Carrying out Zone works for period ending 30.06.2027 on Zone No- 26A Kathgodam Railway colony.

B-Item of CPWD HORTICULTURE DSR 2020 50000.00 Below/P

Item Breakup - C-NS Items

Hire charges of TATA 407 or equivalent for local Day shifting.

Hydraulic Excavator of 1 cum bucket.

Hire and running charges of light crane.

Hiring of Tractor with trolley. Total 224554.00

Item Breakup - D-NS Items

Artisan (Blacksmith 2nd class, Carpenter 2nd Day class, Mason 2nd class & Painter Etc) IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Helper (Technician) Total 2063040.00

Item Breakup - E-NS Items

Stone Aggregate (Single size) : 12.5 mm nominal cum size

Portland Cement (OPC-43 Grade)

Oxidised mild steel sliding door bolt 300x16 mm

Oxidised mild steel sliding door bolt 250x16 mm

Oxidised mild steel tower bolt (barrel type) Each 200x10 mm

Oxidised mild steel tower bolt (barrel type) Each 150x10 mm

Oxidised mild steel handles 125 mm

Oxidised mild steel handles 100 mm

Oxidised mild steel handles 75 mm

" Block board construction flush door with Sqm commercial ply on both faces30 mm "

Coarse sand (zone III)

" Synthetic enamel paint in black or chocolate Litre shade "

Synthetic enamel paint in all shades except black Litre or chocolate shade

Mirror of superior make glass 60x45 cm

Vitreous china pedestal for wash basin

"G.I. Union 15 mm nominal bore"

G.I. Union 20 mm nominal bore

G.I. Union 25 mm nominal bore

"Polyethylene water storage tank with cover and Litre suitable lockingarrangement

Vitreous china flat back wash basin 550x400 mm Each

Hydraulic door closer tubular type Aluminium Each section body

Vitreous china orrisa type W.C. pan of size 580 Each mm

Floor mounted white vitrous china double trap Each syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc

"12 mm commercial ply "

Galvanised wire mesh of average width of Sqm aperture 1.4 mm and nominal dia of wire 0.63 mm

High intensity retro - reflective sheet as per IRC Sqm 67-2001

1.0 mm thick decorative laminated sheet

20 mm dia PTMT stop cock

15 mm dia PTMT stop cock (male thread)

Unplasticised P.V.C. connection pipe with brass Each union 45 cm long 15 mm bore

H.P. or L.P. ball valve with polythene floats: 15 Each mm dia

H.P. or L.P. ball valve with polythene floats: 20 Each mm dia

H.P. or L.P. ball valve with polythene floats: 25 Each mm.

C.P. brass waste 32 mm

C.P. brass waste 40 mm each

C.P. Brass angle valve 15 mm IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

C.P. Brass bibcock 15 mm

C.P. Brass long nose bibcock 15 mm

C.P. Brass long body bibcock 15 mm

Stainless steel butt hinges 125x64x1.9 mm IS : 10 Nos. 12817 marked

Stainless steel butt hinges 100x58x1.9 mm IS : 10 Nos. 12817 marked

Stainless steel butt hinges 75x47x1.8 mm IS : 10 Nos. 12817 marked

Stainless steel kitchen sink - without drain board Each 610x460 mm bowl depth 200 mm

15 mm PTMT bib cock

15 mm PTMT bib cock with flange (fancy

15 mm PTMT bib cock long body with flange

PTMT pillar cock

U-PVC pipes (working pressure 4 kg / cm²) Single Metre socketed pipe 75 mm dia

U-PVC pipes (working pressure 4 kg / cm²) Single Metre socketed pipe 110 mm dia

UPVC bend 87.5° 75 mm bend

UPVC bend 87.5° 110 mm bend

Semi Rigid PVC waste pipe for sink and wash Each basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Semi Rigid PVC waste pipe for sink and wash Each basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings

Flexible (coil shaped) PVC waste pipe for sink and Each wash basin 32mm dia with length not less than 700 mm i/c PVC waste fittings

Flexible (coil shaped) PVC waste pipe for sink and Each wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings

Flushing Cistern P.V.C. 10 litre capacity (low Each level) (White) (with fittings,accessories and flush pipe)

UV stabilised 2 mm thick plain FRP sheet

UV stabilised 2 mm thick corrugated FRP sheet

8 mm dia C.P. Brass/ S.S. Jet with flexible tube Each upto 1 metre long with S.S. tringular plate for Eureopean type W.C.

18 mm thick block board with commercial ply Sqm veneering on both side

White cement based putty Total 323266.96

Item Breakup - F-NS Items

Supplying and fixing of Armstrong false ceiling Each panel size 593.3x593.3x14mm

Providing and fixing of armstrong False ceiling (R- Sqm 04-98) I/C all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site

Prov & fixing PVC wall panelling 7mm thick Sqm (200x300mm) complete in all respect. IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Providing and fixing PVC false ceiling tiles of Sqm required size in true horizontal/vertical levels suspended on interlocking MS tube grid of section 25mmx25mmx1.2mm. PVC ceiling tiles should have a section size of 6mmx250mm with wall thickness of 0.8mm. Perimeter edge of tiles shall be covered by extruded PVC corner beeding of size 9mm x 8mm x1 mm. MS tube section grid should be properly secured with walls and anchored to roof with the help of suitable clamps with complete work

Manufacturing aluminium sheets 0.91 mm thick (Hindalco or similar make) ridges and NL curve of reqd.shape and size as directed by engineer-in -charge at site.

Supplying, erecting and laying position 3 mm Sqm thick plain embraced polycarbonate sheets of approved and transparency on the roof in the profile to much the profile of roofing sheets etc.

Supplying & fixing of 6 mm thick polycarbonate Sqm sheet LEXAN or similar multiwall etc complete

Providing and fixing 1.0mm thick MS sheet in roof Sqm

Supplying & fixing Unibrick tiles(Unistone ) Sqm cladding on walls with 10 mm thick base of CM 1;1 complete

Providing and polishing on surface of unibrick Sqm tiles withready made mirror polish of approved brand and manufactured, new with two or more coat, including all cleaning of surface labour , material and including all taxes , levies etc

Polishing wood work with melamine polish in Sqm approved thinner and finishing as per satisfaction of site engineer. The malamine polish used should be liquid base and and of approved make i.e. Asian/ Nerolac/ Jonson etc. The rate including all taxes, labour charges, material, T & P levies tc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site

Providing ,fabricating ,fitting & fixing in position 6 Sqm mm thick toughened glass in doors ,window & north lights at all levells including cutting etc.

Providing hand packed dry flat brick flooring, Sqm class designation 7.5 (FPS Bricks), excluding pointing with joints filled with sand over a bed of dry sand (ordinary) of average thickness 25 mm including ramming sub grade (Flat Brick)

Providing and applying water proofing treatment Sqm to RCC roof slab etc. by application of two coats of cement slurry mixed with water proofing compound (Acrylic based polymer,solid cintent 30% ± 3, pH >7) in the ratio of 1:2 (1 part of water proofing compound :2 parts of cement by weight), followed by tow coats of single component moisture cured polyurethane based elastomeric water proofing coating conforming to ASTM C-836-89 having tensile strength 3.1 N/mm² . topping layer of 25 mm thick cement concrete 1:2:4 (to be paid separately) to be laid

Sealing of cracks in roofs by making a V-shaped Metre groove and filling the groove with acrylic-strene based copolymer waterproofing compound

Supplying,Erecting & fixing in position 150 mm Metre dia PVC Rain water pipes of appd. Quality where ever reqd.complete inside the ways of diesel shed up to 9.0 mtr.height in shut down period complete with all labour IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Brick work with Railway bricks in foundation and cum upto plinth with 1:6 cement mortar (1 cement : 6 Coarse sand)

Brick work with Railway bricks above plinth level cum and upto floor V level in all shapes and size with 1:6 cement mortar (1 cement : 6 Coarse sand)

Supplying, erecting and fixing precast concrete Each reinforced bench with back rest. Bench shall consist of 2 nos. L shaped base support in natural cement colour of thickness 100 mm, back height 1000 mm, front height 450 mm, base width 620 mm and 5 nos. reinforced concrete planks in red colour and size of 1500 x 100 x 50mm and 1 no. reinforced concrete plank of 150 x 200 x 50mm; manufactured by using M-30 grade concrete & reinforced suitably; all parts to be joined with galvanised nuts and bolts of suitable size. All bolts to be sealed after assembly. Complete job to be done as per directions of Engineer Incharge.

Supply of WEEDICIDE Glyphosate medicine. Total 517346.35

Item Breakup - G-NS Items

Prov & fixing CP Brass Basin hole mixture Each Hindwaare or similar.

Prov & fixing CP brass WALL MIXER with Each telephonic shower 15mm dia ISI mark, Superior quqlity heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site

Supplying fitting and fixing of 15mm dia C P Each brass pillar tap long body (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Supplying and fixing C P brass hand faucet Each shower of MARC make or equivalent

Supplying fitting and fixing 15mm dia CP brass Each short body bib cock (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Supplying fitting and fixing 15mm dia CP brass Each longt body bib copck (Jaguar or equivelent make) of approved quality with all taxes including all labour T & P complete etc as per direction of engineer incharge/architect at site

Providing and fixing CP brass angle valve (ideal Each orient or equivelent make) complete fitting T & P levies etc.complete as per direction of engineer incharge/architect at site

Supplying and fixing Health faucet jaguar or Each similar make

Providing and fixing CP brass wash basin mixer Each 15mm dia of ISI mark, superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site IZZATNAGER DIVISION-ENGINEERING/NORTH EASTERN RLY

Supplying and fixing C P brass Over Head shower Each of MARC make or similar

Providing and fixing ractangular counter wash Each basin with 15mm dia CP brass pillar tap of MARC,equivalent make of superior quality heavy type of approved design including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site

Providing and fixing Wall hanging W C italian Each type with concealed cistern with SS botton, superior quality, (Hindware, pairware etc) including all lead, lifting at any ht. Loading unloading all taxes, labour charges, material, T & P levies etc.complete job nothing extra will be paid what so ever the case may be as per direction of engineer incharge/architect at site Total 52246.48

Item Breakup - H-NS Items

Removal of trees with roots from the wall.

Painting and lettering gradient post, Km posts, Each curve plates boundary pillar etc two coats both sides along the Railway track.

Painting station name Board both sides. ( Area Each upto 2.00 Sqm)

Painting station name Board both sides. ( more Each than 2m)

Annual maintenance of aqua 15Lt/Hour.RO water Each purifier(domestic) AMC , Unit of this item is each per annum Total 10000.18