Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Ref. No.
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.4 LQualified 160 SHEKHUPURA COLONY ALIGANJ LUCKNOW UTTAR PRADESH 226022 | LUCKNOW | UTTAR PRADESH | 226022 | L1 | Qualified MSE, MII, Category: General | |
| 2 | L2₹27.6 L+₹1.1 L (4.20%)Qualified | L2 | Qualified MSE, MII, Category: General | |
| 3 | Disqualified 0 NIBAUA BHUJPURA KASGANJ ETAH UTTAR PRADESH 207246 | KASGANJ | UTTAR PRADESH | 207246 | - | Disqualified MSE, Category: General | |
| 4 | Disqualified | - | Disqualified MSE, Category: General |
Tender Value
Refer Docs
EMD Value
₹53,000
Closing Date
1 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CHAIR DINING
5073166
GEM/2023/B/3730180
Two Packet Bid
BOQ ITEM SERIAL NO 01,BOQ ITEM SERIAL NO 02,BOQ ITEM SERIAL NO 03,BOQ ITEM SERIAL NO 04,BOQ ITEM SE
180 days
Jammu And Kashmir; Jammu
Total value wise evaluation
BOQ
7 documents required · 7 mandatory
3 yrs
₹3
30%
₹53,000
1 Aug 2023
22 Jul 2023
1 Aug 2023
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) |
|---|---|---|---|---|---|---|
| 1 | BOQ ITEM SERIAL NO 01 | FD 279 CHAIR DINING
Overall size shall be 440mm long 440mm wide and 890mm high Front legs shall be of teak wood and 35mmx55mm in section and 460mm high Rear legs shall be of teak wood 35mmx55mm in section and 890mm high Front legs shall be joined withrear legs by teak wood seat frame which shall be of 30mmx55mm in section and made to shape as shown on drawing 20mmx200 teak wood stiffeners shall be provided on sides joining front and rear legs at 100mm from bottom of seat frame Two back rails of teak wood 20mmx45mm in section made to shape out of 30mmx45mm teak wood shall be profided between the rear legs as back rest Front and side rails of seat shall be of 30mmx55mm Came sja be pf re oer spr Sjaj bramd Cane shall be 2mm wide and 0 point 4mm thick half round gola type weighing not less than 6gms per ten running meter Caning shall be done in Godgrej pattern 25mm dia and 25mm high PVC shoes shall be provided to bottom of all legs All wood surfaces exposed to view when placed in position shall be given high gloss French polish with laccquer finiesh | 300 | Nos | Jammu | 180 |
| 2 | BOQ ITEM SERIAL NO 02 | FD MAP II 04 CHAIR DINING OFFICER
Overall size shall be 950mm high 450mm wide and 450mm deep The size of the legs shall be 40x50mm Front and side rails shall be of size 25x65mm Stifeners of size 20mmx25mm three in nos shall be fixed as specified in drg 75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply 75mm thick 40 density cushion of approved foam Kurlon sleepwell covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg Side frame of back of the chair shall be of section 40x50mm Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs The curved teak wood back shall be of section 30x45mm All sizes shall be taken as stated in specification irrespective of what is shown on drg All wood surfaces shall be lacquer polished with high gloss finish of walnut shade Rest all as per drg | 104 | Nos | Jammu | 180 |
| 3 | BOQ ITEM SERIAL NO 03 | FD 280 CHAIR WRITING
DIMENSION Overall size shall be 535mm long 470mm wide and 890mm high
DESCRIPTION Well seasoned teak wood throughout in frame work shall be used for framework Caning shall be done without any joint in the cane The cane shall be of 2mm wide 0 point 4mm thick half round gola type of shah equivalent brand The sides of the chair shall be canned with 4mm thick cane Hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs
FINISH All wooden surfaces shall be melamine polish with lacquer finish of walnut shade as approved by Engr In Charge Rest all as per drgs | 300 | Nos | Jammu | 180 |
| 4 | BOQ ITEM SERIAL NO 04 | FD 229 CHAIR EASY
DIMENSION Overall size shall be 510 mm long 575 mm wide and 720 mm high
DESCRIPTION All wood shall be first class teak MP Front legs shall be 30mmx55mm in section and 355mm high up to seat level Rear legs shall be of 30mmx55mm in section and 300mm high up to seat level and slanting 50mm away from vertical Front back and side rails of seat shall be out of 30mmx55mm in section and made to shape as shown on drawing front back and side rails shall join the front and rear legs at 355mm high and 300mm high in rear Teak wood arm rests shall be provided at 150mm above seat level and shall be of 30mmx55mm in section as shown on drawing Back rest shall be made of frame consisting of top horizontal rail of 30mmx100mm in section out of 60mmx100mm teak wood made to shape as shown on drawing and lower horizontal rail of back rest shall be of 30mmx100mm in section joined together by vertical side rails of 30mmx25mm in section teak
Wood to form the frame Caning shall be done with plastic cane of 2mm wide and 0 point 4mm thick half round gola type weighing not less than 6gms in ten running meters Caning shall be done in Godrej pattern PVC shoes 25mmx25mm shall be provided at the bottom of all legs
FINISH All wood surfaces exposed to view when placed in position shall be given high gloss French polish with lacquer finish | 15 | Nos | Jammu | 180 |
| 5 | BOQ ITEM SERIAL NO 05 | FD 355 BOOK CASE
Overall size shall be 1230mm long 300mm wide and 760mm high All wood shall be of first class hard wood teak MP The legs shall be made to shape out of 50mmx100mm teak wood The legs shall be 100mm high The two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case The two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails 19mm thick particle board commercial shall be provided at bottom top sides shelves and vertical partitions The back shall be of 6mm thick ply wood commercial The top shelves bottom and vertical partitions shall have 1 point 5mm plastic laminated sheet fixed over the particle board The vertical partition shall have plastic laminated sheet on both sides The shelves shall have plastic laminated sheet on top only The top and bottom of book case shall have plastic laminated sheet on top only The under side of top shelves and bottom shall be painted with two coats of white paint over a coat of primer after preparation of surfaces The sides shall have plastic laminated sheet on both sides The fornt edges of sides shelves vertical partition and top shall be covered with 3mmmm thick teak wood edging All wood and plywood surfaces exposed to view when placed in position shall be French polished with high gloss finish The places where plastic laminated sheet exists shal remain untreated | 1 | Nos | Jammu | 180 |
| 6 | BOQ ITEM SERIAL NO 06 | FD 52 MIRROR WITH SHELF
All as shown on drg Overall size shall be 600mm long and 230mm wide shelf shall be 19mm thick block board commercial with 1 point 5 mm thick plastic laminated sheet fixed on top 4mm thick teak wood edging shall be provided at all arounbd top of shelf except back touching plaster shelf shall be fixed on wall Fixing shall not be done by contractor Mirror shall be of 355mm wide and 455mm high 25x19 mm teak wood frame shall be provided all around the mirror Mirror shall be of 5 point 5mm thick float glass of Modi guard provided with 6mm thick commercial plywood BWP Backing Teak wood bioding out of 12x12mm in section cut 2 shape and fixed 12mm thick at bottom and sloping on size 3mm thick mild steel key plate as shown on Drg shall be provided on top corner at the back of mirror All wood surface exposed to view when placed in position shall french polished with high gloss finish | 10 | Nos | Jammu | 180 |
| 7 | BOQ ITEM SERIAL NO 07 | FD 277 PEG TABLE
DIMENSION Overall size shall be 450mm long 300mm wide and 380mm high
DESCRIPTION Legs shall be of teak wood of section 30mmx50mmThe legs shall be 362mm high 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs Two bottom rails of size 20mmx40mm shall be fixed between the legs A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg Top of table shall be of 18mm thick prelaminated MDF board of approved shade 4mm thick teak wood beading shall be provided alround the top edges of table
FINISH All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish Rest all as per drg | 26 | Nos | Jammu | 180 |
| 8 | BOQ ITEM SERIAL NO 08 | FD E6 MAP 14 STOOL DRASSING CUSHIONED
DIMENSION Overall size shall be 450 mm long 300mm wide and 380mm high
DESCRIPTION All wood shall be Ist class teak wood The size of the legs shall be of size 50mmx30mm The size of the three bottom stiffener shall be of size 19mmx25mm The size of the top rails shall be of size 25mmx65mm 12mm thick commercial plywood shall be fixed over the top rails for seat The seat of the stool shall be made of 75mm thick foam cushion of 32 density duly covered with best quality tapestry cloth Rest all as per drg
FINISH All wood surface exposed to view when placed in position shall be French polished with lacquer finish rest Rest all as per drg | 23 | Nos | Jammu | 180 |
| 9 | BOQ ITEM SERIAL NO 09 | FD 26 SIDE BOARD
Overall size shall be 1025mm long 450mm wide and 750mm high Back shall be 1025mm long and 750mm high prelaminated particle bd 18mm MDF Sides shall be 450mm wide and 675mm high prelaminated particle bd 18mm thick MDF Base shall be of 75mm high 18mm thick prelaminated particle bd 18mm thick MDF fixed at 25mm from front and sides Top and bottom shall be of 18mm thick prelaminated particle bd 18mm thick MDF A veticle partition of 18mm thick prelaminated particle bd 18mm thick MDF shall be provided at 358mm from inside of right hand side prelaminated particle board 18mm thick MDF Four drawers shall be provided equally in this space Three pieces of particle board 40 x 18mm and 358mm long shall be provided over the lower three drawers Bottom sides back of drawers shall be of 18mm thick particle bd The front of drawers shall be of 18mm thick prelaminated particle bd 18mm thick MDF 20mm x20mm teak wood bearers fixed exactly in centre of both sides of the drawers shall be provided to each drawer Another 20mm x 20mm teak wood bearer shall be fixed to the vertical of the side bd in such a way the the bearers fixed with the sides of the drawer shall slide over smoothly On left side compartment two horizontal shelves equally spaced shall provided as shown on drawing as directed by Engineer in charge All wood surfaces exposed to view when placed in position shall be given high gloss French polish with lacquer fininsh | 15 | Nos | Jammu | 180 |
| 10 | BOQ ITEM SERIAL NO 10 | FD 281 SOFA SET 4 SEATER
Overall size of one Seat shall be 670mm long and 745 mm wide and 530mm high up to arm rest level
The sofa set 4 seater shall consist of two single seats All wood shall be of first class teak wood Legs of sofa set shall be 70mm x35mm in section teak wood Front legs shall be jointed by 100mm x 35mm in section wooden rail in front Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides 100mm thick seat cushion and back cushions shall be of size 530mm x 560mm one numbers in seat and one numbers in the back The cushion shall be of cool foam or any other superior quality foam of 40 density as approved by Engineer in charge Cushion shall be covered with approved color tapestry cloth approved by GE not less than Rs 300 per meter or as directed by Engineer in charge
FINISH All wood surface exposed to view when placed in position shall be French polished with lacquer finish rest Rest all as per drg | 7 | Nos | Jammu | 180 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_5073166.pdf
GEM_BID
boq-fur-wdn_2023-07-22-12-24-07_bc2c36a5113e9f99b75bff7b1a9325fb.pdf
BOQ
boq_item_sample_file-fur-wdn7_2023-07-22-12-24-07_8b6e6b46856adf3a1b9b8708981825e7.csv
BOQ
gtc.pdf
OTHER
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .