Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹3.9 L
Closing Date
23 Jul 2026, 2:25 pmClosed
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
Expenditure
General
M&P
2 conditions
Bulk quantity order(s), constituting Minimum 80% of the Net Procurable quantity (NPQ), against the tender shall be placed on the manufacturers or its authorized agents who have successfully supplied either a) Minimum 20% of the overall tendered quantity of the NIT(The term overall tendered quantity means total tendered quantity of all the variants included in the tender.) against any single order. Orb) Minimum 30% of the overall tendered quantity of the NIT(The term overall tendered quantity means total tendered quantity of all the variants,included in the tender.) against multiple orders, on cumulative basis of the tendered item or its variant to Zonal Railways/PUs/CORE/PSUs/Other Central Govt.Department/Metro Railway, in last three financial year and current financial year up to the date of tender opening. The variant of the tendered item in above clause would mean an item/items having same basic/generic description as mentioned in the tender but may have any of the following variations - i) Same Specification as tendered item but any other revision or any other size ii) Same drawing number as mentioned in the tender but a different Alteration
Supporting documents as proof of credentials shall be submitted by the bidder along with their offer and the onus to prove successful supply in the stipulated time frame lies on the bidder. Offers submitting credential orders unaccompanied with proof of suuply are liable to be ignored.
29 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection clause- (1) Inspection - Third party Inspection(TPI) for indigenous makes/brands (2) Third Party Inspection against GC/TC may be considered for foreign make/brands(works address not located in India),Indian vendors supplying foreign goods or Goods having large foreign content. Documentary evidence will be required to be produced at the time of inspection for the part/whole assembly which has been claimed a foreign part/whole assembly.
1.Wherever the inspecting authority is specified in the tender documents, bidders are advised to quote accordingly. Offer with any deviation from inspection clause (as per applicability detailed in inspection clause) mentioned in tender will be summarily rejected 2. With respect to the TPI inspection specified in the NIT, if offer is received with Visual inspection by TPI OR TPI inspection against GC/TC/WTC, the same will be treated as deviation in inspection clause except for cases covered under the scope of Inspection clause(clause 02 indicated in inspection clause)
Tenderer should mention in their offer:-1.Name of manufacturer with complete address. 2. Place of inspection be indicated with complete address. Option for inspections at warehouse or godown shall be strictly avoided, and preferably be permitted only at manufacturers place.
1 location across Rajasthan · 56 Set total
Set of TUNGSTEN CARBIDE TIPPED TAMPING TOOL FOR MFI MACHINES. EACH SET
60251342B
60251342B
Open - Indigenous
Goods
Ajmer, Rajasthan
₹0
₹3.9 L
23 Jul 2026
15 Jun 2026
6 items · 56 Set total
Set of Tungsten Carbide tamping tool (TCTT) for tamping unit of Unimat-4S . One set co nsisting of 16 Nos. tools of following items:- (i) Modified carbide tamping tool as per Plasser Part No. C U-30-6820-BE-FR= 08 Nos. (ii)Modified carbide tamping tool as per Plasser Part No. CU-30- 6220-BE= 08 Nos. RDSO SPECIFICATION: TM/HM/6/320 (Rev-3, July-2019) RDSO DRAWING: RDSO/TM/01A/16 (Re v-1) & RDSO/TM/01B/16 Acceptable Make/Brand: - Plasser or Equivalent. ]
| Delivery Location | State | Quantity |
|---|---|---|
| GENERAL STORES DEPOT AJMER, NWR | Rajasthan | 4.00 Set |
| Total | 4 Set | |
Set of modified Tungsten carbide tamping tool for CSM/DUO. One set consisting of 32 N os. tools of following items:- (i) Modified carbide tamping tool confirming to Plasser Part No. CU-30-10 840-FR-I= 08 Nos. (ii) Modified carbide tamping tool confirming to Plasser Part No. CU-30-10840-FRII= 08 Nos. (iii) Modified carbide tamping tool confirming to Plasser Part No. CU-30-10840-FR-III= 08 Nos. (iv) Modified carbide tamping tool confirming to Plasser Part No. CU-30-10840-FR-IV= 08 Nos. RDSO S PECIFICATION: TM/HM/6/320(Rev-3, July-2019, RDSO DRAWING: RDSO/TM/15A/16 , RDSO/TM/15B/16, RDSO/TM/15C/16 and RDSO/TM/15D/16 Acceptable Make/Brand: - Plasser or Equivalent. ]
| Delivery Location | State | Quantity |
|---|---|---|
| GENERAL STORES DEPOT AJMER, NWR | Rajasthan | 5.00 Set |
| Total | 5 Set | |
Set of tungsten carbide tamping tool (TCTT) for Unimat 2S/3S . One set of tungsten carb ide tamping tools consists 16 Nos of following tools:- 1. Small as per 2W.31.41B - 08 Nos. 2. Big as per W37-1320 - 08 Nos. RDSO SPECIFICATION: TM/HM/6/320(Rev-3, July-2019). RDSO DRAWING: RDSO/TM /01A/16(Rev-1) & RDSO/TM/01C/16. Acceptable Make/Brand: - Plasser or Equivalent. ]
| Delivery Location | State | Quantity |
|---|---|---|
| GENERAL STORES DEPOT AJMER, NWR | Rajasthan | 5.00 Set |
| Total | 5 Set | |
Set of TUNGSTEN CARBIDE TIPPED TAMPING TOOL FOR MFI MACHINES. EACH SET CONSI ST OF 16 Nos. FOLLOWING THREE TYPE OF TAMPING TOOL. (1) TAMPING TOOL (TYPE-I) as per PLASSE R PART NO.CU30.6840.FRI, QTY.=04NOS./SET (2)TAMPING TOOL (TYPE-II) as per PLASSER PART NO.C U30.2743.FRI, QTY.= 04 NOS./ SET. (3)TAMPING TOOL (TYPE-III) as per PLASSER PART NO.CU30.10840 .FRI, QTY.= 08 NOS./SET. RDSO SPECIFICATION: TM/HM/6/320(Rev-3, July-2019). RDSO DRAWING: RDS O/TM/01A/16 (Rev-1), RDSO/TM/01B/16 & RDSO/TM/15A/16. Acceptable Make/Brand: - Plasser or Equiv alent. ]
| Delivery Location | State | Quantity |
|---|---|---|
| GENERAL STORES DEPOT AJMER, NWR | Rajasthan | 16.00 Set |
| Total | 16 Set | |
Set of Tungsten carbide tamping tools CSM/DUO[OLD] TCTT. One set consists 32 Nos of following tools:- 1. As per CU.30.4020-BE-FR-I - 16 Nos. 2. As per CU.30.4020-BE-FR-II- 04 Nos. 3. As pe r CU30.4020-BE-FR-III- 04 Nos. 4. As per CU.30.4020-BE-FR-IV- 08 Nos. RDSO SPECIFICATION: TM/HM/6 /320(Rev-3, July-2019) RDSO DRAWING: RDSO/TM/14A/16(Rev-1) , RDSO/TM/14B/16(Rev-1), RDSO/TM/ 14C/16(Rev-1) & RDSO/TM/14D/16(Rev-1). Acceptable Make/Brand: - Plasser or Equivalent. ]
| Delivery Location | State | Quantity |
|---|---|---|
| GENERAL STORES DEPOT AJMER, NWR | Rajasthan | 16.00 Set |
| Total | 16 Set | |
Set of Modified Tungsten Carbide Tamping Tool for Tamping Express 3X type machine. One set consisting 48 Nos. of following items (i) Modified Tungsten carbide tamping tool as per Plasse r part no.CU30.8820-W-FR-I =32 nos. (ii) Modified Tungsten carbide tamping tool as per Plasser part n o.CU30.8820-W-FRV=16 Nos. RDSO SPECIFICATION: TM/HM/6/320(Rev-3, July-2019). RDSO DRAWING: RDSO/TM/15A/16 & RDSO/TM/15E/16. Acceptable Make/Brand: - Plasser or Equivalent. ]
| Delivery Location | State | Quantity |
|---|---|---|
| GENERAL STORES DEPOT AJMER, NWR | Rajasthan | 10.00 Set |
| Total | 10 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5539748.pdf
ATTACHMENT
5802936.pdf
ATTACHMENT
5659449.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .