Renovation of road from airwan link road to nagri korepunnu road by way of RBM an filling shingling metaling and pre mixing including raising of berms of road and etc (allied links also)

Amount

Banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooder or steel hammers, and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in all kinds of soil;

Supply and Stacking of graded stones agg at site range ( excl. cost of carriages) :

(63mm to 45mm)

(53mm to 22.40mm)

Supply and Stacking of stone screening/chippings at site (excl. cost of carriages):13.20 mm nominal size (TYPE A)

Supply and Stacking of Stone Dust (excl. cost of carriages): Crushed at Site -

Laying W.B.M with specified stone agg, stone screening and binding material incl screening, sorting, spreading to template and consolidation with power roller of 8 to 10 tonne capcity etc complete :

Providing and appling tack coat using hot straight run bitumen of grade G-10 including heating the bitumen, spraying the bitumen with mechanically opreted spray unit fitted on bitumen boiler, cleaning and preparing the existing as per specification

2 cm premix carpet surfacing with 1.8 cum & 0.90 cum of stone chipping of 13.20 mm size & 11.20 size resp. per 100 sqm & 52 & 56 kg of hot bitumen per cum of stone chipping of 13.2 mm & 11.20 mm of 6 to 9 tonne capacity etc With paving asphalt grade VG-10 Heated & then mixed with solvent at the rate of 70 grams per kg of asphalt

Proving and laying seal coat of pre mixed fine agg. With bitumen using 128 kg bitumen of grade VG-10 bitumen per cum of fine agg. And 0.60 cum of fine agg. Per 100 sqm of road surface including rolling and finishing with road complete

Providing and fixing CIB of approved size by way of making foundation in M10, Brickwork in 1:6 cement mortar including plastering with 1:4 cement mortar, painting and writings as per the directions of engineer incharge including all carriages , supply , complete job.

M/S UMESH KUMAR

Mandeep Singh Saini

KULBHUSHAN CHANDER