Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.6 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹56.0 L+₹3.1 L (5.89%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹56.8 L+₹3.9 L (7.46%)Rejected-Finance 0 MANPUR CHITBARAGAON CHITBARAGAON BALLIA UTTAR PRADESH 221713 | BALLIA | UTTAR PRADESH | 221713 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹58.5 L+₹5.7 L (10.7%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹60.2 L+₹7.4 L (14.0%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹69 L
EMD Value
₹1.3 L
Closing Date
14 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Rajouri
HQ CWE Rajouri PIN 900129 C/o 56 APO
SPECIAL REPAIRS TO BUILDING NO P-12 and P-13 AT INF BDE CAMP AND BUILDING NO P-60 (OFFRS MESS) P-39 and P-40 OF STN HQ NAUSHERA AND SPECAIL REPAIR OF OVERHEAD CONDUCTOR TO UG LT CABLE AT LAM BASE UNDER GE 862 EWS
2023_MES_634582_1
CWE/RAJ-50/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE 862 EWS
As per Tender Documents
9 documents required · 9 mandatory
₹1,000
GE 862 EWS
₹1.3 L
Yes
18 May 2024
27 Dec 2023
20 Feb 2024
27 Dec 2023
14 Feb 2024
31 Jan 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below of above GL) and removing out side MD land complete all as specified & directed.
M&L for Cement concrete type C-1, 1:3:6 (20mm graded aggregate) 50 mm thick as in plinth protection complete all as specified & as directed.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified & directed.
S&F vitrified ceramic tiles light shade of size 600x600x10 mm thick as in floor set and jointed in neat cement slurry and pointing in white or coloured cement to match the colour of tiles over and including screed bed 15 mm thick in CM 1:4 complete all as specified & directed
M&L for Machine cut kota stone slab flooring 20-25 mm thick in floors and jointed with grey cement to the shade of the slab including machine cutting to make it square or rectangular rubbing gan cutting and polishing to achieve mirror finish laid over and including screed bed or bedding layer of 20mm thick in cement mortar (1:4) after dismentling / demolition of old unserviceable kota stone of any size complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm and n. exc 4.00 sqm complete all as specified & directed.
Taking down chowkats or frames n.exc 1.5 Sqm each (w/o taking off shutters from the frames ).
S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc, complete all as specified & directed.
S&F Plain framed, panelled shutters (any number of panels) with pannel of timber flat on both sides (feather edged) or of veneered particle board with commercial face veneers 35 mm thick 2nd class hard wood supplied and fitted to chowkats complete all as specified & directed
S&F 35 mm thick second class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges for receiving glass etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) but divided into square ,with plain,chamfered and rebated sash bar complete all as specified & directed.
S&F Factory made MS tubular Box type window of MS rolled steel section conforming to IS-1038 and shall be ISI marked manufactured by ISI approved manufacturer, openable frames shall be fabricated of sections as approved by Engr-in-Charge corner welded to form a solid fused welded joint handles shall be of z section welded with openable frame box steel section(Consisting of both shutter glazed shutter and gauge shutter complete) used in outer frame shutter frame and central frame shall be ERW secton of 16 gauge with fixing lugs to be fixed as per provision of IS-1038 except that top lugs shall not be provided , all shutters of windows shall be provided with 4 Nos friction free hinges, 2 Nos 75 mm tower bolts to each leaf of window one at top and one at bottom welded on 3 mm thick steel sheet piece of suitable size which shall be in turn welded to z section f steel window to provide suitable arrangement of using tower bolt and 1 nos bow handle in each shutter. Glazed shutter and , gauged shutter of window , mild steel casement stays 300 mm with hinged joint and two plates with studs complete all as specified with all fittings and fixtures without glazing bars, 3mm sheet glass in glazed shutter and , GI wire mesh,of 0.56 nominal dia and average width of aperature 1.18 mm in gauged shutter, etc complete all as specified and as directed.
Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quoins , arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed.
M&L for walling of random rubble masonry, uncoursed , well bonded , bedded and solidly hearted built in cement mortar in 1:4, complete all as specified and as directed.
All as per srl item No 13 above but except stone, complete all as specified & directed.
Taking down Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified & directed.
S&F pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws//"L" or "J" hooks all as specified and directed.
Taking down cement plaster on stone walls or brick walls, including racking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed.
M&L for applying water proofing/damp proofing treatment to wall surface with smart care Damp block or other equivalent from Fosrock/Asian paints/Sika/Pedilite by elastomeric cementious coating including all necessary surface preparation, etc complete all as per manufacturer’s specification and application methodology. The coating shall be applied in two coats achieving a total thickness of 1.00mm complete all as specified & directed
M&L for applying elastomeric acrylic fibre reinforced water proofing/damp proofing treatment and anticarbonation coating with smartcare damp proof materials or other approved equivalent from Fosrock/Asian Paints/Sika/Pedilite on wall surface area, minimum elongation of 300% and shall have crack repair ability, complete all as specified & directed.
M&L for rendering 15mm thick in CM 1:6 on brick or stone masonry surfces of wall, finished even and smooth without using extra cement, Complete all as specified & directed.
M&L for rendering 15mm thick in CM 1:4 on stone masonry surfces of wall, finished even and smooth without using extra cement, Complete all as specified & directed.
Demolition of reinforced concrete any description and in any position not otherwise specifically provided for complete all as specified & directed.
M&L RCC (1:1.5:3) type B-1 using 20mm gradded stone aggregate as in beams, deck slabs , chajjas and in shelves and like, complete all as specified & directed.
M&L Formwork to sides and soffits of floor or roof beam , beam hunching, girders, lintel, cantilevers, shelves including suports,overhangs etc, complete all as specified & directed.
M & L for mild steel TMT bars 10mm dia and over , cut to length ,bend to shape required, including cranking ,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified & directed.
Anodised aluminium frame for doors , windows , ventilators , partition frame including jointing cleats for fixing etc complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters side hung , sliding type aluminium section weighing 0.55 Kg / m including necessary jointing cleats , glazing clips ruber , neoprane , packing anodised aluminium snap beading , screw , anodised aluminium fitting such as peg stays 150 mm long (01 Nos ) hinges type B21 100 mm long (02 Nos 0 suitable handle 01 no complete all as specified & directed.
S&F Anodised aluminum door shutters side hung, sliding type aluminum section weighing 0.55kg/m including necessary jointing cleats, glazing clips ruber neoprane, packing anodised aluminum snap beading, screw, anodized aluminum fitting such as butt hinges 150mm long 3 Nos, aliminium 300mm long handle 02 Nos complete all as specified & directed.
S&F for plain ACP board 5 mm thick, fixed in aluminium joinery including cutting, packing, finishing, complete all as specified and directed.
S&F 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified & directed.
S&F 2nd class hard wood small fitting such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary laboures articles n.exc 200cu.cm each, complete all as specified & directed.
M&L for PCC 1:2:4 type B-1 using 12.5 mm graded aggregate coping, benching, plinth band, bed blocks for hold fast incl rounding or chamfered angles as directed incl necessary form work complete all as specified & directed.
S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.14 mm and fixed with tinned tacks of galvanised wire staples complete all as specified.
S&F Aluminium handles, cast type, anodised 150mm long, complete all as specified & directed.
S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size 200 mm long
S&F aluminium alloy anodised sliding door bolt with fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed of size 200 mm, complete all as specified & directed
M&L for Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & directed.
M&L for 2 coats of synthetic enamel paint on wood and wood base surface or any description not otherwise described, over 10 cm width or girth over a coat of pink primer incl preparation of surfaces, complete all as specified & directed.
S&F in repair Harrison rails , anodised aluminium alloy chromium plated with fixing brackets , stops ,rollers etc, complete all as specified & directed.
M&L for PCC 1:3:6 type C1 (20 mm graded aggregate ) as in surface channel, drain and similar wk all as specified and directed.
S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps including bends and tee joints all as specified and directed .
M&L for APP based polymeric membrane minimum weighing 3 kg / sqm and minimum 3 mm thick reinforced with polyster non wooven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified incl priming surfaces and applying normal treatment ( for moderate conditions) using glass fibre base bitumen felt , grade-2. incl removal of existing treatment all as specified & directed.
M&L for rendering 5mm thick in CM 1:3 on concerete surfces of ceiling finished even and smooth without using extra cement, complete all as specified & directed.
M&L for applying two coats of cement base paint on new plastered surfaces of wall including preparatory work, complete all as specified & directed.
M&L for applying two coats of oil emulsion distemper over a coat of wall putty including preparation of surfaces on newly plastered surfaces of wall.
M&L for applying two coats of oil emulsion distemper including preparation of surfaces on newly plastered surfaces of ceiling complete all as specified & directed.
M&L for applying one coat of oil emulsion distemper including preparation of old plastered surfaces of ceiling, complete all as specified & directed.
Complete removal of existing treatment over walls and applying two coats of cement base paint complete all as specified and directed.
Complete removal of existing treatment over walls and preparation of surfaces to receive the treatment and applying two coats of distempering oil emulsion complete all as specified & directed.
S&F steel ventilators with top hung shutter incl hinges steel peg stay complete all as specified & directed.
Glazed coloured ceramic tiles 450x 350 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces over 10mm thick cement mortar screed bed 1:4 complete all as specified and as directed.
Non skid coloured ceramic tiles 7-8mm thick area of tiles exc .11 Sqm but not exc 0.18 sqm in joint less in floor set in neat cement sullary and pointed with coloured /white cement to match the surface over 15mm thick screed bed in CM 1:4 over 25mm PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.
Green Marble 18-20 mm thick (table rubbed and polished ) in floor , steps , jams cooking plateform and like in cement mortar in (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match all as specified after dismentling / demolition of old unserviceable kota stone of any size complete all as specified and directed.
Granite (of any type) tiles 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of cement to match the shade of granite stone including grinding and polishing complete, laid over and including screed bed or bedding layer of 10 mm thick in cement mortar (1:4) after dismentling / demolition of old unserviceable granite of any size complete all as specified and directed.
Brick work with sub class ‘ B’ bricks straight or curved on plan exc 6 m mean radius build in CM 1:6 all as specified.
All as per item No 56 but except bricks, complete all as specified & directed.
Dismantling boarding in any description , fixed in any position with nails complete all as specified & directed.
Prelaminated particle board,18/19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to framework. (fittings and fixtures are included in shutter item), complete all as specified & directed.
Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel all specified & directed.
Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as specified & directed.
S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors complete all as specified & directed.
Fixing only 15 mm dia any grade to walls and ceiling or laying in floors all as specified & directed.
S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors.
Fixing only 20 mm dia any grade to walls and ceiling or laying in floors all as specified & directed.
S&F in repair Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwed for iron pipe, suitable for 15 mm bore complete all as specified.
S & F in repair Ball valves high pressure 20mm dia of PTMT with epoxy coated Aluminum rod and highdensity plastic ball screwed for iron pipe and fixed ( Min wt 15 mm -142 grms / 20mm 210 grms) complete all as specified & directed.
S&F in repair stop valve (Concealed type) cast copper chromium plated screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified.
Dismantling water tanks of exc 500 n.exc 1000 ltr capacity and removing to store complete as specified & directed.
Rotational moulded polythylene water storage tank with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs incl making connections complete all as specified & directed.
Complete removal of existing treatment on wall and and applying two coats of exterior emulsion weather proof paint (Apex) complete all as specified and directed.
S&F factory made UPVC any colour window / ventilators of approved quality as directed by Engr-in-Charge ( Glass shall be paid seprately)complete all as specified & directed.
S&F stainless steel sink , 1.00 mm thick for kitchen or laboratory , with plug , waste pipe , washers including cantilever cast iron brackets , connecting unions , etc overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.
Taking down carefully aluminum/copper point wiring (light fan socket or power) complete and making good disturbed surfaces of walls, floor to match with existing specification complete and all as specified keeping aside serviceable items for reuse with in the same bldg and removing U/S items from site.
M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through medium grade PVC conduit pipe not less than 20mm dia concecled in wall / surface in ceilings including provn of pressed steel terminal boxes of suitable size with 2.8 mm thick plastic laminated sheet cover for mounting switches, socketes and regulator along with continous earth wire of PVC insulated, unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge for following electrical points (Note : Cost of cutting chasing and making good to disturbed surface to match with existing surface are deemed to be included in quoted rate.) . Make of cable: Finolex/Plaza/Kalinga/HPL.
One light / fan point controlled by one switch one way
One socket out let 5 Amps point controlled by one switch one way on same switch board
One socket out let 5 Amps point controlled by one switch one way on independent switch board.
All as a per item No.75 here in before but point wiring with 2.5 sqmm for socket out let 15 Amps point controlled by one switch.
M&L for point wiring controlled by one-one way switch with 1.5 sqmm, (normal area) single core FRLS, PVC insulated 1100 volts, grade multi stranded unsheathed copper conductor unsheathed in and including non metallic rigid PVC casing & capping of 25mm width (Medium grade double locking system) complete with all accessories including PVC sunk box ISI marked for mounting of switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet as top cover, and 1.5 sqmm, (normal area) single core FRLS, PVC insulated 1100 Volts, grade multi stranded unsheathed copper conductor cable as earth wire upto common earth and connected to earth duly including making good the disturbed surface complete all as specified as directed. (Note:- Three run of copper conductor of required size and one run of casing capping measured as one unit and also colour coding of wiring to be followed as re/yellow/blue for phase, black for neutral and green for earth)
One light /fan point controlled by one switch one way
One socket out let 5 amps point controlled by one switch one way on same switch board.
One socket out let 5 amps point controlled by one switch One way on independent switch board.
All as per item No. 77 here in before but point wiring with 2.5 sqmm for socket outlet 15 amps point controlled by one switch.
Supply, laying, jointing and testing of XLPE insulate, armoured heady duty electric cable with aluminium conductor, 1100 volts grade, of size 16 sqmm 4 core laid in trenches, ducts, pipes including taking out old unserviceable cables all as specified and directed
Switch piano flush type 5 amps SP one way 230 volts complete all specified & directed.
Switch piano fiush button single pole one way 15 amps 240 volt complete all as specified & directed.
Socket outlet 5 amps 5 pin flush type , 230 volts, complete all as specified & directed.
Socket outlet 15 amps 6 pin flush type , 230 volts, complete all as specified & directed .
Ceiling rose three terminals/PVC/polycarbonate,isolated body on PVC board complete all as specified & directed.
Supply & fix in replacement of stepped type electronic fan regulator heavy duty flush type complete all as specified & directed.
Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeand overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.
S & F in replacement lamp holder insulated body PVC/ Polycabonate type with back plate suitable for batten/angular/pendent holder fittings complete all as specified & directed.
S&F in replacement Bulk head luminaries, with 1X9 W/1X10W bulkhead luminaries LED light driver holder etc complete with all accessories and including connecting up with three core flexible copper conductor cable of suitable size.
S&F LED lamp 7/9W suitable for lamp holder complete all as specified & directed.
Taking down fan, sealing cable end, dismantling blades and removing fan and blades and deposited to MES store complete all as specified and directed.
Supply & fix in replacement sheet metal enclosure MCB distribution board Triple pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distribution wall surface to match with existing specificatoin complete all as specified & directed. (Note-MCBs will be measured separately).
Supply & fix in replacement sheet metal enclosure MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification, complete all as specified & directed.(Note-MCBs will be measured separately.)
S & F in replacement MCB single pole 240 volt any rating from 6 to 40 amps , with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified & directed.
S & F in replacement MCB SPN 240 volt any rating from 6 to 40 amps , with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified & directed.
S&F in replacement MCCB, TPN 240 Volt any rates, 63 Amps with ruptruing capacity 10 KA incl providing thimble for out going cable, complete all as specified & directed.
S & F LED building security light 25 Watt with pressure die-cast housing with individual LEDs as light source and lens embedded PC cover having TOP opening separate driver compartment with IP 66 protection and impact resistance of IK 07 complete with connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 1.0 sqmm complete all as specified & as directed by Engr in Charge.
Supply and laying, joitng and testing, in replacement, of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 16 sqmm 2 core laid in trenches, ducts, pipes complete all as specified and directed
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth not exceeding 10sqm for laying of cable and foundation of poles stays and getting out in any type of soil all as specified.
Description all as per Srl item No 98 above but depth exceeding 1.5 m and not exceeding 3.00 m depth.
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm thick all as directed.
Removing of excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed by Engineer-in-Charge
M & L for sand cushioning to underground cable, provided with a layer 8 cm before and 15 cm after laying and stretching jointing and testing the cable all as specified and directed. Note: Punned thickness of sand shall be measured.
Supply and laying brick covering with width equal to length of brick as mechanical protection to cable using sub class ‘B’ bricks laid flat, size 230mm x 115mm x 75mm, all as directed
Earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1(using 20mm graded stone aggregates) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No.5 of SSR Part-I connected to earth test point all as specified or indicated including testing on completion.
Submain wiring with two single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 4 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including PVC casing caping/ non metallic rigid PVC conduit medium grade and making good the disturbed wall surfaces to match with existing specification all as required at site incl taking down of existing wiring complete all as directed by Engr-in- charge.
Submain wiring with four single core PVC insulated unsheathed, FRLS flexible copper conductor cable of size 10 sqmm and one single core PVC insulated unsheathed, FRLS flexible copper conductor cable green colour of size 10 Sqmm as earth lead in & including PVC casing caping/ non metallic rigid PVC conduit medium grade and making good the disturbed wall surfaces to match with existing specification all as required at site incl taking down of existing wiring complete all as directed by Engr-in- charge.
S&F steel tubular swaged poles errected to truly vertical or planted as strut complete with 6mm thick mild steel base plate, welded to Pole, B-118 finial taper cap, bolts, nuts and screws, poles made out of ERW MS tubing conforming to IS-2713 Part-II type 410-SP-31 (9m long) including drilling of holes of required size for fixing of cross arms, painting the exposed surfaces of pole with two coats of aluminium paint over a coat of red oxide zinc chrome primer and with two coats of black bituminous paint internally and portion embedded in concrete, making five black and white bands at lower portion of pole each 300mm wide alternately and marking pole number. with black paint at suitable height including taking down old unserviceble PCC pole all as specified and directed by Engr-in-Charg
Supply and fix in repair LED street light fitting 60 watts, made in pressure diecast housing with epony power coated dark graphite grey colour finish.prismatic polycarbonate cover with individual LED lenses with IP 66 complete with all accessories and necessary fixing arrangement on wall at any height including three core 0.5 sqmm copper cable from connector to fitting and removing old unserviceable item complete all as specified and directed.
Supply, laying, jointing and testing, in replacement, of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 sqmm 2 core laid in trenches, ducts, pipes complete incl removing of U/S cable from site all as specified and directed
Supply, laying, jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 10 sqmm 4 core laid in trenches, ducts, pipes complete all as specified and directed
Supply, laying, jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 50 sqmm 3.5 core laid in trenches, ducts, pipes complete all as specified and directed
Supply, laying, jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 70 sqmm 3.5 core laid in trenches, ducts, pipes complete all as specified and directed
FRP junction box of size 30X25X15cm, four strip aluminium bus bar of capacity 63 Amps mounted on epoxy insulators weather proof, MCB SP 6 Amps -01 No including provision for fixing to electric poles with 02 Nos MS clamps of flat 40 x 6mm suitable size complete with nuts & bolts making connection with cable & including thimbles at suitable size complete all as specified and directed.
Supply and fixing of copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade, 2 core, 1.5 sqmm and including connection of junction box to street light and testing complete all as specified and directed.
Supply and fix in repair, GI bracket pipe of size 40 mm dia medium grade of 1.2 mtr long bent to shape hot or cold suitable for street light fitting and making the one end of GI pipe bracket suitable for fixing of street light fittings of any type/size and the GI bracket pipe shall be fixed on wall/pole, steel/PCC surfaces by providing suitable MS iron 25x4 mm clamps 2 nos of length as required at site to the bracket pipe and painting to MS clamps and fixing with necessary suitable nuts,bolts & washers and removing of old unserviceable item complete all as specified and directed.
Dismantling of unserviceable worn out/weathered/damaged ACSR conductor, service feeder of any size from pole after disconnecting of jumpers and insulator bindings complete all as specified and directed.
Dismantling stay assembly including stay strand complete all as directed
Dismantling of old UNSV insulators of any type and size all as directed.
PCC 1:4:8 (normal mix) type D-2 using 40mm graded crushed stone aggregates, as in foundation filling and mass concrete of poles and stay/installation paths complete all as specified and directed.
PCC 1:3:6 (normal mix) type C-1 using 20mm graded crushed stone aggregate all around the pole and inlcuding necessary formwork complete all as specified and directed.
PCC 1:2:4 (normal mix) type B-1 using 20mm graded crushed stone aggregate as in coping of poles and the like complete including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
narayan construction
NATIONAL TRADING COMPANY
Ankit Sagar
M/S. Choudhary Dewan Chand And Sons
vijay kumar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .