Permanent Restoration of 132 KV DC Chenani Srinagar Transmission Line by way of Re alignment of Transmission Line from J65 To J70 Near Thard

PART-A Engineering design,supply of tower accessories ,lattice type tower structures line material & accessories for Permanent Restoration of 132 KV D/C Chenani-Srinagar Transmission Line by way of Re-alignment of Transmission Line from J-65 To-J-70 Near Thard under the jurisdiction of TLMD-III Udhampur"

Danger Plate

Number Plate

Phase plate

Circuit Plate

Anti Climbing Device

Bird Guards

Counter poise Earthing Material

Nuts & Bolts with washers

PART-B Engineering design, supply of tower accessories ,lattice type tower structures line material & accessories

B/C Type tower with 3 Mtr. Body extension. 1 No. Tower with Normal stubs

SPL-1 Type tower. 1 No. Tower with Normal stubs

SPL-1 Type tower with 9 Mtr. Body extension. 2 No. Towers with Normal stubs

SPL-1 Type tower with 6 Mtr. Body extension. 1 No. Towers with Normal stubs

Leg Extension for R/C and L.E 2 Nos.

Supply of Line Material and Accessories

ACSR Panther conductor

Mid span joints for conductor

Vibration Damper

Repair Sleeves

Armed Rod, Binding wires and tapes for conductor etc.

OPGW, Dual Window single-Mode with Mode field diameter 8.6-9.5µm, cladding diameter 125µm ±µm, 1.5% wastage included (Double Peak)

Tension Assembly- dead End for 24 F OPGW

Tension Fittings assembly - For 24 F OPGW including all accessories at Joint Box (Splicing) Location

Tension Assembly- Double tension Pass through Assembly for 24 F OPGW

Vibration Damper for 24 F OPGW

Down Lead clamp Assembly for 24 F OPGW

Joint Box for 24 F OPGW

120 KN EM strength porcelain disc insulators

Single tension insulator fittings

Double tension insulator fittings

Tag Welding for Towers

Erection of various type of tower including leg extension complete with Nuts & bolts including tag welding and fixing of tower accessories.

C+3 Type Towers 1 No.

SPL-1 + Normal Type tower 1 no.

SPL-1 + 6 Type tower 1 no.

SPL-1 + 9 Type tower 2 no.

Leg extension/ RC for Towers

Dismantling of various type of towers including leg extension complete with Nuts and Bolts including write back to Divisional store Tlmd III Udhampur including all mechanical transport and manual Labour

B+ 0 Type Towers (2 nos)

C+ 3 type tower (1 No.)

Installation of 6 No. insulator strings complete with necessary hardwares laying and stringing of ACSR Panther conductor including fixing of conductor accessories and temporary anchoring of towers laying and stringing of earthwire including fixing of earth wire accessories for Double Ckt line.

Dismantling of 6 No. insulator strings complete with necessary hardwares of Panther conductor and OPG/earthwire along with all necessory fittings and write back to Divisional store Tlmd III Udhampur including all mechanical transport and manual Labour.

Benching for casting of foundation

15% hard/dense rock of 1170 cum

85% hard/dense soil of 1170 cum

Casting of foundations for C + 3 type as per KEC Design

15% hard/dense rock of 127.28 cum

85% hard/dense soil of 127.28 cum

Concrete M20 (Complete)

Concrete M10 (Complete)

Re-Inforcement

Form Work

Back Filling

Casting of foundations for SPL-1 + 9/ SPL-1 + 6 + SPL Normal as per KEC Design

15% hard/dense rock of 124.42 cum

85% hard/dense soil of 124.42cum

Concrete M20 (Complete)

Concrete M10 (Complete)

Re-Inforcement

Form Work

Back Filling

Protection work in 1:6 RR Masonary icluding benching, earthwork, lavelling, back filling carriage, disposal of material and other miscllenious works required on site and drawings approved by Site Engineer.

T & P Items ( To be supplied in Divisional store)

12 volt rechargable search light with inbuilt charger complete with dimmer & flasher of reputed make such as VKS etc

Insulated cutting pliers 12 inches size of reputed make

Tool Kit for Automatic (Automotive/Mechanical) use (132-Pieces) reputed makes (Stanley)

Screw driver 18 inches size of reputed make

Iron cutter 14”, 2300 W of reputed make

Automatic Clamp (Self Griping) 18-24 mm 220 KV for casablance to Drake

Single Sheave Pulley Open I Type 8 Ton

Single Sheave Pulley Close I Type 8 Ton

6 Bolted Come Along Clamp for Zebra (Aluminium ) as per sample provided by the deptt

PP Rope 20mm (100 m) Bundle

Safety shoes ISI

Safety belt, minimum 2 m rope length along with scaffold hook - Class-A material suitable for EHV TransmissionLine maintenance staff (PN56 & 351)(Double lanyard with padded straps and supports) hook - Class-A material suitable for EHV Transmission

Safety Helmet ISI

Please Enable Macros to View BoQ information