SPECIAL REPAIRS ROOF AND FALSE CEILING OF BLDG NO T-26 OR LIVING ACCN AT CMP CENTRE SCHOOL AND CERTAIN REV MINOR WORKS UNDER GE(SOUTH) BANGALORE

Amount

Dismantling of Asbestos cement (corrugated semicorrugated etc ) sheets in roof covering complete all as specified and as directed.

S & F pre-painted galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self taping screws or 'L' type or 'J' type or cranked hook bolt, complete all as specified and directed.

S & F pre-painted galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self taping screws or 'L' type or 'J' type or cranked hook bolt, complete all as specified and directed.

M&l PCC 1:2:4 type B1 as in fillets at junctions between roof and walls, copings rounded, flat or chamfered angles , surface channels and drains complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

M & L for False ceiling with GI snap grid frame work of size 595mmx595mm in true horizontal level suspended on interlocking metal grid of hot dipped galvanised steel sections (glavazized @ 170gms/sqm and bottom exposed width prefinished with leaked polyster paint) consisting of main 'T' runners with suitably spaced joints to get required length and of size 38x24x0.3mm spaced at 1200mm centre to centre and cross 'T' of size 24x25x3mm 1200mm long spaced between main 'T' at 600mm center to centre to form a grid of 1200x600mm and secondary cross 'T' of length 600mm and size 24x25x.3mm to be interlocked at middle of the 1200x600mm panel to form grid of 600mmx600mm and wall angle of size 21x21x.3 and laying false ceiling tiles of 4mm thick fiber cement buidling board, non asbestos (minimum weight 4.8kg/sqm) fixed or laid/inserted to GI form work with screws/clips for false ceiling work including, wherever required, cutting/making, opening for services like diffusers, frills, light fittings, fixtures and smoke detectors etc. Main 'T' runners shall be suspended from ceiling using GI slotted cleats of size 25x35x1.6mm fixed to ceiling with 6mm dia and 50m long metal dash fastner, 4mm GI rods with galvanised steel leveling clips spaced at 1200mm centre to centre along main 'T' section (false ceiling system shall be capable to bear distributed load of minimum 15kg/sqm) complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr deep and 1.50 mtr wide and getting out in soft/ loose soil complete all as specified and as directed.

Material and labour for PCC (1:4:8) typeD-2 ( using 40mm graded stone aggregate) as in foundations, filling in mass concrete, etc complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of Type C1 1:3 :6 (20mm graded aggregate) with solid blocks,exc.10 cm in width and setting in cement mortar1:6, complete all as specified and as directed.

S&F of 75mm bore PVC (SWR) waste and vent pipes in any length with rubber ring joints with laid in floors complete all as specified and as directed.

M&L rendering 15mm in cement mortar 1:4 on fair faces of brick/concrete including finishing even and smooth without using extra cement complete all as specified and as directed.

M&L Preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkli resistant primer complete all as specified and as directed.

M&L for rough excavation n.exc (not exceeding) 1.5 m deep and getting out soft/loose soil complete all as specified and as directed.

M & L for rolling and consolidating formation surfaces in cutting with power roller exc 8 tonne and not exc 12 tonne complete all as specified and as directed.

M/L Hardcore with broken stone or boulders of gauge n.exc 63mm deposited spread and levelled in layers n.exc 15 cm thick watered and well rammed complete all as specified and as directed.

M&L 100 mm thick PCC 1:4:8 , type D2, using 40mm graded aggregate as in sub base flooring well rammed and levelled complete all as specified and as directed.

M&L 100 mm thick PCC 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in floors & pavings complete all as specified and as directed.

M&L for forming expansion joint 150mm deep x 20mm wide filled with pre-formed bituminous filler and primed and sealed with sealing with sealing compound Grade 'B' complete all as specified and as directed.

M&L for forming construction joint 30mm deep x 10mm wide filled with sealing with sealing compound Grade 'B' complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers, each layer not exceeding 25 cm thick in soft/loose soil, complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where direct at level n exc 1.50m above the starting level complete all as specified and as directed.

M & L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out Soft/ loose soil. complete all as specified and directed.

Excavation in post holes in soft loose soil (or similar holes) each n.exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc 50mtr and making good surface.

M&L PCC 1:2:4 type D2 using (20 mm graded aggregate) as in foundation, fillings and mass concrete complete all as specified

Blank

M&L for cement concrete 1:4:8 type D2 ( 40 mm graded aggregate ) 75 mm thick as in sub base of flooring complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-1 ( 20 mm graded aggregate) 75mm thick as in flooring complete all as specified and as directed.

M & L for Steel work in tubular trusses incld special shaped washers etc, complete using ERW or induction Butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and as directed.

M & L for MS plates Square ,cut or notched forming holes, without any attachment conforming to Fe 410-W Gde E-250 Quality A complete all as specified and as directed.

M&L for preparing new or previously untreated surface of steel any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with mixture of white and grey cement in equal proportion and no pigments, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishing complete all as specified and as directed.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 (1cement : 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage pening wherever required complete all as specified and as directed.

Removing Excavated soil exceeding 250 M but not exceeding 500m and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-25 (Design mix) using 20 mm graded crushed stone aggregate) in foundations including rafts, footings and mass concrete complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-25 (Design mix) using 20 mm graded crushed stone aggregate) in columns complete all as specified and as directed.

M&L for Providing precast cement concrete 1:3:6 type C-1 solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls confirming to IS 2185-1979 laid in CM 1:6 complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry of Type C1 1:3 :6 (20mm graded aggregate) with solid blocks,exc.10 cm in width and setting in cement mortar1:4, complete all as specified and as directed.

Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

All as per item no.38 above but 6 to 8mm dia complete all as specified and as directed.

Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M & L for Form work to sides of fdn and PB for rough finished surfaces of concrete complete all as specified and as directed.

M & L for Form work to columns for fair finished surfaces of concrete complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-25 using 20 mm graded crushed stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-25 using 20 mm graded crushed stone aggregate) in slab supported on walls and beams and shelves like complete all as specified and as directed.

Blank

M & L for Form work to sides and soffits of suspended slab for fair finished surfaces of concrete complete all as specified and as directed.

M & L for Reinforced Cement Concrete Type M-25 using 20 mm graded crushed stone aggregate) in Chajja complete all as specified and as directed.

M & L for Form work to chajja for fair finished surfaces of concrete complete all as specified and as directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces of concrete complete all as specified and as directed.

S&F Powder coated anodised aluminium frame, for door, windows, ventilators runner & packing with rubber gasket etc, with one or more rebates including joinning cleat for rebates including joining cleats for fixing etc, complete all as specified and as directed.

S&F 4.0 mm thick figured glass, pin head type and glazing with aluminium beading & rubber gasket in each panes in square n.exc 0.5 sqm in each pane in louvers complete all as specified and as directed.

S&F solid door frame of size 50 x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening as per specification & drawing complete all as specified and as directed.

M&L factory made solid pannel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be filled in the MS frame welded /seated to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement applying and fixing in the frame at side as per specification complete all as specified and as directed.

S&F 100 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed .

S&F mild steel sliding bolt 250 mm long plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fix complete all as specified and as directed

S&F 150 mm long aluminium anodised barrel tower bolts and extruded section and fixed complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished smooth and even without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick CM 1:4, over 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement including mixing of water proofing compound, finishing the surface fair and even complete all as specified and as directed.

M&L for rendering 5 mm thick in ceiling on fair faces of concrete surfaces in cement mortar 1:3 and finished smooth and even without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:4 over roof slab and top of chaajja etc with WPC and finished smooth and even without using extra cement complete all as specified and as directed.

Supply only Integral water proofing compound complete all as specified and as directed.

M & L for 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in floorings including finishing the surface even and smooth using without extra cement complete all as specified and as directed.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15 mm thick in CM 1:6 etc complete all as specified and as directed.

M&L for glazed coloured ceramic tiles 350 x 250 x 7 mm/ 450 x 350 x 7 mm thick on vertical surfaces such as dados set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed.

M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M&L for applying three coats of colour wash over a coat of priming plastered and other surfaces with alkali resistant complete all as specified and directed .

M &L for preparation of new plastered surface and applying two coats of cement base paint over cement primer on walls complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specifed and as directed.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia complete all as specifed and as directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Cat Part No of Cera F8030105 AB or equivalent in parryware/hindware/prayag)

S&F vitreous china wash hand basin, white, flat back size 550 x 400 mm including one number brass CP waste coupling, waste pipe 32 mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. (Make Cat part No S2040103 (Cornet series) of Cera or Equivalent in parryware/hindware)

S&F waste pipe for WHB complete all as specified and as directed

S&F brass CP 15 mm bore two way bib cock, quarter turn with wall flange and aerator, complete all as specified and as directed.

S&F 75mm dia PVC (SWR) floor/Nahani trap, plain with grating including solvent cement complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position complete all as specified and as directed.

S & F 20 mm dia CPVC ball valves complete all as specified and as directed.

S&F 20 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and as directed.

S&F GI pipe 20 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor complete all as specified and as directed.

S&F GI pipe 15 mm dia medium grade steel water tubing with fittings fixed on walls or laid in floor concealed type complete all as specified and as directed.

S&F Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and flynuts, screwed for iron pipes and fixed for 15mm bore pipe complete all as specified and as directed.

S&F 15mm dia fancy type chromium plated angle valve screwed both end for iron pipe or for unions , high pressure with long shank & cup (concealed type) having crutch handle complete all as specified and as directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

M & L for Concrete bed to drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate, complete all as specified and as directed.

M&L for 100 mm dia Reinforced concrete pipes, class NP3, laid and jointed complete with collars, complete all as specified and as directed.

M&L providing precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in copings, setting in cement mortar 1:4 complete all as specified and as directed.

M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered/ stopped ends etc complete all as specified and as directed.

M&L providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in landings, cover slabs (for manholes etc) chullah hoods, chajjas, water troughs setting with cement mortar 1:6 complete all as specified and as directed.

Blank

M&L 20 to 25 mm thick coloured glossy finished factory made PCC designer tiles/pavers, set and jointed & pointed in neat cement slurry as in path/floor over and including 20 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishing complete all as specified and as directed.

M & L 75 mm thick PCC (1:3:6) type C1 using as in plinth protections with joint cutting and joint filling with Bitumen grade 'B' etc complete all as specified and as directed.

S&F Tubular towel rail, brass chromium plated 20mm dia, D type, 60cm long between flanges all as specified and as directed.

S & F SS Grade 304 Soap dish, any size, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 on floor/roof /Chajjas surfaces mixed with WPC @3% by weight of cement finished the surfaces even and smooth without using extra cement all as specified and as directed.(WPC will be measured and paid separetly)

M&L for cleaning the plastered/concrete surfaces with wire brushes and applying water proofing treatment as under: (a) Apply bitumen primer at the rate of 0.27 litre per Sqm as per IS 3384-1986 and bonding bitumen of VG-10 @1.20 Kg per Sqm. (b) APP modified water proofing memebrane as per IS 16540/16532-2017, 3mm thick and weighing not less than 3.80 kg per Sqm reinforce polyster/HMHDPE matt black finish over compatible primer/bonding bitumen and finish the top surface with bituminus aluminium paint @0.10 Ltr per Sqm complete all as specified.

M & L point wiring with 1.5Sqmm PVC insulated unsheathed multistranded ingle core copper conductor cable in PVC casing capping including modular type steel sheet pressed terminal box (recessed) with modular frame and top cover including 1.5 Sqmm PVC insulated copper conductor earth continuity wire for one light / fan / bell point controlled by one switch complete all as specified and as directed.

M & L switch piano type 5Amps sinngle pole one way complete all as specified and as directed.

M & L ceiling rose surface bakelite 65 x 50mm two to three terminals complete all as specified and as directed.

S & F surface & wall mounted LED batten 4feet with extruded aluminium housing and robust construction 24W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and as directed. Make: Bajaj Cat Part No BCLSP 24 WH or equivalent make in Wipro / Philips.

S & F surface & wall mounted LED batten 2feet with extruded aluminium housing and robust construction 10W system lumen including flexible copper 2 core wire from tube light fitting to ceiling rose required length with all accessories all as specified and as directed. Make: Bajaj Cat Part No BCLSP 10 WH or equivalent make in Wipro / Philips.

S & F PVC body sound proof Exhaust fan 250mm size with single phase 230volt 900RPM with louvers complete making a hole in wall or existing window grill cutting and 12mm plywood suitable size of exhaust fan make hole and fixing the window nut and bolt, washers and after finishing work disturbed surface of wall complete all as specified and as directed. Make: Bajaj Product code 70049 or equivalent to Havells / CG / Usha / Bajaj

S & F MCB, DB double door type, made out of CRCA mild steel sheet flushed in wall, SPN 4way with 200Amps rated bus bar, 240Volts IP 43 with PVC MCB blanking plate, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and as directed.

S & F MCB SPN 6 - 40Amps, 240Volts complete all as specified and as directed.

S & F MCB SP 6 - 40Amps, 240Volts complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 mtr deep and 1.50 mtr wide and getting out in hard/dense soil complete all as specified and as directed.

S & F GI tubing medium grade complete with all fitting laid in trenches / wall of size 25mm complete all as specified and as directed.

Cutting screwing existing GI pipe up to 50mm for inserting Tee pieces, bends, sockets etc for taking out of new connection complete all as specified and as directed.

S & F 25mm dia Gun metal gate valve with inner wheel head, screwed both ends in iron pipe and fixed complete all as specified and as directed.

S & F 25mm dia of brass Ball valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Supply and spread river sand to required width at bottom and top for cable cushioning all as specified and directed.(8cm before laying the cable and 15cm after laying the cable and punned into 18 cm thickness) Note: Punned thickness only shall be measured and paid.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm x 2 core complete all as specified and directed.

Elite Constructions

YASHASVI BUILDERS

Lucky Enterprises

J PUSHPALATHA ENGINEER AND CONTRACTOR

S M Shetty