Work of Narmada Based WSP for 163 Village of Dhorimanna and Chouhtan Block, Distt. Barmer (PKG CP-03, Chouhtan-1 under JICA funded RRWS and FMP Phase II on SPR basis with one-year Defect Notification period and 10 years O and M. (CP-03)

Amount

BILL 1 - WATER TREATMENT PLANT

Survey, Design, Construction, Testing and Commissioning of Rapid Gravity Water Treatment Plant (Output Capacity 58 MLD or 2636.365 KL/Hr.) including all relevant Civil, Electrical, Mechanical, Instrumentation, Automisation, SCADA Works along with Ancillary Civil Works as per specifications and Employer's requirement complete in all respect. at ALETI HW. (Instrumentation, Automisation and SCADA works shall be paid as per Section for Instrumentation, Outdoor Switchyard as per Section for Electrical)

Inlet and Distribution System: Inlet chamber, Measuring channel, Flash Mixers, Main/ By Pass Channel to Filter Beds, Walkways, Stairs, Railings etc.

Equipments

Civil works

Clariflocculators: Pipes between Flash Mixers and Clariflocculators, Clariflocculators, Walkways, Stairs, Railings, Clarified Water Channel to the Filter Inlet Channel and Sludge Pipe to Sludge Buffer Tanks etc.

Equipments

Civil works

Filters and Filter House: Filters, Distribution/ Back Wash Channel, Pipe Gallery with Clear Water Channel and Sump, Control Gallery, observation Platforms, Walkways, Stairs, Railings, Back Wash Water Tank, Clear Water Measuring Channel, and any other item required for completion of filter plant other than specified in BOQ.

Equipments

Civil works

Administrative and Control Building: Administrative Control Building, Backwash Pumps, Air Blowers, Laboratory Equipment, Water Cooler, Furniture etc. as per Scope of Work and Specifications

Equipments

Civil works

Chemical House: Chemical House, Alum/PAC and Lime Dosing Equipment, Piping to the Injection Point and Injection Devices

Equipments

Civil works

Chlorine Building, Chlorination and Chlorine Storage: Chlorine Storage Area, Chlorine Building, Chlorine Toners, Chlorination Equipments, Chlorination Chamber, Injection Devices etc

Equipments

Civil works

Backwash Water and Sludge Recycling and Disposal: Construction of Wwater Recirculation System including associated work of Inlet/Outlet, Recycling of Backwash Water and Sludge Handling and Disposal System, Pumps and Piping etc.

Equipments

Civil works

BILL-2 - PIPELINE WORKS

Earth work in Excavation in all kind of Strata (all type of Soil/ soft rock/ hard rock etc), including Road Cutting in all type of road (RCC/Cement Concrete / bitumen road/stone pitching road /gravel road etc) and including road restoration in all type of road (RCC/Cement Concrete / bitumen road/stone pitching road /gravel road etc), Sand/Soil Bedding in rocky starta or wherever required, disposal of surplus excavated Earth for the Trench, Road Cuttings/Crossing (other than pushin) & Road resotoration , River/ Drain and Canal/Gas/Petroleum Pipelines Crossing (other than pushin), Construction of RCC - Pedestals, Anchor/Thrust/Fixidity Blocks, Cross walls, Protective Aprons, Encasing, other Civil Works etc as per specifications and Employer requirement for following diameter Pipe Line:-

Survey, Design, Supply, Laying, Jointing, Testing and Commissioning of ISI marked S/S DI (Ductile Iron) K7 Class Pipe as per IS:8329-2000 (Amended up to date) for Raw / Clear Water Transmission, ESR/ GSR Rising Main, Cluster/Village Distribution including Flanged Pipes wherever required, Socket/Flanged Specials and Isolations and Interconnection works with existing system where dovetailing is required . This work also includes the required Laying above the Ground Level, Crossing required for Drain, Canal, River and Road crossings with Reinstatement Works, following diameters of Pipe Lines as per Employer requirement and Specification. (Payment for Casing Pipe to Cross National/State/Mega Highway/GREF Road shall be made as per seperate item. However, MS / DI DF / Fitting for other to this shall be paid in this section ).

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

350 mm dia

450 mm dia

500 mm dia

700 mm dia

900 mm dia

Survey, Design, Supply, Laying, Jointing, Testing and Commissioning of ISI marked S/S DI (Ductile Iron) K9 Class Pipe as per IS:8329-2000 (Amended up to date) for Raw / Clear Water Transmission, ESR/ GSR Rising Main, Cluster/Village Distribution including Flanged Pipes wherever required, Socket/Flanged Specials and Isolations and Interconnection works with existing system where dovetailing is required . This work also includes the required Laying above the Ground Level, Crossing required for Drain, Canal, River and Road crossings with Reinstatement Works, following diameters of Pipe Lines as per Employer requirement and Specification. (Payment for Casing Pipe to Cross National/State/Mega Highway/GREF Road shall be made as per seperate item. However, MS / DI DF / Fitting for other to this shall be paid in this section ).

Survey, Design, Supply, Laying, Jointing, Testing and Commissioning in position to correct line spirally welded MS /SAW/Fabricated Pipe having bevelled end plates / coils, confirming to IS 3589- 2001 or its latest revision/ amendments, for thickness (as per approved design) and inside dia Mtr, including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge; Providing and applying following Coating to the External surface of MS pipes, including preparation of surface by cleaning as per ISO 8502-3/ SSPC-SP10/ NACE No.2 near white blast cleaning and abrasive blasting to a finish to SA 2.5 as per ISO: 8501-1 and surface profile / anchor profile of 50- 75 / 75-100 microns as per ISO: 8503-2, including field joint coating at site complete as per Technical specifications and direction of Engineer –in-charge: 3 LPE (3 Layer Polyethylene) / DFBE (Dual Layer Fusion Bonded Epoxy)/ PU (Polyurethane)/ Polyolefin Tape coating . Providing and applying Solvent free, two pack liquid epoxy lining to internal surface of M.S. Pipe as per BS 6920:2000 and AWWA C210 standard including preparation of internal surface of pipe by cleaning and abrasive blasting including field joints coating at site complete as per technical specification and direction of Engineer in Incharge. Liquid Epoxy shall be NSF/WARS approved for drinking water. Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

100 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

125 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

150 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

200 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

250 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

300 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

350 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

450 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

500 mm dia confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

Outer Dia. 711 mm & 06.30 mm min. thickness confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

Outer Dia. 914 mm & 08 mm min. thickness confirming to IS 3589-2001 or its latest revision/ amendments/reaffirmed

Outer Dia. 1219 mm & 10 mm min. thickness confirming to IS 3589-2001 or its latest revision/ amendments/ reaffirmed

Providing, erction and commissioning of Cathodic protection for the buried portion of 900 mm & 1200 mm MS pipeline including cost of rubber gaskets etc. required for cathodic protection seperation, if any, construction of terminals etc. as per specification

900 mm dia

1200 mm dia

Survey, Design, Supply, Lying and Pushing of MS Casing Pipe as per approved design & drawing of concern Department Authority/EIC ( for following carrier pipe dia.) of specified thickness (thikness as per approved drawing&design) including all type of required size of casing pipe , Sluice Valves/other Valves at U/S and D/S and jointing/supporting materials with valve chamber etc civil work approved by concerned Department Authority/EIC by Trenchless Method adopting any suitable Technology Below Ground at required depth under Running Traffic Condition as per NH/SH/GREF/MEGA Highway Standard/GREF road/Canal Crossing, including Excavation of Driven Pits and Exit Pit with proper Protection, Construction of Temporary Works etc. as per approved by concern Authority Specification as per Employer's Requirement Specification for following Carrier Pipe diameter (Carrier Pipe shall be measured in Pipe Line Length in separate item) including all type of Excavation of boring pit & receiving pit provide Thrust Wall / Bed as required boring, jacking of MS pipe in embankment for crossing as per approved design & drawing - For all soil strata (for Canal/road etc Crossing ) by trenchless technology

MS Casing Pipe required for carrier pipe of 100 mm dia

MS Casing Pipe required for carrier pipe of 125 mm dia

MS Casing Pipe required for carrier pipe of 150 mm dia

MS Casing Pipe required for carrier pipe of 200 mm dia

MS Casing Pipe required for carrier pipe of 250 mm dia

MS Casing Pipe required for carrier pipe of 300 mm dia

MS Casing Pipe required for carrier pipe of 350 mm dia

MS Casing Pipe required for carrier pipe of 450 mm dia

MS Casing Pipe required for carrier pipe of 500 mm dia

MS Casing Pipe required for carrier pipe of 700 mm dia

MS Casing Pipe required for carrier pipe of 900 mm dia

MS Casing Pipe required for carrier pipe of 1200 mm dia

Survey, Design, Supply, Laying, Aligning, Fixing in position, Jointing, Testing, Commissioning of ISI marked HDPE Pipes of Class PE 80, PN-6 suitable for Potable Water as per IS 4984:1995 (Amended up to date) with Specials and necessary Jointing Material like Mechanical Connectors i.e. Thread / Insert Joint / Quick Release Coupler Joint /Compression Fitting Joint or Flanged Joint and Special Jointing Pipe by Butt Fusion / Electro Fusion Welding method, Flanged Joints shall be used for Jointing HDPE Pipes to Valves and Non-HDPE Pipes. This work also includes the Drain/ Canal/ River/ Road Crossings with Reinstatement works for following outer diameters of Pipe Lines as per Employer's Requirement and Specification : (Payment for Casing Pipe to Cross National/State/Mega Highway/GREF Road shall be made as per seperate item. However MS / DI DF / Fitting for other to this shall be measured in this section ).-

Supply, Installation, Testing and Commissioning of following diameter PN 1.0 Rating Tamper Proof CI Single Air valve including construction of RCC Air Valve Shaft (height 3.0m above ground level) complete work on DI/HDPE Pipe Lines as per Employer's Requirement and Specification -

Supply, installation, Testing and Commissioning of following diameter PN 1.6 Rating DI Kinetic type temper proof Double orifice Air Valve with Isolation Valves including construction of RCC Air Valve Shaft (height 3.0m above ground level) complete work on DI/HDPE Pipe Lines as per Employer's Requirement and Specification -

Supply, installation, Testing, Commissioning and Jointing in pipe line, combination Air Release Valve Kinetic type with single chamber housed Double orifice and have 3 functions, large Air exhaust, small Air venting and large air intake during vacuum of pipeline of approved makes of following pressure rating and dia and as per following specifications: Governing standard- AWWA C512, Body and bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865, Float & internal trim: AISI 304 stainless Steel, Seat ring & Gasket - EPDM/NBR Drilled as per IS:1538. Electrostatic Epoxy Powder (EP- P)/ Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body & cover inside and outside Fasteners- CS/ Galvanised steel, Outlet of big orifice will have a screen to prevent Tamper of float, Big orifice size should be equal or larger than the inlet flange bore, for fully comply with AWWA C512), Valve including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.

150 mm dia (PN 1.6 )

Supply, Installation, Testing and Commissioning of following diameter PN 1.0 Rating CI Scour Valves including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, complete work at all required locations per Employer's Requirement and Specification :-

Supply, Installation, Testing and Commissioning of following diameter PN 1.6 Rating CI Scour Valves (with Gear Arrangement if required) including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, complete work at all required locations as per Employer's Requirement and Specification :-

Supply, Installation, Testing and Commissioning of following diameter PN 1.0/1.6 Rating D/F CI Sluice Valves (with Gear Arrangement if required) including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, complete work at all required locations per Employer's Requirement and Specification :-

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Supply, Installation, Testing and Commissioning of following diameter suitable Rating DI Soft Seated Sluice Valves (with Gear Arrangement if required) for Off takes/Junctions, Sectionalising, outside of pump house and at upstream of FCV to Pipe Line, including in-village pipelines including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, complete work as per Employer's Requirement and Specification :-

Manually Operated Resilient Seated Sluice Valves of Class PN 1.6

Motorized Sluice Valves with Electric Actuator and integral starter of Class PN 1.6

100 mm dia

125 mm dia

150 mm dia

200 mm dia

350 mm dia

400 mm dia

500 mm dia

600 mm dia

700 mm dia

900 mm dia

1000 mm dia

1200 mm dia

Supply, Installation, Testing and Commissioning of following diameter suitable Rating DI Soft Seated Butterfly Valves for Sectionalising to Pipe Line including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, complete work as per Employer's Requirement and Specification :-

Class PN 1.6 Manually Operated with Gear

Class PN 1.6 Motorised Operated

700 mm dia

900 mm dia

1000 mm dia

1200 mm dia

Supply, Installation, Testing and Commissioning of following diameter suitable Rating DI double flanged resilient seated Dual plate check valves on individual & common delivery piping of following sizes (PN-1.6) for Sectionalising to Pipe Line including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, as per Employer's Requirement and Specification :-

100 mm dia

125 mm dia

150 mm dia

200 mm dia

350 mm dia

400 mm dia

500 mm dia

600 mm dia

700 mm dia

1000 mm dia

Supply, Installation, Testing and Commissioning of following diameter suitable Rating Plungar Type Flow and Pressure Control Valves including all type of jointing material, Dismantling Joints, Fittings, nutbolt, rubbersheet and Specials etc, along as per Employer's Requirement and Specification :-

Carrying out Surge Analysis, Construction, Supply, Installation, Testing and Commissioning of suitable Surge Controlled Devices as approved with all Piping, Valves, Accessories for the Transmission and Rising/ Pumping Mains complete as per Employer's Requirement and Specifications :-

Transmission Main

Raw Water Transmission Main from RD 74 Km RWPS TO Aleti H/W

RWR TO WTP

ALETI HEAD WORKS to IPS BAMARALA

IPS BAMARALA to IPS PHAGALIYA

IPS BAMARALA to IPS SOBHALA DARSHAN

IPS PHAGALIYA to CPS FAKIRON KA NIWAN

IPS PHAGALIYA to CPS SATA

IPS SOBHALA DARSHAN to IPS DHANAOO

IPS SOBHALA DARSHAN to CPS SERWA

ESRs Rising Main from

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

IPS SOBHALA DARSHAN

Survey, Design, Construction of RCC valve chambers for Sectionalizing valves,offftake/junction valves, flow meters(FM+DJ) and (FM+DJ+SV), complete work at all required locations. This also includes excavation in all type of Strata with all lift, refilling of earth, disposal of excess earth materials for following pipe sizes as per employer's requirement and Specification :-

up to 125 mm (Minimum size 1.13mx0.85m)

above 125 mm & up to 200mm (Minimum size 1.17mx0.95m)

above 200 to 300mm (Minimum size 1.26mx1.185m)

350 to 450mm (Minimum size 1.39mx1.43m)

500 to 700mm (Minimum size 1.61mx1.75m)

750 to 1200mm (Minimum size 2.10mx2.30m)

Survey, Design, Construction of RCC chambers for Scour valves, supports, complete work at all required locations. This also includes end excavation in all type of Strata with all lift, refilling of earth, disposal of excess earth materials for the following Valve sizes as per employer's requirement and Specification :-

80/100 mm dia (Minimum size 1.13mx0.85m)

Survey, Design, Construction of RCC chambers for SV+DJ+FCV+FM+DJ, within campus, supports, complete work at all required locations. This also includes end excavation in all type of Strata with all lift, refilling of earth, disposal of excess earth materials the following Valve sizes as per employer's requirement and Specification :-

up to 250mm (Minimum size 3.0mx1.5m)

BILL-3 - RESERVOIR WORKS

Surveying, Geotechnical Investigations, Designing and construction of Raw water Reservoir, earth work, Double PCC Block Lining work, HDPE film work, Ramp, inlet sump, inlet/delivery well, including the works related to inlet arrangements delivery well, making interconnection, Bituminous Road work all around the RWR; with all finishing work to complete the structure in all respect etc. as per attached drawing, scope of work, specification and as per direction of Engineer-in-charge complete in all respect at Aleti HW. (As per approved Drawing & Design from MNIT Jaipur/MBM Engineering college Jodhpur or any Indian Institute of Technology Govt. of India.)

1420 ML capacity

CPS Sata (800 KL)

CPS Fakhiron ka Niwan (700 KL)

CPS Serwa(500 KL)

CPS Aleti HW (5750 KL)

IPS Bamarla (5600 KL)

IPS Phagaliya (1400 KL)

IPS Dhanoo (3200 KL)

IPS Shobhala Darshan (3700 KL)

BILL-4 PUMPING STATION WORKS

Civil WORKS

Survey, Design and Construction of RCC framed type structure Pump House with transition zone and complete civil work for taking water from WRD canal offtake to RWPH , (with provision of trash rack from outlet Chamber, Sump for raw water pump house to accommodate VT pumps, providing associated Electrical and plumbing works for water supply and sanitation, Civil work required for installation of gantry for Semi EOT crane, Pipes and specials, rain water harvesting & collection system for rain water from pump house roof to the sump complete in all respect as per employer's requirement and Specifications at following location:-

RD 74 KM RWPS

Survey, Investigations, Design and Modification, Construction of intake structure to accommodate VT pumps, providing associated Electrical and plumbing works for water supply and sanitation, Civil work required for installation of gantry for Semi EOT crane, Pipes and specials, rain water harvesting & collection system for rain water from pump house roof to the sump complete in all respect as per employer's requirement and Specifications at following location:-

RWPS for RWR to WTP

Survey, Design and Construction of RCC framed structure pump house building to accommodate C/ F pump sets, Maintenance bay, Control Room with associate Electrical / Plumbing work. This shall include Civil works required for erection of Semi EOT crane, installation of pumps and panels, cable trenches, drainage, access platforms, ladders, thrust/anchor blocks, pipe supports, Pipes and specials, rain water harvesting & collection system for rain water from pump house roof to the sump complete in all respect as per employer's requirement and Specifications at following location:-

At Aleti Head work

At Bamarla Head work

At Shobhala Darshan Head work

At Phagaliya Head work

At Serwa Head work

At Sata Head work

At Fakiro Ka Niwan Head work

Supply of office furniture as per Employer requirement and Specification as per Specifications at RD 74 KM RWPS, Aleti Head work, Bamarla Head work, Shobhala Darshan Head work, Barmer CR, Chouhtan CR, Phagaliya Head work, Serwa Head work, Sata Head work and Fakiro Ka Niwan Head works

MECHNICAL WORKS AND PUMPING MACHINARY:- Design, Providing , Installation, Testing, Commissioning for following as per Employer requirement and Specification:-

MS/DI pipe work for suction piping, from puddle Collar in CWR and common cum individual suction header with inside and outside protection (Tape coating/ epoxy coating) and all miscellaneous bore in pump house wall at following location :-

Aleti HEAD WORKS

Aleti RWPS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

MS/DI pipe work for suction piping, from puddle collar in CWR and common suction header and individual suction header with inside and outside protection (Tape coating/ epoxy coating)and all miscellaneous bore in pump house wall at following locations :-

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

MS/DI pipe work for reducer, enlarger, inividual delivery piping of each pump and common delivery header with inside and outside protection (Tape coating/ epoxy coating)up to Valve/flow meter and related works including bore in walls at following locations as -:-

RD 74 KM RWPS

RWPS for RWR to WTP

MS/DI pipe work for individual suction from common header, reducer, enlarger, inividual delivery piping of each pump and common delivery header with inside and outside protection (Tape coating/ epoxy coating)up to Valve/flow meter and related works including bore in walls at following locations as -:-

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Manually operated PN 1.0/ 1.6 rating soft seated sluice valves with dismantling joints at intersection of CWR outlet with common suction header and individual suction of each pump at following locations:-

RD 74 Km RWPS

RWPS at Aleti

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Ductile Iron PN 1.6 rating Double Plate Check valves with Expansion Bellow Type Dismantling Joint on each pump delivery side at following locations:-

RD 74 Km RWPS

RWPS at Aleti

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Ductile Iron PN 1.6 rating Electrically operated Butterfly/ Soft seated Sluice valve with actuators on each individual delivery of each pump side at following locations:-

RD 74 Km RWPS

RWPS at Aleti

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

PN 1.6 rating Manually operated soft seated sluice valves with expansion bellow type dismantling joints on individual delivery of each pump as well as on common delivery header at following locations:-

RD 74 Km RWPS

RWPS at Aleti

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Vertical Turbine Pumps with 6.6/.415 KV motor, Column pipe, shaft and other accessories complete at following location:-

RD 74 Km RWPS (VT pump with 6.6 KV motor)

From Canal to RWR Aleti HW (for normal flow) (2W+1S)

From Canal to RWR Aleti HW (for Pre-Closure flow) (4W+2S)

RWPS at Aleti (VT pump with 0.415 KV motor)

From RWR to WTP Aleti HW (2W+1S)

HSC / End Suction type Centrifugal Pump sets (1W+1S) with LT 0.415 kV horizontal motor,base plates, Coupling, foundation bolts, accessories etc. on concrete foundation with accurate levelling and proper alignment complete at following locations:-

ALETI HEAD WORKS

ALETI HEAD WORKS to IPS BAMARALA (3W+2S)

ALETI HEAD WORKS to P-SR PRATAP NAGAR CL-02 , P-SR RADOO CL-05 , P-SR ARNIYALI CL-03 , P-SR DHAKON KA GOLIYA CL-04 (1W+1S)

ALETI HEAD WORKS to P-SR ALETI CL-01 (1W+1S)

IPS BAMARALA

IPS BAMARALA to IPS PHAGALIYA (1W+1S)

IPS BAMARALA to IPS SOBHALA DARSHAN (2W+2S)

IPS BAMRALA to P-SR BAMARALA CL-06 (1W+1S)

IPS BAMRALA to P-SR MAYLON KI BERI CL-12 , P-SR BHAWANIPURA CL-11 , P-SR CHALKANA CL-10 (1W+1S)

IPS BAMRALA to P-SR BHARTHE KI BERI CL-07 , P-SR MOTI KI BERI CL-08 , BHAGBHARE KI BERI CL-09 (1W+1S)

IPS BAMRALA to P-SR SHERPUR CL-13 , P-SR AAKAL CL-14 , P-SR KHARADER CL-15 route 29 LPS / 68 m head/37 KW (1W+1S)

IPS SOBHALA DARSHAN

IPS SOBHALA DARSHAN to IPS DHANAOO (2W+2S)

IPS SOBHALA DARSHAN to CPS SERWA (1W+1S)

IPS SOBHALA DARSHAN to P-SR ROHILA CL-57 , P-SR SONRI CL-58 , P-SR DOB KI BERI CL- 59 , P-SR PABUBERI CL-60 (1W+1S)

IPS SOBHALA DARSHAN to P-SR SHOBHALA DARSAN CL-56 , P-SR MANDON KI BERI CL-61 , P-SR BHOONIYA CL-62 (CH-2) (1W+1S)

IPS PHAGALIYA

IPS PHAGALIYA to CPS FAKIRON KA NIWAN (1W+1S)

IPS PHAGALIYA to CPS SATA (1W+1S)

IPS PHAGALIYA to P-SR PHAGALIYA CL-19 (1W+1S)

IPS PHAGALIYA to P-SR GANGASARA CL-20 , P-SR GORA CL-21 (1W+1S)

IPS PHAGALIYA to P-SR PANORIYA CL-16 , P-SR BOLI CL-18 , P-SR KHARI CL-17 (1W+1S)

CPS SERWA

CPS SERWA to P-SR SERWA CL-48 (1W+1S)

CPS SERWA to P-SR SAMAWALI CL-49 , P-SR SAMON KI DHANI CL-50 , P-SR BHANWAR CL- 52 (1W+1S)

CPS SERWA to P-SR SALRIYA CL-51 , P-SR SINHAR CL-54 , P-SR BEESASAR CL-55 (CH-2) (1W+1S)

CPS SERWA to P-SR KUNDANPURA CL-53 (1W+1S)

CPS SATA

CPS SATA to P-SR SATA CL-22 , P-SR RANWA CL-27 , P-SR NAWAPURA CL-28 (1W+1S)

CPS SATA to P-SR GANGASARIYA CL-29 , P-SR TARLA CL-30 , P-SR BHANWARIYA CL-31 , P- SR GIRA CL-32 (1W+1S)

CPS SATA to P-SR ARTI CL-35 , P-SR MEETHRI CL-34 , P-SR CHHOTA HATHLA CL-33 (1W+1S)

CPS SATA to P-SR BAKHASAR CL-23 , P-SR BHALGAON CL-26 , P-SR TAREESARA CL-24 , P- SR BAWARWALA CL-25 (1W+1S)

CPS FAIKORON KA NIWAN

CPS FAIKORON KA NIWAN , P-SR MOOLANI CL-36 , P-SR JHARPA CL-40 , P-SR NAWATALA BAKHASAR CL-41 , P-SR BHARA CL-42 (1W+1S)

CPS FAIKORON KA NIWAN , P-SR BAMARLADER CL-38 , P-SR SINHANIYA CL-37 , P-SR BHADA CL-39 (1W+1S)

CPS FAKIRON KA NIWAN , P-SR HARPALIYA CL-45 , P-SR SUJON KA NIWAN CL-43 , P-SR SARLA CL-47 , P-SR SARAIYON KA TALA CL-46 (CH-2) , P-SR DEEPLA CL-44 (1W+1S)

Overhead Treverssing Crane Semi Electrically operated of suitable capacity along with MS girders, MS rails, electric hoist, chain etc. at following locations:-

RD 74 Km RWPS

RWPS at Aleti

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Submersible Drain pumps of Minimum 3 m3/hr capacity @ 10 meters head at following locations:-

RD 74 Km RWPS

RWPS at Aleti

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Continuous type Electro chlorinator (1 working+1 standby) of suitable capacity (The capacity of Electro-chlorinator shall be minimum 2 kg/Hr, But the bidder has to work out the capacity of Electro- Chlorinator based on demand and tail end residual chlorine requirement of Minimum 0.2 ppm) including all required pipe fitting, accessories, valves, Brine Tank (HDPE material) of required capacity, level and Temperature sensors, pumps, Rotameter, Electrolyser, Hypo tank (HDPE Material), Blower, acid tank and pump, DC rectifier cum Control Panel and all required power and control cables complete for post chlorination/disinfection at following locations:-

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Electrical WORKS:-Design, Provide , Installation, Testing, Commissioning for following as per Employer requirement and Specification (From JdVVNL End to Motor Panel)

Distribution Transformers (1W+1S) including all other accessories and protection devices complete at following locations with Minimum Rating (subject to as per design & ER):-

33/6.6 KV at RD 74 Km RWPS

33/0.415 KV at RD 74 Km RWPS

33/0.415 KV at Aleti HEAD WORKS

33/0.415 KV at IPS BAMARALA

33/0.415 KV at IPS PHAGALIYA

11/0.415 KV at CPS SATA

11/0.415 KV at CPS FAKIRON KA NIWAN

11/0.415 KV at CPS SERWA

33/0.415 KV at CPS IPS SOBHALA DARSHAN

33 KV, Switch board ( HT VCB panel ) with all required protection, equipment, Instrument, accessories, battery with charger, DCDB etc for 33/6.6 KV substation at Following Locations (subject to as per design & ER):-

RD 74 Km RWPS

33 KV, 630 Amp Switch board ( HT VCB panel ) with all required protection, equipment, Instrument, accessories, battery with charger, DCDB etc for 33/.44 KV substation at Following Locations:-

RD 74 Km RWPS

RWPS at Aleti

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

CPS IPS SOBHALA DARSHAN

11 KV, 630 Amp, Out Door type Ring Main Unit ( RMU ) including switch board HT VCB panel with 1 Incomer and 2 out going VCB with all required protection, equipment, Instrument, accessories, battery with charger, DCDB etc for 11/.44 KV substation at Following Locations:-

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

XLPE insulated H.T.cable for working voltage 33 KV from JdVVNL end point to HT panel and from Panel to transformer along with all necessary accessories, complete for following locations:-

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

CPS IPS SOBHALA DARSHAN

XLPE insulated H.T.cable for working voltage 11 KV from JVVNL end point to RMU and from RMU to transformer along with all necessary accessories, complete for following locations:-

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Maintenance free gel earthing for Electrical sub stations (No. of earthings as per design requirements)as at following locations:-

RD 74 Km RWPS

Aleti HEAD WORKS & RWPS Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

All civil works related to electric sub station including GSS lattice structure, if required,transformer foundation with divide wall, oil collection sump, Piping, Chain link fencing with gates, Spreading of gravel in the sub Station areas, Civil works required for laying of cables ( Trenching/ Trey) etc, for following location

RD 74 Km RWPS

Aleti HEAD WORKS & RWPS Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Design, Provide , Installation, Testing, Commissioning for following as per Employer requirement and Specification ( Onwards to Motor Panel)

HT&LT switchgear housing two incomers ACBs,MCCBs,relays,metering system,CT,PT,Bus Bar,Bus Couplers etc.with requisite numbers of outgoing cubical to have Motor control unit with starters for all LT motors of main pumps, for electric actuators and Hoist, Main lighting distribution panel for inside as well as out side pump room, welding socket, spare cubicals,switchgear for DG system, complete in all respect for following location .

RD 74 Km RWPS

HT&LT switchgear housing two incomers ACBs,MCCBs,relays,metering system,CT,PT,Bus Bar,Bus Couplers etc.with requisite numbers of outgoing cubical to have Motor control unit with starters for all LT motors of main pumps, for electric actuators and Hoist, Main lighting distribution panel for inside as well as out side pump room, welding socket, spare cubicals,switchgear for DG system, complete in all respect for following location .

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

APFC Panel with Capacitor Bank at following Pumping Station

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Local push button station for pump motors, actuators, Hoist At all locations of Pumping Station

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

110V DC system with batteries, battery charger, DC DB in panel to operate spring charging motors and LED supply on LT panel At following pumping station .

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

LT cable with Accessories, cable trays/Trenching for motors and all Electrical equipments to be provided in Head works at Following Locations

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Exhaust Fans, Pedestal type air circulator, other ventilating arrangement for Following Pump Station

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Earthing system for LV systems and motors installed in the contract in the Head works At

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

All Solar based Pumping Stations

Diesel generating set of respective minimum capacity including all associated accessories for lighting load At following locations:-

62.5 KVA at Aleti Headworks & RWPS Aleti

25 KVA at RD 74 Km RWPS

5KVA at IPS BAMARALA

5KVA at IPS PHAGALIYA

5KVA at IPS SOBHALA DARSHAN

5KVA at CPS SATA

5KVA at CPS FAKIRON KA NIWAN

5KVA at CPS SERWA

Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.

P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning Hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. LED street light fixture 150 watt

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

All Solar based Pumping Stations

BILL 5- Instrumentation

Setting up of Master Control Station (MCS) : Complete Automization, PLC and SCADA system including central processing unit, memory unit, Input/Output modules, requisite hardware and software, Communication system, Instrument Control Panel (I.C.P.) / Control Desk, (MMI) consisting of required Personal Computers with colour monitors, printers, UPS, all transducers and transmitters etc. SCADA software and its installation with required software, complete in all respect including air conditioners at WTP Aleti Administrative Building as per General and Particular Specifications and Employer's requirement

Setting up of Local Control Station (LCS) : Complete Automization, PLC and SCADA system including central processing unit, memory unit, Input/Output modules, requisite hardware and software, Instrument Control Panel (I.C.P.) / Control Desk, MMI), consisting of one Personal Computer with printers, UPS, all transducers and transmitters, communication or internet System etc. SCADA software and its installation with required software complete in all respect at following locations as per General and Particular Specifications and Employer's requirement

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

AT BARMER

At CHOUHTAN

Setting of remote Station and instrumentation control panel including all necessary hardware and software, instrumentation and control cable of LT power Cabling, LT Panel, Battery backup and UPS with 2 hrs battery backup complete for transferring the data as well as operation and control through SCADA of Flow Control Valves from Local/Master control Station (These are such where power connection is going to be available viz. near inlet of ESR having FCV).

Setting of remote Station including all necessary hardware and software, instrumentation, with solar power system with 24X7 backup or Battery backup complete for transferring the data to LCS and MCS (These are such where power connection is not going to be available viz. near inlet of ESR not having FCV plus Village Transfer Chambers & solar PS CWR).

Providing, Installation, testing, commissioning of Following Instrument as per Employer requirement and Specifications:-

for the WTP

Ultrasonic flow meters with transmitter for inlet and outlet channels with all accessories

Bulk flow meters for air pipe and wash water pipe with all accessories

Mechanical flow measuring system with all accessories at the parshall flume

Ultrasonic type level sensor, transmitter with switch in the sump for atomisation of backwash pump.

Ultrasonic type level sensor, transmitter with level switch in backwash tank for atomisation of backwash pump

External cage type magnetic level sensors, transmit or with switches in all solution tanks of Alum/PAC, lime and sludge thickening compound for automisation of dosing pumps

Sensors , Transmitter for Differential Head across Filter Beds

PH meter with transmitter for continuous monitoring at inlet and outlet

Continuous turbidity meter with transmitter at inlet and outlet

Continuous Residual Chlorine sensor with transmit or at the outlet

Portable pH meter, Chlorine Sensor and turbidity meters

IACC Panel with a automation components such as PLC and associated Digital Input/output subsystems, power supply unit, switches, indicators etc., along with Local SCADA System at following locations:-

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

at BARMER

At CHOUHTAN

Control cables, cable trays, support, Accessories, Glands, Work to complete in all respect at following locations:-

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

at BARMER

At CHOUHTAN

UPS / Invertors with 2 hrs battery backup to supply power to all Instrumentation system, complete at following locations:-

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

BARMER CR

CHOUHTAN CR

Solar based Pumping Stations

Pressure Gauges at individual delivery and Header at following Pumping Station locations:-

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Solar based Pumping Stations

Ultrasonic level indicators with Sensor and Switches at sump, Pressure Sensors, Transmitters and Switches on delivery header, Temperature sensors with transmitter for motors, with all required components and associated erection hardware as well as accessories as per the requirements at following Pumping Station locations:-

RD 74 Km RWPS

Aleti HEAD WORKS

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

FOR RESERVOIRS

Ultrasonic Level Indicator, transmitter, Sensor with all required components and associated erection hardware as well as accessories at following CWR locations:-

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Ultrasonic Level Indicator, transmitter, Sensor with all required components, with solar power supply & battery backup system and associated erection hardware as well as accessories at following ESR/CWR locations:-

AT all ESRs

AT all solar powered PS CWRs

Electro-magnetic flow meters, transmitter, flow Integrator ( Digital display in Instrument Panel in Control Room) with required specials, fittings, supports etc.. complete in all respect of following NB:-

100 mm dia

125 mm dia

150 mm dia

200 mm dia

300 mm dia

350 mm dia

400 mm dia

450 mm dia

500 mm dia

700 mm dia

700 mm dia

900 mm dia

1000 mm dia

1200 mm dia

Battery Operated Woltman type In-Line flow meters with GSM/GPRS based communication model, battery with accessories, fittings, valves (upstream and downstream to the Flow meter), dismantling joints, Air valves, specials, pressure gauge, anchor block, supports, complete in all respect at all VTC (Size of flow meters shall vary from 80mm to 200 mm as per minimum flow velocity requirement of flow meter)

Electronic Sound level Meter, Electronic virabation meter & Electronic Temparature meter and any other instuments/items/tools required for smooth running & daily monitoring/ routine maintenance of pump motors/headworks other than specified in BOQ.

RD 74 Km RWPS

Aleti HEAD WORKS & RWPS Aleti

RWPS at Aleti

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

BILL 6- VILLAGE DISTRIBUTION

20 KL to 100 KL

Providing, installation, testing and commissioning of AC submersible/ monoblock pump sets with HDPE/GI/MS/DI pipe fittings and individual solar pump controller (1w+1s) with Maximum power point tracking (MPPT) for optimally use the solar panel and maximize water discharge to deliver maximum water during the day including PVC flat submersible cable from controller to motor pumps. Solar pump shall be of Stainless steel construction and performance shall be as per scope of work and minimum lift of water shall be as per defined in scope. Pump controller shall have Adequate protection against dry operation of motor pump set, and against hails and storms. Full protection against open circuit, accidental short circuit and reverse polarity should be provided. A good reliable on/off switch be provided. The cable shall be ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date ( standard insulation) and conductor as per class 5 of IS 8130:1980 or amended up to date. The entire work shall be executed as per technical specification and direction of Engineer in charge.

up to 5 HP

5 HP to 7.5 HP

7.5 HP to 10 HP

2.17/Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, DOL starter, overload relay, ampere Mtr, volt Mtr, phase preventer, phase indicators, lighting arrangement etc complete suitable for three phase pump Set. The panel should have space for energy Mtr ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 300mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy Mtr with glass for Mtr reading. The operation of panel should be suitable for on 440 Volt AC Supply.

Up to 5.00 HP

2.18/Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere Mtr with CTs, volt Mtr, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump Set. The panel should have space for energy Mtr ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy Mtr with glass for Mtr reading. The operation of panel should be suitable for on 440 Volt AC Supply.

Above 5 HP and up to 20 HP

Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.

3 core 4.0 Sq.mm

Supply, installation, testing and commissioning of MNRE approved off Grid Solar Panels for running of motor pumps with 25 years of Linear Generation warranty, Work includes designing of solar panel area, MS fabricated structure 120 micron hot dip galvanized iron, fencing, showing arrangement of panel in available space and installation of PV module on frame structure such that minimum height of lower edge of panel shall be 4.0 mtr from ground level to safeguard against damage and theft as per indicative drawing enclosed with the bid document. The foundation of structure shall be in RCC. Mounting structure shall be suitably designed to withstand wind velocity up to 150km/hr. The work shall be executed as per detailed technical specifications, approved drawing and direction of Engineer in Charge. Note: There shall be 5 year service warranty for solar panel and mounting structure and suitable provision shall be included in tender document.

Construction of Pump House in Stone/Brick Masonry of min. 2.5m x 2.5m size, pump house building to accommodate SOLAR pump & panel & controller sets, with associate Electrical / Plumbing work. This shall include Civil works required for erection of chainpulley and Supply & fixing of chanipulley 2MT, installation of pumps and panels, cable trenches, drainage, access platforms, ladders, thrust/anchor blocks, pipe supports, Pipes and specials, rain water harvesting & collection system for rain water from pump house roof to the sump complete in all respect as per employer's requirement and Specifications at following location

Providing service connection as per technical specification and standard drawing as per relevant IS code (amended up to date) from all kind of water mains up to consumer Mtr/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (muram/soft rock/hard rock) including demolishing of cement concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 Mtr ; providing & fixing of all fitting using PP mechanical Integrated saddle with inbuilt flow control valve made out of SS316 designed for 5 LPM discharge at 0.5 bar pressure , not exceeding the flow of 7 LPM at 2 bar and a compression elbow, moulded in single piece/ fusion welded (Complete job). providing & fixing of all fitting duly approved in accordance with specification for potable water including GM Full-way Valve (IS:778 Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using PPR-C pipe with standard PPR fittings/ GI pipes in the premises for fixing a tap. P&F a Bib Cock (IS : 8931 Mark) superior quality Brass 400 gm,15 mm nominal bore including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bituminous roads where minimum depth shall be 20 cm. Including Road cutting for house hold service connection in minimum trench width wherever road crossing is required. Road cutting of cement

Average length up to 05 mtr 20 mm dia MDPE pipe/ 15 mm GI class B pipe

Extra length of 20 mm MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr.

BILL 7 - Civil AND ANCILLARY WORKS

Construction of Office Building (Minimum Area 1830 Sqft) with furniture including air conditioners as per Employer requirement, Specification and tender drawings.

Construction of J-2 Type Set (Twin quarter) at various headworks as per Employer requirement, Specification and tender drawings

Construction of Engineer residence including air conditioners as per Employer requirement, Specification and tender drawings

Campus area Development Works by landscaping, Horticulture, Drainage, External campus lighting etc and any other item other than specified in BOQ. as per Employer requirement and Specification at following Campuses:-

RD 74 Km RWPS

Aleti HEAD WORKS

IPS BAMARALA

IPS PHAGALIYA

IPS SOBHALA DARSHAN

CPS SATA

CPS FAKIRON KA NIWAN

CPS SERWA

Construction of Boundary wall, installation of MS Gates (Man and Animal Obstruct with Minimum Weight 450 Kg ) and Approach Roads as per Employer requirement and Specification for various PS head works, ESR campuses, VD CWRs etc.

Boundary Wall

MS Gates

Cement Concrete roads within campuses

Gravel roads for approach to ESRs

Construction of HT/ LT/ switchyard panel Room with all facilities (Minimum plinth area 25 Sqmtr) as per Employer requirement and Specification

Construction of Store builindg with all facilities (Minimum Area 50 Sqm with on side Kota stone shelves 1.0m deep from top to ground level on a long wall) as per Employer requirement and Specification

Construction of Local Control Station with all facilities (LCS) building of minimum 30 sqm area complete in all respect including air conditioners as per Employer requirement and Specification at Barmer & Chouhtan

Construction of Village Transfer chamber (VTC) complete in all respect as per the tender drawing, complete in all respect as per Employer requirement and Specification.

BILL 8 - SPARE PARTS, TOOLS AND TACKLES

Supply of spares for mechanical works for all pumping stations as per scope of work and specifications given.

Supply of spares for electrical works for all pumping stations as per scope of work and specifications given.

Supply of spares for instrumentation works as per scope of work and specifications given.

Supply of spares for pipeline works as per scope of work and specifications given.

Supply of tools and tackles as per scope of work and specifications given.

Supply of retractable aluminum ladder 4.5m length at all PS

BILL 9 - PRICE SCHEDULE-OPERATION & Maintenance SERVICE (SECTION II)

OPERATION & MAINTENANCE SERVICE AFTER DEFECTS LIABILITY/NOTIFICATION PERIOD OF ONE YEAR

Operation and Maintenance (AFTER DEFECTS LIABILITY/NOTIFICATION PERIOD OF ONE YEAR) of Pipeline up to VTC, CWRs, ESRs, pump houses,WTP, EMI Works, include all type of materials/chemicals/fuel (disinfactant/chlorine gas, & coagulant/PAC/Alum, etc) required for O&M service, Electro chlorinators at pumping stations etc of the whole WSS system/works (except Jdvvnl electricity bill /charges & WRD canal water bill/ charges ) as per Employer requirement and Specification for:-

1st Year

2 rd Year

3 rd Year

4 th Year

5 th Year

6 th Year

7 th Year

8 th Year

9 th Year

10 th Year