Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹64.0 L
EMD Value
₹1.3 L
Closing Date
6 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Overhaul Division, Nasik
Aircraft Overhaul Division, Nasik
Repair of RCC Chajja, Cantilever slab, fins of various building in factory area of HAL Nasik
9210
NK/FW/C-1588/2024-25
Works
Mig Complex - Aircraft Overhaul Divn - Nasik - Works - Contracts
₹0
₹1.3 L
6 Sept 2024
8 Aug 2024
8 Aug 2024
6 Sept 2024
Name of the Individual / Firm / Company: * Mandatory
Type of ownership
Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, etc.
Address for Correspondence:
PAN No.:
Contact details
I.T Returns for past 03 years (Assesment Year)
Related Document to be Uploaded to e-procurement portal.
Annual financial turn over during the last 3 years (Financial Year), ending 31st March 2023 [Annual financial turn over during the last 3 years should not be less than 30% of the estimated amount put to tender.]
Turn Over (Rupees in Lakhs)
ESI, GST & PF Nos. with proof
Related Document to be Uploaded to e-procurement portal.
Bank(s) details: [Annexure E-5 to be uploaded in original]
Related Document to be Uploaded to E- Procurement Portal. (Note:Original ECS dully sealed and signed by Bank along with cancelled cheque to be uploaded)
Latest Bankers Solvency Certificate from Nationalized or Scheduled Bank issued within a period of 12 months from the final date of Submission of Tender. (Should not be less than 40% of the Approx. estimated amount put to tender.)
Related Document to be Uploaded to e-procurement portal.
Experience of having successfully completed similar works "(As per "Work Details" table of Etender notice) ." during last 7 years ending on previous day of last day of submission of tender should be either of the following. [Latest work experience (completion) certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost of Amount put to the tender OR (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost of Amount put to the tender OR (iii) ONE similar completed work each costing not less than the amount equal to 80% of the estimated cost of Amount put to the tender
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
Type of Work: [ Incase of private works the same shall be supported with TDS certificate]
License for execution of Electrical works and other specialized works from the concerned authorities /organizations/bodies (applicable for Electrical works combined with Civil works)
Details of person holding the power of Attorney (If different from contact person)
Related Document to be Uploaded to e-procurement portal.
Acceptance by party for Scope of work as per BOQ and Tender terms & conditions
DECLARATION
Please write "Accepted/ Not-accepted"
DECLARATION
Please write "Accepted/ Not-accepted"
Specification
Dismantling carefully the existing reinforced cement concrete of any description and in any position including cutting the reinforcement wherever required, including trimming the sides and stacking at site for further disposal complete as per direction of EIC/OIC.
Taking down/ removing, Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately) as required including transporting to the Civil stores or stacking at site for re-use complete as per direction of EIC/OIC.
Demolition and dismantling carefully the existing brick/stone masonry built in cement mortar at any position. Separation of serviceable materials from the unserviceable; stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as per direction of EIC/OIC.
Taking down old cement plaster of any proportion including small patches, bands, etc., in any position from brick/stone masonry/concrete surface including cleaning, removing the debris to a distance not exceeding 100m complete all as specified and as per direction of EIC/OIC.
Providing and casting in situ plain cement concrete 1:2:4, Type-B-1 using 20 mm graded stone aggregate for foundation including mixing, placing in position, compacting, curing, complete as per direction of EIC/OIC.
Providing centering & formwork for plain or reinforced cement concrete straight, horizontal, sloping as required including all cutting & waste, centering, bracing, strutting and removing the form after the retention period complete as specified & as per direction of EIC/OIC. For Chajja.
Providing and casting in situ reinforced cement concrete 1:1.5:3 using 20 mm graded stone aggregate including mixing, placing in position, compacting, vibrating, curing, finishing the exposed surface of concrete smooth/hacked complete all as specified and as per direction of EIC/OIC. For Chajja (MS reinforcement and form work will be paid seperately).
MS Reinforcement.....Providing and laying in position TMT deformed MS reinforcement plain or tor cut to required length bent to shape, incl. binding with MS wire (annealed) not less than 0.9 mm Dia. Or securing with clips complete all as specified and as per direction of EIC/OIC.
Providing and constructing of brick wall in CM 1:4 scaffolding, curing etc. complete as specified and as per direction of EIC/OIC. (Bricks should be 35kg/Sqcm)
Providing and constructing half brick masonry straight or curved at any height and level above or below ground level using best quality well burnt bricks in cement mortar 1:4 including necessary scaffolding for working at all levels and height mixing of mortar curing complete as specified and as per direction of EIC/OIC. (Bricks should be 35kg/Sqcm)
Only constructing uncoursed random rubble masonary wall at any height and level above or below ground level using HAL stones, bonded, beded and solidly hearted in cement mortar 1:6 including provision of bond stones/precast concrete bond stone @ 2no per meter square of size minimum 150 mm X 150mm and to full width of wall in cement concrete 1:6:12 using 20 mm and down graded srtone aggregate placed at staggered position, corner stones wherever required, including removing mortar and cleaning stones obtained from dismentaled masonary, necessary scaffolding for working at all levels and height, curing complete as specified and as per direction of EIC/OIC.
Providing raised pointing to UCR masonary in CM 1:3 including racking out joints not less than 10 mm deep, scaffolding,curing,cleaning as specified and as per direction of EIC/OIC.
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls of brick work or concrete surface in cement mortar 1:4 with curing and cleaning etc including disposal of rubbish to the dumping ground, all complete as per direction of EIC/OIC.
Providing and rendering 12 mm thick plain cement plaster in cement morter 1:6 on fair faces brick work or concrete surface including providing neeru finish to finish to smooth and even surface & curing etc complete as specified and as per direction of EIC/OIC.
Providing and Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new/old surfaces including necessary preparatory works such as brooming & brushing down with wire brush , washing down with water including scaffolding for working at any height & level , cleaning complete all as specified and as per direction of EIC/OIC on old surface. ( Note:- 1. The scope of work includes providing and filling the cracks of any description , wherever necessary on the building surface being painted, at all levels, using acrylic / polymer or silicon based crack sealing chemical as approved including necessary preparatory works such as, cleaning and widening as specified and directed)
Providing, fabricating, hoisting & erecting in position Tubular steel work made out of tubular sections including special shaped washers, welded or bolted type for frame work for partition / roof trusses, purlins, bracing as per drawing or/ and as directed by Engineer Incharge. Including Providing and applying a coat of Zinc Chrome primer of approved quality complete all as specified and as per direction of EIC/OIC.
Painting with two coats of approved quality and shade synthetic enamel paint of approved brand to give an even shade complete all as specified and as per direction of EIC/OIC.
Providing and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified (size, shape and pitch of corrugation as approved by Engineer-in-Charge) with zinc coating min 120 grams per sqm as per IS: 277, Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as per direction of EIC/OIC. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5 x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Supplying and applying the approved quality and brand the rust converting chemical solution on the existing old deteriorated reinforcement from surface of building including removing the loose rust with wire brushing cleaning the surface including necessary form work for working at any height and applying the rust converting chemical solution as per the manufacture’s specification (The actual consumption will be considered for the payment) all complete as per direction of EIC/OIC.
Providing and applying approved quality and brand the effective bond coat of polymer (SBR) on the exiting surface of building/old concrete or repaired concrete surface such as beams, columns, slabs, chajjas, fins, parapet wall etc. In 1:1 proportion (cement bond liquid )including the preparing the surface and applying with the brush in multiple coats as per manufactures specification (The actual consumption will be consider for the payment)all complete as per direction of EIC/OIC.
Providing & applying in position the approved quality and brand cementitious repair mortar for structural repair of damaged concrete and adding the water as per manufacture’s recommendation including mixing the polymer midified mortar (Sika/Asian paint/Fosroc) with water applying on the surface to be treated the scope of work includes preparing the existing surface by loosening the old deteriorated concrete surface. Cleaning with water and working at any height including scaffolding etc.(The actual consumption will be considered for the payment)all complete as per direction of EIC/OIC.
Providing and fixing Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in gutter , fixed with self tapping screws as specified size, shape as per direction of EIC/OIC with zinc coating min 120 grams per sqm as per IS: 277 etc complete excluding support structure paid seperately. Gutter (600 mm overall girth)
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes all as per direction of EIC/OIC.
Providing and fixing 4.00 mm thick Aluminium Composite Panel (ACP) consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each .05 mm thick). of approved colour and brand for external cladding in combination of solid/ metallic/ rustic/timber colours including complete weather sealing as per drawing. The work to be carried out horizontal and vertical surface at all height and elevation with different shade of panels. The shade will be as approved by the EIC/OIC. The Aluminium composite pannel should be of make Aludecore/ Alucobond/ Timexbond/ Eurobond or equivalant etc. as specified & approved by EIC/OIC. Grade of Aluminium skin -AA1100 . The Fixing of panel to be done with the help of VHB/Lohmann Tapes and screws and all the sealing of joints to be done with weather sealent silicon. Note: The supporting base framework of aluminium/steel sections will be paid seperately. The Rate includes required all scaffolding, ladders, plant, templets, cradles including hoisting and lowering.
Rupees Fifty Four Lakh Twenty Two Thousand Three Hundred Twenty and Eighty Eight Paise Only
Approximate Basic Amount Put to Tender
Rupees Nine Lakh Seventy Six Thousand Seventeen and Seventy Five Paise Only
Rupees Sixty Three Lakh Ninety Eight Thousand Three Hundred Thirty Eight and Sixty Four Paise Only
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Etendernotice.pdf
TENDER_DOCUMENT • 0.47 MB
Prequalification_profile_Chajja.xlsm
TENDER_DOCUMENT • 0.01 MB
Tender_Document1588.pdf
TENDER_DOCUMENT • 1.63 MB
ECSDetailsForm.PDF
TENDER_DOCUMENT • 0.16 MB
PriceBid_chajja.xlsm
TENDER_DOCUMENT • 0.08 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .