Transportation, installation, necessary fabrication, commissioning and trial run including extension of one no. 1000mm width, 1x90kW, 550V, single drive belt conveyor along 74L from 5R to 11R after dismantling of 5D belt for development of Panel-10 i

Amount

Part A:Dismantling of 207 mtr 1000mm width 1X90kW ,550V single drive 5D belt Conveyor complete from 80L to 86L at RVIIA seam

Dismantling of the 1000mm width, 1x90kW, 550V, single Drive Head unit Complete with Drive Drum, Driven Drum, Gear Box, Motor, Couplings, Bearing Blocks, baseplate, fencing etc. of 5D belt conveyor from 5D/81L

Dismantling of the complete Discharge Unit with strike plate & chute plate of 1000mm width 5D belt conveyor from 5D/80L

Dismantling of the complete loop take up unit of 1000mm width 5D belt conveyor from 5D/(81L-82L)

Dismantling of the complete tail end unit of 1000mm width 5D belt conveyor from 5D/88L

Dismantling of 207 mtr. 1000mm width 5D belt conveyor structure complete with stringer, foot stool, top bracket, top roller, bottom roller, decking plate, scrapper etc. from 5D/80L to 5D/86L

Unlapping & pulling out of 432 mtr. 1000mm width PVC belting of 5D belt conveyor from 5D/80L to 5D/86L

Dismantling of pull cords with cable, communication devics with cable for a length of 207 belt conveyor of 5D belt from 5D/80L to 5D/86L

PARTB. Transportation & installation of one no. 1000 mm width, 1x90kW, 550V, single drive belt conveyor for a length of 103.5 mtr. along 74L from 74L/5R to 74L/8R in R-VIIA seam at 3&4 Incline, J.P.Colly.

Transportation of the 1000mm width, 1x90kW, 550V Drive Head complete including gear box, motor, couplings, bearing blocks, fencing etc. from 5D belt dismantling site and installation at 74L/6R with necessary fabrication job

Transportation of Discharge Unit complete with girders, strike plate, chute plates, scrappers etc. from 5D belt dismantling site and installation at 74L/5R with necessary fabrication job

Transportation of Loop Take Up Unit complete with motorized winch from 5D belt dismantling site and installation at 74L/(6R-7R) with necessary fabrication job

Transportation of Tail End Unit complete from 5D belt dismantling site and installation at 74L/8R with necessary fabrication job

Transportation of 103.5 mtr. 1000 mm belt conveyor structure complete with stringer, foot stool, top bracket, top & bottom roller etc. from 5D belt dismantling site to 74L belt installation site and installation from 74L/5R to 74L/8R in R-VIIA seam

Loading, transportation and unloading of one ACB (550V/200A), starter (550V/90kW), LS unit, Winch starter from 5D belt, 5D/81L to 74L/6R with help of haulages & 30 mtr. manually

Transportation of 200 mtr. 3.3kV grade 70 sq.mm. PVCDWA cable from 5D belt to 74L/6R with help of haulages

Laying-hanging of 200 mtr. 3.3kV grade 70 sq.mm PVCDWA cable from 78L/4R ACB to 74L/6R ACB manually

Transportation of 225 mtr. 1000mm width PVC belting from 5D belt dismantling site to 74L belt installation site with help of haulages & 30 mtr. Manually

Laying, lapping, jointing & tensioning of this 225 mtr. 1000mm width PVC belting in proposed 74L belt

Transportation of pull cords with its cable, communication devices with its cable, signalling system from 5D Belt dismantling site to 74L belt installation site with help of haulages for 103.5 mtr. and laying-placing them from 74L/5R to 74L/8R

Testing, trial run, alignment & commissioning of this belt conveyor from 74L/5R to 74L/8R

Supply of DA Cylinder

Supply of Oxygen Cylinder

Supply of MS Nut and bolt 5/8" X 2"

Supply of 5 Ton turn buckle

PART C:Three times extension of proposed 74L belt conveyor from 74L/8R to 74L/11R length of 103.5 mtr in RVIIA seam

Transportation of 1000mm belt structures (i.e. foot stools, channels, brackets, top and bottom rollers etc.) for a length of 103.5 mtr. from 5D belt dismantling site to belt extension site by haulages and installation them from 74L/8R to 74L/11R in R-VIIA seam during three times belt extension (each time belt extension will be for a length of 34.5 mtr.)

Three times dismantling, transportation and installation of tail end unit complete from 74L/8R to 74L/11R for three times 74L belt extension

Transportation of 207 mtr. 1000mm PVC belting from surface through haulages & 30 mtr. manually to 74L belt extension site

Laying, Lapping, Jointing & Tensioning of this 207 mtr. 1000mm belting from 74L/8R to 74L/11R in R-VIIA seam during three times belt extension and trial run

Transportation of pull cords with its cable, communication devices with its cable for 103.5 mtr. belt from 5D belt to 74L belt extension site and laying & fitting them during three times belt extension

Supply of MS Nut&Bolt of 5/8" X 2"

PART D:Civil foundation works for installation of 1X90kW, 550V, 1000mm wide belt conveyer drive head, discharge unit, loop take-up unit and platform for ACB, Starter for 74L belt conveyor of 3&4 incline, JPC.

Recess cutting in stone

Cleaning of Muck Debris

Sand filling

for Starter breaker

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).

12mm cement plaster of mix

Loading materials into tub and unloading at site

PART E. Roof heightening by drilling blasting in stone, cleaning, roof bolting including cost of drill rod, drill bit for installation of proposed 74L belt conveyor in R-VIIA seam of 3&4 incline under JPC.

Roof heightening by drilling, blasting in stone including dressing, Cleaning & cost of drill rod and drill bit. (Excluding cost of explosive & detonator).

Roof bolting including carrying of materials, drilling, grouting & cost of drill rod and drill bit

Total impact of GST for the purpose of CTC

BABLU SINHA (BID ID -1096291)

RINA ENTERPRISE (BID ID -1096580)