arrangement clamps,bolts,nuts and brackets etc all as specified and directed. Crompton Cat Part No LSTP-60-CDL or equivalent in havells / wipro

S & F roadway LED light in Versatile pressure die cast aluminium road way luminaire with high power LED of 120 Watts including fixing arrangement clamps,bolts,nuts and brackets etc all as specified and directed. Crompton Cat Part No LSTP-120-CDL or equivalent in havells / wipro

M & L preparation of old surfaces of steel tubular poles and applying one coat of aluminium paint including two coats of synthetic enamelled paint of colour yellow and black alternatively hight upto 1.5 Mtr from ground level after preparation of old painted surfaces and writing the pole No (MES LT/HT) with letter size 1/2" x 3" on the road as per road marking electric rules and all as specified .

M & L strip painting to LT/HT poles of any sizes (PCC/RCC poles) with two coats of synthetic enamelled paint of colour yellow and black alternatively height upto 1.5 Mtr from ground level after preparation of old painted surfaces and writing the pole No (MES LT/HT) with letter size 1/2" x 3" on the road as per road marking electric rules and all as specified and directed by Engr-in-Charge.

Dismantling of highmast light from any height and any capacity including repairs to raising and lowering system of Hight mast light and repairs to double drum winch, proper checking of lubrication system checking and tightening of trailing cable repairs to remote for up and down of lantern carriage, fixing of Flood light luminaires with suitable bracket and making serviceable including base protection of highmast light all as specified and directed. Note:- (i) Replacement of defective parts accessories shall be measured and paid separately under relevant item of Sch 'A'. (ii) Transport and T & P i.e.Hydro crane, Ladder, spanners or any other eqpt for repair of high mast lights shall be provided by Contractor and cost for the same deemed to be included in respective item of Sch 'A'

S & F integral LED aviation light comprising of aluminium housing with polycarbonate enclosure, 302 nos. LED are provided with complete fittings and accessories complete all as specified and directed. Make : Bajaj (Model No BGAV 302 LED) and eqvt in make Crompton/Havells

S & F pole mounted CPRI approved sheet metal box of 1.6mm thick MS Sheet of size 25x20x12cm (inside dimenstion) including MCB single pole 6 Amps, 4 Nos aluminum bus bar of size 25mm x 3 mm thick fixed on porcelain post insuators with hinged cover and locking arrangement etc. powder coated, vermim proof, fixed to electric pole by means of MS flat iron 25x6mm with bolts and nuts. complete all as specified and directed.

S & F high efficient LED flood light of 150W Capacity with lens made of pressure dia cast aluminum housing, extruded aluminum heat sink & enclosed with toughened glass, IP 66 protection suitable for high mast light fitting with all necessary accessories complete all as specified. Make:- Crompton Cat Part No LFLN-150-CDL/60 or equivalent in Havells / Bajaj

Supply and installation of High intensity,long range UDCA mounted, Manual operated,LED search light,beam range min 500 meters,1 x 200W ,LED efficiency >130 lm/w,PF . 0.9 ,CCT 5000K-6500K,CRI>80,optical grade PC lens,Anti UV oxidation,narrow beam 8 degree,die cost LM6 body with air fins,fully power coated,working voltage 150-270V, 50Hz, constant current ,reflector,lens efficiency >85%,minmum lux 7000 at 5 Meter,IP- 65, confirming to LM79/LM80 (The Type-test report with photometry as per IS :10322 and IS : 13383 from Govt .lab suit be submitted) search light would be installed on "UDCA" stand (1 meter above from the roof) and the operating lever of UDCA would be in shoulder height to enable to rotate luminary easily from inside of the watch tower 350 degree in horizontal plane & vertical moment >30 degree built-in locking knob.All bushes of UDCA will be made by gun metal,hardware will be in SS and others metal parts would be Zinc electroplated/ power coated for outdoor installation and having 3 nos foundation holes at bottom complete including dismantling of existing search light and fixing accessories complete all as specified. Make:- Kalin (Cat part No :- RSL-LRFLL-25PC20

Supply and fixing LED Post Top lantern aestheticaly designed with die cast aluminium spigot & prismatic diffuser IP65 including fixing arrangements , bolts, nuts and service cable etc, complete all as specified and directed. Make:- Halonix Cat Part No. HLPT-06-20-CWE or equivalent in Appx 'B'.

Notes : (i) Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.

KULBHUSHAN AGGARWAL

MALHOTRA AND ASSOCIATES