Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC H NO 243 VARADARAJ NAGAR VIDYARANYAPURA POST BANGALORE 560 097 | BANGALORE | BANGALORE | KARNATAKA | 560097 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹10.0 L+₹1.7 L (20.1%)Rejected-Finance NO 6 NJ BUILDING GANGAMMA TEMPLE ROAD JALAHALLI POST BANGALORE 560 013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | L2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | L3₹11.1 L+₹2.8 L (33.6%)Rejected-Finance | L3 | Rejected-Finance BEING NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹15,600
Closing Date
14 Sept 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I AF CHIMNEY HILLS BANGALORE
Asst Garrison Engineer I AF Chimney Hills Chikkbanavara Post Bangalore, PIN- 560 090
PROVN OF CERTAIN MINOR WORKS (MW No. 01 to 04) AT 58 AF STATION CHIMNEY HILLS
2022_MES_545634_1
8540/E8
Open Tender
Civil Works
Item Rate
90 days
AGE I AF CHIMNEY HILLS BANGALORE
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
AGE I AF CHIMNEY HILLS BANGALORE
₹15,600
Yes
12 Jan 2023
17 Aug 2022
15 Sept 2022
17 Aug 2022
14 Sept 2022
31 Aug 2022
17 Aug 2022 - 24 Aug 2022
Amount
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in hard/dense soil.
M&L for cement concrete type B2 1:2:4 (40 mm graded aggregate) in post holes.
M&L for framed work such as grills, gratings, gates etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar works including fixing to channel section using MS bearing hinges to frame confirming to Fe-290 grade-E-165.
S&F for steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.or induction butt welded to angles, cleats conforming to I. S.1161-1979 grade St.-240
S&F for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality A.
M&L for Granite of any type tiles 20 mm thick machine cut as in steps ,cooking plateform and the like , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 20 mm thick cement screed bed in CM 1:4 all as specified and as directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
Surface excavation not exc 30 cm deep and avaraging 15 cm deep and getting out soft/loose soil
M&L Hard core of gauge n exc 63 mm broken stone deposited, spread and levelled in layers n exc 15 cm thick, watered and well rammed to a true surface.
M&L for providing 75 mm thick Cement Concrete type D-2, 1:4:8 (40 mm graded stone agg) as in sub base to floors.
M&L for providing 100 mm thick Cement Concrete type B-1, 1:2:4 (20 mm graded stone agg) as in floor etc,
M&L precast cement concrete block masonry with solid blocks exc 10 cm in width type C1 1:3:6 ( 20mm graded aggregate) set in CM 1:6.
M&L Rendering 10mm thick in CM 1:6 on fair surfaces of concrete surfaces finished even and smooth without using extra cement.
M&L Preparation of new plastered surfaces of wall by washing, rubbing down and stopping of painted surfaces and applaying two coat of cement based paint.
M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over red oxide.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and as directed.
Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth in soft/loose soil and getting out.
M&L Cement concrete type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete
M&L precast cement concrete block masonry type C-1 1:3:6 (20 mm graded stone aggregate) with solid block, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.
Returning, filling in including spreading levelling watering and well ramming, in layers, not exc 25 cm of hard/dense soil
Removing of excavated materials n.exc 50M and deposing where directed at a level n.exc 1.5M above the statring point
M&L rendering 10 mm thick, cement plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces
M&L rendering 15 mm thick, cement plaster in cement mortar 1:4 on other side of lathing of brick work or concrete surfaces
M&L cement concrete 1:2:4 type B1 using 20 mm graded aggregate as in flooring benching to drain, coping, bed block etc and the like edge slightly rounded or chamfered including necessary use and waste of form work complete all as specified and directed.
M&L for preparation of newly plastered or un plastered surfaces of walls and applying 3mm thick wall care putty on internal surfaces of walls, rubbing with sand paper to achieve a level and smooth surface including two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.
S & F fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc.
M&L PCC 1:3:6 type C2, 75 mm thick laid as in plinth protection/paving etc finished even & smooth with out usnig extra cement .
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling.
S&F power coated anodised aluminium door, window and ventilator shutters sliding/hund type, without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.
S&F of 5 to 5.50mm thick glass for fixing in aluminium door and Window, partitions etc complete all as specified and as directed.
S&F for 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work etc complete all as specified and directed.
S&F for Aluminum (extruded section ) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.
Supply and fixing of wooden partition of 12 mm thick plywood size 1.00 mt X 0.70Mt , grade BWP, type BB, fixed incl decorative laminate type , 0.9 mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions with 6mm thick external teak wood lipping/ beading and and applying two coat of french polish over the beading incl preparation of surface and fixed with nails to walls complete all as specified and as directed.
ANAND REFRIGERATION
JM Engineering
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .