Balance work of Design, Construction and Retrofitting of New/ Leftout works of Piped Water Supply Scheme under Jal Jeevan Mission at Village - Asrawad Bujurg Block Indore Distt. Indore

Balance work of Design, Construction and Retrofitting of New/ Leftout works of Piped Water Supply Scheme under Jal Jeevan Mission at Village - Asrawad Bujurg Block Indore Distt. Indore

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 m lead as per direction of engineer-in- charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) USOR. Item.no.16.15.1-P.no.209

Earth work in Excavationby mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. All Kind of Soil. USOR. Item.no. 16.4 -P.no.207

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. Soft rock with or without blasting or bituminous pavement / cement concrete road. USOR. Item.no.16.6(a)-P.no.207

Providing, Laying, Jointing & field testing of HDPE pipes, (High Density Polyethylene pipes) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) 90 mm dia HDPE 10 Kg/cm² SOR.Item.no. 9.1 -P.no.122

Providing, Laying, Jointing & field testing of HDPE pipes, (High Density Polyethylene pipes) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) 90mm dia HDPE 6 Kg/cm² USOR.Item.no. 9.1 -P.no.122

Providing, Laying, Jointing & field testing of HDPE pipes, (High Density Polyethylene pipes) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector of jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jack/Hydraulic Jacks/ Butt fusion machine. (50 mm & above fusion jointed & below 50mm mechanical jointed) 110mm dia HDPE 6 Kg/cm² USOR.Item.no. 9.1 -P.no.122

Providing butt fusion welded joint/joining by heating to the ends with the help of Teflon coated electric mirror/heater ends together etc. by thermosetting processes to HDPE Pipe and specials. (6 kg. 6 kg. 10 kg.) (50 mm & above fusion jointed & below 50 mm mechanica jointed) 90 mm dia USOR. Item.no. 9.7 -P.no.124

Providing butt fusion welded joint/joining by heating to the ends with the help of Teflon coated electric mirror/heater ends together etc. by thermosetting processes to HDPE Pipe and specials. (6 kg. 6 kg. 10 kg.) (50 mm & above fusion jointed & below 50 mm mechanica jointed) 110 mm dia USOR. Item.no. 9.7 -P.no.124

Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment , making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing,reaming and pulling back the new pipe on the designed bore path alignment , proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting Indian conditions. Required pipes/specials and other civil work shall be paid separately - In all types of soils. HDPE pipes of any class 90 mm outer dia. (USOR No 16.3 page 207)

Installation of HDPE pipe by Horizontal Direction Drilling Method including preparing and setting up the plant and equipment , making string of new pipe material, installing new pipe string and making the system ready for commissioning by HDD operation including drilling, stringing,reaming and pulling back the new pipe on the designed bore path alignment , proper disposal of drilling fluid, as per code of practice for horizontal direction drilling technique suiting Indian conditions. Required pipes/specials and other civil work shall be paid separately - In all types of soils. HDPE pipes of any class 110 mm outer dia. (USOR No 16.3 page 207)

Providing and laying mechanically mixed cement concrete 20 mm nominal size graded crushed stone excluding cost of centering and shuttering. In plinth and foundation M-15 (1:2:4) USOR. Item.no.16.23a.ii.-P.no. 210

Filling available excavated earth in trenches, lead up to 50m and lift upto 1.5 m in all kind of soil excluding watering and ramming. USOR. Item.no. 16.10b -P.no 208

Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electrofusion machine including all labour and material such as electrofusion Saddle, barss ferrule ( Not less than 100 gm in weight)/MDPE Ferrule /Flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/ GI Union 15 mm dia (medium class), brass/ SS tap etc all complete and all items/ fittings shall be complying with the relevant BIS codes. Rates also includes excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC are equivalent grade of existing CC cutting for providing tap connection (whichever is richer) construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe upto 5 meter and road crossing is not required. (Distribution pipe line is on the same side of house) U.S.O.R. Item No. 17.41.3 Second Ammendment

Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe upto 5 meter and CONCRETE ROAD CROSSING is necessary. U.S.O.R. Item No. 17.41.1 Second Ammendment

Providing and making Consumer Service Connection (Functional House Hold Taps Connection) from HDPE pipe with the help of electro fusion machine including all labour and material such as Electro fusion Saddle, brass ferrule (Not less than 100 gm in weight)/MDPE ferrule/flow control valve, double compression elbow, male/female threaded adopter with metal insert, sockets, MDPE union 20mm dia/GI union 15 mm dia (medium class), brass/SS tap etc all complete and all items/fittings shall be complying with the relevant BIS Codes. Rates also include excavation, cutting of road if required, refilling the trenches and restoration of road with minimum M-20 (1:1.5:3) grade CC or equivalent grade of existing CC cutting for providing tap connection (whichever is richer), construction of Platform and grouting of circular post neat finished as per the drawing attached, testing all complete items. For connection with 20 mm dia MDPE pipe more than 5 meter & upto 10 meter and CONCRETE ROAD CROSSING is necessary. U.S.O.R. Item No. 17.41.2 Second Ammendment

Providing and Supplying of HDPE Pipes in 300/500/600 mtr. Coils or in lengths. Grade PE 100, conforming to IS - 4984-2016 at store or at site. 40 mm dia. 8 Kg /sqcm USOR Item No. 9.15

Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motorUSOR. Item.no.24.20.108-P.no. 267

11 KV line on 140 kg. 8.0 Mtrs. Long PCC Poles with rabbit conductor average span of 70 mtr. in rural area. (Schedule Ref. C-1.2 of MPMKVVCL for SOR 2019-20)

One KM. L.T. LINES 3 PHASE 5 WIRE ON PCC SUPPORTS USING 1100 Volts Grade A.B. Cable 3 X 16+1x16+1x25 Sq.mm. XLPE WITH MAXIMUM SPAN OF 50 METERS (Schedule Ref. D-2.1 of MPMKVVCL for SOR 2019-20)

Please Enable Macros to View BoQ information